Not Booting after 10.5.8 combo update

Hello
I have noticed that after i ran the updater for 10.5.8 combo, this machine does not boot. I have target mode this computer to another and all the files/folders are there on the problem machine.
Any ideas what to do to get it to boot?
was thinking about running disk util/repair permissions on the problem machine through the use of target mode.
thanks
MArk

Definitely repair the hard drive and permissions via target disk mode. However, if it still does not boot you need to tell us exactly what happens and where it fails. "Does not boot" is not very informative.

Similar Messages

  • Not Booting after recent Security Patch/Java update

    My wife has experienced what many have experienced with the recent update.
    MacBook not booting after update (i.e. - "I have no name!")
    I have tried everything posted on this topic since 2/13/09, but without any success. Does anyone have the fix for this yet?
    Things I have tried:
    * I can boot in safe mode (holding "Shift" while restarting)
    * I cannot boot from an install disk(s) (holding C while restarting) - I have both a black one from purchase, and two gray ones with purchase from MiniMac
    * Booting with verbose - gets stuck at same place as everyone else
    Operating in safe mode:
    * I can run DU and "repair" drive
    * I can see and access the CD/DVD
    * I cannot see drive in target drive mode (doesn't ever connect the 2 systems)
    * I downloaded the update files from apple and reinstalled them individually (via USB ext Drive) with a reboot in between
    * I attempted to update & archive, but I cannot run install CD from any systems disks (see above)
    Has anyone figured out how to fix this yet?

    Same problem than the other guy who is not mentioning the update in the title.
    Powerbook 1.67.
    System log said "No user defined computer name" and "using blah blah name" or so.
    Mac Os X report (for apple) says:
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000003900FF1C PC=0x00000000008FC020
    Latest crash info for cpu 0:
    Exception state (sv=0x4299D280)
    PC=0x008FC020; MSR=0x00009030; DAR=0x3900FF1C; DSISR=0x40000000; LR=0x008FE348; R1=0x2C47B9F0; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x008FE348 0x008E0014 0x002E9A80 0x002EB94C 0x0008C248 0x00029234
    0x000233F8 0x000ABEAC 0xFF9BA29B
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeon9700(4.1.8)@0x8d8000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x85a000
    dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x87e000
    Proceeding back via exception chain:
    Exception state (sv=0x4299D280)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x43D0D000)
    PC=0x9000AF48; MSR=0x0200F030; DAR=0x0ECA77FE; DSISR=0x42000000; LR=0x9000AE9C; R1=0xBFFFD6C0; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
    Proceeding back via exception chain:
    Exception state (sv=0x4299D280)
    PC=0x008FC020; MSR=0x00009030; DAR=0x3900FF1C; DSISR=0x40000000; LR=0x008FE348; R1=0x2C47B9F0; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x008FE348 0x008E0014 0x002E9A80 0x002EB94C 0x0008C248 0x00029234
    0x000233F8 0x000ABEAC 0xFF9BA29B
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeon9700(4.1.8)@0x8d8000
    dependency: com.apple.iokit.IOPCIFamily(1.7)@0x48d000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.2)@0x85a000
    dependency: com.apple.iokit.IONDRVSupport(1.4.2)@0x87e000
    Exception state (sv=0x43D0D000)
    PC=0x9000AF48; MSR=0x0200F030; DAR=0x0ECA77FE; DSISR=0x42000000; LR=0x9000AE9C; R1=0xBFFFD6C0; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC

  • Hangs at boot after 10.5.8 combo update

    hi all,
    i just updated from 10.5.1 to 10.5.8 with the combo update. it now will just hang at the apple logo. i have a dual boot on the same drive with 10.4.11 thus i am able to post this.. disk utility finds no errors. reinstalling is last resort..
    see my sig for computer specs.
    thx in advanced

    Some general advice on updating:
    It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications and turn off energy saving and screensaver.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious! In fact a second restart can be recommended.
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a week or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    If you are updating Safari (or just have):
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • /Library/InputManagers
    • ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • Will not boot after 10.10.2 security update

    I downloaded the security update as usual. computer starts to boot back up, gray screen with Apple logo & progress bar gets 2/3 & stops.
    I restarted, used the disc utility to check & repair errors. nothing found. Re-installed os, but nothing works.
    i know this would be a pain, but if I remove the internal drive. Place a new on inside the machine & put the old one in an external enclosure. Install os on computer & drag old files from external drive. Would this work?
    thanks,
    matt

    I can get to the internet recovery, instal lion, but it won't install, says I have a newer version installed & it won't let me do anything.
    what do you suggest?

  • Keyboard volume controls not working after 10.5.7 combo update

    Actually, editing my original post, I now have to use the fn key aswell as F3, F4 and F5. Previously didn't need to use finger aerobics to change the volume, it wa done with one finger.
    Is there a way of changing it back ?
    Message was edited by: Airsculpture

    I have unchecked "Use all F1 etc keys as standard function keys" in keyboard prefs and we are back to normal.
    This has worked.

  • MacBook Pro will not boot after software update

    MacBook Pro will not boot after doing an Apple Software Update (of course they will not help you).  MONEY, MONEY, MONEY is the name of the game.  They can cause your computer to crash and still charge you! 
    Does anyone have an answer to why my computer is showing a little gear spinning for hours?  I have tried several things with NO luck.
    Thanks-

    Run through the list of fixes here
    Step by Step to fix your Mac

  • HP Pavilion 15-n268sa will not boot after windows update (windows 8.1)

    After a series of windows update (windows 8.1) my HP Pavilion 15-n268sa will not boot up, no fan noises, no lights no nothing. 
    I have tried a "hard reset" a number of times with no success. 
    When the battery is present the white LED flashes 3 times when the power button is pressed. 
    Please please help. 

    Hello Cuffy,
    Welcome to the HP Forums!
    I understand you notebook will not boot after a series of Windows updates.
    Can you tell me if you are able to access the HP Recovery Manager by repeatedly tapping the F11 key while the notebook turns on? If you can access this, try doing a system restore to before you installed the updates. If not I would suggest you go through this document: Computer Does Not Start and the LEDs Blink or the Computer Beeps.
    If it's the Caps Lock light that is blinking this document will tell you exactly what the error is (spoiler: 3 beeps is a memory failure). This could also explain the failed updates. The updates are stored in the RAM before being applied to the operating system.
    You can try reseating the RAM, or using only 1 of the RAM cards, as you have 2x4GB cards. If it still doesn't work with 1 card, try the other card to confirm it has failed.
    You can replace defective cards via HP Phone Support if covered under warranty or at the HP Part Store if not covered. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
    Hopefully this information helps!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Mac Mini will not boot after Security Update 2008-007

    Hello,
    A G4 Mac Mini machine I was asked to take a look at will not boot after the owner (succesfully) installed Security Update 2008-007 from Software Update. Booting always hangs at the blue screen after the Apple logo, and booting in verbose mode reveals that WindowServer is crashing repeatedly. Permissions and filesystems have been repaired, PRAM reset, etc. Safe boot also exhibits the same problem, but it is possible to boot to single user mode. Hardware checks out fine with diagnostic utilities.
    Any suggestions on how to fix this? Unfortunately, backups are not available (it's not my machine =).

    Hi Arkku , and a warm welcome to the forums!
    I'd certainly give Sig's advice a try first.
    If that should fail...
    applesetupdone...
    This was Posted by: JoseAranda at September 9, 2006 3:48 AM
    "OK, restart your computer, hold down Command-s and type in the following:
    /sbin/fsck -fy Enter
    /sbin/mount -uaw Enter
    rm /var/db/.applesetupdone Enter
    # The rm command is the remove command which deletes the file.
    # Robert: I'd rename the file via: mv /var/db/.applesetupdone /var/db/.applesetupdone.old
    reboot Enter
    Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
    end of posted by: JoseAranda"
    Reset OS X Password Without an OS X CD...
    http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/

  • Power Book G 4 wil not boot after oz update Snow leapard os

    Power book G4 did not boot after Lastesat Mozilla update,  Runing snow leapard, message updatenis not compatable  with computer tried to delete update, and will not boot from then on?

    You can't run Snow Leopard on a PowerBook G4.
    Please straighten your story out.

  • My Laptop B490 not booting after bios update

    My laptop not booting after updating bios i used windows 8 OS.
    I downloaded Bios from following link.
    Bios Download Link
    After updating bios, system restarted automaticaly, after that only power led is glowing, screen stays blank.
    Help me solve it.
    Solved!
    Go to Solution.

    hi sathish291
    Welcome to the Forums.
    Can you try the following:
    1. Power down the machine, remove the AC adapter and battery.
    2. Hold the power button for 30secs and reconnect the AC adapter only then turn the computer ON.
    If the machine still doesn't power up normally and boot into WIndows then it's likely that something went wrong (could be a bad BIOS flash or an internal component might have gone defective during or after the BIOS update). In this case, you may need to contact lenovo on how to go about getting the unit serviced.
    Support phone list
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Internet not connecting after ios 7.0.2 update on iphone 5

    Internet not connecting after ios 7.0.2 update on iphone 5

    Hi there PompasJr,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Camera isn't functioning
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    -Griff W.

  • HT4623 iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

    iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

    Obviously since you have iOS 7 you're a developer.  As a developer, you signed a NDA with Apple not to discuss the iOS on a public forum.  Please log in to the Developer Forum using your credentials and ask for help there, lest you risk having your credentials terminated.
    Thanks, and best of luck to you.
    GDG

  • My MacAir 1st gen. won't boot after latest OS X Lion update.

    My MacAir 1st gen. won't boot after latest OS X Lion update. tried safe boot(didn't work) tried disk repair, said it was successful, but my mac won't start up. Just get white screen.  Also been having trouble with it overheating. Fan seems to work. But when it get too hot whole interface slows down.

    Yikes, I hope you have AppleCare on it still, I think it needs to be taken in, but as a last ditch effort...
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.

  • Macbook Pro Will Not Boot After Full Timemachine Restore

    Hope someone can help. I upgraded my HD and attempted to restore from time machine. Everything appears to have worked well and the restoration was a success according to what the computer says. However, when I go to reboot I hear the startup sound then the apple pops up on the screen followed by a kernal panic error and the black box telling me that I need to hold down the start button and restart. I've tried resetting the pram, reinstalling from TM again and a couple of other things but it won't start up. I tried doing a clean install and it worked fine then I migrated files from my TM backup and that worked fine as well. However, that's not what I'm looking for, I wanted to get the machine exactly the way it looked before the upgrade and I thought TM was supposed to do that. I've read other forums were people have done it with no problems and am completely stumped at why it is not working. If anyone can shed some light I'd appreciate it.

    I booted with the CD and after selecting the language, went to the utilities pane and used the partition feature.
    Last night in desperation, I booted back to the CD and once again told it to do a full restore from TM. This was the third time that I had done it so far. The previous two times I had gone into the partition feature and partitioned the drive first. This time I skipped that step and just told it to restore from TM. It said if it did this it would erase everything on the drive. I agreed and let it do its work. This morning it once again, as in both previous times, said it had restored from TM successfully. I told it to restart and lo and behold, it booted and everything is just as I had it on the other drive.
    Needless to say, I'm confused but happy. I just wish I knew why it would not boot after restoring the previous two times? Maybe it just wanted me to spend more money:) I tried booting today only after I had gone to frys electronics and bought a SATA to USB cable and cloning software.
    Anyway, thanks for your help and if anyone knows why it wouldn't boot, let me know. It would be good to know for the future just in case. For anyone else having this trouble, keep trying. Third time was a charm for me.

  • My mac mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone

    My Mac Mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone. I had switched the start-up disk back to the original of course. Now all I see is the Apple logo. What should I do? Thanks in advance.

    Try disconnecting any external devices, especially hard drives
    and try rebooting.
    If that doesn't help, then :
    If you are running Lion, boot to the Recovery HD and run a
    Repair Disk on the OSX partition.
    If Snow Leopard, boot to the installl DVD and run Repair Disk.
    Also, you may want to bookmark this:
    http://reviews.cnet.com/8301-13727_7-57345273-263/troubleshooting-the-boot-proce ss-for-intel-macs/?tag=txt;title
    for future reference.  It is a pretty good explanation of the
    Mac boot process and how to identify where problems may be.

Maybe you are looking for