Not booting automatically from main HD

I'm not sure since when this happens, I don't frequently shut down my mac, once a week average.
When I shut down, it doesn't boot again from main HD, the rounding "loading gif" above the apple keep rounding forever. To start up I got to boot whit "Alt/Option" pressed and choose the same HD as start up system. In other words, it is not booting automatically (or is hanging) but it does manually. Why?
Important information: I'd replace my CDR Drive by a SDD and Installed Lion on id, leaving the original HD for storage only. Also it is reseting the hour and day every time, so I'm wondering if it is forgetting about the state of local drives and trying to boot from original HD that hasn't a system anymore.

Hi,
We also have the same approach of BP, CA and contract creation. These data, after creation in ISU are replicated to CRM. We had an issue while replicating the Contract. The contracts were not getting replicated if the contracts donu2019t have the Service Provider and external service provider information. We donu2019t require to capture this information at contract. We are now forced to capture have this information at contract level just for the replication purpose. Is it mandatory to have the service provider information in contract for the replication of contract to CRM.
Regards,
Murali

Similar Messages

HP pavilion g6 do not boot nothing from any media

Hi, I have this notebook (HP Pavilion g6-1010sc) and one day it do not boot nothing from any media.
I tried to boot linux, winxp, original win7-x64 from internal and external USB disks, but unfortunatelly.
Notebook restarts or freezes after i tried to boot OS. Start of booting OS is correct, in original win7 it asked to run system normally or launch system repair. After i choose normal startup, its normally starting and only one point of WIN7 loading logo is shown and after this freezes.
When I run win7 installation from USB HDD or launch system repair, windows loaded files correctly, but after this, system restarts and capslocks LED blink two or three times and notebook startup again.
I have on second USB HDD linux ubuntu, which work on every computer correctly, but on this computer it freezes after small time.
I tested Back Track5 from DVD and during boot notebook restarts after one minute too.
I have tried to remove original HDD and try boot other USB HDD/DVD too, but no change. I tried other memory modules, but no change too.
System diagnostics of RAM and HDD is correct and no problem found.
Original bios on this notebook was F6.A and I tried older version F53 and only one change is, that in booting is shown more piece of WIN7 boot logo, and again freezes.
I tried disable automatic restart after system failure, but notebook it does not react on this, when it want to restart or freeze, it does it
Sorry for my english

No, i do not think, that I have UEFI bios. After I pres ESC and after F2 or directly after turn on press F2, my diagnostic menu looks as this:
This diagnostic tool is stored on HDD, when I removed HDD, this tool can not to run.
(By the way, tests will be passed.)
And original system is WIN7x64 and on support page is only this system and cannot be selected other operating systems, e.g. WIN8, which fully supports UEFI.
This reply is no solution for me. I tested internal HDD in different computer and it is 100% correct, and RAM i tried to change with other 100% correct modules as I wrote on last post and no change.
This means, that RAM and HDD is correct. I want to know, whether is error in notebook's mainboard or bios or some different.
I think, I am not first with such problem, and I do not want know solution only, but I want also know reason.
Thanks for reply, but it is no solution for this problem, and is outside.

Will not boot up from DVD drive

HP pavilion slimline s3200n will recognize the DVD drive but it will not boot up from the drive

Hi,
Try hitting the escape button from boot up. It normally gives you the boot options where you can select the DVD drive.
If you can't get into the boot options, try getting into the bios with F10 and change boot order options.
Greetings
Philippe
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!

TS1367 my laptop will not boot up from the storage hard drive but if i remove it from the laptop and connect it as portable hard drive my laptop boot up normal?

my laptop will not boot up from the storage hard drive but if i remove it from the laptop and connect it as portable hard drive my laptop boot up normal?

Do you have a compatible OSX installed on this 'storage' HDD? If not, it will not boot your MBP.
Ciao.

IMac 27 inch i7 OSX Lion will not boot up from Hard Disc

iMac 27 inch i7 OSX Lion will not boot up from Hard Disc on cold start, and cannot find wifi hardware in the machine. Restart and everything is fine. I have two machine and they behave the same. Software or hardware problem?

First of all, try a hard restart; making sure no disks are in the slot, unplug everything from your computer (keyboards, mice, etc.) and then unplug the computer itself. Leave it unplugged for a minute or two, then plug it back in and boot it up.
If that fails, reboot it while holding down the option-key on your keyboard. The screen should show a choice of which disk drive to boot from. Choose your usual drive.
If that fails, reboot it while holding down the shift-key on your keyboard. It should take a while for it to boot up, as it is destroying all connections to sources that may contain a virus.
If that fails, reboot it while holding down keys "option-command-P-R" until you hear the startup tone a second time.
If that fails, reboot it while holding down the C-key. Make sure you have inserted the installation disk before doing this step.
If that fails, reboot it while holding down the command-key and the R-key.
If that fails, please reply to this and let me know.

V3-5727105 will not boot up from HDD or from Recovery CD.

4 weeks ago when I switched on my laptop I got a blue screen message during start-up saying a problem had been encountered and it needed to restart to try to fix the problem, then just a dark grey screen and nothing.Laptop is only 7 months old. Contacted Tech Support and they stated I needed Recovery CDs and provided me with a set after I paid £60.Tried to boot from Recovery CD and got Acer Recovery Management to load, but after selecting restore to factory settings the laptop entered into a never ending cycle of 'analysing HDD' , attempting to fix HDD'.Left the laptop running for 12 hours and that was the only two messages I saw on the screen.No option to 'exit as problem encountered' so I had to power down my laptop to escape the 'loop'.Tech Support now wants me to try to format my HDD by taking my laptop to a local PC repair shop.Why am I being asked to do all the diagnosis work on a 7 month old PC? Surely it should be fixed under the manufacturers warranty?Could someone please explain what trying to format my HDD will show?Thanks

Update ..... My laptop would not boot up from the recovery disc as it turned out the hard drive required to be re-formatted to clear the fault. I was told by the PC Repair company that no matter what I tried I would not have been able to fix/clear the fault. Given it appears to have been a software corruption issue, after reading the Acer Warranty I have found out that I have to pay for the repair as the machine hardware remains in g.w.o. and the laptop is back in full working order once again. The PC Repair man did say however that if I had phoned him first instead of Acer Technical Support, I would not have needed to pay Acer for the set of Recovery discs as he would have provided a fresh installation of Win 8.1. at a fraction of the price! Lesson learned.

After upgrade to Yosemite my MacBook Air does not switch automaticly from wifi to ethernet. How to sloven problem?

After upgrade to Yosemite my MacBook Air does not switch automaticly from wifi to ethernet. How to sloven problem?

Have you tried changing the order in Network Preferences pane?
Open System Preferences/Networks/Click the gear symbol under the service list. Select set service order then drag. If your wifi is above the ethernet move the ethernet to the top. Click ok. Click apply (bottom left) and test.
Hope this helps
PJRS

2005 mac mini on OSX leopard will not boot up from firewire disk

I have an old mac mini that my son still uses and the super dirve does not work any more. But now the main hard disk needs to some attention from Disk Utility. So I need to boot up from the Leopard install DVD. But of course the DVD dirve does not work so how to do this? I have tried to create a bootable disk by restoring the install DVD to a partition on a firewire drive and this is seen as a bootable drive by my 2008 iMac, but not by the Mac Mini. So is it possible to boot up rom a irewire drive? USB doesn't work either

Which Tiger Install DVD do you have...?
1. I think that, that model originally came with 10.4.10 and so you will need either the original 10.4.10 install disc or a later retail (Leopard or Snow Leopard) upgrade DVD.
2. In addition, a new (HDD, Hybrid Drive or SSD) must first be Partitioned GUID Partition Table and Formatted Mac OS Extended (Journaled) before OS X can be installed.

I want to wipe iBook of it's content, but it will not boot up from DVD

Can someone tell me how I clear off the content of iBook and install the basic set of the applications? I have the original OS 9 disks but they will not boot up with these. I have gradually upgraded the OS so I don't have disks to match 10.4.11.
I want to give this away, as I bought new MacBook Pro recently and I have all of the files on the new computer, (and on another hard drive).
Thank you for any help from out there.

No problem; I usually answer good questions already solved. (It's for the search engine.) Here's how to wipe a corporate or government ATA hard drive.
Should you be concerned about spies, industrial and foreign, or even you own personal information, there is a standard method of erasing ATA disks that contain government classified information. Most ATA disks have it built in (and is a concern when purchasing computers for classified research). It's extreme, but sometimes necessary: information otherwise remains stored on 'bad' blocks, &c.
At one time, only the DOS program HDDerase activated the secure erase in ROM. For Mac users, the Linux program 'hdparm' (which has other uses) will do this from a Live Linux distribution on CD (unless you can boot a USB Flash Drive).'Darwin' might have it.
How to Nuke an ATA Hard Drive
http://ata.wiki.kernel.org/index.php/ATASecureErase
Note that, if you stop the process part way though, the disk may not be usable again (except to spies). Also, nothing is guaranteed.
If Darwin doesn't have it, or if it doesn't work, LiveCD distributions, such as Mint, Berry, & those of major distributions can be found here:
Linux Release Watch
http://distrowatch.com/

2013 new Mac Pro will not boot up from and external hard drive

New 2013 MAC PRO running Yosemite will not not see a bootable external hard drive when starting up using option key? Same External hard drive will boot up on 2013 Mac Book Pro running Yosemite.

Reading between tea leaves sometimes leaves some things to imagination.
You used SuperDuper latest version that was recently upgraded for Yosemite on a laptop running 10.10 (or even 10.9.3+) that is in a X-brand USB3 drive enclosure, not bus powered btw, moved it to the nMP and plugged it into a direct port, not going through a hub (monitors have hubs of course and there is only one real bus+controller on the nMP that ALL USB3 travels through.
Thunderbolt and self-powered would be nice but they cost a bit more.
I have read where Carbon Copy Cloner (now v 4.x) worked where others failed. I use to use both but have used CCC since its inception and use back in 10.2.2 forward along with SD! for a few years based on comments here.
Drivers missing? someone compared system extensions and found the ones needed for say the nMP are not there? how about running a 10.10.1 combo update and see if that changes - we USE to be able to apply updates to a system that we were not booted from, very handy (could update a sparse disk image of a system that way, one created with CCC).
WD Passports seem popular with laptop users, but they come here to this forum complaining that it doesn't work, disappears off the bus (spins down goes to sleep, acts like a green drive acts).

Mini will not boot disks from combo drive

Mini was having "issues." Thought I would do a clean install to correct all problems. When I insert OSX install disk and hold "C" key the computer tries to boot from the disk. The grey screen and apple logo apear. But instead of then going to the little spinning grey bars and booting to the disk, the grey apple shifts to the right and a some trash appears to the right of the logo, the computer freezes.
I have run the computer in terminal mode and run disks on the optical drive just fine.
It simply will not boot off of a disk in the optical drive.
HELP!
12 Powerbook G4, iMac G4 Flat Panel Mac OS X (10.3.7)

Try booting into safemode by holding down shift key. Sometimes it does take up to 5 minutes to boot into safemode but sometimes your atleast able to uses your computer as a temporary fix. If you can't boot into safemode it sound's like your hard drive has failed, in that case you would need to contact apple for a repair.

MBP 15" 10.6 does not boot up from Installation disc, why??????

Good day,
my question is simple, so please let the answer be simple:
I have done partition on my MBP today, in order to give me more redundancy in case of a Hard drive failure. I witnessed one yesterday on a brand spanking Imac--> not pretty--> the white screen of death!! I thought I´d better cover myself and I split my HD in two--> no probs.
Anyways, I decided to try to boot from my original installation disc--> 10.5.7, Leopard.
I booted while pressing "C", or holding "Option"……and always ended up with the same thing:
It just takes me to a language selection screen, I selected my language, and then it takes me to the software installation--> but I don´t want that--> I just want to reboot from my disc--> as a general test. (Just in case of that dreaded white screen, one day!!)
So, I went to to "Stop installation" in the menu above, and I chose "Reboot" and then I chose my installation disc--> and again and again, it just takes me back to the language screen etc etc etc!!
It´s like a Merry go Round………….
What am I missing??
My Snow Leopard installation disc does exactly the same, by the way…………..
Cheers,
MXP 150 Patriot

"perhaps I didn´t explain myself properly:
I would like to boot up from my installation disc, in other words, being able to log in and see my Desktop etc.
All I get from my disc is an installation menu (after the language selection) and if I try to boot up from there (to my desktop / background etc) by selecting "stop installation--> start up disc".........it goes back to the language selection and the software installation........just where I was 3 minutes ago!
What am I doing wrong?
My friend booted up the other day from his FireWire external hard drive and he got everything, SO quick! His personal desktop, everything!
Hopefully you can tell me what I´m missing........."
You're missing the point. When you boot from your installation disk it's to install the OS and/or repair the disk and check the hardware, etc.. Your friend has a bootable external drive. he used the OS Installation disk to create that.

Payment Terms on PO Header is not coming automatically from vendor master

Hi Experts,
I have two plants maintained as vendors in my system. Both have payment terms maintained in the Vendor master (Purchasing as well as Payment Transaction view) but when I create POs (all with the same document type), for one of the vendors, payment terms is being populated automatically on PO header whereas for the other vendor, it does not pupulate automatically.
I am wondering if there is any other setting controlling this payment term apart from the Vendor master Payment Term.
Please guide.
Thanks.

These plants are under different companty codes. We have custom document type ZNB for the PO. Do I need to check something in Purchasing Info Record or if any other thing setting controlling it.
Both the vendor masters have the payment terms maintained exactly the same. But, still I am facing the issue.
Thanks.

After installing 10.6.8 will not boot even from 10.6 disk HELP

Will only start in safe mode, Safari crashes so no help there to get back to 10.6.7 and will not boot from my 10.6 SL disk. HELP! Can't find the orignal disks so I am in a bad way...

Call AppleCare and request replacement discs. You can also Zap the PRAM and Reset the SMC and see if those will fix things up. You updated to 10.6.8 w/o having a bootable backup/clone or Time Machine backup? Bad move, that.

MSI P6N SLI V2 does not boot up from cd/dvd and few other problems

HI
I just bought a computer P6N SLI V2 + E6750. It has following problem. It does not boot from cd.
I have Sata HD. CD/DVD is installed to IDE as a master.
I have done settings in bios so that First boot is cd/dvd and second is sata HD. Anyhow it still goes to the hd and stars windows.
I was only able to boot up from cd when I disabled hd from boot sequency. Meaning I left only cd/dvd there.
Hopefully you pro's can help me.
Then there is another problem. Windows is telling me that it found new pci device. I do not know what device. I have only Graphig card (geforce 8800 gts) installed into pci-E. Drivers and software are also installed, I assume proberly. How to find out what windows thinks it found.
Third problem is onboard soundcard. I cannot get any sound out from the machine. I have downloaded driver from realtek, but still no sound.
Unfortunatelly I do not have original software for motherboard. Only the latest from MSI website.
Hopefully someone can help me.
thanks.

About bootup, i dont know yet.
To find out what windows found, look in devicemanager.
To go there go to controlpanel, system then choose devicemanager.
There you can see what's installed.
Last, your soundcards needs to be enabled in bios, under integrated peripherals there should be a line with "onboard sound", enable this and sound should work, unless its broken.

Not booting automatically from main HD

Similar Messages

Maybe you are looking for