Not breaking up HDV files
when I import an HDV tape, final cut breaks into files every time there is a start/stop recording on the tape. Is it possible to have a unique file instead ?
Open up the digital manual from your FCP Help menu titled " Working with High Definition and Broadcast Formats".
Search for "Capturing Footage with Start/Stop Indicators".
good luck,
x
Similar Messages
-
Ksld not breaking into source file
Hi guys,
I installed ksld and started debugging my driver using a tip connection... all works fine.. i inserted a breakpoint on one of my functions in the driver.. and in the tip console once i have reached the breakpoint.. i use ::remote to enter remote mode and start the ksld with all those options on the host and it get connected to the ksld agent.. but the host is not able to show the source code of my driver... ie it always breaks into the asm dump of the driver code.. how do i switch to source display.. but at the same time i am able to edit the source file and all.. ie by using edit command.. but no idea why the asm code is dumped while a break point is reached..
any idea how we can switch to source level code for debugging..
thanks allThe simple answer here is that machine specific files do not need to be checked in. This includes .PSS and .CPD files. The .HHP and .XPJ files are not machine specific, they are project specific and therefore must be checked in. The confusion over the HHP file may come down to whether CHM output is being produced. If you are not, you could safely say that this file need not be source controlled. However it doesn't cost anything to include it under source control so why make life more difficult by excluding it.
The RoboColum(n)
@robocolumn
Colum McAndrew -
How can I get GV and HDV files imported to Premier Elements 13. I know now that they are not supported. But does it exist ways to get them. I use camera HDR-HS7E?
skjeggi
What is this HDR-HS7E - a miniDV camcorder that lets you do DV and HDV capture firewire?
True, the DV and HDV capture firewire into the Premiere Elements 13 Capture window is gone. But, have you
looked at the workaround suggested by PRE_help in this forum. The workaround is found in the following
Adobe document....
http://helpx.adobe.com/premiere-elements/kb/removed-features-formats-elements.html
When your schedule permits, please let us know if that worked for you.
Thank you.
ATR -
After importing HDV files, wait for conforming, and drop the files to sequence, on some files there is no audio at all or partial audio.
All files played OK in any mediaplayer.
I have no such problems in CS5 or 5.5 using the same files in the same project and sequence type. HDV 1080i/25
I reinstall PR CS6 and I delete all ".cfa" and ".pek" files, but no success.All right so what I just discover so far in order to resolve this non sense bug thing, I've exported the faulted sequence in EDL, track by track.
On the original sequence, I had a Prores 422 video clip name "Clip 497" that was manually sync with an audio file call "Audio 10".
At another timecode in the original timeline, I had a h264 clip name "MVI_0050" that was synced with an audio file call "Tascam_0455".
I said that when I select only an audio file in the timeline and I make reveal in the project, it links me to the correct audio file in the bin but when I make match frame or reveal in the finder, it links the audio to a video file. The
Well the EDL just confirmed that, in the timeline created by the EDL, I have to relink manually all the files (wich is a pain in...) and my mysterious audio file "Audio 10" appears with the name "MVI_0050", I can still link it to the original "Audio 10" but I don't understand HOW an audio get to be linked to a video file......
The audio file coming from the Tascam still have their original names in the timeline.
Very weird and not very cool.
Oh and guess what, after closing Premiere and re open it, my sequence coming from the EDL where I spent 1 hours to manually relink the media....does not have sound anymore....................... -
Look I had save a copy of my bookmarks on my external hard drive. I had used the file before to restore my bookmarks in the past with no problem. Now it says its not an html doc file. Or when I had to hit the reset button all my old firefox data was saved to my computers desk top in a folder how can I use the bookmark file in that folder. I hope there is a way.
Make sure that the backup file with the bookmarks has the correct file extension:
* .html for a HTML backup
* .json for a JSON backup
You can check the type via the right-click context menu of that file and open the Properties.<br />
If you are not sure about the file type then you can open the file in Firefox via "File > Open File"<br />
A JSON backup will show as one long text line without line breaks and a HTML backup as a web page with clickable links.<br />
A JSON backup starts with: <b><nowiki>{"title":"","id":1,"dateAdded":</nowiki></b>
An HTML backup starts with: <b><nowiki><!DOCTYPE NETSCAPE-Bookmark-file-1></nowiki></b> -
How can I import HDV-Files from a CF-Card to Final cut Pro 5.1.4
How can I import HDV-Files from a CF-Card (recorded with the Sony HVR Z 7E) to Final cut Pro Version 5.1.4 – is this possible at all?
I managed to import the files to Premiere, but it was just a test. I am working at a very huge documentary project with Final cut Pro Version 5.1.4 thats why I would prefere not to change the program or the version.
Simply exporting from Premiere back to final cut is also very complicated.
Thanks for any ideas.First, copy the card to a hard drive connected to your fcp workstation. I always back up all card based media at least 2 or three times. All hard drive will eventually fail. It's a question of when, not if.
I'm not familiar with this particular camera, but examine the contents of the copied files and see if you can find any .mov files. You can try importing these directly into fcp.
If you don't, you can try something like clipwrap
http://www.divergentmedia.com/clipwrap
or
Magic Bullet Grinder
http://www.redgiantsoftware.com/
But, I'd really advise upgrading to at least fcp6 or ideally fcp7 if you can find a copy. HDV is a problematic format. Although you can certainly work with it and it's a fcp approved format, converting your media to prores would make your life much easier. -
Prevent Occurence of list header and page breaks in spool file of ALV Grid
Prevent Occurence of list header and page breaks in spool file of ALV Grid Display.
When we run the ALV in background and create spool request then:
Spool file output is coming like this.
Column1 Column2 Column3 Column4
data data data data
data data data data
data data data data
Column1 Column2 Column3 Column4
data data data data
data data data data
data data data data
But the required is like this
Column1 Column2 Column3 Column4
data data data data
data data data data
data data data data
data data data data
data data data data
data data data data
Please suggest a posible answerHello all,
if you have not yet solved this on your own, here is my solution: use a format type that has 60000 lines per page for your spool output device.
It all depends on the format type that was used for creating the spool output.
By default (in our system), we have 65 lines per page. And after each page the column headings of the ALV will appear.
What i did:
create a new format type via transaction SPAD->full administration->device types->format types (copy an existing one)
change"Number of Rows" to 60000 or something applicable
edit the device type of your output device (e.g. LOCL) to contain the newly created format type (via SPAD; Button "Formats" in device type maintenance).
That's it! Be sure to use this format type for your output device in the "Background Print Parameters" window (-> Button "Properties").
Regards
Daniel Klein
All other parameters you discussed before didn't do it. All ALV-Settings will be overwritten by the output device settings and its print properties. -
Story does not correctly export fdx file with scene numbers? Bug needs to be fixed.
Story does not correctly export fdx file with scene numbers? Bug needs to be fixed.
Okay, Even if i remove the scene numbers from Story and export the file to Final Draft 8. The format in incorrect. The "transitions" ex. CUT TO: are not in the correct allignment. Also there are numbers on each of the dialogues
Pretty much alot of the formatting is not the same. Spaces that break dialouge and action which are there in Story, are not converted over to Final Draft.
Please fix this as soon as possible.
thanks,
Rohit -
Opening FCP captured HDV file in windows
Hello. I'm trying to take a HDV file I captured in FCP and open it in either Adobe Premiere 1.5.1 or TMPGenc for encoding into VC-1/WMV HD AP (I'd like to edit it in Adobe Premiere), and then put it through say...Scenarist.
I have not been able to open it in QT for Windows at all no matter what. I want to keep it as an HDV file and not reencode due to file space issues. I have intalled the HDV plugin for Premiere 1.5.1 however it doesn't open in anything at all, indicating it's not a Adobe issue.
What i suspect is that it's not opening because it's in a proprietary QT wrapper that Apple will not let anyone access to build a decoder around. Once captured on a mac it's obviously not a .avi format file regardless of codec used.
If this is not possible a simple 'no it's not possible' would easily suffice. I'm off to get some sleep. TIA.Probably best practice to start and finish the project on the same platform.
Most of the HDV video codecs used in FCP do not have Windows counterparts. Soon FCP Suite will be updated to version 6 (maybe NAB convention). -
FCP captured HDV file won't open in windows
Hello. I'm trying to take a HDV file I captured in FCP and open it in either Adobe Premiere 1.5.1 or TMPGenc for encoding into VC-1/WMV HD AP (I'd like to edit it in Adobe Premiere), and then put it through say...Scenarist.
I have not been able to open it in QT for Windows at all no matter what. I want to keep it as an HDV file and not reencode due to file space issues. I have intalled the HDV plugin for Premiere 1.5.1 however it doesn't open in anything at all, indicating it's not a Adobe issue.
What i suspect is that it's not opening because it's in a proprietary QT wrapper that Apple will not let anyone access to build a decoder around. Once captured on a mac it's obviously not a .avi format file regardless of codec used.
If this is not possible a simple 'no it's not possible' would easily suffice. I'm off to get some sleep. TIA.I doubt it's anything so sinister as "a proprietary QT wrapper that Apple will not let anyone access to build a decoder around".
More likely is that the codec is only for Pro applications and there's not been a port to Windows because Apple doesn't make any Windows Pro Apps. If you want to use Premier and it supports HDV, why not capture with Premier?
Patrick -
Unzip issue: Could not delete the zip file after unzip it
I have issue with the following code, the purpose is to unzip first then delete the zip file. But I could not delete the zip file. When I put a break point before my delete() call, I manually delete it and get the file is used by another process. Please help. Here is my code;
try{
File primeZip = new File(dir, fileName);
ZipInputStream zipStream = new ZipInputStream(new FileInputStream(primeZip));
ZipFile zf = new ZipFile(primeZip);
OutputStream out = null;
for (Enumeration em = zf.entries(); em.hasMoreElements();){
String fileName = em.nextElement().toString();
out = new FileOutputStream(fileName );
byte[] buf = new byte[16384];
int len;
while ((len = zipStream.read(buf)) > 0) {
out.write(buf, 0, len);
out.flush();
out.close();
out.flush();
out.close();
zipStream.close();
primeZip.delete();
}catch(FileNotFoundException e){
}catch(IOException e){
}I put close() for ZipFile object which is zf.close() befoer I delete the zip file resolve this issue.
Thanks. -
No thumbnails in PRE12 for m2t hdv files
Hi folks
I have similar issue as some others and did not reslolve it with information from other threads. HDV from Canon HV40 camera either directly read by PRE or prepared by HDVsplit can be played and used in timeline or project but in Organizer thumbnails are without pictures. Thumbnails in project data window are OK but too big to be used. In PRE3 thumbnails could be set to small and therefore they were managable but this option is missing in PRE11 and 12.
W7, recent freshly installed Quicktime (7.7.4). Uninstalled Haali media splitter, Uninstalled ffdshow. Uninstalled VLC player.
When I made m2t file from footage with PRE12 it worked on Organizer correctly, but when the file is from camera, even donloaded with PRE, it does not work.
I do not want reinstall Windows as a last resort as other programs like Powerdirector worked (it is gone half a year ago because I prefer PRE for some neat features but without resolving this issue PRE is unworkable).
Thanks for hints.
Petrp.pik
Premiere Elements Windows Project Assets
I am not sure if your target question is really about thumbnails in Project Assets or not. Or is the target rather an aside comment to your real problem display of MPEG2.mpg or MPEG2.m2t in thumbnails representing your HDV files in the Elements Organizer 12?
Assuming for the moment that your target is the size of the thumbnails in the Premiere Elements 12 Projects Assets.
a. Project Assets has two different views, List and Grid (block looking). When you are in the List view, you can right click on a blank space in that area to get a pop up which includes an option for thumbnail size (Off, Small, Medium, or Large).
b. Also, did you know that you can organize your Project Assets contents into folders?
Elements Organizer 12
a. Please correct me if I am wrong, but the issue (no first frame of video in Elements Organizer 12 thumbnail) resides only with HDV from your camera.
In the case of HDV data capture firewire into Premiere Elements Capture Windows (MPEG2.mpg on the Timeline)
or
In the case of HDV data capture firewire into HDVSplit, followed by import of the MPEG2.m2t files into a Premiere Elements HDV project (MPEG2.m2t on the Timeline).
b. Yet you say that, if you export a Timeline content to MPEG2.m2t saved to the computer hard drive, there is no problem in the representation of it (first frame view et al) in Elements Organizer 12.
I do not have a sample file from your Canon camera. And, when I export my Premiere Elements 12 Timeline to MPEG2.m2t and bring that saved file to the Elements Organizer 12 (File Menu/Photos and Videos/fro...), the Elements Organizer 12 crashes specific to that file. On the other hand, I can import that same MPEG2.m2t into a Premiere Elements 12 project without problem. And, it automatically is placed in the Elements Organizer 12 (thumbnail with gray content). If I right click that thumbnail and select Update Thumbnail, the Elements Organizer 12 crashes.
More work needs to be done to define this issue further.
Please review.
Thanks.
ATR -
How to insert Page Break in SPOOL file
How to insert Page Break in SPOOL file.
How to insert Page Break in SPOOL file.
SET NEWP[AGE] {1|n|NONE}
SET NEWPAGE is not supported in iSQL*Plus
Sets the number of blank lines to be printed from the top of each page to the top
title. A value of zero places a formfeed at the beginning of each page (including
the first page) and clears the screen on most terminals. If you set NEWPAGE to
NONE, SQL*Plus does not print a blank line or formfeed between the report pages.
http://www.lc.leidenuniv.nl/awcourse/oracle/server.920/a90842/ch13.htm
SQL> SET PAGESIZE 5
SQL> SET NEWPAGE 0 --a form feed between your pages
SQL> SPOOL C:\output.doc
SQL> SELECT * FROM emp;
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7369 SMITH CLERK 7902 17-DEC-80 800 0 20
7499 ALLEN SALESMAN 7698 20-FEB-81 1600 300 30
7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30
7698 BLAKE MANAGER 7839 01-MAY-81 2850 0 30
7782 CLARK MANAGER 7839 09-JUN-81 2450 0 10
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7788 SCOTT ANALYST 7566 09-DEC-82 3000 0 20
7839 KING PRESIDENT 17-NOV-81 5000 0 10
7844 TURNER SALESMAN 7698 08-SEP-81 1500 0 30
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7876 ADAMS CLERK 7788 12-JAN-83 1100 0 20
7900 JAMES CLERK 7698 03-DEC-81 950 0 30
7902 FORD ANALYST 7566 03-DEC-81 3000 0 20
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
7934 MILLER CLERK 7782 23-JAN-82 1300 0 10
13 rows selected.
SQL> SPOOL OFFKhurram -
User Inputs Not Stored In External File
I'm using the following code to store marks
if (courseCode.compareToIgnoreCase(cCodeTerminate) != 0)
System.out.print("Enter your exam marks for " + courseCode + ": ");
examMarks = Integer.parseInt(in.readLine());
//Loop to check if marks are within 0 and 100
while ((examMarks < 0) || (examMarks > 100))
if ((examMarks < 0) || (examMarks> 100))
System.out.println("Your exam marks cannot be less than 0 or more than 100.");
System.out.print("Enter your exam marks for " + courseCode + ": ");
examMarks = Integer.parseInt(in.readLine());
else
examMarks = Integer.parseInt(in.readLine());
toFile.print(examMarks);
toFile.print("\t");
}//End of loopHowever, the marks are not stored in the file. Is there something wrong with my coding?
The courseCode is stored only.Also how do you plan to break out of this loop?
If the examMarks are less than zero or more than a
hundred you print out a error message and ask for the
marks again, and if they are between zero and a
hundred you print the results... but then the loop
keeps repeating until the marks go below zero or over
a hundred.
Confusing... maybe you should post more of the code?Thanks for the question. I got it working.
The while loop was totally extra and I got so many of the same input (examMarks) in my file. -
Hi,
I'm new to pages and really haven't done anything like this before. I created a 4 page brochure document. The printer is telling me that I have to upload two seperate files-- a back page, pgs 1 and 4 and a front page, pgs 2-3. Is there anyway to break up my file this way?
Thanks so much!You haven't said what size but we assume U.S. letterhead, as a 4 page brochure, one sheet folded in half.
Use *Page Layout* mode and set up your brochure with the page in horizontal view in
+Menu > Page Setup.+
The size being the unfolded sheet size.
Pull out a guide from the side to the halfway mark for the folds and lay out the text boxes and images where you want them to appear on each half of the paper to form each final page.
Create your brochure like this:
+Page 4 (back) | Page 1 (front)+ side by side on 1st page of Pages
+Page 2 (inside) | Page 3 (inside)+ side by side on 2nd page of Pages
Make a dummy of how it will look by folding a piece of paper in half and sketching on it where you want everything. Then unfold it and lay it out the same way.
Be warned there are problems with Pages not having crop marks to mark the corners for trimming and also there are problems with resolution and color management when you create the pdf for final print.
What color are you using in the brochure and how is it being printed, digital or commercial offset?
Is the Printer aware what software you are using and happy with the possible results?
Peter
Maybe you are looking for
-
Allow a user to create/change records in 2008 R2 DNS
Hi, We currently have a 2008 R2 domain with two AD servers running DNS. I want to grant permission to a regular user to be able to create/modify records on the DNS server for the primary domain (company.com). I have done some reading but everything k
-
Spaces getting truncated in 2D barcode
HI, I am facing an issue with 2D bar code output where variables with fixed legth are concatenated assigning offset without concatenation statement, the issues is if the length of variable is 24 , value is of 18 characters then the remaining 6 spaces
-
I am using file_oper to create an excel report. There are some decimal fields that are not being displayed properly. How do I format these fields so they are displayed properly? These are currency fields. ex: 12323.45 34.4 2534.674 10000.02
-
Datastore id and flat class mapping
Hi, I have - an abstract persistent class A with 2 concrete persistent subclasses A1 and A2. I'm using datastore identity and flat class mapping. - a class B that has a field fb with a one-many mapping to A1 objects (Hashset). - a class C that has a
-
Is anyone else having trouble with the new OS, I am unable to unlock the do not rotate app in settings? Also I hate the new OS!