Not burning properly

Hello, can anyone help me please? I have checked that my movies play before I burn them. Everything is good. When I have burned the DVD, the playback has not sound on two of the movies. There is a quick 1 seconds worth of the audio and then its gone. Is it iDVD or my drive?
Any thoughts would be much appreciated.
Thanks

Have you recently recorded any DVD's successfully? If so and the audio was as expected then it's not likely a hardware issue. Might be a setting/s you overlooked.
Tell us more about this clip with lost audio. Is it 12 bit or 16 bit? Have you tried extracting the audio from this clip to see if that helps or not? Sometimes extracting the audio and then sharing the iMovie back out to Minidv helps (in that you can then bring it back into iMovie =>iDvd and it will work as expected).
Try it.

Similar Messages

Dvd not burning properly, not recognized by DVD Player

I have not burned video DVD's for several months until this week when I find that disks burned from disk images created by IDVD no longer burn properly. They are not recognized by Apple DVD player or on two different commercial players that I have. The disk images can be played with Apple DVD player, but once burned to disk, I get a message Disk not Supported. I have tried burning disks from 3 reputable brands with the same results. I just updated to OS X 10.8.5. Anyone have any suggestions?

Another thing to check is your bitRates and whether you encoded the audio to A.Pack/Dolby. I have often seen machines play once or twice then start having playback issues or not play. It can be related to the encode rates (and it may not behave across different machines the same way, in other words it will continue to play fine on some players and not another)

CDs not burning properly

Frequently, when I burn a CD, some of the tracks will have a very scratchy sound and sometimes will even skip. This usually happens on tracks near the end of the disc. I have observed this to happen with both CD-RWs and CD-Rs, and it happened on my old Windows 2000 system as well as my new Windows XP system.
If anyone knows what I can do to fix this, I would appreciate it.
Custom built Windows XP

Hi
Four thoughts
• Brand and type of DVD/CD Media
• Burn Speed ?
• Ever used a Cleaning DVD ?
• Free space on Main Start-Up Hard Disk ?
Brand and type of DVD/CD Media: MATTERS
- Memorex, NoName and other Cheap brands - most probably works for other things BUT NOT FOR VIDEO.
I only use Verbatim
- DVD-RW - usually do not work OK but with various kinds of problems. DVD+R is a more modern sort and use to give problems on older DVD-players
I only use DVD-R
Burn Speed (in iDVD or alike): Matters
• Best or Max - is not best
I set it down to x2 or x4 Max
Ever used a Cleaning DVD ?
I use one WITHOUT Liquid but with brushes from time to time
Free space on Main Start-Up Hard Disk ?
- Due to that Mac OS X - is UNIX - it behaves likewise. It needs lot's of space on Boot / Start-Up Hard Disk for it's and the applications temp files.
I never go less than 25GB free space - If HD-Video material is used then 4-5 times more is a good thing.
Yours Bengt W

Discs not burning properly

Hi
Just wondering if anyone can help me out.. recently when I try to burn a disc (dvd) with Jpegs and Tiffs, the disc appears to burn ok however when I try to use it in another computer it only comes up as the shortcuts that have been burned... the alias'... Not sure why this is happening, very annoying though.. and wondering if there is some setting I may need to change... I have just been using finder and dragging or copying and pasting the files to the disc and hitting burn and naming disc etc... If anyone could help that would be great..
Thanks!

Maybe you should create a burn folder and drag the items to it before beginning the burn. Just a guess ~

DVD's not burning properly

Creating projects in iDVD5 I am getting projects which seem to be missing data enough to cause jittering or stopage of the movie. Any Ideas???

Hi Joe,
Any Ideas???
not yet...put in some more info.
where is the movie coming from? How long? where is it stuttering/stopping? Where are you playing it? Did you create a disc image and did that play fine?
What type of DVD did you use? Burn speed?
these are things that could bring us closer to the solution
mish

ITunes crashing and not burning properly

Hi. Having issues since latest iTunes upgrade -- any help appreciated. iTunes 7.6.2 (9) and Quicktime 7.5.0 (861). OS 10.4.11.
Since last Software Update, iTunes crashes repeatedly. Have run disk utility and trashed preferences -- didn't help. Now I've noticed it's cutting off the first few seconds of the first song of CDs it's burning.
Never had either of these problems before.
Help?
Thanks.

Problem went away with various updates.

After installing any version of itunes. Told failed to install properly and could not burn or import music from Cd's. Also will not allow eithre one of my 2 ipods to sync with it as well.

After installing any version of itunes. Told failed to install properly and could not burn or import music from Cd's. Also will not allow eithre one of my 2 ipods to sync with it as well.

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. (Use your Ctrl-V keyboard shortcut to paste.)

ITunes is not installed properly. If you wish to import or burn CDs you need to reinstall iTunes .

I have installed iTunes on my new Windows 8 laptop and I get the "iTunes is not installed properly. If you wish to Import or burn CDs you need to reinstall iTunes."
I have worked with Dell technicians and we have re-installed iTunes numerous times. We modified the Registry by adding the Upper Filters key and we removed the CD player in Device Manager and allowed it to be automatically reinstalled by the computer. All of this failed.
Please help!

Hello ,
Thanks for using Apple Support Communities.
I understand you've already uninstalled iTunes previously to troubleshoot this issue but make sure to follow the steps in the following article to remove iTunes and all of its components in the specific order listed.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
If the issue persists, continue troubleshooting with the following article.
iTunes for Windows: Troubleshooting CD issues caused by device filters
http://support.apple.com/kb/TS2372
Take care,
Alex H.

I have a problem with my computer recognizing my new iphone when i uninstall itunes and reinstall it does not download properly and bonjour will not load any ideas of what to do

I have a dell lap top with windows 7 that won't recognize my iphone 5c. The driver's will not install with out a problem, I talked to apple support to try to fix this problem, I unistalled itunes and reinstalled it, now itunes did not download properly, bonjour does not load and i can not burn cds, I have uninstalled and reinstalled twice with the same problem. If anyone can point me in the right direction that would be great

You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money..

Windows 7 does not recognize cd/dvd drive. Will not burn a disc

           In November 2013, I bought a refurbished hp Compaq 7900 convertible minitower, Product No. NJ3226UC#ABA, 32-bit. Windows 7 and WMP 12 were installed by the company that refurbished it.   WMP's  play, rip, burn, sync worked perfectly.
           I made the mistake of installing itunes. I purchased music and made a playlist from my library and itunes. I tried to burn the playlist with Memorex discs.  WMP burn would kick out the cd at 99% complete. I tried a different brand of disc and had the same problem. The message each time was 'Windows Media Player Encountered an error while burning. Verify that the burner is connected properly and that the disc is clean and not damaged.' I tried burning a disc using itunes burner but it didn't do anything.
           First, I removed every Apple application from my computer. Then I ran Microsoft CD/DVD trouble shooter. It didn't correct the problem and gave me the message "cannot locate CD/DVD burner". I ran trouble shooter in the Control Panel selected System Security's, Find and Fix. Then Selected Configure a Device . Results were 'Hardware may not be detected try to do what you wanted to do again' I tried 2-3 times. WMP would not burn.  Tried Apple for help and didn't want to reinstall itunes. I reinstalled Quick Time.   Followed Microsoft's 5-step resolutions:
          1. Used the troubleshooter in Control Panel.
         2. Ran CD/DVD Fixit trouble shooter.
          3. Manually fix corrupted registry.
         4. Update or reinstall driver.
          5.  Create a sub registry key.
I tried to burn after every step and got the same result.it burned to 99% and kicked out. I used system restore back to May 15, 2014 thaat was before installing iTunes. No burn.   Checked driver and response was that 'Driver is working. No problem was found'.    Today, ran Troubleshooter in ControI Panel and this was the messsage, 'Configuration Settings May Be Incorrect'. How do I correct this? Help! What next?

Hi,
You were given some very good advice on your other post. I ran into a very similar issue when I had installed iTunes and the end result was that I had to do a factory recovery back to a day one condition. Then I had to do a slow software installation process, checking every time I had installed a third party application. I got tripped up a couple of times but determined that I had to install iTunes before installing other CD/DVD media programs (Roxio,WMP and Cyberlink).
Do a fresh OS installation without the extra third party software and then install Imgburn. Then use Imgburn to determine the capabilities of your optical drive and match the media specifications those detected by Imgburn to the media type that you are using. Do not use cheap media as the firmware in your optical drive may not support it. I prefer to use Verbatim media. Now see if Imgburn will burn your optical media before attempting to install iTunes and other CD/DVD optical media programs.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Clip inspector in imovie not working properly - when I select a picture - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and in a clip the audio adjustment only shows a speaker? help

Clip inspector in imovie not working properly - when I select a picture (in project library) - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and when I select a movie clip and then click on audio adjustments the audio adjustment appears as a speaker icon and I don't know how to get to the various audio options? It was working fine one minute and then I seemed to lose the functionality. Also editing a photo in a photo or getting rid of ken burns effect etc does not seem to work. help

Can anyone shed any light on this as I am having the same problem? One minute it works fine, the next you get the error message above.
Many thanks.

Itunes not Installed Properly, Repaired and no luck.

Hi. I haven't been able to create a CD for about 2 years now. I searched through these forums and found other ways of Repairing the Itunes program and have had no luck. I've repaired through downloading Itunes again, when Menu pops up, I choose to Repair ( too afraid to uninstall, and lose data). That finishes and I re-open Itunes, and still receive the same message ( Itunes not installed properly, you cannot burn/import a CD). I saw on a post on this forum about repairing it through my Windows Control Program ( Add / Remove) - did that, thought it worked out but did not. Do I need to restart my computer for changes to occur ? I also ran the itunes Diagnostics and these are my results.
Also, I see that it states I'm not the Adminstrator..... I am ?
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Sony Corporation VGN-SR520G
iTunes 11.0.4.4
QuickTime 7.7.2
FairPlay 2.4.14
Apple Application Support 2.3.4
iPod Updater Library 10.0d2
CD Driver Not Available
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0037BDB8096213E8
Current user is not an administrator.
The current local date and time is 2013-08-06 15:49:16.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: bacbfef65266ce1f14880911ab02cf41
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {18D4A6E8-F45A-4F28-9AD0-F9C8D88563EA}
Description:    Bluetooth Device (Personal Area Network)
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Wed Dec 31 16:00:00 1969
Lease Expires:    Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name:    {0FDB6DF3-7F90-400A-88BB-35067E7A6DE7}
Description:    Intel(R) WiFi Link 5100 AGN
IP Address:    192.168.0.7
Subnet Mask:    255.255.255.0
Default Gateway:    192.168.0.1
DHCP Enabled:    Yes
DHCP Server:    192.168.0.1
Lease Obtained:    Tue Aug 06 15:37:23 2013
Lease Expires:    Tue Aug 06 16:37:23 2013
DNS Servers:    71.9.127.107
        68.190.192.35
        24.205.224.36
Adapter Name:    {9E496D44-0552-48DF-AF8E-708D23F5BA00}
Description:    Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Wed Dec 31 16:00:00 1969
Lease Expires:    Wed Dec 31 16:00:00 1969
DNS Servers:
Active Connection:    LAN Connection
Connected:    Yes
Online:        Yes
Using Modem:    No
Using LAN:    Yes
Using Proxy:    No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-08-06 15:48:50.
**** Device Connectivity Tests ****
iPodService 11.0.4.4 (x64) is currently running.
iTunesHelper 11.0.4.4 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
Ricoh 1394 OHCI Compliant Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPod touch (4th generation) running firmware version 6.1.3
Serial Number:
iPhone 5 (CDMA) running firmware version 6.1.4
Serial Number:
iPad 2 running firmware version 6.1.3
Serial Number:
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

Hello Craz4Sk8erGuy
If you uninstall iTunes, you will not lose any data if you uninstall iTunes, the iTunes database file will not be removed. Check out the article below on how to completely uninstall iTunes and its associating services. Also, I found an article for burning issues with Sony burners as well.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Burning disc in iTunes for Windows using a Sony CD-RW/DVD CRX830E model drive fails with 4280 error
http://support.apple.com/kb/ta38101
Thanks for using Apple Support Communities.
Regards,
-Norm G.

External Hard Drive not recognize after not ejecting properly

i have Macbook Pro 2011 8GB RAM, 1 TB Hard drive OSX Mavrick. i recently ejected my back up drive but it was not a properly ejected now when i plug in the computer it doesnt come up as hard drive. it shows up in the disk utlity but it doesnt open any one know how to solve this issue please its my backup drive and i dont want to loose m data
Thanks

1. press command + space (or click on your spotlight search button near the top right corner)
2. Search and Open Disk Utility
3. Plug in your external drive
4. Click on the drive in the left panel
5. Click the repair button near the bottom right of the window
6. Wait for the disk to be verified and repaired
7. Eject the external drive
8. Unplug and replug the drive back in and then see if it is then accessible.
9. If still not accessible repeat steps 2-4 then hit the mount button in the toolbar of the window. It will be in between the burn and the eject button.
Regards
Noahwhite2014

Will not burn photos to disc

iPhoto will not burn photos to a DVD disc(Maxell DVD+R).
iMac response is:
"The burn to the SuperDrive drive failed. The disc drive didn’t respond properly and can’t recover or retry."
These Maxell DVD's are probably 2+ years old. However, I was able to burn 2 disc early this morning. Could it be a heat problem with the SuperDrive?
Your Thoughts?

If you have burned 5 or 6 disc in a row then maybe heat could be a concern. I don't think so with just 2. Are you able to burn a disc, CD or DVD, from the Finder or is it just from iPhoto?
Run the Apple Hardware test as described here: OS X Mountain Lion: Use Apple Diagnostics or Apple Hardware Test
OT

IPhoto Slideshow images will not burn to DVD -- Green Screen

I'm trying to burn a slideshow I created in iPhoto '09 to a DVD using iDVD '09. The first few time I've done this, everything burns properly, including the DVD menu. When I select the "play" button to play the slideshow, the music that I originally entered plays correctly; however, the screen is completely green and none of the images appear.
Slideshow has 136 pictures and three songs from my iTunes library. The menu in iDVD has no music and only one pictures, using a previously loaded theme from the default options. I am burning the slideshow to 16:9 ratio, NTSC, best performance.
I have tried creating using the autoplay upon dvd insert option, which still did not work. Same green screen with slideshow music playing. I am currently trying to export the slideshow as quicktime movie then adding that to the project.
PLEASE help. Any ideas appreciated.

I did search apple's KB again but that's the only article I could find on Green Screen so I posted it to the forum for reference purposes only....
Sorry it failed to help. I'll ask around for other suggestions and if anything comes up I'll post back.
DRM is certainly a possibility as suggested above even though I've not seen it attached/related to an issue of this nature (lines yes, but rarely the entire screen).
Message was edited by: SDMacuser

Not burning properly

Similar Messages

Maybe you are looking for