Not capturing DM's

Hi,
I created a streams environment in a single database.
I have 3 schemas. Namely Schema1,Schema2,Schema3
Schema1 and Schema2 are having same structure....
schema1 and schema2 have 500 tables.
Schema3 has 100 tables but have same structure as schema1 and schema2.
i need to replicate 150 tables from schema1 to schema2
and 100 from schema2 to schema3
I created a streams environment betwwen schema2 to schema3
then schema1 to schema2.
As i importing data into schema1 the data is replicating in schema2. But it is not replicating schema3.
There are no error in logs.
When i insert any data in schema2 they are replicating in schema3.
Why this is happening.
Please help me in this issue.
Thanks,
Ray

This is a duplicate posting of the exact same question. Please do not do this if you want help.
No one should respond to this duplicate.

Similar Messages

Can not capture from Sony HDV 1080i (recording in 60i)

Hello
We are trying to capture from the above camera to a Mac Dual G5. We are using FinalCutPro 5.1.2. We are using a FireWire 400 cable to connect to the front of the computer (have also tryed back of Cinema Display). The footage was captured in HDV1080/60i, and we have tried the corresponding formats in Easy Setup (Basic, standard, Apple Intermediate).
The problem: we can control the camera from the Log and Capture windows, but when starting capture, no data is coming in, and the program therefor gives up after a few seconds (displaying a no data error message).
We have tried Batch and Now capture. We can log clips, and get the correct time code, but can not capture those clips due to the no data problem.

This is a good workaround for curing your camera recognition problem with FCP (if that's what it is):
First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
http://docs.info.apple.com/article.html?artnum=301852
Follow the instructions carefully and you should have things running in no time - it's quite safe but you must Trash the Receipts AND re-install QT from the link provided.
If the Camera / Deck isn't recognised by iMovie or System Profiler, try resetting the Firewire Bus . . . Turn off the Mac and disconnect the power and all Firewire cables. Leave it for 30 mins then connect back up.
Still not working? Try a different Firewire cable.
Failing all this, try resetting the PMU (Power Management Unit). The method varies from machine to machine, so visit the Apple site and search for it in support.
Don't use iMovie for capturing - it doesn't give you a timecode and that's very important.
Let us know how you get on!
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Multiprovider is not capturing some fields data

Hi Friends,
               I got a proble when iam working on multiprovider,where i have taken two cubes into that multiprovider,now the problem is when i execute a report on muliprovider some fields are not populating with data.
{{cube are :billing cube(data sources:2lis_11_vaitm&2lis_13_vditm)
              account receivable item data(0fi_ar_4)}}
                       As this is RRI sender query having both cubes information,when i execute report when ever report captures first cube report the second cube data is not capturing vice versa.
Thanks and Regards
Gunasekhar

Could be a problem on identification (setting on multiprovider).
Try to execute on transaction RSRT your query
execute + debug
on debug option set "Multiprovider explain"
and report the log in this post.

Excise Duty is not captured in MIRO

Dear,
When we posting a vendor invoice against purchase order , It is not capturing excise duty ,
In part 1 excise invoice date is 31.03.2014 with the GR posting date 15.04.2014 and In part 2 posting was done on 16.04.2014.
we are facing this problem due to different excise year upated in table J_1IEXCDTL and J_1IGRXREF.
Please give us solution.
Br,
Swapnil

hi,
have you checked J1ID all entry for that material is exist and also check PO invoice tab whether tax code exist for that material.
Regards,
mukesh

Excise is not captured in MIRO in Dealer Invoice

In dealer invoice , In PO, for Eg: Basic price : 1000 + vat 200, Total 1200 Rs.
I have changed excise duty values in MIGO . for Eg: Basic price : 900 + Excise 100, Total 1000 Rs.MRP Indicator activated
Excise is not captured in MIRO.
Regards.,
Lakshmanan.S

In case of dealer invoice you will have to change the Tax code in MIRO in your case to get the Excise calculated.
Other way is you take excise credit first with J1IEX clicking MRP indicator and properly takin excise credit, after that MIRO will automatically take excise in to accounts.

Excise Duty not capturing in invoice

Dear all,
All the configuration have been maintained for Excise duty, while doing PO the excise duty is capturing even doing MIGO and excise captured but during Invoice (MIRO) the excise is not capturing.
Regards,
Raziq

Hi Raziq,
When the Excise is Caputred at MIGO system post RE23A Part 1 entry, where as for RG23A Part II entry you need to execute J1IEX.
In this system will show the Excise Duty and it will post the below accounting Entry:
BED Dr
eCess Dr
HECess Dr
CENVAT Clearing Account Cr
Now when you wil do MIRO system will reverse the CENVAT Clearing Entry by creating three lines
Please let me know if you are following above approach or not.
Br,Vivek

BED is not capturing in the J1IIN

Dear Experts,
I have created commercial invoice ,in which i have entered only BED (Condition type JMAN) manually (Rest of the duties like Cess and Ecess will appear automatically)then i created excise invoice with the help of J1IIN, while creating excise invoice manually entered BED is not capturing and not generating accounting entry also for BED but the other duties (Cess Ecess) is capturing properly in the excise invoice and entries also generating.
i have check the other commercial document also, wherever we entered BED manually the same problem we are facing and if BED is coming automatically, where we are not facing the problem.
So please help me to resolve the issue urgently
Shibu

Sir,
,i have gone through the path as you suggested, where JMAN is not maintained. the thing is that we are not able to maintain JMAN in Tax Defualt information because we are entering occasionally (JMAN ) manual excise duty. mostly the excise duty is coming from preceding document. if i change the JEXP and maintain JMAN in Tax Defualt Information, i hope i will face problem if BED is coming from preceding document automatically, in that case i have to change again the JEXP instead of JMAN.
Please give me help for resolving the isse
Shibu Chandran

Date type is not captured in Visual composer 7.0 using SQL server as DB

Date type is not captured in Visual composer 7.0 when using SQL server as DB, and field type is "SmallDateTime" in DB.

Create new Text tab in fields of Table & select Type as Date in VC or use DSRT date function

Material Fright Group related Condition record is not captured in billing

Dear all,
As i am creating Credit Memo with respect to Credit memo Request (Sales Order) and my freight condition record is maintained in Material Freight Group level. This field is there in Sales Order but when i am creating Credit memo it is not captured and also i am unable to find Material Freight Group field in Billing Document.
Please help urgently.
Regards,
Chirag Pedhadiya.

Hi...
But why we have to write this code in User Exit. Is this Standard SAP Problem ??
I just wonder that in Delivery Related Billing Document it is finding Material Freight Group related Condition record in Billing means in Billing Pricing it is getting value in Material Freight Group filed and set this condition record value, though there is no any field like MFRGR (Material Freight group) in Billing Tables VBRK or VBRP.
So for Order related Billing Document only why this filed is not getting any value in Pricing ??
Thnaks,
Chirag Pedhadiya.

FCE not capturing footage

I am using FCE 3.5.1 on a G5 Dual Processor using OX 10.4.10. I can not capture video to FCE from my two Sony DV cameras. FX1 and TRV 22. This just started after years of no problems. I have pulled preferences and reinstalled FCE several times. But the problem continues.
I can operate the camera, but it acts as though there is no time code on the tape. The time code on the tape is fine as I have captured this footage on other systems.

G'Day Mate
Thanks for the reply. I have tried the Quicktime Receipts removal, but did not solve the problem. Only had one Quicktime pkg listed. It did have numbers. While I was there I pulled the FCE HS pkgs as well with numbers.
FCE HD does recogizine the cameras and will control it from Capture, but does not capture footage correctly. With clips it pays no attention to cues in and out. In "now" it will freeze the picture while continuing to record the sound.

Can not capture

Upgraded Premiere Pro, Have bought the new mac computer. Using a Canon DV camera, and can not capture any footage from my DV tapes. Have tried everything!!! Premiere just say Capture Device Offline,. Read through many threads and have got no idea how to fix. Help me Please... I just bought this MAC and now its useless if i can't use it to edit
Even tried all the steps on the web bpage, i do not have a firewire, the USB port i use to plug in are through an AV device (yellow, red, white cables) that then filter through top a USB port cable and plugged into the back of my computer.

I mean it's the new Mac do it's just a thin screen, I would rather leave it and have an external cord.
Why has Mac not allowed for this, they are suppose to be the best & up to date with video software?
Unfortunately, Apple knows best, and will dictate that to its loyal users. They must adapt to the "party line," or move to a PC. That is just the way they think.
Sorry for the bad news,
Hunt

Captivate 7 is not capturing system audio, and the software has a broken link

The Problem:
Captivate 7 is not capturing system audio. When I start a screen recording, the line with "System Audio" and its checkbox are eternally grayed out. Next to the grayed out words is a link that says, "Why is this disabled?"
The lnik goes to: http://www.adobe.com/go/cpaudio
Which is not a valid link, so Adobe's site redirects me to blogs.adoble.com/captivate which is ZERO help. Both browsing and the search bar bring no answers.
The Device:
Apple Macbook Air, Mid 2013, running OSX 10.9.2.
What I've done already:
Obvsiously I have set Captivate 7's preferences to capture system audio, and have set System Settings -> Security and Privacy -> Privacy -> Accessibility to allow Captivate to control my computer.
I have also tried clicking the Mic icon, Selecting Source with the System Audio icon and that doesn't record system audio either. It acts like it is recording system audio, but when I stop recording I get a popup that says, "Cannot record system audio. Ensure that you are playing audio on your computer [Okay]"

It's a wierd one.
One thing to try, and this fixes a lot of things, trash your preferences.
http://www.digitalrebellion.com/prefman/
DM

Variable not Capturing in i_t_var_range

Hi Frds,
I have created new customer exit variable for 0FISCPER for calculating fiscal period. But the created new variable is not capturing in the Customer exit - EXIT_SAPLRRS0_001 in import - I_T_VAR_RANGE. Can anyone tell how to solve the problem.
Thanks
Pari

Hi,
First thing is to how you have defined your variable such as
Customer exit or
Replacement path or
Manual input etc..
If you want your variable filled through the exit select Customer Exit, then you have to look at the variable options such as Single value or range. According to your definition you have code as you defined such as wa_range-opt = 'BT' or 'EQ'.
Next..
In CMOD -> your project -> EXIT_SAPLRRS0_001 -> include 'ZXRSRU01' ->
ISTEP = 1 -> before the variable pop up will be filled by the exit
when 'your variable'
your code
ISTEP = 2 -> after the variable pop up i.e after running your selections, calculates the values for your variables after selection screen execution.
when 'your varaible'
your code
ISTEP = 3 -> Validation purpose and message handling purpose
when 'your variable'
your code

New entries in table TSTC not capturing in scu3 change logs

Hi ,
We have TSTC table log enabled.
New Entries which comes through transport in the table TSTC are not capturing in change logs.
We have created a new Z T-code and transported it to Quality and then to Production.
But in the change logs of the tbale TSTC it is not captured both in quality and Production.
In the table TSTC t-code is present.
But the change log for the table doesnot show any new entry created.
In development change log of TSTC, the change is present but in Quality and Production it is not present.
Development client : 400
Quality Client : 600
Production Client : 600
Can any one spill some beans on it...
Thanks & Regards
Kiran

You need to add "recclient = ALL" (or same client value as "rec/client" profile parameter in RZ10) to the transport profile as well in the STMS.
Search SAP notes and the forum here for "recclient" (without "/")
Cheers,
Julius

Withholding tax not captured for a single Vendor during Invoice

Dear SAP Gurus,
Withholding tax is not captured during MIRO for a particular Vendor. The Vendor Master has been assigned with the relative tax codes. Program RFWT0010 has been run. Tax Types have been
checked. Error message was changed to Warning in OBA5. Message 7Q321 Withholding tax
amount exceeds amount in Vendor line item 001. Relative SAP notes referred. Withholding tax
type at the time of payment Central Invoice & I ppmt checked. OBC4 reconciliation account
G067 field status group checked for taxes - optional. Please give solution.
Thanks and regards,
Sadashivan

Hi,
Check with the minimum amount of the withholding tax code.
Check accumulation activated or not.
If you are using portary dependencies check the base withholding tax code given.
While defining the withholding tax code check the posting indicator and check withholding tax formula is activated or not. if it is active then check the amount given in withholding tax code formulas.
Still problem continue revert back.
Regards,
Sankar

Excise is not captured for all or Second line item.

Dear Experts,
Excise is not updating for all the line items in while making Goods Receipt.
while making goods receipt excise is not capturing for all the line items.
but excise is captured at header level,its presumed that all the line items
are capturing excise,please suggest me,what might be the reason.
Thanks in advance.
Varun

Hello,
As i think, you are creating Goods receipt With Excise option "Only Part1" in MIGO, then system will update only J_1ipart1 table with qty and without internal document number, after J1IEX only system will Update J_1IEXCDTL table with all value and qty and internal document number.
Suppose you have done the GR -Option' 'No excise entry" then system will not generate any Excise realted tables. Then you should Capture Part1 entry with help of J1I5 t code, then system will update qty field , here also system will not update internal doc number.
Write a Updation program for J_1IPART1 table for qty field
Mahesh Naik

Not capturing DM's

Similar Messages

Maybe you are looking for