Not clear images with lower screen resolutions on Tecra M5

Hi,
we have some M5s with Intel graphics board which work fine with the usual 1024*768 screen resolution.
Now we are buying some new M5s equipped with nVidia Quadro, and they seem to have a native resolution of 1400*1050.
If I try to scale resolution to 1024*768 or even 1280*1024, images are badly out of focus. But I think icons at 1400*1050 on a 14" display are really too small, for the average of users.
No solution?
thanks

This is to do with the native resolution of the LCD. Unless you display at maximum resolution, any attempt to work at a lower resolution will require the graphics card to rescale, causing the resultant image to blur as the graphics card interpolates.
The only solution is to use Windows Vista because the GUI has been designed for larger native LCD resolutions, meaning the icons are designed bigger (approx. twice the size of XP)

Similar Messages

  • Fuzzy text characters on Tecra 9100 with low screen resolution

    When using the standard Toshiba S3 video drivers for Windows XP I seem to be experiencing problems with the display when the resolution is set to 1024 x 768 or lower.
    Any text on the screen is fuzzy / weird quality.
    If I select a higher resolution the screen is fine with crisp / sharp text.
    Does anyone know how to resolve this problem?
    Thanks in advance.

    Hi Simon
    Dont panic! This is not a malfunction or a problem
    The native resolution of your internal screen should be higher as 1024x768 therefore you should leave the notebook running with the highest possible resolution.
    This issue was discussed already in this forum. You should check this:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=20874&messageID=77722
    Hope it helps to clarify everything

  • Why are the graphics/page in facebook suddenly smaller font and images? Is not happening in IE and screen resolution is correct.

    Why are the graphics/page in facebook suddenly smaller font and images? Is not happening in IE and screen resolution is correct.

    I heard back from Nike+ support and they said that there will be newer pics soon and it also appears that this corrected itself for my runs, but not the user pic, I only get girly options, I wouldn't mind a picture of a guy on 'ROIDS!!! Just kidding, but something less feminine or cartoon like, I'm trying to be serious about this and the site should reflect that.

  • Can't start MAIL or STORE because of "too low screen resolution"

    I can't start either mail app or store app because of "too low screen resolution".
    My netbook (eMachines eM350) has maximum 1024x600, these app require at least 1024x768

    I have developed a lot of code, and while more recent machines have higher resolutions, I find it prudent not to assume everyone has an 8K panel
    No one cares much what you have or have not done, this thread is not about you. If you'd actually developed any Modern apps you'd know that the minimum resolution for them is, as has been stated numerous times here already. Stating that you develop for 640x480
    displays clearly indicates that you've never developed a Modern app. Additionally, it should be obvious even to you that a minimum resolution of 1024x768 does not assume that everyone has "an 8K panel".
    go write some shaders you clearly have no idea whatsoever about development
    i can make programs rescale to fit any screen size, just because you are too stunned to figure that out
    programmatically designed dialogs can adapt
    Place your rig specifics into your signature like I have, makes it 100x easier!
    Hardcore Games Legendary is the Only Way to Play!
    Vegan Advocate How can you be an environmentalist and still eat meat?

  • Help with T430 screen resolution

    I would like to purchase a T430 with 1600x900 screen resolution as recommended in the reviews. However, I am concerned about whether I will be able to read text at that resolution. (This was an issue with the higher resolution when I purchased my beloved T400.) I cannot find a T430 in my area to look at before purchase. So, I am wondering whether some kind soul might be willing to post a screenshot of the desktop (with icons on it) of their T430 1600x900. Viewed at the original size, I should be able to determine from that image whether it will be legible, right?
    Solved!
    Go to Solution.

    Lilac wrote:
    There are no stores in my area that carry the T430. I would have to travel 3 hours to see one. But if the screenshot would not tell me what I need to know, maybe I will need to do just that.
    I didn't say a ThinkPad.  Any computer with a 14" screen running 1600x900 natively will give you some idea if that resolution is going to be acceptable.
    If the closest computer store is 3 hours, it probably isn't worth doing.  6 hours round trip is a lot of time and hassle.

  • Macbook Pro late 2013 - problem with login screen resolution

    Hi,
    I've got problem with login screen resolution, after upgrade to Yosemite. I use the 4rd resolution (last one) on my Mac Pro (late 2013), and after restart login screen is always on optimum mode... But it's only about the login screen.
    Do you know how can I fix it? I would like to have the same resolution on every screen.
    thx in advance

    I  Reformatted the CF card  on the new computer   it works fine now on the new Mac Pro
    Interesting point about  the low power  of the usb ports   I had to deal with all devices ejecting them selves  when the mac pro  was idle or slept  Drobo needed a Firmware update and another drives  needed  me  to change the sleep setting  or the Mac Pro   to never and  i also  had to deploy a  script to write to each device  ever minute,   this  kind  of sold the problem  with external Hard drives.   I wonder if the lowering  power  to a CF card   can eject  it  in a manor  which would make the  computer  think it is corrupt.
    I have looked at  buying a power usb Hub    but seems only one or two  of the ports are powered. 
    Seems to be a bit problem with the mac pro especially  as everything has to be connected externally  
    Will assume the Firewire Connector does not work.

  • Bridge - How to view image in full screen resolution

    In Bridge - How to view an image in full screen resolution and not as a Preview (Space bar), like in Lightroom (F), Photoshop or ViewNX 2 ?

    The size of the Bridge Preview window will always be the absolute limit of the image display in Bridge.  Maybe I am not following you.  Sorry

  • How to adjust website to work with multiple screen resolutions?

    http://www.allenkey.com.au/
    hello i have recently designed this website and the formatting isnt correct when veiwed with different screen resolutions
    Pleese help!

    hello i have recently designed this website and the formatting isnt correct when veiwed with different screen resolutions
    Just so you'll know, and to keep the thread clear, resolution has nothing to do with how your page renders or is formatted.  A given page will look exactly the same on any resolution screen provided you keep the browser width the same pixel value.  It's the variation in that width from one resolution screen to another that causes the difference.  And yes, it's the fact that you have used absolute positioning as a primary layout method that is the problem for the reason that JTANNA has already mentioned.
    Now - how do you want your page to behave?  Do you want it to be fixed width and centered (that would be the easiest).  In that case, change this -
    <body>
    to this -
    <body>
      <div style="width:928px;margin:0 auto;position:relative">
    and this -
    </body>
    to this -
    </div>
    </body>
    Now, reposition all of your AP containers so that the page is again aligned the way you want, and you're done.

  • Same object size (front panel) with different screen resolution

    Hi everybody,
    I realised an application, and I try to instal it on various computer. The probleme is that they haven't the same screen resolution, so the front panel is not the same on each computer. It is possible to build an application which have the same front panel with different screen resolution ?
    Kriss.

    Hi Krisss,
    switch off any "adapt to screen resolution" switches in the VI properties...
    You should also define "same front panel" and "same object size"! Do you mean the same pixel size or size in mm or size in percent of screen?
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • After install Windows 10, the texts in Skype are not very neat, with low definition

    After  install Windows 10, the texts in Skype are not very neat, with low definition. This has happend just with Skype. Do you know how I can fix it?

    I HAVE FOUND A FIX! Searching through the support blogs paid off in a big way. A minor registry edit is all it took and my drive is working like new! Here's the fix. My system is Windows 10 64-bit.  Resolution 5: Create a registry subkey
    Note To use this method, you must be logged on to Windows as an administrator. If you need help verifying that you are an administrator, go tohttp://support.microsoft.com/gp/admin
    Important Follow the steps in this section carefully. Serious problems might occur if you modify the registry incorrectly. Before you modify it, back up the registry for restoration in case problems occur.
    To create the registry subkey, follow these steps:
        Press the Windows logo key + R to open the Run box. (or right-click on windows icon in lower left corner)
        Type regedit in the Run box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
        In the navigation pane, locate the following registry subkey:
        HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi
        Right-click atapi, point to New, then click Key.
        Type Controller0, and then press Enter.
        Right-click Controller0, point to New, and then click DWORD(32-bit) Value .
        Type EnumDevice1, and then press Enter.
        Right-click EnumDevice1, click Modify....
        Type 1 in the Value data box, and then click OK.
        Exit Registry Editor.

  • Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

    Mail will not display images with .jpeg extension. .jpg works fine. (displays in place when opening the email. What plug-in would correct this?

    If you think you're insane now, try maintaining those pop up menus.
    As far as I know, these menus have not been updated since FW 8, so 
    they are at least two versions old.
    Save yourself a lot of grief by avoiding those menus. There are many 
    other products on the market which do a much better job of creating 
    and maintaining this type of navigation structure.
    Read this link before you climb any higher on this slippery slope:
    http://apptools.com/rants/jsmenu.php
    There was another blog post by the fellow who originally wrote the pop 
    up menu feature, but I can't seem to locate it. Even he says stay away 
    from them.
    Not the answer you probably want, but I hope it helps, nonetheless.
    Jim Babbage

  • Displaying remote panel on different screens with different screen resolution

    Hi
    I am running a vi on the PXI . But when i try to open the remote panel it gets shifted on different screens
    with different screen resolution. I have tried to set the windows run time position using the vi properies
    but to no avail. Can anyone help me on this issue??????
    Regards
    Amit Ahuja

    What is your lv version?

  • Store a URL with given screen resolution

    I need to Save the web page with the GIVEN screen resolution in my local machine.
    The input i receive are URL and the screen resolution parameters.
    I figured that i can extract data from the URL by using the *URL Class and
    using readers* Now i have the data ,i am not sure how to store the data with the
    given screen resolution?? Any help would be greatly appreciated?
    Thnak you

    Do you think i should use applet to render the page
    first and then use the robot class to "Capture" the
    page. Thank you once againIf you want to convert HTML into an image, you are going to need something which renders HTML. Since you are asking on this forum, I'm assuming you want to use Java to do it. You could use a JTextPane, but it doesn't display HTML 2 very well. There are third party components which do it better. If you used some Java component, you wouldn't have to display the page, you could get it's graphics object and create and image, then save it too a file.
    To display a browser or take a snapshot of it with the robot class, your applet is going to have to be signed. Since you haven't given me any information about what it is you are trying to accomplish, I'm not sure any of this is relevant.

  • Not great images with new 6D. Please take a look and give me your thoughts

    I'm going on a 2 week trip to Japan in 3 days so I'm hoping to figure this out before I leave.
    I got my new 6d with 24-105 L lens kit, and also the 70-300mm f/4-5.6 IS USM. It doesn't seem like any of the photos are that sharp without a very high contrast shot in full sunlight. Indoor shots or those with lower contrast (tree bark, leaves, something in the shade, etc.) seem pretty unsharp to me. I'm not sure if the AF just can't get a precise focus, or if the sensor just can't get good detail unless those conditions are met.
    This is my first DSLR, although I've had film SLRs for 30+ years before that, and digital point and shoots for the last decade or so. I'm not sure if my expectations were too high or if there's something wrong with the camera, lenses, AF, or IS systems, or if I'm doing something wrong.
    Some photos are below. I shot them all above the 1/focal length rule and some 2x or 3x or more above that, so in theory that would eliminate the camera shake issue, and also in theory the IS system should give you 2-3 stops so it doesn't seem to me that camera shake should be the issue. (I've also taken tripod shots and had the same issue so I don't think it's camera shake.)
    All are large fine jpegs (20mb) straight from the camera, blown up to 100%.
    santa1 Indoors daylight, no interior lights on, 24mm focal length, 1/30, ISO 1000
    santa2 Indoors daylight, with interior lights on, 105mm focal length, 1/125, ISO 6400
    santa3 Indoors daylight, with interior lights on, 300mm focal length, 1/320, ISO 10000
    santa4 Indoors daylight, with interior lights on, 300mm focal length, 1/640, ISO 20000
    wall1 outdoors, 105mm focal length, 1/500, ISO 100
    wall2 outdoors, 270mm focal length, 1/500, ISO 100
    treebark1 outdoors, 70mm focal length, 1/125, ISO 25600
    treebark2 outdoors, 300mm focal length, 1/320, ISO 25600
    license1 outdoors, 300mm focal length, 1/320, ISO 25600
    leaves1 outdoors, 70mm focal length, 1/320, ISO 25600
    leaves2 outdoors, 300mm focal length, 1/320, ISO 500
    truck, 105mm focal length, 1/250, ISO 100
    Other than the truck badge and maybe the wall photos (high contrast, full sunlight), most of them don't seem that sharp to me. What do you guys think? Most people are raving about how good the low light performance is on the 6d but I'm just not seeing it, not even in moderate light.
    Here's a link to where someone compares a few different cameras one of them being the 6d. My images are not as sharp as them as far as I can tell.
    http://www.etherpilot.com/photo/test/misc/6d_5d3_d600_colfix.jpg
    Any thoughts or suggestions you can give are greatly appreciated! Thanks! 

    Google videos are your friend.  Google Videos is/are better than youtube because they include all of youtube plus everything else.
    You would be amazed how many user-created demos/tutorials/tips videos are out there.  Even more amazing is how specific these videos are.  Specific to your model number of camera, of flash, of lens.  Specific to your particular tiny issue about Lightroom or Photoshop or whatever.
    As for good learning/informational DSLR websites, here is a list of my personal favorites:
    http://www.cambridgeincolour.com/
    http://www.the-digital-picture.com/Reviews/
    http://www.canonrumors.com/
    http://www.lensrentals.com/rent/canon/lenses/telephoto/sigma-50-500mm-f4.5-6.3-hsm-os-for-canon
    The Digital Picture has great reviews, plus a unique lens comparison tool (ACTUAL IMAGES!) in their "TOOLS" tab.
    Lens Rentals contains Roger C's very well-informed, well-respected, and VERY witty commentary on lenses.
    Cambrige in Colour gives a nice, refreshing and very civilized British sensibility to things, and is welcoming to beginners, and has good short writings on basic digital photography concepts.
    Canon Rumors tells you (sometimes) when new equipment is coming out, and has a lively forum that is less flame-y than Nikon Rumors. 
    Scott
    Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
    Why do so many people say "fer-tographer"? Do they take "fertographs"?

  • URGENT: How to fix an application with the screen resolution?

    HI everyone,
    I am desprate and need help.. I have developed an application with Java swing and awt (JFrames, JPanels and...). This application displays perfectly with 1280 x 1024 screen resolution but in a situation where the screen does not support this resolution, a part of my application will not appear. I can not even scroll down to see the reste of the components. Does any one has any idea that how I can resolve this problem! I mean how either I can make my JFrame or panel to scroll down or to change the size of the components according to the resolution!
    Thank you very much and wait for a reply :)

    One of the possible reason of the problem is you must have hardcoded the size of panels and other container that is just right for the screen resolution 1280 x 1024.
    The solution is set the size of the containers that depends on the resolution of the screen.
    You have not explained much detail about the scrolling problem. But I suppose that you have a scrollpane in you GUI and you want to scroll the component inside it even at another resolution.
    try using this
    if p is the panel that is added in the scrollpane then set its prefered size.
    p.setPreferredSize(resolution dependant size).

Maybe you are looking for