Not clear text when printing JTextField

I print (laser/inkjet printing) a panel with multiple JTextFields setting background of both panel and textfield to white and border to null. The problem is that the letters on paper do not apear clear but digitized. (I use Arial font). I have implemented a class to handle the print of a class of type of JPanel but not of JTextField. Is this the problem? Can you suggest a class that implements the print of JTextFIelds which are inside of a JPanel?
Thank you in advance

Hi Dimitar, thanks for your replies. I'm using 2048M, when I do File -> Print, I can see I have 464 pages in my diagram, and I can see all boxes, relations, and text also, no problem, everything shows on the screen.
The issue comes when I either print to file or send to the printer, the text is missing in both cases, the printer here in the office has 4G of memory, there does not seem to be a problem or delay when printing, it just comes out with no text; the Mac laptop I'm using has 8G of memory. I was scaling the pages to get a smaller number of pages printed, but I followed your advice and did not scale down, left it at 100%, with same results. I'm wondering if this is something related to Mac OS X 10.6 ?
Thanks.

Similar Messages

Address Book "Note" is truncated when printing and syncing

I just upgraded to 10.5.2 and this is still a problem: The "note" section of a contact in the Address Book is truncated when syncing to my iTouch (and I've heard the same problem for the iPhone). I haven't run into a limit to the amount of text you can type in a Contact's note section on the Mac. I have some Contacts with rather lengthy notes. But when printing a Contact (and checking the box for the Note to be included) it prints a long note in two narrow columns on one page and if the note won't fit on one page, it truncates it. Even less of the note gets sync'd to the iTouch. If this isn't fixed soon, I'm going to go back to Outlook and my Axim pda. I gotta have my Notes!

Address works with Phonetic Name. Doesn't like the Name only for some reason.
Solved!

"Prop bitmap dll not loaded" message when printing PDF

Getting "Prop bitmap dll not loaded" message when printing PDF. Message started occuring after Adobe Reader upgrade to version 11.
Windows XP
Lexmark P6250 printer
Firefox v17.0.1
Adobe Reader v11.0.0
Thanks;
Paul

Can you try to install the latest Lexmark printer driver (http://support.lexmark.com/index?segment=SUPPORT&userlocale=EN_US&locale=en&productCode=LE XMARK_P6250&page=product).
If that does not help, see this thread http://social.technet.microsoft.com/forums/en/officesetupdeploylegacy/thread/6bdf9d5d-1b14 -4789-b6ee-3aff66889f42

I am not receiving text when they are sent to my phone number , I do receive them when they are se to my email address . Any thoughts

I am not receiving text when they are sent to my phone number , I do receive them when they are se to my email address . Any thoughts

Alll I can say is try to reset your iphone like, taking out the sims card. ALso try loging out of your Facetime and your email on your phone, telll me if that works, and did you try connecting Apple Support Team?

Reader 11.0.4 will not collate pages when printing. Using OS X 10.6.8

Reader 11.0.4 will not collate pages when printing. Using OS X 10.6.8

I'm not 100% sure, but I believe you need Acrobat Pro for that.

Issue with HelveticaNeue text not being included when printing to Adobe PDF?

I have a document (Word 2010 docx) with a section of HelveticaNeue text on the front page that when printing through Adobe PDF the text does not appear.
Using Acrobat 9.4.6
Tried the same document with:
Win2Pdf - Displays correctly
Converted to .doc - Displays correctly
File\Save as PDF - Dispalys correctly
Any ideas? I can post the document up here but I can't see an option to.

You can try disabling the “Rely on system fonts only: do not use document fonts” option in printer properties.
To do the same.In MS Word:
Goto File -> Print
Select Adobe PDF as printer.
Click on "Printer Properties".
Go to "Adobe PDF Settings" tab.
Uncheck the “Rely on system fonts only: do not use document fonts”
Click Ok and try printing the document
Also update your Acrobat to latest version 9.5.0.
You can download the patch form: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5330

Pages 5.2 Table missing text when printed

I created a document with several tables. These tables contain algebra formulas with superscript. I read in another forum that the issue may be the use of the superscript. However their problem only occurred when printing the document as a PDF. I am having the problem printing from both Pages and as a PDF. Some superscript appears as it should. Not all missing text is superscript.
Any ideas? I hate to have to recreate this document in Word. I took me forever to create.
Mavericks 10.9.3
Pages 5.2

Known limitation with Pages v5.2. If you had Pages ’09 installed before the upgrade downgrade to Pages v5.2, it was moved to /Applications/iWork ’09.
You will need to export from Pages v5.2 as Pages ’09 in order to process your work in the older Pages version. You will also need to open the Pages ’09 document either through that Applications file chooser, or via the right-click, contextual menu Open with > Pages (4.3). Double-clicking with both Pages installed will default to using Pages v5.2.
LibreOffice is a free alternative to MS Word, and works better with Mavericks than does OpenOffice.

Margins not lining up when printing back and front of an image

How can I get multiple images on 1 page to line up when printing on both sides?
Dimensions are 3.5x2.5, 9 to a page. They are sportscards for son's baseball team.
They are slightly off by 2-3 cm on all 4 sides and in betweeen. Extremely frustrating. I tried printing in Photoshops but text is blurry. In Lightroom, Images look absolutely perfect. If they would only line up. Please help! Using a Canon MG 6200 if that matters.

You should be able to change you printer's settings outside of applicaitons such as Lightroom. If you are unsure how to do this, you will need to contact your printer manufacturer for instructions.
As for compensating in Lightroom, Victoria means changing the settings within Lightroom so that they are "incorrect" to make up for the fact that you are not getting the expected results.

Notes cut off when printing, issue with margins

When I print a slide with notes, the notes complete cover the width of the page, flush left and right. My printer cuts the margins automatically (not a bleed), so those portions of the text in the notes gets cut off.
Any way to control the margins, left and right, when printing notes from Keynote?

Keynote print layout is a bit of a mess, and is well commented on by users, it prints differently than previous versions, eg in handouts the slide image is much smaller than previously, in grid, the slides are off the printable area on the left.
We are hoping this is fixed in the round of scheduled updates.

Blocking Text When Printing

Hi Adobe Gurus,
I have some forms that have prviously been set up within the organisation.
I now have a requirement to hide/blank out some of the text when the form is printed, as we do not want this information to be visible in hard copy format.
Is there an easy (or difficult) way to accomplish this?
Many thanks.
A

Then I think they should be here.
Are they using Acrobat form tool to LiveCycle Designer to create the forms?
In Acrobat one sets the form field's property for "Visible but does not print"
In LiveCycle Designer one changes the field's "Presence" to "Visible (Screen Only)".

Hp laserjet pro color mfp will not wake up when print tasks are initiated!

Is there anyone that can assist me with a HP LaserJet color printer mfp 200 that weill not "WAKEUP" when print tasks are sent to the spooler?

These settings are for setting up your wireless printer to stay connected to your router, keep wireless devices better connected and make your router secure and hack proof.
1. Set a static IP in the printer (click here) outside the DHCP range of the router (check your manual).
    This is for Linksys routers but can be used for all routers. Verify your DHCP range and change this
    first if needed. More Wireless Printing help is here.
2. Verify in the printer that 'Auto Off' is disabled. Use the Embedded Web Server (EWS) by going to the
    printers IP address in your browsers address bar, click Settings Tab/Auto Off. Or use the Printer
    Assistant, Printer Home Page (EWS).
In the router: (Refer to your router manual for information)
3. Use a fixed wireless channel like 1, 6 or 11, never 'auto', try channel 1 first then the rest.
4. Set router to 20Mhz only, or 145Mbps depending on router.
5. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode.
6. Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your
   system now and helps with wireless connectivity (if you want to know why, search the web).
7. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same,
   they must be different for all bands, even for any Guest networks.
8. Save all settings. Power off both, wait 2 mins. Power on router wait 2 mins.
9. Power on printer and verify it reconnects to router.
Windows 7/8/8.1   Is Network Discovery on or off?
Control Panel/Network and Internet/Network and Sharing Center/Advanced sharing settings.
Under Home or Work (current profile) / Network Discovery.
Select "Turn on network discovery" and save changes.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Accents are not being shown when printing

Hi.
When I print a webpage that contains characters with accents some of than simply disappear, even though the page is displayed correctly on the browser.
This happens especially in uppercase letters.
Does someone know of some configuration I can make to solve this problem or if there is a bug involved?
I'm using Safari for Windows 7, version 5.1.7.

Hi,
Refer to this link...[box not seen in smartform print |box not seen in smartform print]

Some frames are not being shown when printed but it is there in print previ

Hello Experts,
I am currently developing a form in smartform wherein I need to put frames in all cells. When
I print preview, all the frames are there. But when I print it, some of the frames are not shown.
What could be possibly the problem?
Thank you guys and take care!

Hi,
Refer to this link...[box not seen in smartform print |box not seen in smartform print]

Presets not taking affect when printing via adobe reader

I have discovered that after upgrading to Mavericks, when printing multiple page documents via Adobe Reader, it will not take on my 1-sided printing preset and instead prints 2-sided as per the default setting on the printer driver.
Has anyone come across this?

kirstyfiona wrote:
I dont seem to have the option for printing on both sides on the adobe print screen. In the past it would just use whatever preset you currently had set.
I seldom use Adobe Reader except for completing forms and printing them. Preview never seems to get those right. I did do some testing on my Mavericks machine and can confirm that Adobe Reader is ignoring a Preset I created for my EPSON WorkForce 1100. From the CUPS debugging log it would appear that Adobe Reader is bypassing the Apple print window. It would not therefore be picking up a Preset.
Wht make and model of printer are you using? If your prnter uses a PDE to set duplexing, I can imagine that Adobe Reader is not going that deep. It would look at the PPD and just use whatever is in there. If you let me know the printer make and model, I may be able to confirm that. I am not sure that will get you any closer to a sulution. It may help answer "why".

Custom colors in FrameMaker 10 not being maintained when printing PDF using Distiller/Professional X

Hello all,
I am working my first tech writing job that requires printed material instead of just PDFs, and I am having problems with the logo colors when it comes to printing them.
I created the two color definitions in FrameMaker 10 (using colors Pantone 485 CVC and Pantone 281 CVC). These colors are used for diagram callouts and doc titles.
I recently upgraded to Distiller X and Acrobat Professional X, thinking that maybe the older versions just didn't support those colors, and I am still getting the same result. Instead of printing the colors I added, the PDF is printed with the default red and blue. FrameMaker is using the CMYK model.
I have a feeling that I just need to adjust some settings, but I don't know whether to adjust Distiller, Acrobat, or FrameMaker. Anyone else have issues when trying to use their company's colors? Any ideas on what might work?
Thanks in advance,
Smitty

John,
I'm not even sure what printer we use since we send the PDFs out to be printed on a glossy paper (I'm new to the position so I don't have all the details yet). All I use is my Adobe PDF printer. I'm also not using FileMaker, I'm using FrameMaker since I am producing manuals that will be printed, not marketing material or anything with a lot of images. I am just trying to get the logo colors to appear correctly in the PDF so that when it does get printed off-site, the Pantone colors are seen and not the default in the final product. I will post this in the FrameMaker forum as well.
Thanks for your response.
Smitty

Not clear text when printing JTextField

Similar Messages

Maybe you are looking for