Not clear with the order status.

I tried placing an order for unlimited europe subcription yesterday via debit card but was declined saying issuing bank doesn't allow such transactio. Then I chose WU, which I had tried using before but coulnd't get a merchant who knew of skype. This time it said the order accepted, status shown as pending and read that it will be updated regarding payment in 24 hrs. A day gone can I know what next.

By default any floating-point literal in Java is a double, so the trailing D that specifies that explicitly is redundant.

Similar Messages

Not clear with the statement ( A large double value with redundant D )

Hi,
I am not clear about the statment below. What does redundant D means.
*123.4E+306D// A large double value with redundant D*

By default any floating-point literal in Java is a double, so the trailing D that specifies that explicitly is redundant.

Not clear with the Authorization concept for Marketing Plan

Hi All,
I am new to CRM and was going through some of the prescribed document for CRM marketing
when i encounter with the authorization concept in marketing plan,for example how
can i restrict a user with a campaign manager role from changing marketing plan.please
provide the step by step procedure.
Regards,
Sanju

Hi Sanju
User with a campaign manager role can be restricted for changing marketing plan using authorization group.
We define authorization groups for use in the Marketing Planner. Authorization groups can be maintained at both marketing plan level and campaign or trade promotion level. Authorization groups enable us to control which users are authorized to change which of these two types of marketing project. We could, for example, define one authorization group to be assigned to a marketing plan, then define further authorization groups to be assigned to the different campaigns within the marketing plan. In the Marketing Planne.
Follow below steps
1. Define authorization group using following IMG Path
Customer Relationship Management / Marketing / General Settings / Define Authorization Group.
2. In authorization object CRM_CPGAGR of the role Campaign manager maiantian activity 01, 02, 03 ,06 (this will allow user to create, change, display and delete)
3. IMG defined authorization group ex: ABC can be seen under the tabstrip Basic Data of marketing plan.
4. Now user have to choose the Authorization group ABC from the drop down in Basic tab to create a marketing plan. User will get the change access for all the marketing plan which have the authorization object ABC.
Hope this will help...
Rgds
Mallikarjun

BAdI /SAPAPO/DM_PO_MNTN - CT_ORDKEY is not populated with the order data for PO Memo

Dear All,
I have done enhancement in the ERP system by adding the customer specific field ZZ_RESWK in structure CIFPUORCUS. This field is filled in the ERP user exit EXIT_SAPLMEAP_001, for the Purchase order (category BF & BG) and PO Memo (Category AH).
Now, in APO I have implemented the BAdI /sapapo/dm_po_mntn, and in the method "Change" I am passing the field zz_reswk to ct_ordkey table field reswk, so to write the field in livecache.
This set up is working for order category BF and BG. However, when I am transferring the PO memo (Category AH) from ERP to APO, the the BAdI internal table ct_ordkey is having no records. Hence I am not able to write field reswk for the PO memo in the live cache.
Any one have any idea, why there is not data in ct_ordkey for PO memo ?
Note: The data transfer from ERP to APO is using IDOC.
Please Help.
Regards,
SC

Hi,
If you don't do what I told you, I can not do anything more....
Your code should look like this:
loop at it_item into ls_item.
ls_cust-refobject = 'POITEM'.
ls_cust-fieldname = 'CATALOGID'.
ls_cust-REFFIELD1 = 'PO_ITEM'. <b>and not 'POITEM'</b>
ls_cust-REFVAL1 = ls_item-number_int. <b>and not a fixed value</b>
ls_cust-container = ls_item-catalogid.
append ls_cust to ct_bapi_customer_fields.
endloop.
For R/3 mapping table BBP_CUFMAP:
DOC_TYPE = PO
KEY_TYPE = Z
CUF_FIELD = CATALOGID
R3_FIELD = ZSRMCATALOGID
Rgds
Christophe

Registering application - RegistrationStatus and ConnectionStatus are inconsist with the real Status

Hi!
I have a mobile program develop in Windows mobile 6.5, SUP2.2 and it is a native application.
Sometimes the RegistrationStatus is 203 (Registered) but in SCC the Application Connection is offline.
In other times, the RegistrationStatus is 205 (Unregistered) and in SCC is offline, but when the program(C#) call registry method throw Exception that said : The client state error.Client is already started.
I dont know why when I create the Application object by getInstance method, the RegistrationStatus is equals 201 but When I set property ApplicationIDentifier = "appID" the RegistrationStatus is automatically change to 203 (registered).
finally the property RegistrationStatus is not compatible with the real status in SCC.
Thanks

Increase the debug level in SCC as given below and check the logs to troubleshoot the issue.
Also note that when the application is not in use, in SCC the connection goes offline. When you run the app again it goes online. And if the app is killed you need to check whether app is registered or not before a transaction. I managed it using a splash screen. Only when app is killed, run the splash screen and check in background whether app is registered or not. If not registered, register again.
Midhun VP

I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV. After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the or

I'm on a windows laptop using iTunes sharing through the family to connect with Apple TV.
After choosing the folder of photos to be shared and displayed on the appletv and when I choose to show on screen, they are not shown in the order they are in the original folder.
How to pair show in a certain order, for example, sorted by name.
grateful
Julio Cesar

Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

We feel it better to have a status bar in firefox.we got it in firefox3 but can't find in firefox4&lettest.its really embarrasing for us not to see the exact status of browsing.is there any solution to browse lettest version with old status bar.pls answer

we feel it better to have a status bar in firefox.we got it in firefox3 but can't find in firefox4&lettest.its really embarrasing for us not to see the exact status of browsing.is there any solution to browse lettest version with old status bar.please answer or we have to use the old one because its very ugly to see a revolving status.

I checked the status of the server and hard drive by booting off of the 10.4 installation disk, select utilities and disk utility.
I know very little about terminal, however I'm pretty good at dos so I can figure some things out if given some commands.
Anyway, I ran some commands and here are the results:
megaraid -showstatus
MEGARAID CLI version 1.0.12
No cmd argument
Um, so I think I remebered the command incorrectly and I did -showdevices instead. Sorry.
megaraid -showdevices
Physical devices Available = 3
Drive ID Identification Size(MB) Status
0 Hitachi HDS722580VLSA80 78529 Failed
1 Hitachi HDS722580VLSA80 78529 Online
2 Hitachi HDS722580VLSA80 78529 Online
diskutil list
/dev/disk0
#: type name size identifier
0: Applepartitionscheme *153.3GB disk0
1: Applepartitionmap 31.5KB disk0s1
2: AppleHFSServer HD 153.2GB disk0s3
/dev/disk1
#: type name size identifier
0: Applepartitionscheme *2.6GB disk1
1: Applepartitionmap 31.5KB disk1s1
2: AppleDriveATAPI 4.0KB disk1s2
/dev/disk2
#: type name size identifier
0: untitled *467.0KB disk2
/dev/disk3
#: type name size identifier
0: untitled *95.0KB disk3
/dev/disk4
#: type name size identifier
0: untitled *95.0KB disk4
/dev/disk5
#: type name size identifier
0: untitled *95.0KB disk5
/dev/disk6
#: type name size identifier
0: untitled *219.0KB disk6
megaraid -showconfig
Logical Drive RAID Level Stripe Size(KB) Size(MB) Status
0 5 64 156958 Degraded
megaraid -showapater
FW Version = A130
Bios Version = G117
Product Name = MegaRAID SATA 150-4D
Cache Size = 64MB
diskutil checkRAID
No RAID sets found
Thank you for your help. I really appreciate it and so do the teachers and the students!

I ordered at around 12:30AM pacific and it does not show in my order history. When I look it up on the order status page, it just says "received and processing". Do I have any chance of getting it on friday?

I ordered at around 12:30AM pacific and it does not show in my order history. When I look it up on the order status page, it just says "received and processing". Do I have any chance of getting it on friday?

It seems to depend on a variety of different things.
Verizon appears to be going by the process time of orders, and not the order time of orders. Your process time will be the timestamp on your confirmation email.
It also depends on which model, GB, and color you ordered. The 6+ were in high demand and low supply.
It also depends on which warehouse (order location) your order was being processed through. Verizon reps have told me that some warehouses have more of certain phones than others, and if your order went to a warehouse that doesn't have enough of that particular phone then you are SOL and will have to back for a backdated order.
There is a possibility you will get it, but if you ordered any of the 6+ models, then it is unlikely.

POSTING ERROR-MESSAGE POSTING BALANCE NOT CLEARED FOR THE PERIOD 2/2008A

Hi
I have a problem in payroll posting. While posting for one employee's persn number rejected and gave a message as Posting Balance not cleared for the period 2/2008A. To come out of the problem I changed the Payroll status record using pu03 changed the Erliest Retro date as 01.06.2008. Again tried to post but not posted again same Message displayed. After changing the Erliest Retro record I have not run the payroll for the particular employee. Is it required to run the payroll for the employee after changing the status in PU03. Request to guide on this
Thanks
EKP Yadav

Hi there
The posting may be out of balance for the employee because their credits dont equal their debits...
Do a test posting for the employee with the log on, this will tell you what amounts are being posted - and should give you an inidcation of where the balance is not cleared...
Yes, you would have to re-run the employee if you'd changed the retro date in PU03, but I dont think that will fix your posting problem....Should the employee have retroe'd?
From what I have seen, just changing the control record doesn't usually fix an out-of balance..there is usually another reason....eg wagetype incorrectly posting to the wrong number of accounts....or a missing wagetype on the employee (eg bank details...no /559 for the net pay to go to).
Cheers
Mary

'The provider is not compatible with the version of Oracle client error' popping up randomly

I have several asp.net pages running on an application server which generally work without issue. However I've had the Server error "The provider is not compatible with the version of Oracle client error" crop up twice seemingly randomly that affects all of my pages that interact with the DB server. A simple reboot of the application server solves the issue and the pages run again with no problems. What could be causing this problem?

Sorry if I wasn't clear initially. Basically I've got 2 different applications in 2 different IIS folders on the webserver, each with several asp.net pages. They work fine for a period of time and then inexplicably that error gets thrown and affects all of my asp.net pages in both applications. The admin tells me that the other older applications on the same server are unaffected. A simple reboot of the server fixes the issue until the next time it happens (I can't identify any consistent point where this crash happens, the admin originally suggested that there might be something in my code causing a memory issue). I had the same applications hosted on my local machine for a time and this never happened as well as it never happening when I run them in localhost. How can I trace whether or not another part of my application is trying to load ODP.NET by itself? How can I verify the DLL search order for my application?

HT1657 I had rented a movie on my IPhone5 and after downloading almost all of it, I get an error that there is no enough space. Why doesn't the store check to see if I have enough free space before proceeeding with the order?

After downloading almost all of it, I get an error that there is no enough space. Why doesn't the store check to see if I have enough free space before proceeeding with the order?
How do I get a refund?

Well, with apps genneraly you do get told ahead of time. I'm not sure of the current algorithm with movies though.
Why not just clear up some space? You can check your usage in your settings btw.

Why the doc total amount is not matched with the total item line amount?

Hi,
Recently when i try to update something in sales order via my add-on, i got an error said u201CThere is a difference between the document total and its components. [ORDR.DocTotal][line: 0] Iu201D Then i checked the sales order in SAP B1, I found the document total amount was not matched with the item line total amount. Actually the item line is quite simple, there is only one item line with qty 1. How comes the document total could be different with the amount from item line? I know the document total amount is a read-only field which is calculated automatically by SAP. This is really weird for us, we don't know how this happened.
Has anyone experienced similar situation like mine and how this happens?
Thanks,
Lan

I am having this same issue and I have additional information.
I am on ver. 8.8 PL 16.
Periodically (mulitiple times a week), when a Sales Order is created, the Doc Total amount is -zero- when there are clearly items that have a price associated with them. This causes an error when Adding the document. Sometimes, I can just change the quantity of one of the items, which forces the Doc Total to update. Most of the time this does not work, though. I end up having to restart the SAP client and then everything begins to work as it should.
This behavior is occuring on mulitple machines in our office.
Earlier in this thread, Rahul mentioned that they currency rounding was turned off and that this could be part of the problem. In fact, we were having issues with Currency Rounding and did turn it off not long ago. Rahul, can you explain better what you meant by "give the proper amount so that you can overcome the error..."
Randy Davis
Denver, CO
Edited by: Randy Davis on May 16, 2011 2:01 PM

ICal Week view, Date is not aligned with the Time(schedule) of each date

Well, just like it says over there (`` ). I've recently been to China for a business trip, and I suppose the different time zone may have had something to do with the problem. Now I'm back home, changed the time zone back to normal, still the iCal shows in the weekly view that the Date on the above is not aligning with the Time and schedule. Any suggetions would be grateful!!!

Hi,
i omit the scheduling maergin key in material master,
the result of MRP is
BASIC DATES
Finish 15.10.2009
Start 14.10.2009
PRODUCTION DATES
15.02.2010 14:33:25
14.10.2009 07:00:00
scheduling type i planned order is still "backwards"
so in MD04 it is say that the goods is available at 15.10.2009 same with requirement dates.
this seem not right.
it seems that order finish date is not adjusted by lead time scheduling on "today scheduling".
Is there a way so order finish date is adjusted by lead time scheduling on "today scheduling" ????
Best regards,
Freddy Ha
Edited by: Freddy Halim on Oct 14, 2009 10:01 AM

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4

Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport

The provider is not compatible with the version of Oracle client

We are running Server 2012 64 bit with multiple homes one is 32 bit and the other 64 bit. We installed the 64 bit first then the 32 bit next in order to get our Classic ASP WebSite that is using COM+ and OLEDB to see the provider.
C:\oracle\product\12.1.0\x86
C:\oracle\product\12.1.0\x64
The other Websites are ASP.Net 4.0 and are running in 64 bit application pools. They are using a DAL .Net assembly built x64 with a reference to the 64 bit ODP.Net version 4.121.1.0 in C:\oracle\product\12.1.0\X64\client_1\odp.net\bin\4.
I also see there is another folder C:\oracle\product\12.1.0\X64\odac_1\odp.net\bin\2.x with version 2.121.2.0. We are on running Framework 4.0 but when I switch to this version it works but with the version out of the bid\4 we are receiving the following error when the 64 bit Websites call the assembly:
The provider is not compatible with the version of Oracle client
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Oracle.DataAccess.Client.OracleException: The provider is not compatible with the version of Oracle client
Source Error:
Line 87: mDataSource = dataSource
Line 88: mConnectionString = GetDBConnectionString(dataSource)
Line 89: mConnection = New OracleConnection(mConnectionString)
Line 90: mParams = New List(Of IDbDataParameter)
Line 91: End Sub
I have not been successful in getting this to work after spending endless hours, so any help would be appreciated.

Hi,
Oracle Client/ODP build with certified Visual C++ Libraries so application using ODP.NET requires "runtime components of Visual C++ Libraries" to be installed.
Oracle Database Client installation includes the Visual C++ Libraries but ODAC doesn't contain these libraries which may cause such issue.
Please check the Note 43208.1 for the particular version of Visual C++ installs with Oracle Database Client installation(e.g. 11.2.0 Database Client installs Visual C++ .NET 2005) and also you can refer the windows event log error massage to verify which version of Visual C++ is missing.
thanks and regards
Venkat

Not clear with the order status.

Similar Messages

Maybe you are looking for