Not compatible with this ipod?

I tried to buy an app on the app store on my iPod touch 3rd generation and it said not compatible with this iPod touch.  I know its compatible. I have the latest software, IOS 4.2.1, and the app said I needed a 3rd generation or higher.  so I went on iTunes on my computer and downloaded it on to iTunes. then I tried to download it to my iPod from there.  I spent 6.99 and it said the same thing, not compatible with this iPod. WHATS HAPPENING!?!?!

Sounds like you may have a 2nd generation unit. Please check the model number on the back. A1288 is a 2nd gen. A1318 is a 3rd gen.
Stedman

Similar Messages

  • I cant back up my ipod touch 5 on itunes. it say "because the back up was corrupt or not compatible with this ipod". i am using windows 7, ios 7 and i didn't jailbreak it.

    What can i do?

    If you now go to iTunes>Preferences>Devices what is listed under backups?
    You can post a screen shot if you want.
    Also see the follow for more suggestions:
    iOS: Troubleshooting backup issues in iTunes

  • Accessory not compatible with my iPod

    I have been playing my iPod on my new Bose speaker system for months now. All of a sudden, my ipod doesn't play and I get this message: The currently attached accessory is not compatible with this iPod." My friend's iPod plays just fine on this same Bose speaker. I have restored my iPod to its factory settings, but that didn't help.

    Deurmekaar:
    Welcome to Apple Discussions.
    The Camera Connector is NOT compatable with the Nano.
    David

  • I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod.  This is the first time trying to backup.

    I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod.  This is the first time trying to backup the iPod. I have authorized my computer.  Still no luck.

    Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
    Also
    - Reboot the computer
    - Try another cable
    - Try another USB port

  • Every time I sync my itouch I get the following message - "iTunes could not back up the iPod because the backup was corrupt or not compatible with the iPod.  Delete the backup for this iPod, then try again." But I get the same message again.... Any ideas?

    Every time I sync my iTouch I get the following message - "iTunes could not back up the iPod because the backup was corrupt or not compatible with the iPod.  Delete the backup for this iPod, then try again."  However, when I follow these instructions, delete the backup and try again - I get the same message.  Any ideas what is wrong?

    Hi,
    Try this thread.    https://discussions.apple.com/message/12661408?messageID=12661408
    Carolyn  

  • For some reason everytime i connect my ipod touch 4th generation, a message comes up saying that my ipod could not be backed up because it was either corrupt or not compatible with my ipod, how do i fix this problem??

    Everytime i connect my ipod touch to my laptop the message that either the backup was corrupt or not compatible with my ipod shows up.  It was working before but idk why this is happening now!?

    See here: iOS: Troubleshooting backup issues in iTunes
    B-rock

  • "Airport Express" is not compatible with this version of itunes

    Hello- My itunes reports that my airport express is not compatible with this version of itunes.  My ipod and iphone no longer sync with the device either.  Any suggestions?  Thanks!

    Does anyone out there have any advice?  I have had no success correcting this problem........

  • Old Composite Video cable (Tangerine iBook) not compatible with Video iPod

    I discovered a little surprise.
    Despite being exactly identical on both ends of the cable, an old Apple Composite Video cable, originally purchased for a Tangerine iBook, is not compatible with Video iPod.
    Anybody confirms such situation, or is it just my Video iPod with a faulty video output?
    Ciao
    30G Video iPod Fifth Generation   Mac OS X (10.3.9)  

    Gerardo
    The cable may look the same but it's wired differently. Please see this for more info :
    http://www.tuaw.com/2005/11/01/how-to-convert-an-ibook-av-cable-to-an-ipod-av-ca ble/
    regards
    Brian

  • I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to che

    I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to check your printer settings before printing."  I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.

    Hi ,
    Please update to PSE 13.1
    13.1 has solved this problem.
    Refer to this link.
    Photoshop Elements Help | Printer errors with Photoshop Elements 13

  • Photoshop CS2: "file not compatible with this version of Photoshop" error

    So, I've been working with Photoshop for almost 20 years now, and lately I've been getting this error message on occasion (but not on every file) when I go to open a file I worked on just yesterday: "Could not complete your request because the file is not compatible with this version of Photoshop." I just worked on it yesterday in Photoshop. The file was saved as a PSD, and when I attempt to open it through Painter IX, that program tells me that it's not a Photoshop document. Why can't I open this file anymore, and why is it giving me this error message when I don't have Norton AntiVirus installed, and my 'maximize PSD and PSB file compatibility' is set to 'always'??
    Does anyone have an idea on how I can open my file? How can I get around this, and how do I prevent it from happening again?
    OS: OSX 10.4.11
    Photoshop CS2
    Info:
    Kind: Adobe Photoshop file
    Size: 394.4MB
    Created: December 13, 2007
    Modified: Yesterday at 3:54 PM

    This is the boilerplate text I use in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
    If you are opening files over a network or saving them to a network server, please
    cease and desist immediately
    in the event you are currently experiencing problems with one or more files.
    Working across a network is not supported.
    See:
    http://www.adobe.com/support/techdocs/322391.html
    Copy the
    CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
    Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
    Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does
    not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
    If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
    When problems arise, a lot of valuable work can be lost.

  • How do I access "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...." web sites; when I try to download any alternate browser, then a warning that alternate is "imcompatable with your opera

    How do I access websites that warn: "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...."? When I try to download any alternate browser, all I get is another warning that the alternate is "not compatible with your operating system." Is Firefox preventing this? The site listed below is a job application site. I've had this same problem with other job application sites also.
    == URL of affected sites ==
    https://storefront.kenexa.com/lithia/cc/Home.ss

    There should be a User Agent Switcher menu item under Tools, which gives you the browser names you can impersonate.
    The menu item name changes to the browser UA you are presently using.
    There is also a User Agent Switcher button, you can add it using View -> Toolbars -> Customize, and dragging the button to your toolbar.
    See http://chrispederick.com/work/user-agent-switcher/features/ and http://chrispederick.com/work/user-agent-switcher/help/
    You can just start trying IE versions (or the versions it says on the site) until it lets you in.

  • RCVCAT database is not compatible with this version of RMAN

    I am getting the below error while trying to configure rman catalog datababse.
    rman target prod_dba/Pass1234@proddb catalog cat_dba/Pass1234@catdb
    Recovery Manager: Release 9.2.0.1.0 - Production
    Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
    connected to target database: TESTDB (DBID=2409515669)
    connected to recovery catalog database
    recovery catalog is not installed
    RMAN>
    RMAN> register database;
    recovery catalog is not installed
    recovery catalog is not installed
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of register command at 07/20/2007 19:05:40
    RMAN-06429: RCVCAT database is not compatible with this version of RMAN
    RMAN>
    And Oracle version is same in proddb and catdb
    SQL> select * from v$version;
    BANNER
    Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
    PL/SQL Release 9.2.0.1.0 - Production
    CORE 9.2.0.1.0 Production
    TNS for 32-bit Windows: Version 9.2.0.1.0 - Production
    NLSRTL Version 9.2.0.1.0 - Production
    any inputs...
    Thanks.

    Hi,
    when upgrading catalog am getting the error like,
    error occurred in source file: krmk.pc, line: 6986
    text of failing SQL statement: ╠≥`☺
    ORACLE error from recovery catalog database: ORA-00942: table or view does not e
    xist
    error occurred in source file: krmk.pc, line: 6986
    text of failing SQL statement: ╠≥`☺
    ORACLE error from recovery catalog database: ORA-00942: table or view does not e
    xist
    error occurred in source file: krmk.pc, line: 6986
    text of failing SQL statement:µ`☺
    ORACLE error from recovery catalog database: ORA-00942: table or view does not e
    xist
    Whether i need to run catpath.sql etc on the db?

  • TARGET database is not compatible with this version of RMAN

    I am trying to register a database (version 8.0.4) on my catalog database which is version 8.1.7.
    I get the following error:
    RMAN-06185: Recovery Manager incompatible with TARGET database: RMAN 8.0.4 to 8.0.4 required
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00554: initialization of internal recovery manager package failed
    RMAN-06429: TARGET database is not compatible with this version of RMAN
    Does this mean that my RMAN database has to be 8.0.4 ?
    What happens if my RMAN database is 8.0.4 and target is 8.1.7 ?
    Thanks for any help,
    Sameer

    check RMAN compatibility matrix
    Target/Auxiliary Database|| RMAN Executable|| Catalog Database ||Catalog Schema
    8.0.3 8.0.3 >=8.x 8.0.3
    8.0.4 8.0.4 >=8.x >= 8.0.4, see "Note 2: 8.1 or Later Catalog Schemas and 8.0 Target Databases"
    8.0.5 8.0.5 >=8.x >= 8.0.5, see "Note 2: 8.1 or Later Catalog Schemas and 8.0 Target Databases"
    8.0.6 8.0.6 >=8.x 8.0.6
    8.0.6 8.0.6 >=8.1.x >=8.1.x
    8.1.5 8.1.5 >=8.1.x >= 8.1.5
    8.1.6 8.0.6.1 >=8.x 8.0.6
    8.1.6 8.0.6.1 >=8.1.x >= 8.1.x
    8.1.6 8.1.x >=8.1.x >= RMAN executable
    8.1.7 8.0.6.1 >=8.x 8.0.6
    8.1.7 8.0.6.1 >=8.1.x >=8.1.x
    8.1.7 8.1.x >=8.1.x >= RMAN executable
    9.0.1 >=9.0.1 >=8.1.x >= RMAN executable
    In other words to backup 8.0.4 version u need a separate schema in catalog database and which will be only used for 8.0.4

  • CS6 file "not compatible with this version of Photoshop"

    We are using Adobe Creative Suit 6. Yesterday i've created a file, and today i cannot open it with any software. (Bridge shows the thumbnail but the file is corrupted.) I get the "Could not complete your request because the file is not compatible with this version of Photoshop" error. The file contains multiple layers, without any masks. Originally it was a NEF file (Nikon raw). I used vanishing point, because its an interior photo. (it doesnt relevant for the problem) I have an earlier version, where the vanishing points are defined, but the textures are missing. Main question is, how this can be??? I worked on that version for more than 2 hours. The file size is small, it's only 133.579.959 bytes (133 Mb). The image is 4288 x 2848 px, 240 DPI, RGB 8-Bit, Fogra39 ICC profile. The computer is up to date, nor the hw or the softwares are corrupted. The file saved locally, so it's not a network problem. I saved the document, and left the machine for about 15 minutes, then i went back, so the save had to be complete. (on SSD it took about a couple of secs) The biggest problem is, i have to work with a large amount of photos in Photoshop. But after this i have some bad feelings about this job. We have to create these PSD files both for ourselves and for our client for further use. (It's a huge furniture factory) The hardware has 16 gigs of RAM with an Intel i5 operating system Windows 8.1. Any ideas? (ps.: i didnt' find PSErrorlog.txt file) Oh i almost forgot. After installing CS6 my Adobe Acrobat Pro stopped working in about 2 weeks... So. The job is waiting, but we cannot wait for a long time, we gonna loose our biggest client because of a sw error?

    You write this is not compatible with this version. Did you install all updates and did you update the camera raw too?

  • RMAN-06429: TARGET database is not compatible with this version of RMAN

    he Hi,
    how can i solve this issue . how i will upgrade the Rman. My production database details are below
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
    PL/SQL Release 10.2.0.1.0 - Production
    CORE 10.2.0.1.0 Production
    TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production
    while i'm configuring rman i'm getting below error . please help me.
    C:\Documents and Settings\vj.dcruz>rman target / catalog rman01/rman01@upp
    Recovery Manager: Release 11.2.0.1.0 - Production on Wed Sep 14 08:18:02 2011
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    Recovery Manager incompatible with TARGET database: RMAN 8.0.4.0 to 10.2.0.0 required
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00554: initialization of internal recovery manager package failed
    RMAN-06429: TARGET database is not compatible with this version of RMAN
    rgds,
    john

    Johnvd wrote:
    Hi Hemant,
    i'm doing same thing login 10.2.0.0 database and configure the rman but while connect target its saying that my Recovery Manager: Release 11.2.0.1.0 - Production on Wed Sep 14 09:04:59 2011
    how its happening is there any where i have to change the path.
    Regards,
    johnJohn, you need to use the RMAN binary which is located in bin folder of Oracle Database (ie /u01/oracle/product/10.2/db1/bin). You shouldn't use "rman which comes with Oracle 11g client".
    If you are using windows, run the following commands in command prompt and then copy/paste the output:
    echo 5ORACLE_HOME%
    echo %PATH%
    If you are using unix, run the following commands in terminal and then copy/paste the output:
    echo $ORACLE_HOME
    echo $PATH
    Regards
    Gokhan

Maybe you are looking for