Not connecting to display

I've been using a custom rig using the MSI 970A-G46 with an AMD video card, and it's been running great for about a year now. However, I recently have been unable to connect it to any display devices.
Here's what happened.
-Unplugged an HDMI cable from the video card and stopped receiving signal to the monitor
-Swapped DVI cables, no input from the card
-Hooked the monitor into another card and received signal just fine, therefore the monitor works
-Removed the video card and inserted it into a different motherboard, received no signal input testing several different cables and two different monitors
-Tried a different video card in the original motherboard, but received no signal from it
-Replaced all original components, separate video card confirmed working
-Reset the CMOS of the motherboard, nothing
-All fans spin up
-Apparently, both video card and motherboard are not working
Any possible fixes other than what's been tried already?

And most important: >>Posting Guide<<

Similar Messages

Can you mirror a Mac Mini to an AppleTV 3 when the mac mini is not connected to a display?

Hello, I have an AppleTV 3 connected to my television and a late 2012 Mac Mini that is not connected to a display/monitor/tv, but I use it as my iTunes server to stream media to the appletv . However, I was hoping I could mirror the Mac Mini to the AppleTV in order to see Safari and regular Hulu on the television, but when I try, the picture is scrambled and crashes the mac mini. I turn on airplay mirroring using the Rowmote application on my iphone since I cannot see what the mac mini is displaying.
Additionally, I tried connecting the mac mini to a 2nd hdmi port in the television, while the appletv is connected to the 1st hdmi port, but the image was also scrambled with mirroring turned on. My television also has a VGA port that can connect to the Mac Mini, but I figure the same problem will occur and have not bought the DVI to VGA cords.
Is there a way to mirror a mac mini to an appletv without the mac mini connected to a separate display and if so, what am I doing wrong?
Thank you for the responses, I appreciate any help.

Welcome to the Apple Community.
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer).
On the basis of the specifications you have given for your set up, mirroring should work.

My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data.

My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

IPhone 4s Sporadically not connecting to 3g even though the 3g symbol is displayed.

Hi,
I purchased my iPhone 4s (Simfree) from the Irish online apple store back in November 2011.
Since purchasing I was having a very annoying problem where by the phone would sporadically not connect to 3g but would display all the characteristics it was trying i.e. 3G symbol with little activity circle. The quickest fix was to restart the phone which would work again for a few days until it would happen again.
From experience, it seemed to happen more when I went from WiFi to 3G. If I had to give a guess I would say it was like it just couldn’t make the switch from WiFi to 3g and resulted in no internet when on mobile data. Note: It always worked on WiFi no matter what)
I tried all the usual things like restoring the phone to factory settings and closing all apps running in the background before leaving WiFi but the problem kept appearing.
After months of trying different configs I think I’ve finally solved it.
I enabled “Data Roaming” from settings\general\network and so far so good. The strange thing is, I shouldn’t need “Data Roaming” turned on as I don’t roam. My wife’s iPhone 4 and my last two iPhones all had this function turned off by default.
I decided to post this as it was so annoying; it actually took away from owning the 4s when it should be a joy to own. I only hope this helps someone else with similier problems to my own.
Thanks,
Mark
PS: Remember to turn “Data Roaming” off when traveling or you could end up for some pretty big bills

my wife's iphone 4S has the same problem. All of sudden 3G data is no longer working and battery is draining very fast, to the point that you can see the percent points going down as you look at the phone.
I found a solution on this forum http://www.iphoneforums.net/forum/iphone-help-15/4s-data-not-working-3g-23911/ that seems to fix the data problem at least. Don't know about the battery problem as I have just applied the fix.
I read on the Apple discussion forum about a quick easy fix that the German T-Mobile is telling their customers to do to circumvent this Apple software issue. The phones affected are apparently only the 4S with OS 5.0.1 (9A405). This fix works for about 80% of the 4S phones that have this problem.
Go to:
Settings>Phone>Sim Pin>Sim Pin Off.
You may have to reboot the phone for the change to take effect. The change works on my phone. Good luck. And thanks for nothing, Apple.

MBP not connecting to external VGA display

Hello everyone,
I have an issue with my MBP (13", Mid 2009) and my external monitor (Samsung SyncMaster 2343NW).
I'm connecting the display using a simple Mini DisplayPort to VGA adapter.
The problem is that it is not a consistent issue. Sometimes it works, sometimes it doesn't.
I set up the external monitor as the main one (when it is connected), but since the very beginning I did this, I had problems setting the screen resolution. Sometimes it recognised the optimal resolution and used it, but sometimes it did not, it used something like 1024x768 and I can't set the appropriate resolution in the Preferences Panel since it is not available.
Some of the latest times I tried to connect the display I tried to wake up my Mac with the lid closed (using a usb keyboard to wake it up) to force it to try and connect to the display. But now even this "trick" does not do anything (the Mac just wakes up and lightens its own display, even if the lid is closed).
Also, when I connect the VGA cable to my adapter, the monitor turns from its "no signal" message to a black screen, while when I connect the adapter to my MacBook, it does not react in any way (does not show the typical "light blue screen" that usually says *I'm connecting to some external display, wait a second*)
I also have another Mini DisplayPort to HDMI that I use to connect to other peripherals, and it works fine..
Also, the monitor works fine on another PC.
So.. I can't understand what's going on!
Whay would you suggest?

Hi,
HDMI to VGA cable won't work, you need a converter to convert from digital to analog. The following device is one example:
http://www.jaycar.com.au/productView.asp?ID=AC1638
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Thinkpad Edge S430 - Windows does not detect external display connected via HDMI

On a Thinkpad S430 with HD4000 integrated graphics, an external display connected via a HDMI cable is not detected at all when using Windows. The system is fully updated as of the time of posting this message, both via the Lenovo Update tool as well as Windows update.
The Intel driver version is 8.15.10.2696. It appears that this is the latest version, since it does not offer an update when I try to auto-update it via Device Manager.
NB: I am running Ubuntu 12.04 with kernel 3.4.0 on the same machine, and the external display works perfectly fine with this software configuration.
Hence I think that it's very likely that this is a Windows-specific driver issue.
Would Lenovo happen to have a driver update in the works? Alternatively, I will be thankful for any suggestions about possible resolution of this problem.

skn2011 wrote:
My Macbook Pro notbook 13.3" does not detect external display throught it's mini display port to HDMI connector when connected to Sony Bravia 32" LCD TV.Can anyone help me get the answer as i tried reading everywhere on internet and none does not seems to work.Please help me out guys.
Are you using the Apple adaptor or a 3rd party

My ipod touch 4g will not connect to tv, will not display picture. keep getting a message saying this accessory is not supported by ipod touch, what do ido to make this work and get rid of the message i keep getting?

My ipod touch 4g 5.0.1 will not connect to tv, will not display picture. Also keep getting a message sayin this accesory is not supported with ipod touch. How do i get this to work and stop getting this message? Please help.

- What cable re you using? Digitasl, VGA, composit, componet and who made it?
- TV out only works with apps that support it. It does not morror the iPod's screen
- Have tired another TV or other display?

T510 not connecting to apple 30' display through mini dock

I am having some difficulties connecting my T510 (NVS 3100m) though my thinkpad mini dock plus series 3 (4338). I am using dvi cable.
So far, the only resolution i am capable of is 1280x800.... instead of 2560x1600.
Any suggestions?
If possible, i would rather not get the display port/ DVI adapter.
thx
Europa
Solved!
Go to Solution.

Make sure you are using a dual dvi cable and not an older single version. You can usually tell by the amount of pins which are missing in the connector
A dual link cable will have all of the pins included, while a single link digital will be missing 2 rows, and an analog only cable will have even fewer.
I would also make sure that the dock supports dual link as well..
WHAT ARE SINGLE AND DUAL LINKS ?
The Digital formats are available in DVI-D Single-Link and Dual-Link as well as DVI-I Single-Link and Dual-Link format connectors. These DVI cables send information using a digital information format called TMDS (transition minimized differential signaling). Single link cables use one TMDS 165Mhz transmitter, while dual links use two. The dual link DVI pins effectively double the power of transmission and provide an increase of speed and signal quality; i.e. a DVI single link 60-Hz LCD can display a resolution of 1920 x 1200, while a DVI dual link can display a resolution of 2560 x 1600.
Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

Hi, my computer is not detecting any display, i'd been having this problem since i connected my computer to a tv, the tv burned up, and after that my port doesn't detect anything at all?? Was that the problem can I fix it.I have the lion 10.7.5.

Hi, my computer is not detecting any display, i'd been having this problem since i connected my computer to a tv, the tv burned up, and after that my port doesn't detect anything at all?? Was that the problem can I fix it.I have the lion 10.7.5. Dont know if I changed settings or something.

Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

Calc Manager displays "Could not connect to dimension server" 11.1.2.1

11.1.2.1 EPMA
Opening Calc Manager and expanding Planning displays this error message:
Could not connect to Dimension Server.
Please make sure that the required services are started.
I logged onto the foundation servers and restarted the following services (in this order):
EPMA_Server
Hys9EPMAWebTier
Calc Manager (on respective servers)
The problem still persists. Any ideas on how to resolve this?
Edited by: Metatron on Sep 17, 2012 7:32 AM

After restarting the services I started digging in the logs and I found 2 errors in the application log. These errors only occurred on one of the two foundation(dimension) servers (the other server has no errors in the application logs regarding this):
1:
[EPMA Server Startup] FATAL An error occurred during initialization of the Dimension Server Engine: Violation of PRIMARY KEY constraint 'PK_PropMbrArr'. Cannot insert duplicate key in object 'dbo.DS_Property_Member_Array'.
The statement has been terminated..System.Data.SqlClient.SqlException: Violation of PRIMARY KEY constraint 'PK_PropMbrArr'. Cannot insert duplicate key in object 'dbo.DS_Property_Member_Array'.
The statement has been terminated.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Hyperion.DataAccessLayerCore.DALCommand.Execute()
at Hyperion.DataAccessLayerCore.BaseWriteCommand`1.Execute(Boolean CanWrite)
at Hyperion.DataAccessLayerCore.InsertCommand`1.Execute(Boolean CanWrite)
at Hyperion.DataAccessLayerCore.BaseWriteCommand`1.Execute(Boolean CanWrite, T instance)
at Hyperion.DataAccessLayerCore.GenericDAO.Insert[T](T instance)
at Hyperion.DimensionServer.DAO.DimensionPropertyManagerDAO.InsertDimensionMemberArrayPropertyItem(PropertyMemberArrayRecord row)
at Hyperion.DimensionServer.PropertyManager.UpdateDimensionMemberArrayProperty(Int32 applicationID, DimensionMember member, MemberArrayProperty property)
at Hyperion.DimensionServer.PropertyManager.UpdateRelationshipArrayProperty(Int32 applicationID, RelationshipMember member, MemberArrayProperty property)
at Hyperion.DimensionServer.RelationshipMember.InternalUpdateArrayProperties(Int32 applicationID, IEnumerable`1 properties)
at Hyperion.DimensionServer.RelationshipMember.UpdateArrayProperties(Int32 applicationID, ICollection`1 memberProperties)
at Hyperion.DimensionServer.DimensionMember.UpdateArrayProperties(Int32 applicationID, ICollection`1 memberProperties)
at Hyperion.DimensionServer.ProductRegistration.UpdateMemberArrayProp(String propertyName, RelationshipMember member, Object target, Application app)
at Hyperion.DimensionServer.ProductRegistration.ParseValidationAssignments(XPathNavigator nav)
at Hyperion.DimensionServer.ProductRegistration.ProcessRegistration()
at Hyperion.DimensionServer.Library.Load()
at Hyperion.DimensionServer.Global.Initialize(ISessionManager sessionMgr, Guid systemSessionID, String sqlConnectionString)
2:
[EPMA Server Startup] ERROR Exception occurred in the DAL. Error Message: 'Violation of PRIMARY KEY constraint 'PK_PropMbrArr'. Cannot insert duplicate key in object 'dbo.DS_Property_Member_Array'.
The statement has been terminated.'. SQL command or stored proc:
INSERT INTO DS_Property_Member_Array (
i_application_id,
i_dimension_id,
i_library_id,
i_member_id,
i_prop_def_dimension_id,
i_prop_def_member_id,
i_ref_dimension_id,
i_ref_member_id,
c_value
VALUES (
@p_ApplicationID,
@p_DimensionID,
@p_LibraryID,
@p_MemberID,
@p_PropDefDimensionID,
@p_PropDefMemberID,
@p_RefDimensionID,
@p_RefMemberID,
@p_Value
Params:
p_ApplicationID = 1, p_DimensionID = 4, p_LibraryID = 1, p_MemberID = 177, p_PropDefDimensionID = 1, p_PropDefMemberID = 72, p_RefDimensionID = 6, p_RefMemberID = 281, p_Value = <null>
System.Data.SqlClient.SqlException: Violation of PRIMARY KEY constraint 'PK_PropMbrArr'. Cannot insert duplicate key in object 'dbo.DS_Property_Member_Array'.
The statement has been terminated.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Hyperion.DataAccessLayerCore.DALCommand.Execute()

IPod connected & now constant Do not disconnect on Display

I recently connected my iPod with Color Display to my Mac, iTunes did not immediately boot up nor did the iPod icon appear on the desktop. I manually started iTunes and ITunes began its synching routine and the "Do not Disconnect" message appeared on the iPod Display. When iTunes said the Sync was complete, the Do not disconnect message never reverted to the Main Menu. I ejected the iPod and the Do Not Disconnect message is still on the Display. I can not turn my iPod off, Disconnecting and reconnecting my iPod to the computer does not change the display status. I would just like to get it back to normal working status.
Can anyone offer recommendations as to what I can do?

iPod ran ow on battery power. iPod automatically shut down. When plugged in, iTunes performed a Synchronization and iPod started to re-vharge its battery

IPad 1 is recognized by iTunes running on Windows XP but will not sync (new problem, used to work fine). The iPad and all its contents displayed but warning box says the iPad is not connected. Tried soft reboot. All software versions current.

iPad 1 connects to iTunes and displays in the left column. All elements on iPad displayed. However, it will not sync. Displays message that the iPad is not connected. This is a new issue. Used to work fine. All iTines and iPad software up to date. Ran HELP diagnotsic in iTunes with iPad connected - no issues noted. Attempted soft reboot of iPad. No help.

Issue hopefully resolved. Required Apple store to delete all info from iPad and reinstall operating system. Had to reload all data, but it seems to be working fine. Cause unknown.

I have using I phone 5c after connected with my HP elite book 6930p laptop, Automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.

I am using I phone 5c after connected with my HP elite book 6930p laptop, (Installed Window 7 32 bit). automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.
I did install itunes and update also. but the above problem still same.
Kindly give me solution of it. awaiting.
Regards
Abbas Kader

try it with another computer to check if it shows up
if so
uninstall all apple software
reboot
use regedit to search and remove all itunes keys
reboot
resinstall apple software
if non of that helps then try another cable
if that don't help could be your phones connector is damaged

HT4623 i am having a problem with my iphone 4s. it is not displaying its volume bar in music or anywhere when not connected to earphones. kindly help me with its volume settings.

i am having a problem with my iphone 4s. it is not displaying its volume bar in music or anywhere when not connected to earphones. kindly help me with its volume settings.

Have you tried the restart/reset/restore troubleshooting path? That would be the best initial set of steps to take, particularly in a situation like this.

When iTunes is not connected to internet it keeps on displaying a message that "iTunes couldn't connect to the store" whenever i open it. How to stop this message being displayed?

When iTunes is not connected to internet it keeps on displaying a message that "iTunes couldn't connect to the store" whenever i open it. How to stop this message being displayed?

guyz... do look into this...

Not connecting to display

Similar Messages

Maybe you are looking for