Not connecting to network

My iPhone 4s just stopped connecting to my home network today. It was working fine this morning. I have many WiFi devices, OS and other. One of the other working devices is the same type and model 4s. I rest the router settings and passwords, I reset the iPhone network settings, and it is still the only device in the house that is not able to connect to the network. Please help.
os 7.1.2(11D257)

If the recommendations in this article don't solve the problem, take it to the Genius Bar to have it evaluated for a hardware problem (make an appointment first). Best of luck.
iOS: Wi-Fi settings grayed out or dim

Similar Messages

  • I had no problem with my IPad 3 connecting to my wi-fi but for some reason lately it tell me can not connect to network.  I reset both my wifi and my ipad and I still get the same error.

    I've had my IPad 3 for awhile and had no problems with it.  The other day I went to connect to my wi-fi and it told me could not connect to network.  It recognizes my wi-fi but won't connect.  I have shut off my wi-fi and still the same problem.  Today I reset my ipad back to factory and when I get to the wifi setup I still get unable to join the network.  What is wrong

    Dont use a password to connect the ipad and try if unable to join happens try another network. After that it is a repair. Now most likely it is the password on router. typically you access your router with http://192.168.1.1/ BUT it may be different if you changed it or your router uses different one.

  • HP Color LaserJet CP1520nw will not connect to network (time out repeatedly)

    My HP LaserJet CP1520nw won't connet to my wireless router upon installation, no many how many times I've been asked to connect it to the computer via a USB printer cable.   I uninstalled and reinstalled all software, and each time I try to set it up for wireless connectivity by connecting my computer and the printer via a USB printer cable, it gets to 99%  installed on the progress bar and sits there until it times out.  I suspect one of the follow but am open to other ideas from those more knowledgeable:
    1.  Is the printer locked onto some old, initial configuration from a previous wireless network that needs to be purged of addresses, etc. before it can accept the new ones?
    2.  Could my WPA WPA2 PSK AES encrytion be messing it up?  Are the modern firmware and updates designed to accept these ?  I never have gotten to a screen where it asks for my encyption key or even a WPS pass phrase.  What to do if so?
    3.  Could Church Lady be correct and that it is Satan preventing the installation?  If so, what icons does he use to watch out for and will my Norton anti-virus and malware quarantine him to Hell automatically or does it require manual enforcement?

    Hi @Marvalina1968,
    Welcome to the HP Forums!
    I noticed that your HP Color LaserJet CP1520nw will not connect to network with Windows 7. I am sorry to hear this, but happy to help!
    First to answer your questions:
    It is possible the printer could be locked to an old configuration and needs to be reset.
    I don't think your WPA WPA2 PSK AES encrytion could be messing it up, unless you got some really strange characters in your password.
    Your Norton antivirus, could possible be causing the installation to fail.
    Please take a look through the following guides:
    'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
    Printer Does Not Maintain Wireless Connection.
    If the guides do not resolve the issue, please try the following:
    Uninstall the software. Uninstalling the Printer Software.
    Clean boot the computer. How to perform a clean boot in Windows.
    Disable any antivirus programs. Disable antivirus software.
    Disable any firewall programs. Turn Windows Firewall on or off.
    Re-install the software. HP LaserJet Full Feature Software and Driver.
    Hope this solves your problem, and have a good day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Not connected to network although it is connected wirelessly

    I have a HP Photosmart 7510 All in one printer. I can print from computers wirelessly but it says not connected to network when i try to use web services, facebook, or efax. I cant even run an update because if no internet connection. i have tried rebooting routers and printer. Nothing else has issues with internet with router. I have also tried typing in the Ip address in the web address bar but when i go to networking it is asking for admin user name and password that i do not know. How can i fix this issue?  I have downloaded drivers and software from HP site also.

    Hi @Sniper187
    Welcome to the HP Support Forums. I gather that you have encountered some difficulties with your Photosmart 7510 printer.
    I have included a link to a post by @PrintApper regarding the Printables titled HP Apps Service Retired on several printers.  It has the information regarding the apps on your printer. I have also  included a link to a post by @PrintApper regarding eFax titled eFax users - please read.  It has the information regarding the eFax feature.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Just recently updated an iPhone 4 to iOS 7. Having trouble activating iMessage. It will not connect to network. Any help ?? All connections are fine other apple devices are working

    Just recently updated an iPhone 4 to iOS 7. Having trouble activating iMessage. It will not connect to network. Any help ?? All connections are fine other apple devices are working

    Hey X300X,
    Thanks for the question. I understand you are experiencing issues with iMessages. The following article may help to resolve your issue:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

  • I'm trying to watch a moive and then BAM it say cant not connect to network but as you can see my internets fine., I'm trying to watch a moive and then BAM it say cant not connect to network but as you can see my internets fine.

    I'm trying to watch a moive and then BAM it say cant not connect to network but as you can see my internets fine., I'm trying to watch a moive and then BAM it say cant not connect to network but as you can see my internets fine.

    Hi,
    How do you connect the printer to the XP machine ? If USB, you need to make that machine as a Print server. Please try this:
       http://techtips.salon.com/make-windows-computer-pr​int-server-11914.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Galaxy Nexus Not connecting to network

    Good Evening,
    I just received a replacement phone for Galaxy Nexus. The phone is not connecting to network. I am able to connect to wifi but unable to make calls or send texts since having the phone activated last night.  When I was in the store last night I was able to receive and send a few text messages but since then haven't been able to communicate using my phone. I don't know if this an issue with the service in the area North Attleboro, MA or with my phone. Been on hold for 20 minutes with customer service.
    Thank you,
    James
    Private info removed as required by the Terms of Service.
    Message was edited by: Admin Moderator

        Thanks for the additional information jdeguilio!
    No issues noted for North Attleboro. Please reprogram and test. To reprogram please pull the SIM card for one minute, then reinsert and power off/on. I see that you are using the same SIM from previous phone and this should not be a problem; however, if you accidentally touched the golden portion of the SIM card that could cause some issues. If reprogramming does not improve, try a new SIM card. You can get one for free at any Verizon Wireless http://bit.ly/3SdsA corporate store.
    AntonioC_VZW
    Follow us on Twitter at www.twitter.com/VZWSupport

  • My ipad2 will not connect to network since last iOs update.

    My iPad 2 will not connect to network since last iOs5 update.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Error: EPrint not Enabled, Also: Printer not connected to Network

    I have been using this printer and EFax until recently when EFax wont work.   I am connected to Network, I can use printer for printing from laptop, IPAD and Iphone.   Have good connection. When I attempt to send EFAX, I get "Your printer is not connected to Network"   Then I am told to enable EPrint,  IT IS enabled.    Printer is great, EFax wont work.  

    This reply may be late for this user, but it might be helpful for any current users.
    I managed to change the modem's IP address to match that of the printer. In my case the printer worked fine wirelessly until I moved to a new place and installed a new modem. Here is what I did to solve the problem:
    1. At the printer, click on the wireless button, wireless settings, print network configuration page. This will print a page with the printer's IP address (in my case: 192.168.0.13)
    2. I accessed my modem via the internet browser, typing 192.168.1.1 (this is one of the default addresses (192.168.0.1 is also common). Default user and password is admin (usually). There I changed the modem's IP address to 192.168.0.1 and the range to start at 192.168.0.13 (my printer's IP address).
    3. I saved the settings (the modem will reboot and you will be offline, it may take some 20 seconds before the modem is visible again).
    4. Reconnect to the modem and check if internet is still working. Then try to install the printer again.
    This worked for me after I read several other postings.
    Good luck!

  • Imessage wont connect using my apple id says can not connect check network conection and my network connection is fine what do i do

    having trouble with imessage since i updated to the ios7 cant get it to connect to imessage when i use my apple id says can not connect check network connection and my network connection is fine does anyone know what to do to fix this

    i have the same problem but i didnt update

  • I recently changed my wifi password at home and now my iphone will not connect.  It will not ask me for a password just says will not connect to network.  Advice on how to get iphone to ask network password for wifi?

    I recently changed my wifi password at home and now my iphone will not connect.  It will not ask me for a password just says will not connect to network.  Advice on how to get iphone to ask network password for wifi?

    First, try tapping on the network in the Wi-Fi settings and then tap "forget this network". Then reselect the network in the main Wi-Fi settings screen and see if will then ask for a password. If not, try resetting the Network Settings in the General -> Reset section and then reconnecting to your W-iFi.
    Hope this helps.

  • My firefox page is not connecting to network and also its not displaying the troubleshoot problems option?

    my firefox page is not connecting to network and also its not displaying the troubleshoot problem option?

    At the very least, I recommend you restart your router, (your internet box).
    More detail on your problem is needed - are you in a submarine? On the moon? On a tropical island?
    You can help yourself by providing as much info as you can about your present situation - what kind of router do you have? Have you moved it? DId you update it?  Did you do anything to change your setup, and if you did, what?

  • Mac is not connecting to network systems with names it's only connecting with the IP address why?

    Mac is not connecting to network systems with names.
    It's only connecting with the IP address why?

    It sounds like a problem with the domain name server. Be sure you are using the correct DNS in System Preferences > Network, and if you are make sure it is functioning correctly.
    Best of luck.

  • Macbook not connecting to network

    My Macbook's internet won't work all of a sudden. I was home for the weekend and it was working fine on my home network.  This morning, I woke it from sleep and although airport says it's connected  to my dorm's network, the net won't connect (no Safari, Firefox, no Mail, etc). I've tried everything I know; restart, delete the network and re-add it, try another account... Still nothing.
    The network is working fine, I can access it on my iPad and iPod.
    Any thoughts?

    Imaan Hisham wrote:
    and also taken from "About NVRAM and PRAM":
    "OS X does not store network settings in NVRAM / PRAM. If you are troubleshooting a network issue, resetting it will not help."
    This is if you are troubleshooting a network issue.  If your computer simply would not connect to networks, it may not be a setting that is screwed up, it may just need a reset to cause it to start using the wireless again, it doesn't hurt to try and at least some information was given to you to help.  Nobody said it would fix anything, they simply stated TRY...

  • ATV not connecting to network

    Help please....
    aTV will not connect to network. I have reconfigured but no changes, previously no problems - sync'd movie and when attempting to play received msg that not authorised to play. Since then could not connect.
    Have tried all sources of help, save going to apple store - forum last resort.

    Same thing here. I upgraded to a Dual-Band Time Capsule. I have a MacBook Air which hops on perfectly to the -n network, but Apple TV refuses to see it. It CAN connect to the -g network (which my iPhone uses as well). When i set the ATV to stream, and then go to shared music, it just freezes. "run diagnostics" says everything is working fine. I even did a factory restore and then upgraded the software. same thing.
    makes me think it's the ATV, not the network or the Time Capsule, since everything else is working ok. Any ideas? i'm at the point where i'll probably just buy a new ATV to test whether i have a faulty unit.

  • P2035n not connecting to network, it show on it, but try to connected and it fail

    p2035n not connecting to network, it show on it, but try to connected and it fail. it was working for a day then  cant connect to it no, even after reinstalled. it looks like the printer is shut out.

    I had the same problem with my iphone 4S. I paired it to a Bluetooth device (Bose Sound speaker) and accidently "forgot" the device. After that I couldn´t pair it again, not could I connect it to my Time Capsule, it said the password was incorrect. However, both devices worked perfectly with another iphone and my mac. I tried resetting network settings, the phone, the wifi connection, but nothing worked. Eventually I ended up restoring my iphone, backed it up to the latest backup, and BINGO! everything works!!! Good luck!!!

Maybe you are looking for

  • Creating ALV reports using OOP concept

    After creating many reports i found out that 90% of the coding in a report is copy paste i.e. only 10% of coding effort is required which includes     creating the custom data types and internal table variables  ...     populating the data     creati

  • DPR_EVENTS

    Hi can anyone does work on this BADi? here is my thread in abap objects.. Class structure help me out... points will be rewarded regards Giri

  • ASA5585 - which rack mount?

    Sadly dissappointed in the documentation...   I would think that one of these parts would be the rack kit used when eliminating the slide rails to fit the 5585 in a narrow rack as described in the hardware installation guide ( http://www.cisco.com/c/

  • How to add infoObject at query level

    Dear Friends, How to add or import Info Object or Charecterstics directly at query level. Please note that this perticular Info Object is not available in Info Cube. Please help me. It is very urgent. Regards

  • View of Txn MM02

    Hello all, I wanted to change the view of BasicData1 in MM02 .Under Basicdata1 tab in  Dimensions/EANS I want fields  length , height and width of the material , is it possible to change the screen ..if so how ? Regards Edited by: BrightSide on Jun 9