Not connecting to wi-fi, Not connecting to wi-fi

Hi,
Further to my question, stateing that my iphone was not connecting to any wi-fi, i have discovered that my iphone does connect to my wi-fi but this is only when i am stood within a couple of meters from my router! the phone connects and works through wi-fi fine, once a walk away and for instance sit at the other side of the room, it dissconnects and returns to 3G! now my partner and friends who have iphones and are connected to my wi-fi, have no problem connecting to my wi-fi anywhere in my house! now to me this is strange, as mine is the only phone that does not connect unless basically stood right next to the router. Anyone any ideas how i could solve this????? i myself, is under the impression it could be a fault within the phone and might have to be sent away, which i dont really want to do!!! Many thanks
Phil

I had a similar issue and fixed by going into preferences, network and under WIFI checked the box "ask to join new networks". This should not normally make a difference but it fixed my issue.

Similar Messages

USB Device for IPOD not recognized by Windows, whether ipod connected or no

During the past few days I have received a pop up error message from (I would think) Windows that the USB device is not recognized. I have the USB plug for the ipod connected (as always)but the ipod isn't even connected. It keeps popping up like every few seconds that the usb device is not recognized.
When I attach the ipod itself, the ipod is recognizing it because it powers up. But, it took 10 times just to get the ipod to recognize through itunes. It updated, then immediately upon completion, windows again starting giving repeated error messages that the usb device wasn't recognized.
I have downloaded the newest itunes but I had it on my system for 4 days with no problems whatsoever. I don't think that's it. No other system changes.
I've deleted my temp files and cache. Also did a "disk clean up" and "defrag." It's still doing it.
Any suggestions?

I'm having the same problem. Ever since I upgraded to version 7, iTunes & my PC no longer recognise my iPod, and it therefore won't sync.
It's not the USB port (other devices work in it), I rebooted my iPod and re-installed iTunes, I've tried stopping and starting the iPod Service (but can't see my iPod in My Computer). When I run the Diagnostics it says iPod connection failed. I've even bought a new USB cable but that doesn't work either.
This is driving me up the wall. Is there a glitch with iTunes 7?
Can anyone help me out?? Thanks
Windows XP

KABA connection issue - program not registered

I am trying to troubleshoot a connection error between SAP and KABA. I have the RFC created in SAP and when I test the connection I get a program not registered. The KABA "amsproc" service on the KABA side has been restarted, we have occasionally received a password locked message in the SAP system log after restarting the KABA service (I believe this means SAP and KABA are communicating). We have since reset the password, but we can not successfully test the RFC and when attempting to send IDOC's out we get the program not registered error. Is there something on the SAP side that needs to be done to register the program or is starting the service on the KABA side going to register the program with SAP? Any assistance would be appreciated.

Hi,
In Central Management Console ie, Admin application of BOE, you need to configure the BW system. Use the below URL,
http://<serverhostname>:<port>/CmcApp
After logging in Select the Authentication and SAP as authentication type. Regarding how to configure, follow the configuration steps mentioned in the below article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f
Once you import the roles with the above configuration, the user with which you are validating the RFC connection will be imported in the BOE.
Now, verify the RFC in the BW system.
Regards,
Noor.

AiO Remote Ink Levels etc not accessible with USB connection

My printer prints and scans just fine...except that it ran out of ink after about 15 pages. I'm trying to view the ink levels, but everything in the HP AiO Remote says it's not supported with the USB connection. There's no other way to connect my printer. I need to view the ink levels and be able to put in new ink, but I can't because the software isn't working right. Help?

Hi @HnnhSmth95,
I see by your post that you are unable to view the ink levels by a USB connection. I can help you with this, but I will need some more information.
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Excite PRO 3G connection not work after Android v4.3 update

Hello,
I live in Italy and on last Sunday (january 26th) my Excite PRO tablet (model AT10LE-A-10H) got the Android version 4.3.201121220.35.
After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
My sim card is ok. I used this sim card before the system update and I didn't get any problem with Android 4.2.2.
Please help me.
Thank you

>After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service".
Go to the mobile network settings and search again for the 3G network.
I had similar problem with my Android Smartphone and my o2 provider
I started new search, then I chosen the O2 again and then I could solve the problem.
In case this does not work for you, recommend you to reset the tablet back to default (factory settings)

I have an apple iphone 4 that I want to download audio books from my library onto it. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks

I have an apple iphone 4 that I want to download audio books from my library onto. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks

Yes it is done through iTunes. The iPhone will never show up in Finder as a device. The following is general information on iTunes sync: http://support.apple.com/kb/HT1386 and the following is a previous discussion where the post by Andreas Junge helped others that had a problem syncing audiobooks: https://discussions.apple.com/message/20052732#20052732

New Officejet 4500 will not connect wirelessly

We just got a new Officejet 4500 that I began to set up last night. First I followed the recommended setup path for setting it up wirelessly: USB connection to my MacBook Pro, install the software, use the setup wizard, etc. It chugged away for a while and eventually I got back a bunch of errors "Failed to retrieve IP".
I have a wireless hub provided by my ISP which I have set up with WEP (no Mac filtering, no special firewall within the home network). After googling around for a while I decided to switch to WPA personal. I got my MacBook working with that, then tried the printer wireless setup wizard again. No go, same errors.
Next I tried setting it up (still with WPA) directly on the printer using it's menus. This also didn't work. The printer printed out a Wireless Network Test Report which looked like this in the Diagnostics Summary:
Wireless On: PASS
Wireless Working: PASS
Network Name (SSID) Found: PASS
Security: PASS
Printer Settings Consistent with Wireless Router Settings: PASS
No Filtering: FAIL
Connected: Not Run
Signal Strength: Very Low
Other networks detected matching your network name (SSID): No
Downlink count: 2
Channel: Not Run
I also switch back to WEP and reran the setup via the printer menus, and failed the same way and got the exact same diagnostic summary.
What now?

Hello-
If you have a Officejet 4500 G510g , the printer is not wireless. You can use an ehternet cable and do a network install. That way any device that is wireless can use it as long as your on the same network.
The OJ 4500 G510n is wireless.
Specs :
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01954185&tmp_task=prodinfoCategory&cc=us&dlc=en...
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
Donald

How to connect my ipad to TV is vga adapter is not working

Hi i am trying to connect my ipad via vga to my beovision 9. All is correctly installed but its not working. My Beovision service centre advises to purchase an hdmi adapter but this apparently not available. Any suggestions What to do next ??

HI and welcome....
This thread may offer some ideas for you.
http://discussions.apple.com/thread.jspa?messageID=11579515&#11579515
Carolyn

Not detecting tv display when connected with Apple Mini-DVI to Video Adapte

I am connecting my macbook to my older tv using a Apple Mini-DVI to Video Adapter to an RCA (yellow video prong) and then into the tv. The red and white audio prongs hang loose, not hooked into anything on both ends. When I go into Displays there is no option for mirroring displays. I hit 'detect displays' but nothing happens. The Apple Mini-DVI to Video Adapter is brand new, just ordered it from apple. And I use the RCA cord all the time with other machines into my tv and it works fine.
Any help is really appreciated. Thanks!

Which generation MacBook do you have because at some point Apple dropped support for that adapter. Here is a link to a list of Apple adapters and compatible computer models:
http://support.apple.com/kb/HT3235

How can I connect my 3gen apple tv with HDMI to my bush LCD32TV022HD which does not have an HDMI port but does have 1)S-Video I/P, 2)Video I/P, 3) L

How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
This does not have an HDMI port but does have:-
1) S-Video I/P,
2) Video I/P,
3) Audio Input (Left & Right)
4) Audio In jack (for VGA and DVI source)
5) DVI input
6) VGA input

Welcome to the Apple community.
The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
You may well wish to make sure that the DVI connection works before spending any money on a DAC..

How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
Check your MacBook Pro model year against the list in this Apple tech note:
About Mini DisplayPort to HDMI adapters
Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

Laptop-TV: HOW TO CONNECT T400 with the TV (not HD)?

Hello guys,
I would like to connect my three years old Lenovo T400 ( with VGA) with the TV (I will use the same connection with the DVD player...with my PC was OK because I used a video card ...well...is impossible with the laptop...)
No ideea what to do...what to buy...how to do it...if it is possible with my laptop...
I checked on the Lenovo site..Docks&Port replicators for T400...only 2 options with DVI...not on the TV...and here... http://www-307.ibm.com/pc/support/site.wss/MIGR-70321.html ...and...someting about display port...not on my laptop...
There are other solutions regarding TV?
Thanks in advance for any help.
Have a nice day!
Solved!
Go to Solution.

no...the T400 has only the VGA output...I bought a cable which has on the first end ...VGA input and on the other end ...the standards jacks (red,yellow,white)...was not working at all...also I found something here...http://www.shopiogear.com/store/iogear/en_CA/pd/productID.196475400/categoryId.42447600...is with an external DVI at the end...will check now if there are some cable with internal DVI and on the other end composite jacks...thanks for your help.

TV Apple TV MacBook Air:How to connect my computer's monitor and TV as multiple monitors (NOT mirroring)

I have an insignia TV, an apple TV I just bought less than a month ago, and a Macbook Air (mountain Lion) and a MacBook pro (mountain lion).
I am able to connectboth of my computers with the TV to mirror my screen/monitor, but I have not been able to figure out how to use the apple TV to use my TV as a second monitor, like I was able to do with my HDMI cable.
when I bought the Apple TV the person who I talked to at the store told me I would be able to do it, but I havent been able to do it through system preferences and the options for display only show as mirroring through Airplay. I dislike mirroring because while I play something on my computer (or somebody else does) I'd like to still be able to use my computer for browsing or doing homework.
Please help me find a way in which I can make my TV as a second monitor tu my computer without having to have an HDMI cord across the room. I have a puppy and I have had problems with that. That is actually the reason why I considered buying the Apple TV device.
NOTE: In case you know a way to connect my TV to my Macs I have a time capsule and my TV has a DVI, two HDMI, and a USB ports.
thank you!
Lydia

Morning jotref,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
About AirPlay Mirroring in OS X Mountain Lion
http://support.apple.com/kb/ht5404
Best of luck,
Mario

Does the later 2009 MacBook support the Apple DVI to Video Adapter (s-video). I want to connect it to an old tv which does not support HDMI. Any suggestions?

I have a late 2009 MacBook which I want to connect to an old LG tv. The tv does not support HDMI it only has the (red, while, and yellow) ports. Sorry I dunno the exact name for it.
So I was thinking of using the Apple Mini DVI to Video Adapter (s-video), link below...
http://store.apple.com/Catalog/dk/Images/M9319_screen.jpg
But I'm afraid that the MacBook might not support the adapter.
Can anyone give me a solution for this? Is there an alternative way of doing this? I'm kinda new to apple display adapters.

The Late 2009 model 6,1 has a Mini DisplayPort not the Mini-DVI. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When the System Profiler comes up check the Model Identifier.
Composite is the name for the red, white and yellow RCA plugs on your TV or red, white and S-Video plugs. If you want to use the Composite input on your TV there’s no Mini DisplayPort to Composite. You’ll have to get a Mini DisplayPort to VGA adapter http://www.amazon.com/s/ref=nb_sb_ss_i_1_19?url=search-alias%3Delectronics&field -keywords=mini+displayport+to+vga&sprefix=mini+Displayport+to and a VGA Adapter to TV S-Video RCA Out Cable for PC Video. http://www.amazon.com/VGA-Adapter-S-Video-Cable-Video/dp/B000Y7T5UU/ref=sr_1_7?s =electronics&ie=UTF8&qid=1316369974&sr=1-7
Only the Yellow plug or the S-Video plug for video will work. For sound you'll also need audio cables to the TV using a 3.5mm stereo headphone jack to RCA sound plugs. You attach it from the headphone jack of your MacBook to the appropriate input plugs on your TV http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13#/ref=nb_sb_ss_i_2_19?url=search-alias%3Daps&field-keywords=macboo k+audio+cable&sprefix=macbook+audio+cable&rh=i%3Aaps%2Ck%3Amacbook+audio+cable

10g Enterprise Manager is not able to connect to the database instance

I am running a Oracle 10g database in Solaris 10 server. When i am trying to connect to the enterprise manager it says Enterprise Manager is not able to connect to the database instance.
The database instance is open,the listener is up and the agent connection also says that it succeeded.
The server houses two 10g databases and the EM was working properly till yesterday. Kindly Help.
Thanks in advance.
Ram

Hi,
The EM is started and if i give emctl status dbconsole
-bash-3.00$ emctl status dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
http://gladiator:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running
Logs are generated in directory /db8/ora10gr2/product/10.2.0/Db_4/gladiator_TROY/sysman/log
it says that the EM is running. But when i am trying to access the URL it is in IE it says Page cannot be displayed what could be the problem for this???
Thanks in advance.
Ram

What do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet

what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network

My 2nd gen works fine with WPA2 and AES encryption.
You may need to go back and start over. Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router.

Not connecting to wi-fi, Not connecting to wi-fi

Similar Messages

Maybe you are looking for