Not consistent DB after upgrading SB1 2005 - 2007

Hello!
After try to uprade one of the company DB, a message appears:
'DB is not consistent. For more info check SB1 Log'
Checking the log l find a message:
u2018General Error CompanyStatus Value in CINF is not valid'
Could you please help me to solve this incosistency, cause we strongly need upgrade SB1 to 2007.
Thank you very much.

Hi Abel,
I knew the error. It is similar with one of our client's database. It gets this error when upgrading. if you do not trust me, I will send the screen shot of the error. The patch level is the same with your database patch level.
Two solutions I suggest are :
1. Upgrade to the latest patch levels i.e. 46 and then 48. After upgrade to the latest patch level of B1 2005A then upgrade the version from 2005A to 2007A.
2. Submit a ticket to SAP Support if no. 1 still fails.
I did not do 2nd solution since after upgrade to PL46 of 2005A and then upgrade the version to 2007A, it is succeed.
Rgds,
http://tech.groups.yahoo.com/group/SBO_Knowledge_Village/

Similar Messages

After upgrading Exchange Server 2007 to SP3 with update rollup 13, OWA not working

Hi,
We have just installed Service Pack 3 and update rollup 13 on our Exchange Server 2007, but unfortunately our OWA has gone inaccessible.
PROBLEM- The following error comes up when we try to access OWA :
Exception
Exception type: Microsoft.Exchange.Clients.Owa.Core.OwaInvalidConfigurationException
Exception message: Object reference not set to an instance
of an object.
Call stack
Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.CreateAndLoadConfigurationManager()
Microsoft.Exchange.Clients.Owa.Core.Globals.InitializeApplication()
Microsoft.Exchange.Clients.Owa.Core.Global.ExecuteApplicationStart(Object sender, EventArgs e)
Inner Exception
Exception type: System.NullReferenceException
Exception message: Object reference not set to an instance
of an object.
Call stack
Microsoft.Exchange.Clients.Owa.Core.Configuration.CheckPublicFolders(ADSystemConfigurationSession session, ADObjectId[] pfdbIds, Boolean& allLegacy, Boolean& allLater)
Microsoft.Exchange.Clients.Owa.Core.Configuration..ctor(ADSystemConfigurationSession session, String virtualDirectory, String webSiteName, ADObjectId distinguishedName, Boolean isPhoneticSupportEnabled)
Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.LoadConfiguration()
Microsoft.Exchange.Clients.Owa.Core.OwaConfigurationManager.CreateAndLoadConfigurationManager()
ACTION TAKEN SO FAR :
1. Removed OWA virtual directories and recreated them again.
2. IIS has been reset.
3. Restarted the HUB/CAS server.
4. Created public folder database.
Even after doing all these activities, owa is still inaccessible. Please help.
Regards,
Ankur

Hi Ankur,
From your description, you can't access to OWA after upgrading Exchange server 2007 to SP3 rollup 13. Firstly, please locate to C:\ExchangeSetupLogs and make sure that it is a successful installation. If not, this issue often occurs.
If it is a successful upgrading, please follow the steps below for troubleshooting.
1. Open IIS Manager, click Default Web Site -> Authentication, make sure that Anonymous Authentication and Windows Authentication are enabled.
2. Click Default Web Site -> SSL Settings, check "Require SSL" and click Ignore.
3. Click Default Web Site -> HTTP Redirect, check Redirect (enter your
https://URL), check "Only redirect" box and Status code Found 302.
4. Expand Server Configuration -> Client Access ->double click owa ->Authentication tab. Check the Basic Authentication and check the Use forms-based authentication button Logon Format: Domain\user name.
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support

Problems with EXCELSIUS 2008 after upgrading MS-Office 2007 to SP2 ??

Hi Community,
has anyone experienced how EXCELSIUS 2008 works after upgrading MS-Office 2007 to the new SP2 ??
(including "2007 MS Office Suite Service Pack2 (SP2)" and "MS Office Compatibility Pack Service Pack 2 (SP2)" and "Security Updates for MS Office System 2007 (KB969618)" and "Update for 2007 MS Office System (KB967642)")
We're going to upgrade our PCs and need to know about any possible trouble/problems with our mission critical applications (and EXCELSIUS was identified as one of them
Thanks in advance ...
Peter

I'm not sure if MS Office 2007 SP2 will actually cause any problem, but according to the supported platform list for Xcelsius 2008 SP1, MS Office 2007 SP2 is not listed (Office 2007 is).
Other Tools
=============
Office      (Excel, PowerPoint, Outlook, Word)
Windows Office 2003
Windows Office 2003 SP1
Windows Office 2003 SP2
Windows Office XP SP3
Windows Office 2007
Fix packs typically do not include additional platform support, so I believe that 2007 SP2 is still not supported as of FP3. I'm pretty sure though that Office 2007 SP2 will be supported in the very near future...

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

Wifi is not working properly after upgrading 7.1.1 onmy i4s

Dear Apple
i realy appriciate on your work ..right now i am suffreing from a problem that one i mentioned in subject .sometime my wifi is working good and sometime it shos dead to me ..but now its not working well after upgrading my phone on 7.1.1....
its my humble request please find a solution and provide me as soon as possble..
my totally work on wifi .
and sometime it goes hang in setting when i come on setting folder and clicked on wifi its get hang and also showing wifi is not availabe..please provide me best solution
Thanx & Regards
Sam
+91-92555-04628

settings - general - reset - reset network settings.

Elements 11 is not running anymore after upgrading my Mac to Mountain Lion

Elements 11 is not running anymore after upgrading my Mac to Mountain Lion

PSE11 does work OK with Mountain Lion but you need to delete the saved prefs and application state.
Quit Elements.
Launch Finder and click on Go (hold down the optn key) and click on Library when it appears in the list below Home.
Delete the following files from the Preferences folder:
com.adobe.PhotoshopElements.plist
Adobe Photoshop Elements 11 Paths
Adobe Photoshop Elements 11 Settings
Delete this file from the Saved Application State folder:
com.adobe.PhotoshopElements.savedState

HT201412 My text messages go to my ipad but not my iphone after upgrading to ios7.0.2, does anyone know a fix

My text messages go to my ipad but not my iphone after upgrading to ios7.0.2, does anyone know a fix

They are not text messages, they are iMessages.
Turn on iMessage on the iPhone.

HT1688 My iphone 5 does not ring anymore after upgrading to ios 7.0.2

My iphone 5 does not ring anymore after upgrading to ios 7.0.2. It did not happen right away, but maybe 2 weeks ago. I tried turning the "do not disturb" on and add allow everyone to call as well as turning it off but it only vibrates when calls come in. I also turned my phone off and it still only vibrates when calls and messages come in.

I found another feed and said there is a silent button next to volume bar. That was the problem.

Contact addresses not showing up after upgrading to ios 7

Contact addresses not showing up after upgrading to ios 7

Contact addresses not showing up after upgrading to ios 7

Hi, my iphone could not be activated after upgrade it from IOS4 to IOS6, it shows that is due to activation server is unavailable and no sim card in the iphone. Anyone can help me please?

Hi, my iphone could not be activated after upgrade it from IOS4 to IOS6, it shows that is due to activation server is unavailable and no sim card in the iphone. Anyone can help me please?

It is 99% hacked/jailbroken iPhone to use a different carrier than intended. You have to put the sim from the original carrier or ask them to unlock the iPhone. We as well as Apple cannot help you with this.

Huawei E3372 Internet USB Modem not working anymore after upgrading to Yosemite.

Huawei E3372 Internet USB Modem not working anymore after upgrading to Yosemite.

Thanks for your information.
It will help many users that have huawei E3372 with same problem.

Blackberry z10 did not switch ON after upgrading to 10.3.1 os

i upgraded to my z10 to 10.3 os after upgrading none of my applications were responding...after 2 days the phone shut downs because of low battery ...after charging the phone it doesn't switch ON it stucks on finalizing device setup....and it also heating up while charging....plz help

Duplicate:http://supportforums.blackberry.com/t5/BlackBerry-Z10/blackberry-z10-did-not-switch-ON-after-upgrading-to-10-3-1-os/m-p/3114716#nobanner

IdM 8.1 New Labels are not getting displayed after upgrading from 7.1

We have recently upgraded IdM 7.1 to IdM 8.1 and after upgrading the New Labels as New Navigation Menu's in Admin panel are not getting resolved and
Appearing following way
UI_APPR_XML_PROVISIONER_EMPTY_TABLE
UI_APPR_JAVA_LIST_PROVISIONING_REQUESTS_LABEL
We have checked these labels are there under WPMessages_en.properties file (under idmcommon.jar) but still they are not getting reflected.
Any help on this will be appreciated.

May be your location credentials out of sync.
Un-register and re-register the locations
1)Right click the location in the Control Center manager and select Unregister
2)Right click the location in the Control Center manager and select Register and enter the appropriate credentials.

Texts are not showing up after upgrading to version 11

Could someone help me with why some of my texts are not show up on my Flash project? Before the upgrade, everything is fine. However, after upgrading to version 11, my texts are disappearing.
Before (version 10.3.183.7...)
After (version 11.0.1.152...)
The texts in the boxes will disappear, when I hover mouse cursor over it. Those boxes with texts in them are created with an external AS file, and the texts are dynamicaly changed/put in with an external XML file. There is a mask on the boxes, show only 4 at a time.
Demo: www.ethanslin.com/portfolioWorks/flashWorks/demo/
You will see the changes with Flash player version 11, and everything working fine with older versions.
I use iMacs with Snow Leopard and Lion, and this happens on all of the browsers with Flash Player version 11.01.152. I also tested on Windows 7, and it is still happening. Is this a Flash Player bug or something changed that I am not aware of? Is there a work around for this?

This is a known issue and we have a fix for this in our next release. Thanks for posting.

USB 2.0 not functioning properly after upgrading to 3.10.3-1 kernel

After upgrading to the 3.10.3-1 kernel USB 2.0 is not working anymore on my ASrock ION330 nettop.
I just did a system upgrade (including a kernel upgrade to 3.10.5-1), but the problem remains...
Here's the relevant messages that I extracted with journalctl -b
Aug 07 09:59:11 alcyone kernel: ACPI: bus type USB registered
Aug 07 09:59:11 alcyone kernel: usbcore: registered new interface driver usbfs
Aug 07 09:59:11 alcyone kernel: usbcore: registered new interface driver hub
Aug 07 09:59:11 alcyone kernel: usbcore: registered new device driver usb
Aug 07 09:59:11 alcyone kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Aug 07 09:59:11 alcyone kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Aug 07 09:59:11 alcyone kernel: ehci-pci: EHCI PCI platform driver
Aug 07 09:59:11 alcyone kernel: ohci_hcd 0000:00:04.0: setting latency timer to 64
Aug 07 09:59:11 alcyone kernel: ohci_hcd 0000:00:04.0: OHCI Host Controller
Aug 07 09:59:11 alcyone kernel: ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1
Aug 07 09:59:11 alcyone kernel: ohci_hcd 0000:00:04.0: irq 16, io mem 0xfae7f000
Aug 07 09:59:11 alcyone kernel: hub 1-0:1.0: USB hub found
Aug 07 09:59:11 alcyone kernel: hub 1-0:1.0: 6 ports detected
Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: setting latency timer to 64
Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: EHCI Host Controller
Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 2
Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: debug port 1
Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: cache line size of 64 is not supported
Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: irq 18, io mem 0xfae7ec00
Aug 07 09:59:11 alcyone kernel: ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
Aug 07 09:59:11 alcyone kernel: hub 2-0:1.0: USB hub found
Aug 07 09:59:11 alcyone kernel: hub 2-0:1.0: 6 ports detected
Aug 07 09:59:11 alcyone kernel: hub 1-0:1.0: USB hub found
Aug 07 09:59:11 alcyone kernel: hub 1-0:1.0: 6 ports detected
Aug 07 09:59:11 alcyone kernel: usb 2-2: new high-speed USB device number 3 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-2: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-2: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-2: new high-speed USB device number 4 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-2: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-2: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-2: new high-speed USB device number 5 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-2: device not accepting address 5, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-2: new high-speed USB device number 6 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-2: device not accepting address 6, error -71
Aug 07 09:59:11 alcyone kernel: hub 2-0:1.0: unable to enumerate USB device on port 2
Aug 07 09:59:11 alcyone kernel: usb 2-3: new high-speed USB device number 7 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-3: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-3: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-3: new high-speed USB device number 8 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-3: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-3: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-3: new high-speed USB device number 9 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-3: device not accepting address 9, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-3: new high-speed USB device number 10 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-3: device not accepting address 10, error -71
Aug 07 09:59:11 alcyone kernel: hub 2-0:1.0: unable to enumerate USB device on port 3
Aug 07 09:59:11 alcyone kernel: usb 2-5: new high-speed USB device number 12 using ehci-pci
Aug 07 09:59:11 alcyone kernel: usb 2-5: device descriptor read/64, error -71
Aug 07 09:59:11 alcyone kernel: usb 2-5: device descriptor read/64, error -71
Aug 07 09:59:12 alcyone kernel: usb 2-5: new high-speed USB device number 13 using ehci-pci
Aug 07 09:59:12 alcyone kernel: usb 2-5: device descriptor read/64, error -71
Aug 07 09:59:12 alcyone kernel: usb 2-5: device descriptor read/64, error -71
Aug 07 09:59:12 alcyone kernel: usb 2-5: new high-speed USB device number 14 using ehci-pci
Aug 07 09:59:13 alcyone kernel: usb 2-5: device not accepting address 14, error -71
Aug 07 09:59:13 alcyone kernel: usb 2-5: device not accepting address 15, error -71
Aug 07 09:59:13 alcyone kernel: hub 2-0:1.0: unable to enumerate USB device on port 5
Aug 07 09:59:13 alcyone systemd[1]: Found device MCP79 Ethernet.
Aug 07 09:59:14 alcyone kernel: usb 1-1: new low-speed USB device number 2 using ohci_hcd
Aug 07 09:59:14 alcyone kernel: usb 1-4: new low-speed USB device number 3 using ohci_hcd
I'm glad that keyboard and mouse are working properly under USB 1.0, but neither my usb-parport printer nor my USB external hard drive are recognised any more :-(
Any ideas how to solve this?? (I'd prefer not to downgrade the kernel)
Last edited by zilverling (2013-08-07 14:28:36)

I've discovered it's not that USB 2.0 is not working. 3 out of 6 usb ports/busses seem to work properly. The other three seem totally dead. Obviously this was not the case under kernel 3.9.9-1. Downgrading to kernel 3.10.2 made no difference.
In practical terms this means that I can use my printer and access my external drive if I use the right port/bus. And I could probably work around the problem by plugging a USB hub in one of the working ports. But I would be happy to get rid of the error messages and have all 6 usb busses working as they did before...

Not consistent DB after upgrading SB1 2005 - 2007

Similar Messages

Maybe you are looking for