Not creating a safety backup
Hi.
Everytime I connect my iPod Touch, iTunes creates a safety backup of my data. Is it possible to disable this function ?
Probably - have you asked in the iTouch forums? I don't have one of those.
Similar Messages
-
Backups of the JVM.CONFIG file are not created
Backups of the JVM.CONFIG file are not created.
CF10 > Server Settings > Java and JVM in part says:
Backups of the jvm.config file are created when you hit the submit button. You can use this backup to restore from a critical change.
CF10 Help page indicates jvm.bak will be created:
http://help.adobe.com/en_US/ColdFusion/10.0/Admin/WSc3ff6d0ea77859461172e0811cbf3638e6-7ff c.html#WSc3ff6d0ea77859461172e0811cbf3638e6-7feb
Note Help indicates incorrectly JVM.CONFIG and BAK are in cf_root\runtime\bin where as JVM.CONFIG is located cf_root\instance\bin .
Thanks in advance, Carl.I must have not had enough coffee - JVM.BAK is created in where JVM.CONFIG is found. Pardon me.
-
Configurator 1.4 will not create a backup
Hi,
After struggling with many of the issues seen in other posts about configurator 1.4, I have hit upon another problem in that I simply cannot get it to create a new backup of any device, supervised or unsupervised.
I connect the device I want to backup - select devices - backup - I can see the clock icon for about 1 second, and then nothing. No backup has been created and no message either, basically nothing!
I am at a loss of what to try next.Just a quick update, I tried refreshing one of our newer iPads (iPad2 2nd gen) and then backing this one up and that was sucessful, I was then able to apply the new backup to the older iPad (iPad2 1st gen) so I do now have a backup I am able to apply again.
I have now run into an issue with the VPP though, and I still have to go through the initial set-up each time, so we are not out of the woods yet, but at least I have a working back-up! -
"Could not create a backup" Apple Configurator issue
I manage two carts of iPads (iOS 8.1.3) for my small junior high school. We use Apple configurator to supervise them and to Check out/Check in. I currently have four iPads that are in the setup assistant mode but the configurator still thinks they are checked out to students. When I attempt to check them in I get an error message that reads, "Could not create a backup. The device is showing the setup assistant" and when I show details it shows Code 4. Consequently, I cannot check out another device to these students as the Configurator thinks they have already been assigned a device.
Any ideas for me?
Thanks!The first thing I would check are permissions on directories that Apple Configurator read/writes. Maybe something there is preventing the backup.
Also, I remember reading somewhere that the code 4 error sometimes happens if you don't turn off "Find My iPad."
You could also try putting your iPad into recovery mode then unsupervising it in Configurator... then re-supervising it and try restoring the backup.
Hope this helps!
~Joe -
Creating a Bootable Backup in ML
I've been doing a bit a reading here, but I am still unsure of what I need to do. I recetnly upgraded from Snow Leopard to ML, but I want to create a bootable (mirror) backup on an external drive. I have always used SuperDuper to do this. Super Duper claims that it's latest version will create a bootable backup of ML. My backups in the past have been a bootable mirror of my drive and not the OS alone. Am I better off just redownloading ML and creating a bootable thumb drive of ML or would I be ok mirroring my drive with ML on it as a bootable backup. I hope this was clear...
My backup system has been like this:
Two 1tb bootable HDs (mirrored) that I swap out every week - the one not in use goes into a fire safe
One 2tb for TM
Cloud backup for important stuff.
Thank you!!The Lion Recovery Disk Assistant is an app. When you Open it, you have the opportunity to create a Recovery HD on a thumb drive for whichever OS X you're currently booted into. Just the Recovery HD and not the entire installation of OS X. The Recovery HD is created and hidden when you install OS X. SuperDuper! doesn't clone this. Here is some reading for the Recovery HD in Mountain Lion. It's the same for Lion. If the Recovery HD isn't on your system, you won't have the ability to boot into it for recovery purposes. So the Recovery Disk Assistant gives you this ability via a thumb drive.
The main difference between creating a Mountain Lion Recovery HD and Lion Recovery HD is the Reinstall Mac OS X option in the Utilities menu. The Lion Recovery HD ONLY downloads and installs Lion. The Mountain Lion Recovery HD ONLY downloads and installs Mountain Lion.
For example, if you create the thumb drive while in Mountain Lion, its Recovery HD is put on the thumb drive. And when you boot from that thumb drive, you get the Utilities menu of selections with the ability to download and install Mountain Lion. So, you can't use that thumb drive to download and install Lion. Hope this makes sense. -
Creating a bootable backup for upgrade to Lion
I've read some articles and watched some videos on how to create a disk of my drive from the disk utility. Is that a good way to create a bootable backup of my Mac Mini? I also want to have all my applications transferred over to Lion, though I know how to do that in the installation of the OS. But I want a fresh install over Snow Leopard and reinstall my apps from that bootable disk, again is that possible? If this can work, how can I know for sure if the backup works?
Spinland wrote:
Then what CSound1 said: use CCC to clone your drive to another disk for safekeeping, then install Lion and enjoy. All of your apps will still be there after the upgrade.
Have you checked to make sure your apps are Lion compatible? This guide can help you find out:
http://fairerplatform.com/2011/07/are-your-apps-lion-compatible-how-to-check/
Hi Spinland
That is not what I said exactly ......
1 Clone the SL (internal) to the external.
2 Boot from the external and install Lion on it.
3 Run Lion from the clone until you know it works (and you can identify any incompatible apps).
4 Clone the Lion external back to the internal.
5 You're done. -
MRP does not creates Shcedule Line
I have a valid scheduling agreement LPA in place. Scheduling Agreement is approved and released status.
I have source list also maintained for same scheduling agreement with long validity and MRP indicator as 2 - Create Schedule line automatically.
I am running MRP using following parameters in MD02.
Processing key NETCH Net Change in Total Horizon
Create purchase req. 3 Planned orders
Delivery schedules 3 Schedule lines
Create MRP list 1 MRP list
Planning mode 3 Delete and recreate planning data
Scheduling 2 Lead Time Scheduling and Capacity Planni
Even schedule line and other parameters maintained properly, MRP creates planned order and does not creates Schedule Line automatically. Material Master is maintained MRP Type PD, Lot Size as Replenishment to maximum stock level, Safety stock, No strategy and availability on.
What I am doing wrong? With same setting in other system it is working perfectly fine.
Any feedback appreciated.
Thanks
PPHi
Check whether the Agreement Open Target value .
If the target quantity was completed . so system will not create the Schedule lines for the material
2. If you mainatian the open period in the smk.
so system will create the planned order instead of schedule agreement. check -
ORA-01180: can not create datafile 1 during RMAN restore.
Hello,
I am trying to refresh one of our QA environments and I am getting this error message:
RMAN> run
2> {
3> allocate channel c1 device type disk;
4> allocate channel c2 device type disk;
5> restore database;
6> recover database;
7> }
allocated channel: c1
channel c1: SID=5 device type=DISK
allocated channel: c2
channel c2: SID=131 device type=DISK
Starting restore at 08-NOV-12
using channel ORA_DISK_1
creating datafile file number=1 name=+DATA1/alephpr/datafile/system.269.722874729
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/08/2012 16:27:40
ORA-01180: can not create datafile 1
ORA-01110: data file 1: '+DATA1/alephpr/datafile/system.269.722874729' I created a new database from scratch with the same name as is in Production, later on I will proceed to rename it to the right one. I started the steps for refreshing the PRD copy:
RMAN> shutdown immediate
using target database control file instead of recovery catalog
database dismounted
Oracle instance shut down
RMAN> startup nomount
connected to target database (not started)
Oracle instance started
Total System Global Area 534462464 bytes
Fixed Size 2228200 bytes
Variable Size 176160792 bytes
Database Buffers 348127232 bytes
Redo Buffers 7946240 bytes
RMAN> set dbid=3573460394
executing command: SET DBID
RMAN> restore controlfile from '/restorealeph/c-3573460394-20121106-01';
Starting restore at 08-NOV-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=130 device type=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:07
+output file name=+DATA1/alephpr/controlfile/current.260.798747585+
+output file name=+FLASH/alephpr/controlfile/current.276.798747585+
Finished restore at 08-NOV-12
RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1Once the control file is restored, I need to crosscheck, delete expired and catalog the backups at the new server:
RMAN> crosscheck backup;
Crosschecked 48 objects
RMAN> delete noprompt expired backup;
Deleted 48 EXPIRED objects
RMAN> list backup summary;
specification does not match any backup in the repositoryI need now to catalog the backups we transferred from Prod into the QA server's directory /restorealeph:
RMAN> catalog start with '/restorealeph/';
searching for all files that match the pattern /restorealeph/
List of Files Unknown to the Database
=====================================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
RMAN> list backup summary;
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
4097 B F A DISK 07-NOV-12 1 1 NO BACKUP_ALEPHPR.TUR_110712030000
4098 B A A DISK 07-NOV-12 1 1 NO BACKUP_ALEPHPR.TUR_110712030000
RMAN> list backup tag="BACKUP_ALEPHPR.TUR_110712030000";
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
4097 Full 178.04G DISK 00:00:00 07-NOV-12
BP Key: 4097 Status: AVAILABLE Compressed: NO Tag: BACKUP_ALEPHPR.TUR_110712030000
Piece Name: /restorealeph/9cnpm51u_1_1
List of Datafiles in backup set 4097
File LV Type Ckp SCN Ckp Time Name
1 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/system.269.722874729
2 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/sysaux.266.722874731
3 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs1.289.722874727
4 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs2.257.722874727
5 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/users.298.722874731
6 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/audit.299.723372305
7 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/case_datos.260.723372307
8 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/case_indices.261.723372307
9 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_hist.262.723372309
10 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_l.264.723372319
11 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_long.265.723372349
12 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_md.270.723372355
13 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_sm.271.723372369
14 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_xl.272.723372375
15 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_l.273.723372401
16 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_md.274.723372427
17 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_sm.275.723372455
18 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/index_xl.276.723372473
19 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/tools.278.723372501
26 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/data_sm.300.736088959
27 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_ptm5_meta.301.746385117
28 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_pstore.302.746385119
29 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/dev_disco_ptm5_cache.304.746385121
30 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs1.305.796391931
31 Full 6919879655786 07-NOV-12 +DATA1/alephpr/datafile/undotbs2.306.796392185
BS Key Size Device Type Elapsed Time Completion Time
4098 16.89G DISK 00:00:00 07-NOV-12
BP Key: 4098 Status: AVAILABLE Compressed: NO Tag: BACKUP_ALEPHPR.TUR_110712030000
Piece Name: /restorealeph/9enpm6lj_1_1
List of Archived Logs in backup set 4098
Thrd Seq Low SCN Low Time Next SCN Next Time
1 35722 6919870864350 06-NOV-12 6919871887697 06-NOV-12
1 35723 6919871887697 06-NOV-12 6919872372211 06-NOV-12
1 35724 6919872372211 06-NOV-12 6919872410158 06-NOV-12
1 35725 6919872410158 06-NOV-12 6919872447301 06-NOV-12
1 35726 6919872447301 06-NOV-12 6919872503332 06-NOV-12
1 35727 6919872503332 06-NOV-12 6919872551564 06-NOV-12
1 35728 6919872551564 06-NOV-12 6919872603881 06-NOV-12
1 35729 6919872603881 06-NOV-12 6919872655942 06-NOV-12
1 35730 6919872655942 06-NOV-12 6919872698722 06-NOV-12
1 35731 6919872698722 06-NOV-12 6919872741655 06-NOV-12
1 35732 6919872741655 06-NOV-12 6919872782284 06-NOV-12
1 35733 6919872782284 06-NOV-12 6919872872302 06-NOV-12
1 35734 6919872872302 06-NOV-12 6919872910206 06-NOV-12
1 35735 6919872910206 06-NOV-12 6919872945577 06-NOV-12
1 35736 6919872945577 06-NOV-12 6919872980056 06-NOV-12
1 35737 6919872980056 06-NOV-12 6919873013411 06-NOV-12
1 35738 6919873013411 06-NOV-12 6919873050761 06-NOV-12
1 35739 6919873050761 06-NOV-12 6919873084996 06-NOV-12
1 35740 6919873084996 06-NOV-12 6919873122049 06-NOV-12
1 35741 6919873122049 06-NOV-12 6919873521767 06-NOV-12
1 35742 6919873521767 06-NOV-12 6919873952773 06-NOV-12
1 35743 6919873952773 06-NOV-12 6919874258549 06-NOV-12
1 35744 6919874258549 06-NOV-12 6919874472213 06-NOV-12
1 35745 6919874472213 06-NOV-12 6919874744856 06-NOV-12
1 35746 6919874744856 06-NOV-12 6919875113086 06-NOV-12
1 35747 6919875113086 06-NOV-12 6919875733337 06-NOV-12
1 35748 6919875733337 06-NOV-12 6919876139061 06-NOV-12
1 35749 6919876139061 06-NOV-12 6919876707162 06-NOV-12
1 35750 6919876707162 06-NOV-12 6919877706313 06-NOV-12
1 35751 6919877706313 06-NOV-12 6919877919039 06-NOV-12
1 35752 6919877919039 06-NOV-12 6919878024429 06-NOV-12
1 35753 6919878024429 06-NOV-12 6919878107673 06-NOV-12
1 35754 6919878107673 06-NOV-12 6919878258511 06-NOV-12
1 35755 6919878258511 06-NOV-12 6919878308336 06-NOV-12
1 35756 6919878308336 06-NOV-12 6919878424419 06-NOV-12
1 35757 6919878424419 06-NOV-12 6919878488485 06-NOV-12
1 35758 6919878488485 06-NOV-12 6919878827092 06-NOV-12
1 35759 6919878827092 06-NOV-12 6919879350098 07-NOV-12
1 35760 6919879350098 07-NOV-12 6919879675556 07-NOV-12
2 35949 6919870864360 06-NOV-12 6919871494640 06-NOV-12
2 35950 6919871494640 06-NOV-12 6919871887487 06-NOV-12
2 35951 6919871887487 06-NOV-12 6919872410655 06-NOV-12
2 35952 6919872410655 06-NOV-12 6919872552468 06-NOV-12
2 35953 6919872552468 06-NOV-12 6919872698940 06-NOV-12
2 35954 6919872698940 06-NOV-12 6919872872690 06-NOV-12
2 35955 6919872872690 06-NOV-12 6919872980371 06-NOV-12
2 35956 6919872980371 06-NOV-12 6919873085902 06-NOV-12
2 35957 6919873085902 06-NOV-12 6919873569082 06-NOV-12
2 35958 6919873569082 06-NOV-12 6919873949096 06-NOV-12
2 35959 6919873949096 06-NOV-12 6919874404640 06-NOV-12
2 35960 6919874404640 06-NOV-12 6919875011814 06-NOV-12
2 35961 6919875011814 06-NOV-12 6919875631429 06-NOV-12
2 35962 6919875631429 06-NOV-12 6919876324885 06-NOV-12
2 35963 6919876324885 06-NOV-12 6919876363526 06-NOV-12
2 35964 6919876363526 06-NOV-12 6919876748508 06-NOV-12
2 35965 6919876748508 06-NOV-12 6919877741784 06-NOV-12
2 35966 6919877741784 06-NOV-12 6919878108943 06-NOV-12
2 35967 6919878108943 06-NOV-12 6919878424477 06-NOV-12
2 35968 6919878424477 06-NOV-12 6919879012111 06-NOV-12
2 35969 6919879012111 06-NOV-12 6919879260589 07-NOV-12
2 35970 6919879260589 07-NOV-12 6919879350086 07-NOV-12
2 35971 6919879350086 07-NOV-12 6919879464935 07-NOV-12
2 35972 6919879464935 07-NOV-12 6919879548399 07-NOV-12
2 35973 6919879548399 07-NOV-12 6919879675564 07-NOV-12
RMAN> list incarnation;
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 ALEPHPR 3573460394 PARENT 1 13-MAY-10
2 2 ALEPHPR 3573460394 PARENT 2229467 28-JUN-10
3 3 ALEPHPR 3573460394 CURRENT 6918261828355 26-SEP-12The ASM structure is created...
ASMCMD> lsdg
State Type Rebal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files Name
MOUNTED EXTERN N 512 4096 1048576 509282 507421 0 507421 0 N DATA1/
MOUNTED EXTERN N 512 4096 1048576 50641 42850 0 42850 0 N FLASH/
ASMCMD> cd DATA1/ALEPHPR/DATAFILE
ASMCMD> pwd
+DATA1/ALEPHPR/DATAFILEBoth source and target databases are 11.2.0.2 PSU 6 running on Linux x64. I cannot use RMAN Duplicate since there is no visibility among different environments (PROD - QA in this case).
Any idea?
Thanks
Martin
Edited by: martin.morono on Nov 8, 2012 11:19 AM
Edited by: martin.morono on Nov 8, 2012 11:49 AMThanks Levi,
I slightly modified your script to recatalog the backup pieces since they are note stored at the same location in PR and QA.
No luck. The error message is different but the result is the same... it keeps failing.
RMAN> run {
2> allocate channel c1 device type disk;
3> allocate channel c2 device type disk;
4> restore controlfile from '/restorealeph/c-3573460394-20121107-01';
5> startup mount;
6> catalog start with '/restorealeph/';
7> restore database from tag 'BACKUP_ALEPHPR.TUR_110712030000';
8> }
allocated channel: c1
channel c1: SID=191 device type=DISK
allocated channel: c2
channel c2: SID=131 device type=DISK
Starting restore at 09 NOV 2012 13:11:09
channel c2: skipped, AUTOBACKUP already found
channel c1: restoring control file
channel c1: restore complete, elapsed time: 00:00:15
output file name=+DATA1/alephpr/controlfile/current.260.798747585
output file name=+FLASH/alephpr/controlfile/current.276.798747585
Finished restore at 09 NOV 2012 13:11:24
database is already started
database mounted
Starting implicit crosscheck backup at 09 NOV 2012 13:11:31
Crosschecked 52 objects
Finished implicit crosscheck backup at 09 NOV 2012 13:11:39
Starting implicit crosscheck copy at 09 NOV 2012 13:11:39
Crosschecked 2 objects
Finished implicit crosscheck copy at 09 NOV 2012 13:11:40
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_2_seq_1.279.795017193
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_2_seq_34950.273.795014469
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_1.281.795017413
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_2.283.795017519
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_3.290.795018411
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_4.291.795018559
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_5.292.795018707
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_6.293.795018811
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_7.294.795018899
File Name: +flash/ALEPHPR/ARCHIVELOG/2012_09_26/thread_1_seq_8.295.795020509
File Name: +flash/ALEPHPR/CONTROLFILE/Current.268.798725123
searching for all files that match the pattern /restorealeph/
List of Files Unknown to the Database
=====================================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Do you really want to catalog the above files (enter YES or NO)? YEs
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /restorealeph/9cnpm51u_1_1
File Name: /restorealeph/9enpm6lj_1_1
File Name: /restorealeph/c-3573460394-20121107-00
File Name: /restorealeph/c-3573460394-20121107-01
File Name: /restorealeph/c-3573460394-20121106-01
Starting restore at 09 NOV 2012 13:11:48
released channel: c1
released channel: c2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/09/2012 13:11:48
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 31 found to restore
RMAN-06023: no backup or copy of datafile 30 found to restore
RMAN-06023: no backup or copy of datafile 29 found to restore
RMAN-06023: no backup or copy of datafile 28 found to restore
RMAN-06023: no backup or copy of datafile 27 found to restore
RMAN-06023: no backup or copy of datafile 26 found to restore
RMAN-06023: no backup or copy of datafile 19 found to restore
RMAN-06023: no backup or copy of datafile 18 found to restore
RMAN-06023: no backup or copy of datafile 17 found to restore
RMAN-06023: no backup or copy of datafile 16 found to restore
RMAN-06023: no backup or copy of datafile 15 found to restore
RMAN-06023: no backup or copy of datafile 14 found to restore
RMAN-06023: no backup or copy of datafile 13 found to restore
RMAN-06023: no backup or copy of datafile 12 found to restore
RMAN-06023: no backup or copy of datafile 11 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN>Just in case, I re-run this script including the crosscheck backup and the delete noprompt expired backups before restoring an the error messages were the same.
THanks again for your help.
Regards.
Martin
Edited by: martin.morono on Nov 9, 2012 7:21 AM -
How can I transfer my notes from an iTunes backup to iCloud?
I dropped my iPhone in water and now the screen won't work. I need some of my notes, but I couldn't back them up to iCloud before because I didn't have enough space. I recently deleted my iCloud backup so I could back up my phone at some later time but didn't get around to it. I was able to connect my iPhone to iTunes and back it up that way, but I have not been able to get that data to iCloud.
If the notes are now restored to your phone from your backup, you can only get them to iCloud by opening each note and copying and pasting the text into new notes created in the iCloud account.
-
Can I create a full backup on google drive by moving my user folders to Google Drive Folder?
Can I create a full backup on google drive? Google suggested I simply move my folders (Pictures, Music, Downloads, Documents, etc) into the google drive folder. But these seem to be automated files involved with Mac's organization... will this create problems for my computer? Ie. if I import new photos, or download music, will my computer know where to put it if its in google drive?
If this is a problem, how else could I possibly create a full backup of personal data on google drive (or any similar syncing service, for that matter). iCloud is prohibitively expensive, and programs like crash plan and carbonate run so slowly and bog down my computer so much that they are not worth it. Google drive seems simplest and most competitive in price, but I am worried about moving my folders.
Help?Google Drive also installs a client--a google drive folder on my hard drive that is programmed to sync changes automatically to the cloud--that allows me to drag and drop. I suppose my original concern was about dragging files from my hard drive (such as "pictures" that would contain my iPhoto library, etc) into it. Would that mess up Mac's internal organizational system? If I drag and drop my pictures folder, music folder, etc. into the google drive client folder in Finder, will those applications still function correctly? Will my mac still be able to figure out where to put photos I import from my camera, etc?
I am only as tech savvy as I have to be to survive professionally as a traveling teacher, so I am looking for something pretty straightforward that will free up some of my brain waves for other activities, rather than remembering which folders I have made changes in and need to sync. -
I used DIsk Utility to create a startup backup clone for the first time yesterday. I cloned it to my internal drive on my Mac. I let it run all night and when I woke up this morning it showed it as failed (not enough disk space). Now when I boot up my Mac, it showed a warning at the login screen (not enough disk space at startup). I do not have an external hard drive (which is why I chose to backup internally). Do I need to purchase one?
It still allows me to log in. When I open Finder and look at my internal drive, it shows less than 100.00 MB space available. I tried deleting a bunch of old files and stripped needless apps. However, it keeps showing my computer as having less than 100 MB of storage.
Is there a way to find the failed clone backup and delete it? I tried looking in Spotlight for the backup clone (I named it 4-21-14.dmg). I cannot find the file. I was hoping to backup my files so I can install OS Mavericks on my computer (mid-2010 Macbook Pro), but I do not have enough free space.I solved the problem by deleting over 100 gb of files and apps. I would have rather not gone that route, but having less than 100 MB of storage is an unacceptable headache to deal with. Now I have to decide on whether to try again with the backup internally route or risk it and download/install Mavericks.
-
RMAN-05556: not all datafiles have backups that can be recovered to SCN
Oracle 11.2.0.2 SE-One
Oracle Linux 5.6 x86-64
Weekly refresh of a test db from prod, using rman DUPLICATE DATABASE, failed with “RMAN-05556: not all datafiles have backups that can be recovered to SCN”
Background Summary:
Weekly inc 0 backup of production starts on Sunday at 0100, normally completes around 1050. Includes backups of archivelogs
Another backup of just archivelogs runs on Sunday at 1200, normally completes NLT 1201.
On the test server, the refresh job starts on Sunday at 1325. In the past this script used a set until time \"to_date('`date +%Y-%m-%d` 11:55:00','YYYY-MM-DD hh24:mi:ss')\"; -- hard-coded for ‘today at 11:55’.
For a variety of reasons I decided to replace this semi-hard coding of the UNTIL with a value determined by querying the rman catalog, getting the completion time of the inc 0 backup. This tested out just fine in my vbox lab, even when I deliberately drove some updates and log switches during the period the backup was running. But the first time to go live I got the above reported error.
Details:
The key part of the inc 0 backup is this (run from a shell script)
export BACKUP_LOC=/u01/backup/dbprod
$ORACLE_HOME/bin/rman target=/ catalog rman/***@rmcat<<EOF
configure backup optimization on;
configure default device type to disk;
configure retention policy to recovery window of 2 days;
crosscheck backup;
crosscheck archivelog all;
delete noprompt force obsolete;
delete noprompt force expired backup;
delete noprompt force expired archivelog all;
configure controlfile autobackup on;
configure controlfile autobackup format for device type disk to '$BACKUP_LOC/%d_%F_ctl.backup';
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '$BACKUP_LOC/%U.rman' MAXPIECESIZE 4096 M;
sql "alter system archive log current";
show all;
backup as compressed backupset archivelog all delete all input format "$BACKUP_LOC/%U.alog";
backup as compressed backupset incremental level 0 database tag tag_dbprod;
sql "alter system archive log current";
backup as compressed backupset archivelog all delete all input format "$BACKUP_LOC/%U.alog";
list recoverable backup;
EOF
The archivelog-only backup (runs at noon) looks like this:
export BACKUP_LOC=/u01/backup/dbprod
$ORACLE_HOME/bin/rman target=/ catalog rman/***@rmcat<<EOF
configure backup optimization on;
configure default device type to disk;
configure retention policy to recovery window of 2 days;
crosscheck backup;
crosscheck archivelog all;
delete noprompt force obsolete;
delete noprompt force expired backup;
delete noprompt force expired archivelog all;
configure controlfile autobackup on;
configure controlfile autobackup format for device type disk to '$BACKUP_LOC/%d_%F_ctl.backup';
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '$BACKUP_LOC/%U.rman' MAXPIECESIZE 4096 M;
sql "alter system archive log current";
show all;
backup as compressed backupset archivelog all delete all input format "$BACKUP_LOC/%U.alog";
list recoverable backup;
EOF
And the original refresh looked like this:
>> a step to ftp the backups from the prod server to the test server, and some other housekeeping <<, then
cd /backup/dbtest
echo "connect catalog rman/***@rmcat" > /backup/dbtest/dbtest_refresh.rman
echo "connect target sys/*******@dbprod" >> /backup/dbtest/dbtest_refresh.rman
echo "connect auxiliary /" >> /backup/dbtest/dbtest_refresh.rman
echo "run {" >> /backup/dbtest/dbtest_refresh.rman
echo "set until time \"to_date('`date +%Y-%m-%d` 11:55:00','YYYY-MM-DD hh24:mi:ss')\";" >> /backup/dbtest/dbtest_refresh.rman
echo "duplicate target database to DBTEST;" >> /backup/dbtest/dbtest_refresh.rman
echo "}" >> /backup/dbtest/dbtest_refresh.rman
So, my mod to the refresh was
bkup_point=`sqlplus -s rman/***@rmcat <<EOF1
set echo off verify off feedback off head off pages 0 trimsp on
select to_char(max(completion_time),'yyyy-mm-dd hh24:mi:ss')
from rc_backup_set_details
where db_name='DBPROD'
and backup_type='D'
and incremental_level=0
exit
EOF1`
cd /backup/dbtest
echo "connect catalog rman/***@rmcat" > /backup/dbtest/dbtest_refresh.rman
echo "connect target sys/*******@dbprod" >> /backup/dbtest/dbtest_refresh.rman
echo "connect auxiliary /" >> /backup/dbtest/dbtest_refresh.rman
echo "run {" >> /backup/dbtest/dbtest_refresh.rman
echo "set until time \"to_date('${bkup_point}','YYYY-MM-DD hh24:mi:ss')\";" >> /backup/dbtest/dbtest_refresh.rman
echo "duplicate target database to DBTEST;" >> /backup/dbtest/dbtest_refresh.rman
echo "}" >> /backup/dbtest/dbtest_refresh.rman
Now the fun begins.
First, an echo in the refresh script confirmed the ‘bkup_point’:
=======================================================
We will restore to 2013-08-25 10:41:38
=======================================================
Internally, rman reset the ‘until’ as follows:
executing command: SET until clause
Starting Duplicate Db at 25-Aug-2013 15:35:44
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=162 device type=DISK
contents of Memory Script:
set until scn 45633141350;
Examining the result of LIST BACKUP (the last step of all of my rman scripts) the full backup shows this:
BS Key Type LV Size Device Type Elapsed Time Completion Time
5506664 Full 61.89M DISK 00:00:03 25-Aug-2013 02:11:32
BP Key: 5506678 Status: AVAILABLE Compressed: NO Tag: TAG20130825T021129
Piece Name: /u01/backup/dbprod/DBPROD_c-3960114099-20130825-00_ctl.backup
SPFILE Included: Modification time: 24-Aug-2013 22:33:08
SPFILE db_unique_name: DBPROD
Control File Included: Ckp SCN: 45628880455 Ckp time: 25-Aug-2013 02:11:29
BS Key Type LV Size Device Type Elapsed Time Completion Time
5507388 Incr 0 206.03G DISK 08:30:00 25-Aug-2013 10:41:30
List of Datafiles in backup set 5507388
File LV Type Ckp SCN Ckp Time Name
1 0 Incr 45628880495 25-Aug-2013 02:11:38 +SMALL/dbprod/datafile/system.258.713574775
>>>>>>>>> snip lengthy list <<<<<<<<<
74 0 Incr 45628880495 25-Aug-2013 02:11:38 +SMALL/dbprod/event_i2.dbf
Backup Set Copy #1 of backup set 5507388
Device Type Elapsed Time Completion Time Compressed Tag
DISK 08:30:00 25-Aug-2013 10:41:36 YES TAG_DBPROD
List of Backup Pieces for backup set 5507388 Copy #1
BP Key Pc# Status Piece Name
5507391 1 AVAILABLE /u01/backup/dbprod/eeoi55iq_1_1.rman
>>>>>>>>>>>>> snip lengthy list <<<<<<<<<<<
5507442 52 AVAILABLE /u01/backup/dbprod/eeoi55iq_52_1.rman
Notice the slight difference in time between what is reported in the LIST BACKUP and what was reported by my query to the catalog.
Continuing with the backup list, the second archivelog backup in the script generated six backupsets. The fifth set showed:
BS Key Size Device Type Elapsed Time Completion Time
5507687 650.19M DISK 00:02:18 25-Aug-2013 10:54:53
BP Key: 5507694 Status: AVAILABLE Compressed: YES Tag: TAG20130825T104156
Piece Name: /u01/backup/dbprod/ekoi643j_1_1.alog
List of Archived Logs in backup set 5507687
Thrd Seq Low SCN Low Time Next SCN Next Time
1 1338518 45632944587 25-Aug-2013 05:58:18 45632947563 25-Aug-2013 05:58:20
>>>>>>>>>>>>> snip lengthy list <<<<<<<<<<<
1 1338572 45633135750 25-Aug-2013 10:08:21 45633140240 25-Aug-2013 10:08:24
1 1338573 45633140240 25-Aug-2013 10:08:24 45633141350 25-Aug-2013 10:30:06
1 1338574 45633141350 25-Aug-2013 10:30:06 45633141705 25-Aug-2013 10:41:51
1 1338575 45633141705 25-Aug-2013 10:41:51 45633141725 25-Aug-2013 10:41:55
Notice the availability of the archivelogs including the referenced scn.
Investigation of the ftp portion of the refresh script confirmed that all backup pieces were copied from the prod server.
So what am I overlooking? Having reverted back to the original script to get the refresh completed,HemantKChitale wrote:
So, technically, you only need the database and archivelogs backed up by the database script and not the noon run of the archivelog backup.
backup as compressed backupset archivelog all delete all input format "$BACKUP_LOC/%U.alog";
backup as compressed backupset incremental level 0 database tag tag_dbprod;
sql "alter system archive log current";
backup as compressed backupset archivelog all delete all input format "$BACKUP_LOC/%U.alog";
Yet, why does backupset 5 of the noon archivelog backup show archivelogs from 10:30 to 10:40 if they had been deleted by the database backup script which has a delete input ? It is as if the database backup script did NOT delete the archivelogs and the noon run was the one to backup the archivelogs (again ?)
No, that is from the morning full backup. Note the 'Completion Time" of 25-Aug-2013 10:54:53
However, the error message seems to point to a datafile. Why would reverting the recovery point to 11:55 make a difference, I wonder.
As do I.
Also puzzling to me are the times associated with the completion of the backups. I don't recall ever having to scrutinize a backup listing this closely so I'm sure it's just a matter of filling in some gaps in my understanding, but I noticed this. The backup report (list backup;) shows this for the inc 0 backup:
BS Key Type LV Size
Device Type Elapsed Time Completion Time
5507388 Incr 0 206.03G
DISK
08:30:00
25-Aug-2013 10:41:30 ------- NOTE THE COMPLETION TIME ----
List of Datafiles in backup set 5507388
File LV Type Ckp SCN
Ckp Time
Name
1
0 Incr 45628880495 25-Aug-2013 02:11:38 +SMALL/dbprod/datafile/system.258.713574775
------ SNIP ------
74 0 Incr 45628880495 25-Aug-2013 02:11:38 +SMALL/dbprod/event_i2.dbf
Backup Set Copy #1 of backup set 5507388
Device Type Elapsed Time Completion Time
Compressed Tag
DISK
08:30:00
25-Aug-2013 10:41:36 YES
TAG_DBPROD ------- NOTE THE COMPLETION TIME ----
List of Backup Pieces for backup set 5507388 Copy #1
BP Key Pc# Status
Piece Name
5507391 1 AVAILABLE /u01/backup/dbprod/eeoi55iq_1_1.rman
------ SNIP ------
5507442 52 AVAILABLE /u01/backup/dbprod/eeoi55iq_52_1.rman
Then the autobackup of the control file immediatly following:
BS Key Type LV Size
Device Type Elapsed Time Completion Time
5507523 Full
61.89M
DISK
00:00:03
25-Aug-2013 10:41:47 ------- NOTE THE COMPLETION TIME ----
BP Key: 5507587 Status: AVAILABLE Compressed: NO Tag: TAG20130825T104144
Piece Name: /u01/backup/dbprod/DBPROD_c-3960114099-20130825-01_ctl.backup
SPFILE Included: Modification time: 25-Aug-2013 05:57:15
SPFILE db_unique_name: DBPROD
Control File Included: Ckp SCN: 45633141671 Ckp time: 25-Aug-2013 10:41:44
Then the archivelog backup immediately following (remember, this created a total of 5 backupset, I'm showing number 4)
BS Key Size
Device Type Elapsed Time Completion Time
5507687 650.19M
DISK
00:02:18
25-Aug-2013 10:54:53 ------- NOTE THE COMPLETION TIME ----
BP Key: 5507694 Status: AVAILABLE Compressed: YES Tag: TAG20130825T104156
Piece Name: /u01/backup/dbprod/ekoi643j_1_1.alog
List of Archived Logs in backup set 5507687
Thrd Seq
Low SCN
Low Time
Next SCN Next Time
1
1338518 45632944587 25-Aug-2013 05:58:18 45632947563 25-Aug-2013 05:58:20
------ SNIP ------
1
1338572 45633135750 25-Aug-2013 10:08:21 45633140240 25-Aug-2013 10:08:24
1
1338573 45633140240 25-Aug-2013 10:08:24 45633141350 25-Aug-2013 10:30:06
1
1338574 45633141350 25-Aug-2013 10:30:06 45633141705 25-Aug-2013 10:41:51
1
1338575 45633141705 25-Aug-2013 10:41:51 45633141725 25-Aug-2013 10:41:55
and the controlfile autobackup immediately following:
BS Key Type LV Size
Device Type Elapsed Time Completion Time
5507984 Full
61.89M
DISK
00:00:03
25-Aug-2013 10:55:07 ------- NOTE THE COMPLETION TIME ----
BP Key: 5508043 Status: AVAILABLE Compressed: NO Tag: TAG20130825T105504
Piece Name: /u01/backup/dbprod/DBPROD_c-3960114099-20130825-02_ctl.backup
SPFILE Included: Modification time: 25-Aug-2013 05:57:15
SPFILE db_unique_name: DBPROD
Control File Included: Ckp SCN: 45633142131 Ckp time: 25-Aug-2013 10:55:04
and yet, querying the rman catalog
SQL> select to_char(max(completion_time),'yyyy-mm-dd hh24:mi:ss')
2 from rc_backup_set_details
3 where db_name='DBPROD'
4 and backup_type='D'
5 and incremental_level=0
6 ;
TO_CHAR(MAX(COMPLET
2013-08-25 10:41:38
SQL>
which doesn't match (to the second) the completion time of either the full backup or the associated controlfile autobackp.
Hemant K Chitale
I hope this posts in a readable, understandable manner. I really struggeled with the 'enhanced editor', which I normally use. When I pasted in blocks from the rman report, it kept trying to make some sort of table structure out of it .... guess I'll have to follow that up with a question in the Community forum .... -
Create Full HD Backup to encrypted bootable external drive
I have used SuperDuper to copy my internal HD to a bootable external drive configured with a 300 GB partition. Now I want to go one step further by creating that same backup but this time I want my external data to be encrypted for added security. I do not care if the OS and Applications files are encrypted as long as I can encrypt my home folder.
1) Does SuperDuper have an encryption feature?
If yes, how do you activate it?
2) If not, can I accomplish what I want using a Macbook Pro utility e.g. Disk Utility and perhaps
turn on FileVault?
3) Can I simply just turn on FileVault encryption and use Finder to drag my internal HD to external?
If yes, will my external drive now be bootable still?
Thanks in advance.Turn on Filevault, then use SuperDuper.
-
DPM 2012 Install Fails, The Database was not Created ID 811
Hi.
I've tried installing DPM on a Standalone Server (SQL + DPM), and get the "Database was not Created" error. I initially tried DPM 2012 R2, and found that there is an issue with Disjoint Namespaces, so went to DPM 2012 SP1, but still getting
the same error.
The Install Account has full access rights (sysadmin) to the DPM SQL Instance, however cannot seem to get it right. The account using to do the install has full Enterprise admin, Domain Admin, Backup Operators & Administrators rights.
When opeining SQL Managemet studio, I can see the database has been created but the setup fails and requires me to revert.Here is the last few lines of the Install Log File, please help I always mark as answer.
2014-10-01 08:54:49 PM] Information : Configuration.DBConfigurator: Setting Read_Committed_SnapShot ON
[2014-10-01 08:54:49 PM] Information : Creating tables
[2014-10-01 08:54:49 PM] Information : Execute the SQL script
[2014-10-01 08:54:49 PM] Data : FileName = "D:\Program Files\Microsoft System Center 2012\DPM\SQL\100\Tools\Binn\SQLCMD.EXE"
[2014-10-01 08:54:49 PM] Data : Arguments = -b -E -d DPMDB_S_PRODBACKUP -i MiniSetupDBConfiguration.sql -r -S S-PRODBACKUP\SCDPM
[2014-10-01 08:54:49 PM] Data : Error code = 0
[2014-10-01 08:54:49 PM] Information : Adding DPM Server entry in tbl_AM_Server table
[2014-10-01 08:54:49 PM] Information : Preloading Microsoft.Internal.EnterpriseStorage.Dls.AgentManager.DB.InstalledAgents
[2014-10-01 08:54:49 PM] Information : Preloading Microsoft.Internal.EnterpriseStorage.Dls.EngineUICommon.DpmThreadPool
[2014-10-01 08:54:50 PM] Data : Database connection string = Integrated Security=SSPI;server=S-PRODBACKUP\SCDPM;Pooling=false;database=DPMDB_S_PRODBACKUP;Pooling=false
[2014-10-01 08:54:50 PM] Information : Grant execute permissions on dbo.prc_MOM_ProductionServer_Get to DPMDBReaders$S-PRODBACKUP
[2014-10-01 08:54:50 PM] Information : Grant execute permissions on dbo.prc_MOM_HeartBeat_Get to DPMDBReaders$S-PRODBACKUP
[2014-10-01 08:54:50 PM] Information : Configuration.DBConfigurator: Registering DPM category
[2014-10-01 08:54:50 PM] Information : Configuration.DBConfigurator: Adding DPM Category to GlobalSettings table
[2014-10-01 08:54:50 PM] Information : Configuration.DBConfigurator: Adding ConsiderOfflineMediaToCheckOffsiteReady to GlobalSettings table
[2014-10-01 08:54:50 PM] Information : Add job definitions
[2014-10-01 08:54:52 PM] Information : Creating schedules
[2014-10-01 08:55:00 PM] * Exception : => System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException (0x800706BE): The remote procedure call failed. (Exception
from HRESULT: 0x800706BE)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.Engine.CProxyUtils.HandleErrors(Int32 hr, tagSAFEARRAY* exceptionResult)
at Microsoft.Internal.EnterpriseStorage.Dls.Engine.SchedulerServicesProxy.Register(String scheduleXml)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterScheduleXml(String scheduleXml)
[2014-10-01 08:55:00 PM] * Exception : => The DPM database was not created.Use Add or Remove Programs in Control Panel to remove the DPM files and registry entries that were created during Setup. Verify that SQL Server is properly installed and that
it is running, and then run Setup again.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception ---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.DatabaseConfigurationException: exception ---> System.Reflection.TargetInvocationException:
Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException (0x800706BE): The remote procedure call failed. (Exception from HRESULT: 0x800706BE)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at Microsoft.Internal.EnterpriseStorage.Dls.Engine.CProxyUtils.HandleErrors(Int32 hr, tagSAFEARRAY* exceptionResult)
at Microsoft.Internal.EnterpriseStorage.Dls.Engine.SchedulerServicesProxy.Register(String scheduleXml)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterScheduleXml(String scheduleXml)
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterScheduleXml(String scheduleXml)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.RegisterSchedule(String scheduleXmlFile)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.PopulateDefaultScheduleDefinitionsInDatabase(DBConfigurationReader dbCfgReader)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Configuration.DBConfigurator.AddJobAndScheduleDefinitions()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.MiniSetupConfiguration.PopulateDB(Boolean upgrading, Boolean isRemoteDb, String sqlServerMachineName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.MachineSpecificConfiguration(Boolean existingDB, Boolean upgrading, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
*** Mojito error was: DatabaseCreateFailed; 0; None
--- End of inner exception stack trace ---
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.MachineSpecificConfiguration(Boolean existingDB, Boolean upgrading, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.Configure(Boolean existingDB, Boolean upgrading, String databaseLocation, String sqlServerMachineName, String instanceName, Boolean oemSetup)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.Configure()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallDpm()
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
*** Mojito error was: DatabaseCreateFailed; 0; None
[2014-10-01 08:55:02 PM] *** Error : The DPM database was not created.
Use Add or Remove Programs in Control Panel to remove the DPM files and registry entries that were created during Setup. Verify that SQL Server is properly installed and that it is running, and then run Setup again.
ID: 811
[2014-10-01 08:55:02 PM] Information : Data Protection Manager installation has failed. To return the server to its original state, you must uninstall Data Protection Manager by using Add or Remove Programs in Control Panel. This will remove all files and components
copied during installation.
For details, click the Error tab.
[2014-10-01 09:33:51 PM] Data : Error Code Web Link =
http://go.microsoft.com/fwlink/events.asp?ProdName=Microsoft System Center Data Protection Manager&ProdVer=4.1.3313.0&EvtID=811&EvtSrc=MSDPM&LCID=1033&P2wAppId=p2wMsdpmEEHi,
Check the SQL Agent account on the remote SQL server and make sure the user account syntax is in the form of UserName\DomainName and not UserName@DomainName - if it is change it.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights. -
A passcode was not created when we first set up my son's ipad mini 3 however the ipad is now locked for some reason and asking for a passcode. What do we do?
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.
Maybe you are looking for
-
Help please with FaceTime. My built in app seems to have disappeared.
-
Added new line and want to exchange phone...how to get replacement
We added a third line to our family plan. I chose a phone that my MIL did not care for so we followed instructions provided in the package and sent it back. Now I need to get a replacement and have no idea how. Every time I call customer service I ca
-
Dear Experts, Can you please tell me what is the significant of u201CKey figuresu201D in Maintenance order cost Tab. How the same is distinct from value categories and activity type. How can you make use of this key figures while generating in mainte
-
Assigning discount threshold to a position in org. model
Hello, I need to assign discount thresholds (as a percentage value) to a position in org. model to facilitate discount approval process for quotation. Can this be done by using the attributes section of the position? Please provide your inputs.
-
C-s links auto populated: causes fatal error
Hello I have had to manually create and import my map file for my project. This map file is locked. It has its own name. When I go into the map file editor and look at the project map editor, it is automatically creating some CSH links every time I f