NOT cross fade...just FADE OUT

I am having a little trouble getting just a fade into at the beginning and/or fade out at the end.
it keeps changing the length of the clip or radically changing the length of the fade.
also looks like it puts in an entire fadein/out on things that I just want to fade out or just fade in.
need some help here.
I have tried everything I can (messing with length..placement...start/stops) of the trans and maybe I just dont get it but I am not a novice to editing. this thing is frustrating.

Switch on the "Toggle Clips Overlay" button. (The zig zag button at the bottom left of the timeline window.
You can then use keyframes near the beginning and end of your video to drag the Opacity Line down to make a fade-in and a fade-out.

Similar Messages

Im going to go to apple to show my phone that my wi-fi wasnt working and now iv droped my phone and the hole screen came out, its not mashed it just came out, but work, so now im worried apple my wont take care of it

im going to go to apple to show my phone that my wi-fi wasnt working and now iv droped my phone and the hole screen came out, its not smashed it just came out, butstill works, so now im worried apple my wont take care of it, what will they do ?? it was a bran new phone

You are correct to worry. There is no way for Apple to know if the wifi problem was before or after the drop. If you have Apple Care +, you can get a replacement device for a deductible. If not, user damage is not covered under the warranty or regular Apple Care. You would need to see if they will repair the screen (at your cost), or if you would have to purchase an out of warranty replacement.

MBP Does not sleep it just runs out of battery and dies

I did a fresh install of Leopard yesterday and I have a BRAND NEW MBP Battery, I fully charged it and let it drain down, instead of the computer going to sleep, it just ran out of battery and died.
Is anybody else having this problem and if so, do you have a fix?
Thanks

Hi Again Daniel
Again, please excuse a suggestion that may come across as insulting, but I generally work on the premise that to assume is inviting problems... So...
In the sleep preferences system preferences pane, you have two sleep options (for a laptop anyway). One for battery and one for mains power. I suppose you have checked the setting in both areas...
I should also apologise for not suggesting that a PMU (or System Management Controller) reset is the most likely cure for your battery issues... It was rather late when I offered my previous suggestions.
Here's the link to the Apple page which describes the procedure:
http://docs.info.apple.com/article.html?artnum=303319
I hope this does the trick.
Regards
Tony

Help please (not blather): Fix/Disable CS3 palette fade-in/fade-out

My other thread got clogged with lots of insults and useless comments.
For those of you who have a problem with slow fade-in/out of CS3 palettes, I am asking for possible solutions to this problem, thanks.
I am not asking for misdirection, insults, suggestions to get a new machine, etc, thanks.
I am courteously asking for anyone with a practical solution, including hacking the binary or whatever, to stop the useless fade-in/out of palettes on CS3.
Thank you.

Okay, I switched my primary Scratch drive over to a different IDE internal disk volume with 23 GB free. (Then I quit & restarted PS)
I have 2GB (max) RAM on the dual G4. 67% of installed RAM is assigned to PS.
Having the other Separate IDE Disk as the Scratch volume made No difference in the fade-in speed.
I also tried stuffing a heavy QT encode into the system, which takes 80% of both CPUs when running. This does make a bit of difference, perhaps 0.5 secs overall.
Opening a large-ish document in PS ( 580 MB ) causes the fade-in to slow down a little bit, perhaps by 0.5 seconds slower.
With this large image, trying BOTH Raptor and IDE internal hard disks for Scratch, made No difference in fade-in time. So, no way is the fade-in slowness due to the Scratch disk setup.
Except for the video card, my sys looks pretty much like Ramon's. I have never enabled Dashboard (CPU hog), and Spotlight is disabled on my Sys and Scratch volumes (same disk, separate partitions).
One more bit of info: the Fade-In always looks like it takes only two steps, (1) 50% opaque over desktop, (2) 100% opaque and ready. 2nd monitor is 1600x1200 x 24bit via PCI video card.
I have perhaps 150 font families installed under 10.4.11 and use Unsanity's FontCard, but most of my work images do not include any fonts.
Unless it's the Fonts, or the Video card (soon to be tested), I don't know what else it could be.
New Info: (Don't know why I didn't try this earlier, too tired at 2:30am...) I moved all my palettes over to my main monitor (AGP slot, ATI 9000 Pro on 1920 x 1200 Apple Cinema Display)... The fade-in is much quicker there; around 1.5 seconds to fade the palettes in.
Again it happens in two steps of fade, just faster than on the 2nd monitor. This leads me to believe its the video card, and perhaps the new 9700 AGP will fix this problem...
Also, the fewer the number of palettes open, the faster the fade-in on the main monitor... Looks like a simple "too much graphics to build, paint & fade" to me...

I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yel

I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yellow line that graphs volume takes a sharp raise or dip at the beginning or end of the clip, but there is no change in volume when I play back. What am I doing wrong?

rickeyt
Thanks for the reply. Great news about the volume adjusts.
Now about those fades for the volume. How are you doing that?
1. Right click the Timeline video audio and select Fade and then
see the Fade options (I had a video with audio file, so I saw the choices as shown in the screenshot)
2. You can also create two volume keyframes at each end of the Timeline audio clip rubberband (orange line that goes horizontally across the middle of the audio clip). At the position of the Timeline Indicator, click the Add/Remove Keyframe icon, and then with the mouse cursor position the white dots (volume keyframes) to achieve the Fade In and Fade Out audio. In the screenshot below I have moved the Timeline Indicator so that you could better see the white dots (volume keyframes).
Please let us know if any of the above works for you with regard to the audio fades.
Thank you.
ATR

My image will not fade in our out

I have followed instructions to the letter (and know feel I understand Flash a bit better than I did afew days ago) however I cannot get an image to fade in or out.
I have attached a screen print. I have changed the properties on the image 9which I changed to a movie clip) on frame 1 and frame 55 to alpah 0%.
When I click on the frames, frame 1 to 15 appear blank, the remainder are the image @ 100% and frame 55 is blank.
Am I making a really obvious mistake?
I created motion tweens.
Many thanks to anyone who can help.
Helen

Thank you so much for your help, sorry about the wrong forum.
In the end I did exactly as the tutorial I watched said but instead of creating a motion tween I did it as a classic tween. This then seemed to work with none of the problems I had encountered before. I'm not sure why that would be?
Now all I need to work out is at frame 50 & 51 (and subsequent images) the image is 0% alpha which means it does fade to a complete blank, when in reality I would not really like this, it is a bit too obvious a changeover (my fps is set to 20). Otherwise I am really happy with it.
I'll try and work on this, unless you have any immediate advice, or I can post it on the correct forum?
Thnaks again for your help.

How do I adjust my titles so they don't fade in and out? I have hundreds of photos/videos on screen for a second or so each, for a year-long birthday video, and I need the dates in my titles to be steady rather than fading in and out spastically.

I have been working on a project since December of 2012 for my son's first birthday. Basically, it's a photo or quick video each day of his life so far. I used the "upper" title and made the titles not fade in and out, because that could give someone a seizure. The idea is a seamless title that ticks away each day. But in the new iMovie, it changed my settings, and I can't for the life of me find how to change them back.
Now, each date flashes in and out, in and out, in and out. Fractions of seconds go by. It's really distracting and annoying.
How do I get the titles to remain on screen and not fade in and out? I had it just how I wanted it, but now we're rapidly approaching my son's birthday, and the video is suddenly a mess.
How do I fix this?

I am working with the very same concept for my project and the auto fade in and out has messed everything up. If I hear or a fix I'll be sure to reply here to let you know!

I have used I tunes to download music with a paid I tunes card. I can no longer open the music store to download my music. When I do open the music store it fades in and out, preventing me from downloading music.

I can nolonge download music from I tunes, because the music store page fades in and out and will not remain permanent to allow me to download music with a pre-paid I tunes card.
Also, why is it you can only download music to an I-pod from one primary computer. Is there a method that will allow me to download music from a variety of computers.

it only happens for previous purchases - if you have a computer you can try to download your purchase history there and then just sync them to your device - http://support.apple.com/kb/ht2519 - http://support.apple.com/kb/ht1386.

How to edit i-tunes s.a. fade in, fade out, cut and save for burning CD ?

How to edit i-tunes, s.a. fade in fade out, cut and save for burning CD.
I was directed to this forum by i-tunes helpdesk. Can some give advise how I can process those additional features that are not available in i-tunes 8 ?
Thanks.
Kris.

Hi
iMovie'08 & 09 is not the best tools to do a DVD or a DiskImage (via iDVD) from.
You use iDVD to do the DiskImage - but that's when the movie is done.
You can't (at least I can't) do a diskimage first then put a movie into it.
The movie has to be encoded eg .mpeg2 and that's including the rest of the DVD structure too.
No body builds houses - roof first then the supporting walls to end with throwing
in a basement as a last action.
To do a Data-DVD (*not playable in a DVD-player*) is another story.
Just insert the DVD disk and when asked select format.
This makes a DVD-ROM and You can drop movies and other files into this but
when burned (taken out) it's done (one time burn)
Please elaborate on what You want to be the result.
iMovie HD 6 and iDVD'08 or 09 is a very nice combination.
Yours Bengt W

How do I Fade in and out, working with Midi events?

I'm new to logic.
How do you set certain virtual instruments(midi events) to fade in or out. I have a string arrangement written, and whenever the strings end it is very abrupt and unnatural. I want them to fade out, as opposed to just cutting like they do. I would also like to know how to fade in. Is it the same process?
Please help me out if you know how to do this.
Thanks...

I'm not sure what you mean about fading the instrument and not the notes. I just want to fade out one note/per instrument at the end of certain passages. Care to expound?
In general, MIDI does not provide a mechanism to control the volume of individual notes.
In MIDI (and sequencer terms), a note has a note on, a note number (which key was pressed) and how hard you hit that key (velocity). Then a corresponding note off. There is nothing in a note specification that let's you control the volume of a note through it's duration.
In MIDI terms, you can use a controller MIDI message, typically #7 which is used for volume, and modify that over the time the note is playing. But this is controlling the volume of the instrument not the individual notes - the same as turning up and down the volume on the instrument. All notes that the instrument is playing are affected equally - if you are holding a chord, the entire chord will ramp in volume. You cannot just ramp the volume of one note within the chord using this method.
(The closest MIDI can get to controlling individual notes volume is with polyphonic aftertouch, but this is not often supported and is a more advanced technique - given that you are new to this I'm going to ignore it for now to avoid over-complicating things. I mention it to stop all the people chiming in with "you're so wrong Beejay you muppet you can do this with poly aftertouch don't you know anything" blah blah).
Is that more clear?
Also, if you wouldn't mind, could you give me a step by step on opening the hyperview in the piano roll?
Open the piano roll, select View -> Hyperdraw -> Volume.
You can click/draw in it with the pencil tool to create MIDI volume (CC#7) changes.

How do I fade in or out music, because i want to put in muiltible song in one clip? can anyone help????

i want to fade in or out music to put heaps of music inb one clip please help

I'm not sure what you mean about fading the instrument and not the notes. I just want to fade out one note/per instrument at the end of certain passages. Care to expound?
In general, MIDI does not provide a mechanism to control the volume of individual notes.
In MIDI (and sequencer terms), a note has a note on, a note number (which key was pressed) and how hard you hit that key (velocity). Then a corresponding note off. There is nothing in a note specification that let's you control the volume of a note through it's duration.
In MIDI terms, you can use a controller MIDI message, typically #7 which is used for volume, and modify that over the time the note is playing. But this is controlling the volume of the instrument not the individual notes - the same as turning up and down the volume on the instrument. All notes that the instrument is playing are affected equally - if you are holding a chord, the entire chord will ramp in volume. You cannot just ramp the volume of one note within the chord using this method.
(The closest MIDI can get to controlling individual notes volume is with polyphonic aftertouch, but this is not often supported and is a more advanced technique - given that you are new to this I'm going to ignore it for now to avoid over-complicating things. I mention it to stop all the people chiming in with "you're so wrong Beejay you muppet you can do this with poly aftertouch don't you know anything" blah blah).
Is that more clear?
Also, if you wouldn't mind, could you give me a step by step on opening the hyperview in the piano roll?
Open the piano roll, select View -> Hyperdraw -> Volume.
You can click/draw in it with the pencil tool to create MIDI volume (CC#7) changes.

Audio Fade In Fade Out -1 Sec?

Captivate v5.5
I have created a v5.5 Captivate project, imported the audio to each slide after creating the audio with Audacity and am now starting to sync the audio with the animations.
I have just noticed that every slide in my project has the following audio setting;
I dont recall making this audio setting.
1. Where is the Fade In Fade Out option setting to ensure this does not get applied again to future projects?
2. I cannt see how to remove the 1 second Fade In / Fade Out for the whole project.
Do I have to edit this slide by slide?
Thanks,
Noel

Thank you Lilybiri for taking the time to open your "old" v5.5 - I really appreciate it.
If I had not taken that screenshot I might have started to doubt myself.
On receipt of your reply I went back to the project with the issue, and would you believe it, all the slides have reverted back to 0sec Fade In and 0sec Fade Out!
I have not made any changes and now have no idea why this happened in first place or what happened to make them revert to correct 0sec settings - but will keep an eye on it and hope that it was a one off Monday morning "glitch".
Noel

Is there a keyboard shortcut for the Fade In / Fade out Behavior

I use the Fade in/out behavior a lot and i wonder if there's a shortcut i've not found. what is it?
If there is not, can I create one? or for other behaviors / filters used a lot? Thanks for any help.

There is a way to do this using the System Preferences. I found this tip years ago on a web site I can no longer find anywhere, but I still use it and it still works:
1) Go to the Library, drag the Fade In Fade Out behavior into the Favorites Menu folder in the left-side column.
2) Go to the Favorites menu category in the Library, check to make sure your behavior is there.
3) Go to the Favorites menu in the main menu, check to make sure your behavior is listed as a menu item. Make sure to note the name of the menu item there.
4) If it's there, go to System Preferences, and click on the Keyboard & Mouse icon.
5) Go to Keyboard Shortcuts, click the + button at the bottom left to add a new shortcut.
6) Choose "Motion" from the Applications popup, then type in the exact name of the Fade In Fade Out behavior in the Menu Title box (it has to be exact, otherwise this won't work). You don't need the "Favorites" part, just the menu name, in this case "Fade In Fade Out".
7) Choose whatever key shortcut you want, but make sure it doesn't override any existing ones in Motion!
8) Click Add in the dialog.
Now, when you switch back to Motion, you can press that key you just added and it will instantly add a Fade In/Fade Out behavior to the selected layer automatically. This works with anything you can add to the Favorites Menu, just keep track of the name and you can add custom layers, filters, behaviors, or anything else you can stash in the Library, and recall them with a custom hotkey.

When I save and/ or export a video, the light majorly fades in and out.

I have noticed that the lighting in my videos fade in and out which ruins the quality of the video. There is nothing wrong with the original file and when I view the files before hand, the fading is not there. The fading is almost like the lighting in my videos (typically natural lighting, but sometimes studio) are strobe lights.
It typically happens when I save my project and go back to it or when I export it.
Is there anyway to stop this from happening?
This was happening before Yosemite by the way.
Thanks for any help you guys can offer.

Greyed imaged in the Import dialog box mean you have already imported the photos into Lightroom, so there is no need and no benefit to importing them a second time.
Just go to the Library module, search for the desired photos, and resume working on these photos.

Audio fade with fade in fade out effect

i want to make the audio fade along with the end of a clip when i use the fade in fade out transition i tried the audio cross fade but no luck could someone please help me out

Let me add to Tom and Al suggestion: if you want cross fade (not only fade in and out) your clips must have handles. In other words you should set up an Out point (in the left clip) and an In point (in the right clip): these must leave enough media in each clip to let cross fade to work; that's needed for either video or audio.
Piero

NOT cross fade...just FADE OUT

Similar Messages

Maybe you are looking for