Not defaulting through the Ship to Address from a previously created Cart?

Hi Folks,
Does anyone know of a way that prevents a new Shopping Cart defaulting through an performance locations and ship to address from a previously created Cart?
The issue we have is that the system is holding the previously used one on all new Carts. Our preferance would be for the system to clear these fields out. I would be interested to hear how other sites have dealt with such an issue.
Thanks, Mikey,

Hi Mike,
In our scenario the default settings are catched by the user's attributes in the org structure. For example ship to address is brought by the attribute ADDR_SHIPT. I thought this was the standard functionning.
Best regards,
Laurent.

Similar Messages

I cannot access anyone from my global address book, not even through the search. Any suggestions? iOS 7.0.4

I cannot access anyone from my global address book, not even through the search. Any suggestions? iOS 7.0.4
I could access this before.

mouse1832 wrote:
I've been to apple to speak to one of the so called genius' and even their baffled by the problem
and they told you , "Oh well" and you left without getting it resolved?

From which table the ship to address is picked up in SRM

Hi,
Can anyone tell me From which table the ship to address is picked up in SRM?
BR
Sairam

Hi,
See the foll related thread:
Table name for - ship to address.
BR,
Disha.
<b>Pls reward points for useful answers.</b>

How to enable the 'Ship-To Address' field only in 'display ' mode in the SC

Hello,
We would like the 'Ship-To Address' field to be locked for change mode in the SC.
Regards,
Lina

Hi ,
If you wish to hide or show fields, proceed as follows(through screen variants):
1. Determine the screen variant, for example, BBP_SC(For shopping cart), using the list in documentation of BADI BBP_SCREENVARIANT.
2. Copy this screen variant, for example, in Zbbp_SC, in Transaction SHD0.
3. Change the new screen variant as required. Note that you can only change the display properties for fields of table controls. You can switch the display on and off.
4. Implement the appropriate method (see the list above). Fill the export parameter EV_SCVARIANT with the new screen variant.
You can create multiple screen variants for a screen and then select these in the BAdI depending on the user or on other criteria.
here is sample code in BADI BBP_SCREENVARIANT implementation after creating Z screen variant.
Method IF_EX_BBP_SCREENVARIANT~GET_SCREENVARIANT_SC.
IF iv_progname EQ 'SAPLBBP_SC_UI_ITS'
AND iv_dynnr EQ '0120'
AND flt_val EQ c_fltval.
IF iv_scvariant EQ 'BBP_SC'.
ev_scvariant = 'Zvariant'.
ENDIF.
ENDIF.
ENDMETHOD.
Please reward points if helpful..
Thanks
Venkatesh

To capture the Mini-DV file through the 1394 firewire card from t

hii there!
first let mi make you understand what we people are doing ....
We people want to capture the Mini-DV file directly through the 1394 firewire card from the sony camcorder in to the MPEG2
format. Thent on the fly(i.e.during capturing into MPEG2) we also want to capture the metadata i.e (time,date etc. of the
original shooting event) into some text file. Our MPEG2 format requirements are: 8mbps viedeo,freq-48KHz,16 bit sterio,384
audio kbps, Deinterlace... we are using JavaMediaFramework-2.1.1e(Java Media Studio tool)..so we want to explore that tool
much more coz rightnow it's not supporting MPEG2(only supporting MPEG1) and also not supporting 1394 cpture card ...we want
the codec for converting DV-AVI to MPEG2 with date and time exctrated and much more explored details about JMf2.1.1 JavaMedia
Studio to get more familiar.....
for the above mentioned problem I am trying to add the mpeg2 codec inthe plugin of the jmf studio..and i have followed the
steps ..
Download the Codec from IBM
Extracted jmf.jar
Extracted codec.zip
Added files from codec folder to jmf folder
Made a jar out of it and name it jmf.jar
Replaced that with current jmf.jar (kept a backup)
Opened JMFRegistry and in "Plugins","Codec" and now unable to add " "
this becoz i am not knowing the exact way of recopiling that newly created jar file and because of that that mpeg-2 codedc is
not get added .....so i am looking forward for any help for the above mentioned problem!
I would be gratefull on getting ur help coz it's such challenging and techy concept to explore...
thanks..
nilesh hardikar
contact: [email protected]

I understand your pain. See BUG ID 4640032: JMF does not support DSVD encoding
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4640032
Add your vote, maye Sun will hear!

HT200109 Why do all my other Apple devices not care if the movie I rented from iTunes if it was downloaded directly to that device or not, but the stupid Apple TV won't allow you to play rented movies unless you rented it directly from the Apple TV?

Why do all my other Apple devices not care if the movie I rented from iTunes if it was downloaded directly to that device or not, but the stupid Apple TV won't allow you to play rented movies unless you rented it directly from the Apple TV?
Great, so now I have to airplay it by linking my computer to my Apple TV and then the movie has to buffer! So, all that time I spent downloading the HD video has to technically "download" again by buffering. The more I use Apple TV, the more I feel like this item was not created by Apple. I don't even use it for what I originally purchased it for. If I would have known that anytime I wanted to sync a movie from my computer to Apple TV by using airplay that it would have to buffer the movie, I would have never ever ever ever ever purchased this waste of time device. So the video has to technically play all the way through one time first so Apple TV can "remember" the movie to play it back in real time afterwards.
Am I missing something here? Am I doing something wrong that can be fixing my problem? I should have known that the Apple TV had so many things backwards when simple things like when you are using the remote and you reach the bottom of your list, in order to cycle back to the top of your list you have then press the directional buton back the other way rather than most modern day devices that will automatically cycle you back to the top or to the other side when you reached the bottom or end but keep on pressing the button. That **** annoys me when I am doing a search for a movie and have to type the name in manually and have to cycle back and forth to the letters. It makes me feel like I am using a rotary phone or something!

I was told by someone to try and purchase something directly from my Apple TV and that will help authorize my Apple TV. So I picked something that was free and it downloaded.
Then I went back to the Movie that would not work and it played just fine.
So it seemed to work. I will have to try it on other movies and TV shows later.

AT-MIO-16XE-50 device is not responding to the selected base address

I'm trying to install my AT-MIO-16XE-50 DAQ board onto my Windows NT desktop computer, but I'm having trouble.
Here's what I've done: I've installed LabView 5.1 and the NIDAQ 7.0 software onto my computer first. Then I've physically installed the DAQ board into my computer. After starting the computer, the plug-and-play system seems to recognize the new hardware and install drivers for it. It then says I need to reboot the computer, so I reboot the computer.
When I then look at my device manager, it lists AT-MIO-16XE-50 twice. Under the properties/resources tab, one of them lists "input/output range", "interrupt request", "direct memory access", and "direct memory access" (i.e., 2 "direct memory access"s). The second one only lists "direct memory access" once and nothing else under the properties/resources tab. Also, the first one says that it is working properly while the second one says that it is not working properly (Code 10). I've played around with chaging the "direct
memory access" numbers and after rebooting the computer have gotten both AT-MIO-16XE-50's in the device manager to say that they're working properly. So, now the DAQ board appears to be installed correctly, because the device manager reports no problems with it. However, there are still 2 of them. My first question is this: should there be only 1 entry in the device manager list, or are there supposed to be the 2 that I see? The entries do appear to be different from each other, but they're for the same device, so that's a little confusing.
When I open my Measurement and Automation explorer, only one AT-MIO-16XE-50 device is listed (so this looks good), and under "properties" all 3 "direct memory access" numbers are listed. So, this all seems good. But, when I click on "test resources" or "test panel", I get an error message saying that "the device is not responding to the selected base address". Considering that this device was plug-and-play, and I did not set the base address manually, I don't understand why I'm getting this error message.
What I've tried is to change the "input/output range" number by using the device manager. I've tried a few different settings (rebooting the computer after each change) and none of the different "input/output range" settings seem to work.
I'd appreciate it if you could give me any help on figuring out how to resolve this "not responding to base address" problem. The info on your web site
appears to suggest flipping dip-switches on the DAQ card, but my card does not have any dip switches because it is plug-and-play. So, right now I'm
clueless! Thanks for reading this, and I hope that you have more insight than I do.

Smaria,
The AT-MIO-16XE-50 shows up twice in the Device Manager because it reserves three DMA channels, and the ISA bus only allows two DMA channels per ISA slot. You mentioned that you were able to get both devices working properly in the Device Manager. Below is a link to a KnowledgeBase that describes the proper procedure to successfully accomplish this. You should verify that this is the procedure you followed:
Exclamation Mark Appears with Error Code 10 on Windows XP/2000/98 After Installing AT-MIO-16E-10
Spencer S.

HT2693 The sound will no longer come through my headphones on my iPad I've tried several different headsets. The sound works as normal without the headphones but will still not come through the headphones even thoug I have tried to reset it twice. Please

The sound will no longer come through my headphones on my iPad I've tried several different headsets. The sound works as normal without the headphones but will still not come through the headphones even thoug I have tried to reset it twice. This is the new ipad with retina display and is only 2 months old and otherwise works fine. Please help!

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPad. Nothing will be lost
Reset iPad: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPad for a refurbished one for this price. They do not fix yours.
iPad Service Answer Center
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPad Repair - iFixit

How can I install Mountain Lion in a VMware fusion, if it came with my macbook pro, and not purchased through the app store?

I have Mountain Lion on my Macbook Pro with Retina but I want to install Mountain Lion in a VM for application testing. I try to install it from the recovery partition but it states that when I put in my apple ID, it states that it was not purchased through the App Store. My OS came with my Macbook. Is there anything that I can do to get it to install in a VM?
Thanks

Not really. The license that comes with pre-installed OS is only for that Mac.
A. Preinstalled and Single-Copy Apple Software License. Subject to the terms and conditions of this License, unless you obtained the Apple Software from the Mac App Store or under a volume license, maintenance or other written agreement from Apple, you are granted a limited, non- exclusive license to install, use and run one (1) copy of the Apple Software on a single Apple- branded computer at any one time. For example, these single-copy license terms apply to you if you obtained the Apple Software preinstalled on Apple-branded hardware.
vs
B. Mac App Store License. If you obtained a license for the Apple Software from the Mac App Store, then subject to the terms and conditions of this License and as permitted by the Mac App Store Usage Rules set forth in the App Store Terms and Conditions (http://www.apple.com/legal/ itunes/ww/) (“Usage Rules”), you are granted a limited, non-transferable, non-exclusive license:
( i ) to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple Software...
(ii) If you are a commercial enterprise or educational institution, to download, install, use and run one (1) copy of...and
(iii) to install, use and run up to two (2) additional copies or instances of the Apple Software within virtual operating system environments on each Mac Computer you own or control that is already running the Apple Software, for purposes of: (a) software development; (b) testing during software development; (c) using OS X Server; or (d) personal, non-commercial use.
(I shortened B.i. and B.ii.)
http://www.apple.com/legal/sla/docs/OSX1082.pdf

Deployment Rule Sets do not properly launch the latest available version from the JRE6 family when the jpi-version is specified by the RIA

Issue Summary
In Java 1.7 Update 71, Java 1.7 Update 72 and Java 1.8 Update 25 Deployment Rule Sets do not properly launch the latest available version from the JRE6 family when the jpi-version is specified by the RIA. We've noticed this with Oracle Forms and Reports 11g where we have forms that specify Java 1.6 Update 20. We used to be able to specify Java 1.6 Update 26 in our Ruleset, but now the only version a that works in our ruleset is Java 1.6 Update 20 which is the same version requested by the JPI-Version attribute of the jar. The long term solution would be to upgrade Oracle Forms and Reports, however this isn't currently in the cards.
RuleSet.xml Test
Ruleset.xml
1
2
3
4
5
6
7
8
9
10
11
<ruleset version="1.0+">
<rule>
   <id location="*.javatester.org" />
   <action permission="run" version="1.6*" />
</rule>
<ruleset version="1.0+">
<rule>
   <id location="*.internaldomain.name" />
   <action permission="run" version="1.6*" />
</rule>
</ruleset>
Test 1 (Control)
Installed Java Versions:
– 1.7 Update 51 b13 (both x86 and x64 however x86 is invoked)
– 1.6 Update 26 b03 (both x86 and x64 however x86 is invoked)
Deployment Ruleset works as expected for both URLs
Test 2
Installed Java Versions:
– 1.7 Update 72 (both x86 and x64 however x86 is invoked)
– 1.6 Update 26 b03 (both x86 and x64 however x86 is invoked)
The RuleSet works for JavaTester.org however on internaldomain.name we get the following error:
With the trace logging turned on, I suspected the version attribute supplied by the RIA. I was able to trick Java by adding the following to my system deployment.properties file:
deployment.javaws.jre.0.product=1.6.0_20
deployment.javaws.jre.0.path=C\:\\Program Files (x86)\\Java\\jre6\\bin\\javaw.exe
deployment.javaws.jre.0.enabled=true
Because the RIA requests 1.6.0_20 it matches 1.6* from the deployment ruleset sooner than 1.6.0_26. However, if 1.6.0_20 is not available 1.6.0_26 should match according to the Deployment Rule Set documentation:
http://docs.oracle.com/javase/7/docs/technotes/guides/jweb/security/deployment_rules.html
The version of the JRE that is used is determined by the following order of precedence:
1. The current version of the JRE is used if it is available and matches both the version attribute and the version requested by the RIA.
2. The latest available version of the JRE is used if it matches both the version attribute and the version requested by the RIA.
3. The current version of the JRE is used if it is available and matches the version attribute.
4. The latest available version of the JRE is used if it matches the version attribute.
If no version is available that meets the criteria, then the RIA is blocked, and a message is shown to the user. To provide a custom message, include the message element.
As a result:
If Java 1.6.0_20 is listed in the version requested by the RIA and 1.6.0_20 is listed in the deployment.properties file, #1 matches.
If Java 1.6.0_20 is listed in the version requested by the RIA, but 1.6.0_20 is NOT listed in the deployment.properties file the #1 SHOULD match, but doesn’t. It used to match up-to and including JRE 1.7 Update 51 however the ruleset appears to no longer match in subsequent versions.
#2 should never match with our current Deployment Ruleset. It would match if we specified 1.7* as a version in the Ruleset.xml.
#3 used to be broken as well after JRE 1.7 Update 51 however this bug has been marked as fixed. See: http://bugs.java.com/view_bug.do?bug_id=8032781
I have reproduced this issue with Java 1.7 Update 71, Java 1.7 Update 72, and Java 1.8 Update 25 when one of these versions are installed with Java 1.6 Update 26.

I can't seem to edit this post anymore, for some odd reason.
So here goes;
I found this post in NVIDIA's knowledge base;
When installing an after-market graphics card into a certified Windows 8 PC with UEFI enabled, the s...
The interesting parts in this post are as follows;
When an after-market graphics card is installed into a motherboard with UEFI enabled in the system BIOS, or if the system is a certified Windows 8 PC with Secure Boot enabled, the system may not boot.
UEFI is a new system BIOS feature that is provided on most new motherboards. A UEFI system BIOS is required in order for the Windows 8 Secure Boot feature to work. Secure boot is enabled by default on certified Windows 8 PCs.
In order to get the PC to boot with a graphics card that does not contain UEFI firmware, the end-user must first disable the secure boot feature in the system's SBIOS before installing the graphics card.
Note: Some system SBIOS's incorporate a feature called compatibility boot. These systems will detect a non-UEFI-enabled firmware VBIOS and allow the user to disable secure boot and then proceed with a compatibility boot. If the system contains a system SBIOS the supports compatibility boot, the user will need to disable secure boot when asked during boot process
This leads me to believe that the BIOS update that wrecked my setup was 9SKT58A/9SJT58A, which only contains one change;
"Adds support for updating BIOS from a WIN7 BIOS to a WIN8 BIOS".
I've just ordered a cheap UEFI-compatible GT640 from Gainward, so I hope I'll be able to try that out this weekend.

My new ipad2 does not go through the setup when powered on.

Just rec'd a new ipad2 as a gift. When powered on, the device does not go through the setup process. What am I doing wrong? Any help will be appreciated. Thanks in advance.

What happens when you switch it on ? If it hasn't yet been activated then you should get a screen showing iTunes and a cable, indicating that you need to connect it to a computer that is running iTunes : Getting started guide : http://support.apple.com/kb/HT4053 . The iPad manual also has a chapter on getting started - it can be downloaded from here : http://support.apple.com/manuals/ipad

The device is not responding to the selected base address

my DAQ card is PC-LPM-16, a few days ago, i configed it properly. and i didn't use it for a few days, but didn't plug out from my computer. today i want to use it, but the MAX test showed that "The device is not responding to the selected base address." i setup my hardware and software again, but still can't resole it, what can i do now?
thank you very much.
liyongqin
2001-10-23

"The error could be happening for a variety of reasons. The first thing I would do is to visit www.ni.com/support/daq and follow the installation procedure, which includes troubleshooting steps on the error you are receiving.
If that doesn't work then try to install the board in another computer with no other devices installed. This will test to make sure the board is not bad. If all else fails call National Instruments and have someone troubleshoot the board and return and repair it if necessary."

TS4036 My icloud is showing a very old email address,while myitunes / appstore email is showing the new email address? How do i remove the old email address from icloud?

My icloud is showing a very old email address,while myitunes / appstore email is showing the new email address? How do i remove the old email address from icloud?

Welcome to the Apple community mohinderjeet.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

The safari can search website but it can not go through the icon. screen color blacken. solution?

the safari can search website but it can not go through the icon. screen color blacken. solution?

Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I can listen to ITunes on my ipad on a headset but they will not play through the speaker

I can play I tunes on my iPad and listen on a headset but the iPad will not play through the built in speaker

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
 Cheers, Tom

Not defaulting through the Ship to Address from a previously created Cart?

Similar Messages

Maybe you are looking for