Not dialing out

I brought my Airport Extreme to my mother for the weekend, and she only has dial up access where she lives, and hooked it up to connect to the net via the dial up. I put in the hone number the user name and password in the set up and after several hours of it saying it was dialing it finnaly connected. I know it wasnt the ISP that was busy or anything because at intermit times I would dial it manually and it would pick up, then I tryed her computer and was able to get on right away. Then I tryed my laptop which got on right away as well. Is there any way to turn on a sound or something to see if its actually dialing? It says it is dialing in my menu bar but that it is, but it's been unable to make a connection. I have tryed resetting it back to factory settings but that didnt work either after I reset evrything back up again.

Alan,
---- Try having it dial your cell phone, at least you'll be able to tell. I am not on a Mac at the moment, so I'm not sure of which settings by name, but are the settings for the internal modem similar to the AEBS? It seems like a few centuries ago I attended a school in Prairie du Chien, on the West side of the state (where the Wisconsin meets the Mississipi).
---- Gino

Similar Messages

Ports 1,2,3 will not dial out port 0 fine

Dear community,
I could use a little direction..
I have a 2821 "COMHS00ARB" SN: FTX1302A1UP
It has a VIC2-4FXO on port zero I have an analog phone line that functions perfectly, on ports 1,2,3 I get dial tone and they will receive calls but will not dial out.
other interesting observations:
1: If I connect a laptop to GE 0/1 I get not LAN Lights port GE 0/0 is fine and is the uplink
2: the Gig E port on the NME port I can not get LAN lights if I plug cable in from laptop
3: Aux on front of chassis same no lights on LAN
My first thought is to replace the VIC2-4FXO card to see if its faulty
My second thought is that maybe the 2821 has taken a hit from lightening.. however all internal phones seam to be fully functional, although when I select the line on the corresponding LCD hard button I do not get the hard button to light, even on the working line?
Any directions would be greatly appreciated,
Also if I replace card do I need to worry about firmware versions?

Hello,
It seems that the number you are trying to dial is not correct or the dialplan does not recognize it.
HTH,
Alex
*Please rate helpful posts

GE 31591 does not dial out

Hi - This is my second Skype phone. I first go the RTX 3088 and had to reboot the base every couple of days. I then bit the bullet and purchased the GE 31591 and set up was a breeze, the only problem I encountered was that I did learn to dial out I needed to dial 1-areacode - xxx-xxxx but I could live with dialing the extra 1. All was good for about 2 weeks and then out of the blue I tried calling my own cell number to look for my phone and noticed that it would not dial out. I can hear the phone dialing out and then it goes silent and my cell phone does not ring.(nor any othe phones that I dial) The GE 31591 recieves calls fine. I purchase a skype number so that I could get rid of my landline. I can dial out from my PC when I login to this same Skype account. I tried rebooting the base station but nothing works. This has been like this for a couple of weeks. I have invested alot of money and time into Skype and really do not want to go back to a landline.

Hi - I fixed this - It appears that a firmware update changed my Preferred line setting.

GE 31591 Will not dial out (UK)

I have a new GE 31591 with credit, I receive in coming calls but I am unable to dial out.
Any help would be appreciated!
Thanks

Is your phone connected to the landline? It sounds like it is trying to dial out on the landline, that is not connected.
Make sure that the phone is logged into Skype (showing your Skype name, credit balance etc.). Dial the number in full international form to make sure that works eg 00441234567890. Press the blue Skype button rather than the green button and you should get the option to make a regular (landline) call or a Skype call. Select Skype call.
If all this works then you can configure the green button to work like the Skype button, also setting country and area codes can make the dialing simpler.
/Simon

UC520 FXS ports will not dial out

Not sure what is happening on this one. UC520 latest sw pack has decided that the onboard FXS ports will no longer dial out. Dialing inturnal extensions is fine both ways. DID's incoming to those FXS ports also work. Dialing access code 9 for the PRI simply no go. I have rebooted the UC520 I have even changed the FXS seetings from Fax to Common area and back again seeing if that would clear up any bugs in the config, but still no luck.
So simply put FXS ports on UC520 will no longer allow outbound calls.
Thoughts!

Hi Cathal,
Please contact the Small Business Support Center at the phone number listed (Please pick the appropriate phone number in your region) in the link attached? One of our engineers should be able to assist you with this issue.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Best regards,
Wendy Yang

1841 router must accept calls NOT dial out

Hi,
I have a 1841 router with WIC-1B S/T interface.The scenario is like people from various countries dialing into the router (by using a number given by the TELCO where the router is physically locted). The router must accept these calls and provide access for internal resources. I am familiar with the scenario of a router dialing out to another router using dialer-string, dialer remote-name, username and password.
But how can the router with WIC-1B S/T be configured to accept analog calls (assuming it is possible).
Pls help with some config examples.
Thx n Regards
Sonu

Hi,
I have tried to fork up some information about it, but unfortunately I haven't found anything. What I'm sure the 2800/3800 series have digital modem PVDM hosting digital modems. It looks the 1800 series does not support it and the only way to terminate analogue calls is to use WIC-xAM modem card but obviously it cannot be used with ISDN line but analogue.
Hope it helps, rate if does
Krisztian
Krisztian

HTC Rezound Will Not Dial Out/Receive Calls

Ok, this problem has been annoyance for the last couple months. Basically every so often my phone will be unable to make calls or receive them, nor be able to send or receive text, thought 3G/4G work perfectly find. When the calls would fail would get this message:
"Call origination attempt fails due to an immediate signal loss(signal fade or no service)."
This seems to occur towards the middle of the day/early evening, rarely late night or early morning. Does not seem signal dependent because I generally have 3-5 bars. Generally occurs at my workplace more often then elsewhere though I have made calls with no problems from my office. I got the phone in December, worked great through January and February. Early March the problem arose here and there, each time was isolated and would clear up in 5-10 mins, wrote it off as fluke problems with the network. Also of note, this is about when I became aware they were upgrading our network to 4G. The problem got increasing worse, where it was almost everyday from 11 am to 7 pm I couldn't make/receive calls. Finally I decided I would do a factory reset. After the reset had no problems at all. Worked great for about a month, but starting a week ago it came back and slowly getting worse again.
Any ideas? I real hesitant about swapping hardware because I think its ridiculous getting a brand new phone just to replace it with a slightly less broken phone(if lucky). Verizon's track history on refurbished phones is not too good. Every person I know who has had a refurb traded in one problem for another.

I have same problem with my HTC Rezound

AUDIOLINE IP-7 DOES NOT DIAL OUT ANYMORE WITH VERS...

... can someone help me to solve this problem, please? Thanks!

The Photoshop executable really should be showing 12.0.4.0 as the executable version should have been updated by the updater.
I'm sorry for the really basic question, but did you reboot after installing the 12.0.4 update?
I do vaguely remember a few forum posts claiming the updater had only worked partially, though in my own case it updated all the files no problem. Can you recall whether you changed anything under the Photoshop 32 bit installation area (e.g., did you move or remove any of the Adobe plug-ins, for example)?
If memory serves, the workaround for a "partial update" was to uninstall Photoshop, then reinstall 12.0.0, then update to 12.0.4.
-Noel

Help? iPhone4 does not always dial out, receive calls or send and receive texts.

My problem started about 8 days ago. I did nothing to my phone, changed no settings, yet last Tuesday it just stopped sending texts for a period of about 4 hours. I could not dial out. Basically, my phone was useless. I also noticed the 3G was not working. It would connect to my home wifi network but nothing else. It started working that night. During this past week, it has done this same thing off and on again. There is no particular pattern. The rest of my family have 3 phones (not Iphones, but basic cell phones through Verizon) and they have not had one issue. During my "blackout" periods, I will have them dial my phone and it will ring on their end for me, but my phone actually will not ring. What gives?? Also, when I am not able to receive or send texts, when my phone starts working again, I will receive all texts I could not get all at once. So, to me this strongly sounds like a Verizon issue within their network. Please help??

Hi Elizabeth Cara, I like to help with the issues with your iPhone 4. The details you provided were great. However, I like to ask a few more questions. How often do you restart your iPhone 4? Are you mainly on the indoors when these issues occur? Even though you did not make any changes on your iPhone 4, it is good to double check make sure they are all set properly. Here are a two suggestions you can use. One is to reset your network settings via this link http://tinyurl.com/dxuf54m. Another suggestion is to do a ensure your Wi-Fi is disabled on your iPhone 4. Here are the steps http://tinyurl.com/bpekjpj. Give these options a try. Retest your iPhone 4 after each suggestion seeing if either helps with the issues reported.
Thanks,
EdW_VZW
Follow us on Twitter @VZWSupport

My blackberry is dialing out on its own, explain how this is possible please :)

My blackberry curve dials out the same number without any attempt on my part, for instance I had left my phone on the table and it dialed out. It continued to dial out the same number until I deleted the number from my contacts.This occurred numerous times on separate occasions.
Not only did it dial out that number but also spelled out the name of the individual it dials out on a voice txt. How is this possible?
It does not dial out any other contact and ever since i've delted this contact the phone no longer dials out.
what are some explanations for this problem?

Better news my charger I was using appears to maybe be part of the thing. I wouldn't work so I got my brothers and it charges so is it possible the old charger was shorting it thus the safety bit killed the power? Maybe the angle is just happen stance.

Wont dial out

My droid will not dial out. I get a message like this "your call cannot be completed as dialed".. I know I'm dialing correctly.
I've taken the battery out and dialed #228 to program.. nothing has worked. Any idea?

Can it call other numbers and just not a specific number? If it's just 1 number I would suggest trying to call that number from another phone to see if it works. If it can't call any numbers make sure you have signal and are not in airplane mode.

Phone wont dial out

I live in California, daughter is visiting New York and her phone will not dial out. Any suggestions she has tried dialing 1+ area code + number and it still wont work.

guys thanks for those who view my post.
the problem was a bad phone.

Unity Connection 8.6 not able to forward from extension (dial out)

Dear all,
I'm having a problem at a customer where i'm not able to forward calls externally from the Unity (that's a wish too).
Basically here is the request for which I'm having an issue:
- I'm making a menu with a number XXX (CTI Port) with a System Call Handler
- Under that menu i've 3 choices which points to 3 internal numbers (YY1, YY2, YY3) (CTI Ports).
- All the CTI Ports are forwarded to international numbers which are the final destination
So the flow is the following:
NOT Working
- XXX --> Choice 1 --> YY1 --> Forwaded all to 000countrycode
Working
- XXX --> Choice 1 --> YY1 --> Forwarded all to 444 (internal number)
The strange thing is that I tested everything when I was on site by calling internally XXX from an internal number and it was able to forward all my call to the international number ...
If anyone have a clue about what I can do, I'll appreciate a lot ...
Thanks in advance
C.

Hi Taranjit,
The rules are not made to enable unity to dial out, my goal was to permit only internal calls, but in this specific case, the internal number, is a CTI Port forwarded all to the external international number...
I tried the Unity connection system handler from a internal phone and it was working perfectly, but not if the call is coming from outside apparently.
Kind regards
Christophe

MeetingPlace Express 2.1.1.2 Dial Out was not Successful

I'm configuring a MeetingPlace Express v.2.1.1.2 and I can't make the MPX do the call to the guests of a meeting.
I make the configuration test in: Services > Logs > Verify Configuration > Call configuration verification and show the following error:
==============================================================
==============================================================
Call-Config Report
Summary
WARNING:The H.323 ID should match the host name
Valid E.164 Address has been configured
H.323 gateway has been configured
Error: Dial Out was not Successful
Call-Config Report Details
H.323 Details
H.323 enabled : YES
E.164 address : 196
H.323 ID : mpxadmin
H.323 gateway 1 : 010.145.002.030
SIP enabled : YES
DialOut Session Summary
VUI Configuration: 250 Sessions, 250 Confs
*** VUI INTERNAL STATUS UTILITY ***
DebugMenu:
1) Quick Status of all Ports 4) Make Test Call
2) Verbose Status of Port Range 5) Show All Confs
3) Display complete Port Information 0) Quit
Enter the Command (0 -- 100) []: You entered 4.
Enter destination for your call: The Telephone Number is 196. Len is 3
Do you want specific ports? (t -- F): You entered f.
Placing Call .....Call was unsuccessful: Ring No Answer.
DebugMenu:
1) Quick Status of all Ports 4) Make Test Call
2) Verbose Status of Port Range 5) Show All Confs
3) Display complete Port Information 0) Quit
Enter the Command (0 -- 100) []: You entered 0.
==============================================================
==============================================================
That parameter could check?
Here I place information on the configuration of my network:
CUCM v.7.0 --> 10.145.2.10
Voice Gatweay --> 10.145.2.30
In CUCM > Device > Gateway --> Gateway: 10.145.2.20 | Description: Cisco MeetingPlace Express | Type: H.323 Gateway | IP: 10.145.2.20
Please expect your valuable help!
Thanks a lot!
ErnestoG

hi Ernesto,
As the problem you are facing is a dial out issue on MPE, go
through the checklist mentioned below in order to confirm the configuration
is intact.
Here is the checklist :
1.    Ensure that H323 GW is defined on CCM/CUCM.
Device > Gateway > find.
Look for a device name that equals either MPE's hostname, FQDN, or IP
Address.
2.    Ensure that h323 Gateways are configured on MPE.
MPE Administration Center > System Configuration > Call Configuration > H323
Configuration
Ensure that h323 is enabled.
Ensure that you have entered your CCM's IPs in h323 Gateway 1, 2
3.    Ensure that CCM's interface with MPE is up.
Ensure that MPE's IP Address is listed under the "IP Address" column.
Ensure that this IP Address is that of the FIRST NIC on MPE, not the second.
4.    Verify that MPE has the CSS required to call the destination.
FIRST, FIND MPE's CSS:
When MPE places a call, the CSS in question is Device > Gateway > MPE-GW >
Inbound
THEN the relevant config is under Device > "Call Routing Information -
Inbound Calls" > Calling Search Space
SECOND, FIND DESTINATION PATTERN's PARTITION:
If the destination is an IP Phone within the CCM/CUCM Cluster, then the
relevant config is under Device > Phone > click on Directory Number in CCM.
If the destination is a PSTN endpoint/phone, then the relevant config is
under Device > Route Pattern.
5.    Ensure that your user profile is set to allow outdials.
MPE Administration Center > User Configuration > User Profile Management >
Your User Profile > Can call out of meetings should be set to "Yes".
6.    When you place a call from from the CLI, the system applies permissions
from the "Guest" User profile since mpxadmin or root are not Users within
the MPX application. To allow this to work, you need to verify two
settings:
MPE Administration Center > User Configuration > User Profile Management >
Guest > Can call out of meetings should be set to "Yes".
Ensure that the Guest profile is not in a "locked" state.
MPE Administration Center > System Configuration > Usage Configuration >
Allow Guest outdials should be set to "Yes".
Hope this helps!
Thanks,
Karthik

Phone can dial out but does not ring on incoming calls

We have a strange problem with a 7961G phone. It's configured the same as all of our other phones in CMM, but it can dial out but when dialing in the phone does not ring nor does the call appear to be routed to the phone. I called out from the phone to my cell and it displays the correct Caller ID information. Any ideas???

I would check the partition that the DN on the called phone is in and the CSS of the calling phone. These are the two fundamental principles that control when a phone can call another phone.
You might want to change the partition of the called DN to momentarily, to see that the calling phone can call it. All phones can call the partition unless there are explicit blocks put in place.

Not dialing out

Similar Messages

Maybe you are looking for