Not display views/tables on DB connect source system

Dear Experts,
After creating a oracle DB connect source system, I want to create data sources based on oracle db. But it is not showing any view/table.
Connection is up and running.
Please advice.
Thanks,
Thilini

Hi Thilini,
Are you sure that the DB user on Oracle has sufficient authorizations?
Does the search help support wildcards? Did you try w/o any wildcard or enter a table or a view name supplied by your Oracle DBA?
Best regards,
Sander

Similar Messages

Automatic Payment program -line item cleared not displaying in table

automatic Payment program -line item cleared not displaying in table
i have re run the APP program DUSR1 same earlier it has run twice but table dose not show double payment to vendors how to resolve the issue.
Can some one please guide me on this.

Hi Priyanka,
First, which table are you referring to. If your fist APP run clears the line item, it will no longer be available in the open item.
Please be more specific on the problem so that we can try to help you. If possible, please provide screenshots.
Regards,
Ganesh

DB connect source system creation in BI

Hi,
I would like to create a DB connect source system to an external MSSQL 2005 database in RSA1.
The external MSSQL 2005 database is setup using Windows Authentication mode.
Question: Which user actually should I specify when creating the source system in RSA1? or which user should I assign the db_ddladmin role in the external MSSQL database?
Many thanks,
YJ.

Hi,
Please note the following with regard to the user:
To avoid problems loading data, proceed as follows:
1. Create a special login for the extraction. You should add this login to the db_ddladmin database role in the
corresponding database. This generates a similar DB user at database level. The user you use must have the 'CREATE VIEW'
authorization at least. This is contained in the role mentioned above.
2. For the extraction, you should only use DB views that were created under this DB user. (refer also to type conversion, naming
convention and so on)
3. Assign the necessary authorizations (SELECT at least) to the selected user in the source tables, or the columns of these tables.
4. Use the specially created login in the logon information when you set up the DB source system in BW.
You will find much more detailed information on how to setup the connection and known problems and issues in the
attached note 512739.
Best Regards,
Des.

Problem in creating DB Connect source system

Hi All,
Iam creating a DB Connect source system to a legacy ORACLE database.
Since my legacy database is ORACLE, I have given the TNS name as the connection info.
The source system got created successfully. but the problem is, upon clicking on 'datasource overview', the system has to generate an application component hierarchy. But it is showing the same application component hierarchy which is there for flat file source system, and iam not getting the option to "select Database Tables" where i can create and edit the datasource.
please help me out.
help would be appreciable and carry reward.

Hi,
Create source system first.
you have to select the option "Database system (Data and meta data using SAP DB Connect)".
Now enter the database specific information.
DBMS:
Username:
Pwd:
Conn. Info:
Conn. Info should be the TNS name if it is oracle database.
after giving the relevent information save it, and come back. Source system will be created.
Now right click on source system and select the option " select Database Tables". it will show you the list of tables or views on that database.
select the table/view on which you need to create data source, and click on "edit datasource" there you can generate datasource.
after creating the datasource, replicate it... adn proceed.
any doubts plz ask me.
Message was edited by: suman dara

Change a migrated DataSource for DB Connect Source System

Hi,
I have created a DataSource for a DB connect Source system with transactioncode RSDBC as follows:
1. select database TableView
2. choose Edit DataSource
3. fill in the field Application Component (default stated NODESNOTCONNECTED)
4. generate datasource
Result: the datasource has been created in the right application component. As I want to migrate to BW 7 I have migrated the datasource (with export) and afterwards activated it. Now we need to add more fields to the database TableView. After the fields have been added I want to make these fields also available in the DataSource created before.
How can I do this ?
When using transaction code RSDBC I found out that the application component is stated again NODESNOTCONNECTED instead of the application component filled before. Is it possible that changes in the TableView will always lead to create the DataSource all over again (new InfoPackage, new Transformation rules, new DTP).
Thank you in advance for your help. Kind regards, Minouschka

Hello,
We have basically the same problem. An existing data source from a DB-connect client and now need to add a new field but edit mode BW does not provide the ability to add or delete existing fields.
Were you able to complete this and if so how did you do it?
Thank you,
Rick

How to create UD Connect Source system and datasources.

I am currently working on BI 7.0 and I need to report on Standard Queries on xPD (Extended Applications Product Defination)
In the BI Cont library it states the data for this application is fetched using UDI rather than Table Extraction. Can anybody please help me with documentation on Steps for creating a UD connect Source system and UD Datasources and how I should proceed.
Edited by: Amit Pal on Feb 19, 2008 6:17 AM

Hi,
Pls chk this link;
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/icc/bw-udc-jdbc%20universal%20data%20connect%20jdbc%20interface.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/11cfa83d-0401-0010-9597-d3b7f487d72d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f094ba90-0201-0010-fe81-e015248bc5dd
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff
http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/frameset.htm
hope these helps,
Regards
CSM Reddy

Db Connect source systems

Are DB connect source systems also created in SM59 or just directly in RSA1? Thanks

Check out the following Links
http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/content.htm
Step by step guide.
http://www.slideshare.net/blackwhites/sap-bw-connect-db

Ssl or tls lock is not displayed to confirm a secure connection

FF 4.0.1
XP pro sp 2 or better
extensions
TabMixPlus
FireFTP
DownThemAll
Java Quick Starter
When connecting to a secure site the lock icon is not displayed to indicate that it is a secure connection. Nor have I noticed any type of notice that a connection is secure.

Credit the-edmeister
The Statusbar is gone and the "lock" with it. Security information about a web page is shown by the Site Identity Button.
https://support.mozilla.com/en-US/kb/Site+Identity+Button
You can add a padlock to the location bar with the Padlock add-on- https://addons.mozilla.org/firefox/addon/padlock-icon

Ini_trans and max_trans are not displaying on tables

Hi Experts,
When i am firing below query, It's not displaying ini_trans and max_trans. I know there are certain default values are set by oracle for these.
SQL> select table_name,ini_trans,max_trans from dba_TABLES Where table_name='MESSAGE';
TABLE_NAME INI_TRANS MAX_TRANS
MESSAGE
Complete Table Structure is as follows
========================
CREATE TABLE "ORCL"."MESSAGE"
( "ID" NUMBER(20,0),
"NAME" VARCHAR2(128),
"CLASSNAME" VARCHAR2(256),
"DESCRIPTION" VARCHAR2(1000),
"OWNER" NUMBER(10,0),
"TYPE" VARCHAR2(64),
"STATE" VARCHAR2(256),
"STATUS" VARCHAR2(256),
"CREATEDBY" VARCHAR2(64),
"DTTMCREATED" TIMESTAMP (3),
"LASTUPDATEDBY" VARCHAR2(64),
"DTTMLASTUPDATED" TIMESTAMP (3),
"INUSEBY" VARCHAR2(64),
"INUSEID" NUMBER(20,0),
"INUSESINCE" TIMESTAMP (3),
"VERSION" NUMBER(20,0),
"REVISION" NUMBER(20,0),
"ARCHIVEDAY" VARCHAR2(32),
"APPLREF" VARCHAR2(64),
"APPLSTATUS" VARCHAR2(64),
"PRIORITY" NUMBER(10,0),
"FORM" NUMBER(20,0),
"FORMNAME" VARCHAR2(128),
"STP" NUMBER(1,0),
"SERVICE" NUMBER(20,0),
"SERVICENAME" VARCHAR2(128),
"STAGE" VARCHAR2(64),
"STAGEINDEX" NUMBER(10,0),
"STAGEREVERSE" NUMBER(1,0),
"STAGECOMPLETE" VARCHAR2(256),
"STAGEREQUIRED" VARCHAR2(256),
"STAGENEWTRANSACTION" VARCHAR2(256),
"STAGESTP" VARCHAR2(256),
"PRIORITYGROUP" VARCHAR2(32),
"INSTANCEID" NUMBER(10,0),
"DTTM" TIMESTAMP (3),
CONSTRAINT "MESSAGE_PK" PRIMARY KEY ("ID", "ARCHIVEDAY")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE(
BUFFER_POOL DEFAULT) LOCAL
(PARTITION "PART_FUTURE"
PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE(INITIAL 131072 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "STP_DATA" ,
PARTITION "PART_DEFAULT"
PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "STP_DATA" ) ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
STORAGE(
BUFFER_POOL DEFAULT)
TABLESPACE "STP_DATA"
PARTITION BY LIST ("ARCHIVEDAY")
(PARTITION "PART_FUTURE" VALUES ('0')
PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
STORAGE(INITIAL 2097152 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "STP_DATA" NOCOMPRESS ,
PARTITION "PART_DEFAULT" VALUES ('1', null)
PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
STORAGE(INITIAL 458752 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "STP_DATA" NOCOMPRESS ) ENABLE ROW MOVEMENT
Could you please let me know why Oracle not displaying its default values? Oracle version is 11.1.0.7.0

This is a partitioned table. Check DBA_TAB_PARTITIONS. INI_TRANS and MAX_TRANS are defined at partition/subpartition levele as and where applicable.
Thanks,
Joy

Full Text not Displaying in table

Hi Experts
I am displaying Long text in Text elements in table But It is not displaying full Text only Half of text is displaying.
How to overcome this? Is there any length limitation for text elements in table.
and Variable type is STRING
i am concatenating lines from Read text FM.
Regards
Jagadish
Edited by: acj_vy on Aug 17, 2010 10:23 AM

Hi,
You should not concatenate the text into string which you read using READ_TEXT.
You should loop at the table and then display the text using work area of the table.
It will be displayed line by line as it is getting displayed in your standard transaction.
Thanks,
Archana

Wirless icon not displaying, but says I am connected to network

I am a new Iphone user, so I apologize is this a rookie questions. I believe I am connected to my house wireless connected as the name of my network is checked off when I go to settings and Wifi.
My question is, though, why is my icon not displaying on the top left corner? It displays when I am connected at work and everywhere else I was able to connect. Is there something in my settings that I may have checked?
And, does that mean I am not really connected wirelessly?
Thanks in advance for your help!

Thanks, all. So, I just rebooted and there was no change.
Then, as SteveCWatkings recommended, I went into my settings page. I went into the properties page, and there isn't anything listed beside IP address, Subnet Mask, Router, DNS, etc. They are all empty...
*UPDATE*
Okay, something just happened. AS I WAS RESPONDING, I was clicking on each of the fields (IP address, Subnet, etc to see if I could enter information since they were empty. And,when I got to DNS, it allowed me to type something in. Not knowing what to enter, I clicked back and it took me back to the Settings page. So, I clicked on my network again and when I tapped my network, all the fields were filled in, and the icon appeared.
So, now it appears to be connected. I don't know if it will remain connected, or if I had to tap something (DNS?) or if it was glitch, but it appears to be working now.
Thanks a ton!

DB Connect Source System Creation

Hi,
I am trying to create source system (DB Connect) to extract data from SQL Server to BI.
I had user id/pwd in DB who is authorised to read view created by DB personnel.
n BW Description of Database Connections Screen
There are two fields
CONN.INFO and PERMANENT
What is the functionality of those 2 fields and from where can i get CONN.INFO
Thanks
Krishna

Hi,
Please note the following with regard to the user:
To avoid problems loading data, proceed as follows:
1. Create a special login for the extraction. You should add this login to the db_ddladmin database role in the
corresponding database. This generates a similar DB user at database level. The user you use must have the 'CREATE VIEW'
authorization at least. This is contained in the role mentioned above.
2. For the extraction, you should only use DB views that were created under this DB user. (refer also to type conversion, naming
convention and so on)
3. Assign the necessary authorizations (SELECT at least) to the selected user in the source tables, or the columns of these tables.
4. Use the specially created login in the logon information when you set up the DB source system in BW.
You will find much more detailed information on how to setup the connection and known problems and issues in the
attached note 512739.
Best Regards,
Des.

Issue in while connecting Source system

Hi All,
I mistakenly Ran the function module RSAP_BIW_DISCONNECT in BIW, I suppose to run this FM in Source system side,
We observed that Source system in RSA1 (BI) has been deleted), and also one record from the table RSBASIDOC (which is from source connection) has been deleted .
When I try to create he source system in BI, after entering logical system and ALEREMOTE and BWUSER logins, it was asking me to login to source system, after entering the details,
A pop-up message:
RFC destination already exists in source system
Do you want to use this destination, check, or
cancel source system connection?
options: USE, CHECK and Cancel, -> We pressed USE
Then it came back to RSA1 screen and a pop-up message
Connection BA is used in the ERQXXXX
source system as a connection BWQXXXX to BW.
Do you want to delete this connection in the source system?
Connection Is Restored After It Has Been Deleted Successfully
Options: Delete, Do not delete.
When we go for Delete : It is saying that "Error in source system ERQXXXXX"
Thanks in Advance,
Teena

Hi,
Please find the link which might help you:
http://help.sap.com/saphelp_nw70/helpdata/EN/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
Best Regards,
rajani

Error connecting Source System

We are on BI 7.0, just did a system copy of BW production to make a sandbox. Similar activity was done for ECC sandbox. Wehn I do a check on sourcesystem in RSA1. I get below messages.
BI unknown in source system
BI IDoc type ZSBB008 is not the same as source system IDoc type
The following errors occurred in the source system:
Entry in inbound table not found
Entry in outbound table not found
Source system cannot use any of the proposed connection names
I tried to delete the source system, but it doesn't gets deleted and gives below message:
No connection between Warehouse BWXCLNT010 and source system ECXCLNT010
Then I try to recreate the parter functions in WE20 in ECC(source system). When I am making an entry for RSSEND. I am not able to enter the Basic IDoc Type as ZSBB008. It says "Basic IDoc type ZSBB008 not found". I see the table RSBASIDOC has an entry for the source system & BW for this idoc type as active.
Kindly help as to what is wrong?

Hi,
Below notes could help you to resolve ur prob..
325470 Activities after client copy in BW source systems
325525 Copying and renaming systems in a BW environment
184971 Notes on BW source system connections
You can also search in SDN/service.sap ' How to doc... establishing connection betwn BI and ECC.
Thanks,

Problem While creating DB connect source system to BW

Hi Guys,
While Creating DB sourc system in BW.The source system was not creating.
Sorcesystem-Create- selected the DB source system
Logical system: TAXIA03TST
Description:For Testing
DBMS:ORA
Username:
Pass word:
Given the ORA user name and password
Connection info:TAXIA03TST
After that it was saved.
After that it was going to the pop up screen Sytem log ,correct ,cancel
whe i select the correct,the source system was not created.
Can anybody help me out in creating the DB dource system.As it was very urgent.
points will be awarded.
Thanks,
Venkat

Hi,
This may help you to some extent:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2f0fea94-0501-0010-829c-d6b5c2ae5e40
Please check the SAP Note 339092
regards,
Pruthvi R

Not display views/tables on DB connect source system

Similar Messages

Maybe you are looking for