Not displaying reciepents more than 10

Hi All,
we are implemented 'Send Screen for E-Mail or Fax' application from PC-UI read book in crm portal. its working fine but its not showing more than 10 reciepents in pop in screen. its hardcoded in standard class. i am using zclass which i copied from CL_CRM_BSP_BF_MAX_ACCESS class and CL_CRM_BSC_MAX_SC.
Thanks

Subra,
     As it is getting triggered for every scenario, try to keep a condition before passing
     the number of recipients in the method.
     e.g. you will assign an event 'ABC' for Send Screen for E-Mail/Fax right, so keep
     a condition that if the event is 'ABC' then change the number of recipients in the m/d.
     I think you already know how to get the event at runtime, but anyways please use the
     below code to get the event in the method.
     data event type ref to cl_htmlb_event.
     event ?= cl_htmlb_manager=>get_event ( runtime->server->request ).
     if event->id = 'ABC" then change the no of recipients.
     Let me know if you face any further issues.
Best Regards,
Arun

Similar Messages

Mailbox Name Not Displayed on More Than 1 Email Ac...

I am not sure if this is just me or if it is a general bug type thing (anyone else that has noticed it feel free to tell me its not just me!).
When I add more than one email account to my phone the first has the 'mailbox name' given to it in the setup, but the others come through as a big string of letters and numbers so when I try to email I cannot figure out which is which! Also when I add them to the home screen they have the gobbledy **bleep** name there too.
Can anyone help me with this?
Thanks,
Nix

lol, its cool, if I was dissin ya I would have put duh not doh! lol
It is 3 hotmail accounts I have but I have just tried to add my yahoo account too and that is all in code as well, the only ones that are correct are my first hotmail and then my work one says 'mail for exchange' instead of the address which i assume is just how it goes, but all the others are in code!!
This is well annoyin me! lol
N x

Can not color label more than one file at a time

Hi,
I've had this problem since 10.6.6-ish, i can not color label more than one file at a time in the Finder.
Wether i select two, twenty or twohundred only one file gets color labeled.
It doesn't seem to matter if i assign a color label through the File menu or right click > label.
Figured a re-install might fix this but it hasn't (even a clean install without restoring any kind of backup).
Does anyone else have this issue and/or a fix for it?
Thanks,
Jay

Aaaaanyone ?

LSMW For Converting Open Sales Orders (not working for more than 1 item)

Hi,
I am using following standard object for Open sales orders .
Object               0090   Sales documents
Method               0000
Program Name         RVINVB10
Program Type         D   Direct Input
Its not working for more than 1 line item.
For more than 1 line item its giving Error saying that
'102122                         V1                   845
Print parameter SAPML2 1 is not defined
Can anybody help me out in this regard.
Thanks in advance.
Nitin.

hello, friend.
i will still research the subject. but the first thing that comes into my mind is t-code VA05. with this, you have the option to change the Plant en masse. so a possible workaround is for you to list a number of sales orders using VA05. you then sort the line items by Plant. choose all items with the same plant, change the plant via mass change... then change back to the original plant. hopefully, the new settings should apply.
do test a few sales orders by doing this for a larger scope.
regards.

Server does not support setting more than 5 shared access policy identifiers on a single container

Hi,
I upload a video file to a new Asset. I then attempt to create a streaming URL by creating an Access Policy and then a Locator, which I use to generate the URL used for streaming.This works great. Until the 6th time you execute
that code against the same Asset. Then you receive this error:
"Server does not support setting more than 5 shared access policy identifiers on a single container."
So, that's fine. I don't need to create a new AccessPolicy everytime, I can reuse the one I've created previously, build a Locator using that same policy. However, even then, I get the error about 5 shared access policies on a single container.
Is this the Lmitation of media service? or am I missing something?
Following is the code I used for this:
if (AssetId != "")
                inputAsset = (from a in _context.Assets
                              where a.Id == AssetId
                              select a).FirstOrDefault();
                policy= (from a in _context.AccessPolicies where a.Name==inputAsset.Name select a).FirstOrDefault();
                var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
                var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
                assetFile.Upload(singleFilePath);
                locator.Delete();
                MediaElement media = new MediaElement();
                media.AssetId = inputAsset.Id;
                media.Title = Path.GetFileName(singleFilePath);
                var result = Save(media, singleFilePath);
                return inputAsset;
            else
                inputAsset = _context.Assets.Create(User.Identity.Name, AssetCreationOptions.None);
                 policy = _context.AccessPolicies.Create(
                                    inputAsset.Name,
                                    TimeSpan.FromDays(30),
                                    AccessPermissions.Write | AccessPermissions.List
| AccessPermissions.Read | AccessPermissions.Delete);
                 var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
                 var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
                 assetFile.Upload(singleFilePath);
                 locator.Delete();
                 policy.Delete();
                 MediaElement media = new MediaElement();
                 media.AssetId = inputAsset.Id;
                 media.Title = Path.GetFileName(singleFilePath);
                 var result = Save(media, singleFilePath);
                 return inputAsset;

Hi,
I found some information related to
Stored Access Policy , Shared Access Signatures   please check if it helps.
Regards,
Shirisha Paderu.

I want to display message more than 50 characters

hi experts
i want to display message more than 50 characters, and the fm 'POPUP_DISPLAY_MESSAGE' can display just 50characters, my message maybe much long, what other fm can i use?
btw, i cann't use POPUP_TO_CONFIRM to let user select, the popup screen should only have one button to let user type in.

thanks for ur reply,
but 'POPUP_TO_DISPLAY_TEXT' just has two lines(every line has character limit), my message to be displayed may be much long.
why i need the fm is that, i want to display error message when user made error operation, if i use 'message msg type 'E' ', the message display in the status bar at the left-down place and cann't display the whole message if the message is to long.
so i had like to find a fm like 'POPUP_TO_CONFIRM' which can display multipul lines and just with one button(which is the user required...).

Bought a ipod nano 6th and is not playing for more than 2 min?

bought a ipod nano 6th and is not playing for more than 2 min?

The most likely problem is that the headset is not inserted fully. When you insert the headset, you should feel and hear a "Click" to let you know it is inserted all the way.
The problem is that if it is not inserted all the way, the nano does not detect it. If it is not detected, it will pause playback when the screen goes dark. This is to keep your battery from draining when there is nothing connected to listen to the music.
i

How to identify the no is prime or not ,no is more than 9 digit?

how to identify the no is prime or not ,no is more than 9 digit?
becaz long does not store more than 9 digit , like example
long number=9876543218; // it will throw the compile time error
so how to get this?

It is too easy to understand whether the given value
is prime or not.
THe following code snippet does this .
     public boolean isPrime(int pr){
          int num = 0;
          for(int a = 2; a < pr; a++ ){
               if(pr % a == 0)
                    num = 1;
          if(num == 1)
               return false;
          else
               return true;
     }(Simple eh)And if you end at the square root of pr you get a nice speedup. You can get a further speedup by changing the incrementation strategy (2x really easily, 6x if you start at 5 (explicit test for 2 and 3) and increment alternatively by 2 and 4), but that's not entirely necessary.
~Cheers

My iPhoto was deleted so I re-installed it, since then iPhoto will not say open more than 10-15 seconds. How do I get it to stay open and keep my pictures?

My iPhoto was deleted so I re-installed it & since then, iPhoto will not say open more than 10-15 seconds. How do I get it to stay open and keep my pictures?
It's a MacBook Pro, I got it last year (2010) not sure where to find the operating system info.
Please Please Please Help!
Thanks!
Katie

I always recommend backing up the iPhoto Library file under your Pictures folder first.
You can try removing the iPhoto Preference file in your User Library folder. Close iPhoto. If you are using Snow Leopard (10.6) click on Go in the Finder menu bar. Click on Library. If you are now on Lion (10.7), you'll have to hold Option key while clicking Go to see the Library selection. Once here, find the Preferences folder. In here, look for the following:
com.apple.iPhoto.plist
Move this file to the desktop. Start iPhoto and see what happens. If it is working, you can delete the file you moved to the desktop. This should not delete any photos, but will reset iPhoto as if it's the first time you are opening it (so your preferences you set may need to be set back).
If this doesn't work, let me know.

Songs stop playing on my iphone I try to start it again and it will not play for more than 2-4 seconds, does anyone have the solution to this problem?

I have Imatch and songs stop playing on my iphone I try to start it again and it will not play for more than 2-4 seconds, does anyone have the solution to this problem?

By "hard reset" you mean hold down the Home and power buttons until the iOS device restarts, correct?

TEXT AREA - Not able to display contents more than length 4000

We use textarea item to display contents of xml .
But if the content is of size more than 4000 , we are not able to display it in text area.
Any suggession / workaround for this .. please help.

A simple workaround is to write a function returning this text and use "PL/SQL Function Body" as a "source type" for this textarea. This way you edit text up to 32kB (limit of HTML input item)

Add row not working if more than 5 records are displayed on the screen

Hello all,
Does anyone know why the add row button on an sql updateable report would stop inserting a blank row for data entry when more than 5 records have been entered into the form? I can insert up to 5 records. After that, a blank row is no longer supplied by the button. Odd. Have any ideas?
Any assistance would be greatly appreciated!!!
Michelle

You're welcome, Michelle!
The "Maximum Row Count" setting determines the maximum number of rows Apex will, or could, retrieve for a report. In your original settings, this was only 15, so matched the numbers of rows on a page - therefore, you would (A) only have one page of records and (B) never see a "New Row" as that would be record number 16 (or something higher than 15), which Apex would ignore!
One thing to note, though, is that some of the pagination schemes (the ones with a "Z" in the description) will count the full number of records available every time the report is loaded - for small tables, this is not an issue but for large tables, you may want to use one of the other schemes.
Andy

How to enhance table control in DMS. Need to display doknr more than 25 cha

Hi there.
In transaction IL03 - document tab - I need to display a doknr which is longer than 25 characters.
I search for exit/enhancement for DMS - saplcv140/control SUB_DOC, but cant find anything.
If it is not possible to enhance this field, i would like to add a new field (more than 25 char) and fill in the long doknr.
The documents that are attached contains both an internal docnumber(from the external system) and an external docnumber (functional location type of number). It is very important to show external documentno in the table control.
Actually in the table DRAW the external dok number is in the field MRK_FILEP. Can this field somehow get in the tablecontrol?
Anybody has experience with docno longer than 25 characters? Or how to enhance tablecontrol sub_doc (screen 0204) in fuction group CV140.
Br,
Liselotte.

The BAdI CRM_BADI_RF_Q1O_SEARCH is for enhancing OneOrder based searches. Not for business partners.
The BAdI CRM_BUPA_IL_SEARCH is the way to go. I just checked in our system.
In the method SEARCH_CRITERIA_INITIAL check if your field is supplied in IS_PARAMETERS. If yes return CV_IS_NOT_INITIAL = 'X'.
Then in SEARCH_PARTNERS you delete the entries from table CT_PARTNER_KEYS according to your parameter.
However this is not very performant. If you have a search with criteria only of your own for the BAdI SAP coding will first select everything and then you filter out.
Anyway, it is much faster to implement than a new search...
cheers Carsten
Edited by: Carsten Kasper on Nov 18, 2008 7:44 PM

How to check customer reference no. not being use more than once

I have the following situation and appreciate if some one could show me a simple solution.
On the Sales order window, when user enter a value for Customer Ref. No, check if the entered value has already been used on any existing Sales Order, and give message eg. this Ref. No already been used in SO. 257
What is the easiest way of implementing the validation?
Using Formatted Search?
Triggers or Stored Procedure?
Or one must go about doing this simple task using SDK, DIAPI?
sample code illustrating solution would be much appreciated.
I tried to create a query and used it with Formatted search on the Field, but failed on an error.
the code using temporary hard coded value instead of $[$x.0.0] looks like this
if (SELECT    COUNT(*)
FROM         dbo.ORDR
WHERE     (NumAtCard = 'AAA' and CardCode ='1234')
) =0
     Begin
                   select 'AAA' --redisplay value
     end
else
              begin
SELECT     TOP 1 'already used in SO '+ Convert(Char(3),DocEntry)
FROM        dbo.ORDR
WHERE     (NumAtCard = 'AAA')
         end
where 'AAA' is the reference no. to check for customer '1234', this code works when I run it in SQL query analyser, but failed when I run it as query in Business one. the idea was to redisplay the entered No. 'AAA' if it is not found in any existing SO for cust ='1234'
can anyone point out what the error is or show alternative code for the query.
thanks

Hi Andy,
I believe the best way to do this is probably to use the SDK as (to my knowledge) this is the only way you can get a message to be displayed and to stop the actual processing of the document.
If you want to go the formatted search route I would suggest you change your query a bit. I have played with your query and the following is an example as I got it working in SBO. I think SBO gets confused if there is more than one select statement that returns a result and I have started using variables to save the results of the select statements in.
[code]Declare @Val varchar(100)
declare @Count integer
set @Val = $[$14.0.0]
if (SELECT COUNT(*) FROM dbo.ORDR WHERE (NumAtCard = @Val and CardCode = $[$4.0.0])) > 0
begin
SELECT TOP 1 @Val = 'already used in SO '+ Convert(Char(3),DocEntry) FROM dbo.ORDR WHERE (NumAtCard = @Val)
end
select @Val[/code]
I hope it helps a bit,
Adele

How to display TEXT more than 500 char in a report as multiple lines.

Hi Friends,
i have a requirement like i should display Texts of length more than 500 Characters in a report( ALV LIST) as multiple lines
I am fetching the data Using FM READ_TEXT
the output im currently geeting with 150 Char in lenth as a single line
How we can split the text into multiple lines in a report
first i would like to know is it possible? if possible please give your valuable suggitions if not is there any alternative way to do this task.
Thanks & regards
kumar.

Hi,
This is possible but the Solution might not look Standard/Appropriate to you.
In ALV, you can have Multiple Line Output...There is a Field in the Field Catalogue..called as Row_position...this is by default 0...which means Single row/Line ALV output....You can have this Value in the Range of 0 to 3.......A ALV field with row_position 1, will be displayed in the second line for every record...i.e. you will have multiple line for a single record of ALV.
In your case......you can use this but you need to split your field in two fields.....but you may end up spliting a single word....but for that also you can design the logic of splitting the Fiel value at SPACE only......
This may work.......and Sorry if not work......

Not displaying reciepents more than 10

Similar Messages

Maybe you are looking for