Not Displaying the vendor changes

Hi,
When i am confirming the vendor in FK08, normally it has to display the changes. but for me some of the vendors am able to see the changes before confirming, some of the vendors am not able to see the changes before confirming.
Please tel me what would be the problam

if u enter in to fk08, the system shows the vendor and co.code, u drill down the button beside the vendor ccolum.then u can able to see allathe vendor accounts, u dn"t give the co.code.

Similar Messages

  • Some PDF files and other emails do not display the whole page. Is there a way to change that?

    Some PDF files and other emails do not display the whole page. Is there a way to change that?

    If an app does not behave as expected, try closing the app completely and reboot the iPad. It appears as though you have the original iPad. It helps if you list your iPad model and the iOS that you are running.
    Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Firefox is not displaying the correct font color on my blog, but other browsers are.

    I have a web designer issue. Firefox is not displaying the correct font color on the header in my blog. Explorer, Chrome, and Safari have no problems. The page is in css but this particular section has html code o designate color. The code is as follows:
    <font face="helvetica" color="FF9966" size="1">blog</font>
    Though all other browsers display the light orange color designated, Firefox displays white. Strangely, if if retype the code by spelling out a color, Firefox displays it correctly. i.e.
    <font face="helvetica" color="black" size="1">blog</font>
    ... will give me black. You can see the effect by viewing the link below and looking at the word "blog" in the header, which should be light orange but is not in Firefox.

    Actually it also seems to work in the current Firefox 4 beta as it is.
    The code is not right though - the correct syntax for the color attribute with hex values is with a # at the start, so:
    color="#FF9966"
    It might work in Firefox 3.x if you change that.

  • IPhone is not displaying the name

    Once I receive the calls my iPhone is not displaying the name only the number
    <Re-Titled By Host>

    Sorry guys , but I got it .
    I went to calendar app. And the tapped calendar , and pulled the screen to refresh it.
    Thereafter  the  synch is in terms of the sequence of my list as well.
    Now any change in the sequence of cards on the iPhone is followed by the same on the iPad , via the cloud ,!!

  • JComboBox is not displaying the down arrow..

    jComboBox is not displaying the down arrow..
    I was first using the "choice" component but was having problems with the size only on Unix. So I changed it to a jComboBox and I'm having problems on both NT and UNIX. First the down arrow doesn't show up on NT....and the drop down doesn't even show up on UNIX.
    Any ideas?
    Thanks!
    pt

    could be coz you have not left enough room for it on the layout of your JPanel?

  • HT5364 Safari is not displaying the web page content & Crashes on clicking Security Tab in Preferences!

    I have Mac 10.8.4 with Safari 6.0.5.
    Safari is not displaying the web content but images on the web page are being displayed.
    Although the webpage is loaded, but nothing is shown else than Images. When I hover the mouse on the blank webpage shown, the cursor changes on the links on the web page.
    I tried resetting the preferences from the menu as well as deleting the Preferences of Safari from ~/Library/Preferences/ but nothing helped.
    When I open Preferences of Safari & click on Security tab, It Crashes!!
    Thanks,
    Shubhi

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Image content type in Site Asset Image library: The Preview and Thumbnail Preview columns do not display the picture of the item.

    I have two different Site Asset libraries.  The Site Asset Picture library has items of
    content type picture.  The Site Asset Image Library has items of
    content type image. 
    1) I do not quite understand the different between a picture content type versus an image content type. 
    2) the thumbnail and preview columns do not display the image in the Site Asset
    Image Library.  (the image does display in the thumbnail column of the Site Asset Picture library.)  I expected the image to display in the Site Asset Image Library the same as it does in the Site Asset Picture library. 
    Why doesn't it?
    Betty
    Betty Stolwyk

    I have subsequently found out that our "Site Asset Images" library is a Document Library to which someone must have replaced the Document content type with an Image content type.  I also found out that picture previews/thumbnails cannot be displayed
    in Document libraries.  So the problem was the library type, not the content type.
    So I simply created a new Picture Library (whose content type = picture) and copied the files into that and the thumbnails displayed just fine!
    I bet what led to this is the default "Site Assets" library that is created for a new Team site.  It is just a document library but sounds very similar to the "Assets" library.  I can imagine someone thinking the "Site Assets" library was a standard
    container for images, and simply changed the name to better identify the content! 
    As far as 'image' vs 'picture' content types, I noticed that a new Picture Library contains a content type of 'picture', but an Asset Library contains a content type of 'image' (as well as audio and video).  Although the 'image' content type has a few
    more fields than the 'picture' content type (picture content type does not have thumbnail), the actual Picture Library contains pretty much all the same fields, including the thumbnail.  So for all practical purposes, either library type can be used for
    storage of pictures.  I am guessing that the Pictures Library which uses the picture content type is for backwards compatibility purposes, and that the 'image' content type is newer, being derived from the new "Rich Media Asset" content type and used
    in the new Asset Library which can hold audio and video in addition to pictures.  
    Microsoft Help also mentioned that a Picture Library has a slide view which an Asset library does not.  So my take on that is that if you want the potential of seeing your pictures as a slide show, put them in a Picture library which is still using
    the 'picture' content type of previous SharePoint versions.  If you want to keep pictures organized with audio/video files, then put them into an Asset library which uses the  'image' content type derived from the new Rich Media Asset content type.
    Betty Stolwyk

  • Printer preview do not display the newest PO form

    Hi experts,
    I have encountered a problem in SRM EBP. When I changed a PO form's delivery address, and then print
    the preview button, the pdf outputer do not display the newest PO form with the updated address, instead
    with the old address. While if I wait for about 1 hour or just reenter the display po menu, the preview
    displays the newest PO form. So my question is does it because the program which calls the smartforms
    read data from cache? And when a smartform is used in a web application, can I just set some attributes
    of the form to avoid the problem? Thanks in advance.

    Hi Michael,
    Thank you for your answer.  I have debuged the calling form process, the actual situation is wired.
    When I changed the ship-to-address on the web, the adrc is updated immediately. But the connection
    between the po and the ship-to-address is not updated. So the output preview just do what it should do,
    read data from the database then display it.  My question is why when the adrc is updated, then
    connection between the po and the ship-to-address is not updated immediately, and when is the exactly
    time that the connection can be updated.

  • My firefox page is not connecting to network and also its not displaying the troubleshoot problems option?

    my firefox page is not connecting to network and also its not displaying the troubleshoot problem option?

    At the very least, I recommend you restart your router, (your internet box).
    More detail on your problem is needed - are you in a submarine? On the moon? On a tropical island?
    You can help yourself by providing as much info as you can about your present situation - what kind of router do you have? Have you moved it? DId you update it?  Did you do anything to change your setup, and if you did, what?

  • View the .rtf file not display the data in BI Publisher Enterprise.

    Hi,
    Platform: OBIEE 10g in NT XPsp2
    View the .rtf file not display the data in BI Publisher Enterprise.
    Step 1, I created Answer-request, create .rtf file with Word and add the request name, Add bar chart and table, preview PDF is working fine with data, Upload this template to Answers, View Template from Answer is working fine with data.
    Step 2, Answers – More Products > BI Publisher > My Folders > Create a new report > Edit > Data Model > New > Type: SQL Query > Data Source: Oracle BI EE > Query Builder > from SupplierSales assign Customer, Periods, Sales Facts (select Region, state, Year, Units Shipped) > Results > Save > Save
    Click Layouts > New > enter Name ….. > Click Layouts > borrows .rtf file in Manage T file > Upload > Save > Click View
    It is showing only the .rtf file without data. Why there is no data?
    Please guide me to solve this issue.
    Thanks,
    Jo

    Thanks for you reply,
    Our scenario is this report is basically a dissconnected mode report... we are developing these reports for mobile clients.
    We dint face this kind of issue while developing other reports.
    So please let us know if you have any idea on why we are facing this issue.
    Regards,
    Maneesh

  • Strange scenario,Oracle can not display the data in mysql correctly

    I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
    -------mysql------------
    mysql> create table tst(id int,name varchar(10));
    Query OK, 0 rows affected (0.00 sec)
    mysql> insert into tst values(1,'a');
    Query OK, 1 row affected (0.00 sec)
    mysql> select * from tst;
    ------------+
    | id | name |
    ------------+
    | 1 | a |
    ------------+
    1 row in set (0.00 sec)
    mysql> show create table tst\G
    *************************** 1. row ***************************
    Table: tst
    Create Table: CREATE TABLE `tst` (
    `id` int(11) DEFAULT NULL,
    `name` varchar(10) DEFAULT NULL
    ) ENGINE=MyISAM DEFAULT CHARSET=utf8
    1 row in set (0.00 sec)
    -------------oracle ------------------
    SQL> select count(*) from "tst"@mysql;
    COUNT(*)
    49
    SQL> select * from "tst"@mysql;
    id
    1
    SQL> desc "tst"@mysql;
    Name Null? Type
    id NUMBER(10)

    You can make the following query on the result page:
    "select * from the_table where movietitle = ? and cinema = ?"
    then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
    Below is the sample code, it assumes you have a connection to the database:
    PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
    stat.setString(1, usersMovieTitleSelection);
    stat.setString(2, usersCinemaSelection);
    ResultSet res = stat.executeQuery();
    if (res.next()) {
    out.print("The movie is available");
    } else {
    out.print("The movie is not available");
    }Now just add that to your JSP page. Enjoy ! =)

  • I have installed iOS7 on my iPhone4. I am able to add/edit contacts by clicking the "contact" icon. But when I am trying to do the same after clicking the "phone" icon, it is not displaying the keypad. I believe it is a bug in iOS7. Please confirm. iPhone

    I have installed iOS7 on my iPhone4. I am able to add/edit contacts by clicking the "contact" icon. But when I am trying to do the same after clicking the "phone" icon, it is not displaying the keypad. I believe it is a bug in iOS7.
    Please confirm.
    iPhone 4, iOS 7

    Hello jayanand,
    You may need to force close all open apps, then restart the phone. If necessary, you may need to reset the phone after that.
    iOS: Force an app to close
    http://support.apple.com/kb/HT5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Cheers,
    Allen

  • HT2500 How do I not display the preview pane in mail until I open it with a double click? Some mail I do not wish to open-just delete it.

    How do I not display the preview pane in mail until I open it with a double click? Some mail I do not wish to open-just delete it. New macbook pro with LION OS

    Just drag the divider line between the preview pane and the message list all the way to the edge so the preview is completely closed. Selected messages will open in a new window with a double-click or the return key.

  • App Store shows update available but will not display the update or tell me that there are no updates...

    There is a badge with the number 1 on my "App Store" icon, but when I go to see what needs to be updated, the App Store does not display the app that has an update nor does it say that there are no updates available.  Basically the place that tells me these things, is completely blank.  I have the word "Updates" at the top of the screen and I can see an icon on the bottom right corner area that has the cirlce with a down arrow and the word "Updates" with a badge with the number 1 in it. 
    The iPad 2 has 6.1.2 for the iOS.  I have already closed the app out completely by closing the app in the multitasking section and then restarting it.  This does not correct the issue.  I have also restarted the iPad 2, however this did not correct the issue either.
    If anyone has seen this and knows it is a glitch in the software, and that Apple is aware of it, please let me know.  If anyone knows how to correct this, please let me know.  Thanks.

    The update server is down; try this temporary workaround
    App Store>Purchased>Select "All"
    Note: Look out for apps that have the word "Update"
    http://i1224.photobucket.com/albums/ee374/Diavonex/9c256282736869f322d4b3071bbb2 a82_zps51a6f546.jpg

  • How can I display the vendor associated with result of my running total sum

    I have a report that lists vendors with their most vecent order dates.  I need to set up a rotation so that the vendor with the latest order date is next to be selected.  I used the running total summary to pick the latest date.  How can I display the vendor associated with result of my running total summary?

    If your "latest" order date means the "oldest" order date, why don't you try this:
    Go to Report tab -> Record Sort Expert -> Choose your order date in ascending order
    This will make your oldest order your first record shown. 
    You can then create a running total count for each record.
    Lastly, in your section expert under conditional suppress X+2 formula, write this:
    {#CountRecords}>1
    The result will only show the oldest record in your report.
    I hope that helps,
    Zack H.

Maybe you are looking for