Not enough disk space to render?!?!?

Trying to render my project, I'm getting the error message 'insufficient disk space for render - free up space before continuing'...
Thing is, I'm saving it to my external drive, and, at present, this has 310gb available!
Surely it won't need more than that?!?! I'm trying to resize the footage, about 25 mins of footage...

It sure sounds like your drive is formatted as FAT32.
Regarding the RAID setting, if you did not set up a RAID set, the 'settings' under the RAID button are irrelevant. And anyway, you wouldn't have a RAID set with a FAT32 drive, much less a single FAT32 drive.
I think you have two problems - 1) the drive is not formatted properly - needs to be Mac OS Extended and 2) your cam & external FW drive attached at the same time - I think you have a Firewire conflict between them.
But you have to fix the formatting first. Be sure to back up anything you need to keep because formatting will completely erase the drive.
Finally, not to alarm you, but regarding your internal drive, with only 4GB left you are dangerously close to crashing your system if that drive fills all the way up. You need to get stuff off that drive. You should really keep at least 15% - 20% of your system drive empty at all times. OSX needs that room to operate.

Similar Messages

"Not enough disk space" when there seems to be

I'm a newbie to iDVD and iMovie (my last Mac was a Performa 6360--still using it for the family budget) and got my daughter a MacBook as a graduation gift. She is using it to combine movie inputs from a wedding/reception that come from digital camreas and a couple of video cameras. We went to Flip4Mac to get the necessary features to import .wmv files (only way we could download one of the vidoe cameras).
Issue: When she tries to import vidoes already on her computer, she gets: "The file could not be imported: There is not enough disk space to import Macintosh HD/Users/julie/pictures/iPhoto Library/Originals/2007/Roll8/CIMG1442.AVI"
Basically the question is how to get more room on her disk to import and to save? She seems to only be able to Save--she can't Save Project as an option because it says she doesn't have enough disk space (she's deleted the trash). Help says you need to have more than 400mb of free space or it gets difficult but the indicator shows 28.8GB free space left...so there seems to be some kind of disconnect?? (Or maybe we're talking apples and oranges?)
On top of that, she also gets the same error message when she tries to burn the project onto a disk???
I went through the first 5 pages of the forum and couldn't see a similar problem, but then I may have not known what to look for?
Any help would be greatly appreciated...she's trying to give the DVD as a Wedding gift--somewhat belated.

I'm a newbie to iDVD and iMovie (my last Mac was a Performa 6360--still using it for the family budget) and got my daughter a MacBook as a graduation gift. She is using it to combine movie inputs from a wedding/reception that come from digital camreas and a couple of video cameras. We went to Flip4Mac to get the necessary features to import .wmv files (only way we could download one of the vidoe cameras).
Issue: When she tries to import vidoes already on her computer, she gets: "The file could not be imported: There is not enough disk space to import Macintosh HD/Users/julie/pictures/iPhoto Library/Originals/2007/Roll8/CIMG1442.AVI"
Basically the question is how to get more room on her disk to import and to save? She seems to only be able to Save--she can't Save Project as an option because it says she doesn't have enough disk space (she's deleted the trash). Help says you need to have more than 400mb of free space or it gets difficult but the indicator shows 28.8GB free space left...so there seems to be some kind of disconnect?? (Or maybe we're talking apples and oranges?)
On top of that, she also gets the same error message when she tries to burn the project onto a disk???
I went through the first 5 pages of the forum and couldn't see a similar problem, but then I may have not known what to look for?
Any help would be greatly appreciated...she's trying to give the DVD as a Wedding gift--somewhat belated.

"Not enough disk space" when there seems to be (+ rapid memory consumption)

[Note: I originally posted this in the iDVD section, but due to an answer I got there to another question and further conversations with my daughter, figured out this is probably an iMovie question?]
I'm a newbie to iDVD and iMovie and Forums (my last Mac was a Performa 6360--still using it for the family budget). I got my daughter a MacBook as a graduation gift. She is using it to combine movie inputs from a wedding/reception that come from digital camreas and a couple of video cameras. We went to Flip4Mac to get the necessary software/features to import .wmv files (only way we could download one of the video cameras was by going from PC to Mac--can't remember if it was a Sony or Canon).
Issue: When she tries to import vidoes into iMovie HD 6.0.3 which have already been transferred to her computer, she gets: "The file could not be imported: There is not enough disk space to import Macintosh HD/Users/julie/pictures/iPhoto Library/Originals/2007/Roll8/CIMG1442.AVI" [She says this is about a 4 min. clip.]
Basically the question is how to get more room on her disk to import and to save? She seems to only be able to Save--she can't Save Project as an option because it says she doesn't have enough disk space (she's already deleted the Trash). Help says you need to have more than 400mb of free space or it gets difficult but the indicator shows 28.8GB free space left...so there seems to be some kind of disconnect?? (Or maybe we're talking apples and oranges?)
[Even more disturbing, just in the last couple of days with only a little time spent on the computer, the 28.8 GB has dropped to 2.3GB--obviously there is something she is doing that she is not aware of or shouldn't be doing that is consuming memory at a rapid pace.] On top of that, she also gets the same error message when she tries to burn the project onto a disk using iDVD???
I went through the first 5 pages of the forum and couldn't see a similar problem, but then I may have not known what to look for?
Any help would be greatly appreciated...she's trying to give the DVD as a Wedding gift--somewhat belated.

Hello Karstn Schluter,
This is fm's daughter who is havin ghte difficulites. at the end you tell me to try to answer 1-8 so i will try.
1- how can you tell if the avi is containing divx? or not?? do I need to just keep this in mind when importing these files
2- I have not brought in an external drive. I did try making my laptop computer a harddrive so I could import my imovie poject to my eMAC at one point, but it was not allowing me to do that either. Because I had to have it in DVD form or something
3- No I did not segment the internal drive....sorry How do you do that??? Right now I am trying to find out what is taking up all the memory and Hard Disk Drive space....i do not know how to do that either....Do you know how???
4-Yes I know flip4mac is for wmv....I guess what that question was emplying was that I also have wmv files that I am trying to import to imovieHD and that is not working either...I can get my avi to get into imovieHD, but not my wmv. files
5-THank you for the tip with the trash then another question to this one how do you delet projects that are taking up memory that are no longer in use?
6-Thank you for the tip...so then ignore the not enough disk space.....how can you alter the disk space so that you can save the project under save project as and not just save project?
7- Sorry my dad was miss informed I cannot import the wmv. files to imovie and I cannot import imovie to iDVD I only have transferred one and then all of the other files are not seen as movies so I can not import them?? Does that make since
8- When we were useing the Sony Camera originally we could not import the video to the MAC because it did not have the correct firewire cable and it would not been read onto the MAC computer. So, we have to buy the flip4mac equipment so that I would be able ot download the inoformation to the computer by a wmv.file dvd so we are having difficulites trying to import that file.
I hope these answers clear up the question a little bit more and sorry that your answers brought out more questions. Thank you very much for helping me. I was using a different program in my college class so changing to imovie and idvd has been a huge struggle for me. Thank you once again.

Clean Install G4 Dual 1 GHz-Not enough Disk Space Error? -SLOW USB copies

HELP puhleeeeze!
This seems to be an issue on various sites with no one being able to figure out what is the cause and a solution. One person stated his problem went away with a fullwipe and clean-reinstall of everything. But this is what I did already.
What is the reason for the "Not Enough Disk Space" error message when both my hard drives have gigs of space available. If I had hair I'd be pulling it out by now! When trying to copy a file to my 2 internal hard drives that have a lot of space available, but only by the USB port?!!
I have a Power Mac G4 Mirrored Door (MDD) Dual 1 GHz with a clean install of 10.5.8 from the Original Mac OS X Leopard DVD. Both internal hard drives are 60GB and 100GB. The hard drives were wiped clean with Disc Utilities and reformatted to Mac OS Extended (Journaled). The Power Mac only has the OS and a few music apps installed. Easily over 30 GB of space left on the the main G4 interal hard drive and about 75 GB on the other internal hard drive.
The error seems to only happen when I connect a USB flash drive to the USB port. I tried to copy a 50MB update to the desktop-"Not Enough Disk Space" error message happened.
I know that the G4 MDD Power Macs only have USB 1.0. Is this a USB 2.0 issue? Another issue is that it has very slow USB speed (dramtically slower than normal USB 1.0 copying of files. And this is only when it is successful. Is it a USB format issue? I know I couldn't get an external USB 2.0 drive to mount on the Power Mac at all. Disc Utilities could see it but it still would not mount. I have a friend who has an older G4 single processor Mac that doesn't experience these issues with its USB 1.0 ports.
Now here's the kicker:
If I put in a CD disc in the DVD/RW drive, it copies with no problems to either hard drive. If I connect to the Power Mac via the ethernet network, files can copy with no problems. But any USB connection - I get a the "Not Enough Disk Space" error message. I know this is an old mac... but it's never been problematic until this latest wipe and update to Leopard 10.5.8.
Is there a solution to this? Any and all help, feedback, comments, thoughts are greatly appreciated in advance!!!

Hello everyone,
Ok, I did the ultimate task. I erased the hard drives, AGAIN. Just to start fresh from scratch. Hard drives were erased. Did a new install of Mac OS 10.5. And all was well. I could copy with no problems. I gave the computer to my friend and all was good for a couple of days and then the issue came back again. He couldn't copy anything to his internal hard drives and we received the "Not enough disk space" error message! I was baffled. A complete hard drive erase 2 times, 2 fresh Mac OS 10.5 installs and it works for a few days and then coping to HD we got the same **** problem again! THEN - I remembered that the PRAM battery was dead on this G4 Mirrored-Door Dual 1GHz PowerMac. I had recommended that he get a new battery, because this computer would always have the incorrect date and time after every restart. So with recalling this, I had him reset the PRAM by holding down the CMD+OPT+P+R keys after a restart (start-up Chime). I had him hold the keys for at least 3 start-up-chimes. Soon as the G4 Power Mac started up everything was fine again. He was able to copy files to his hard drives again with the "Not enough disk space" error message.
So everyone! Try zapping your PRAM (resetting the PRAM) and see if this solves your problem. I told my friend to get a new PRAM battery to replace the old one that is completely dead. I have not heard back from him. I will ask him again if the problem has come back.
If that fails: My only other solution would be to consider that it is possible that Mac OS 10.5 has a conflict or issue with the G4 Processors and maybe it is safer to install Mac OS 10.3 or 10.4. Because this problem only has occured after installing Mac OS 10.5, the highest version of the Mac OS the Dual 1GHz Mirrored-Door G4 can be installed.
Cheers,
B

Not Enough Disk Space In Target Folder PLEASE HELP!

I've produced a project with 10 menus and 21 tracks totaling 3.1 gigs and I can not burn it. Each time I get the remark "Not Enough Disk Space In Target Folder." I have 8.8 gigs on my internal harddrive and various externals.
PLEASE SOMEBODY HELP. I fear I will seriously threaten my job if I can't get this done tomorrow.

Hi
Select just Build and check the destination location and set a drive with enough space. Then you can burn using that build.
I have 8.8 gigs on my internal harddrive and various externals.
How big is that drive?
Hope that helps !
Alberto

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

Janet.b wrote:
About 3 years old...pretty dated now I guess. Am thinking I may just need to have it upgraded by a Mac tech.
For what the Apple Store's charge you can buy almost buy a new computer.
Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
I did the drive replacement myself, got a faster drive of better quality for $300 instead.
Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
So you see what's going on here.
I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
They can offer more personalized care which you need. Clone your old drive to the new and everything.
With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine.

Project/Library will not relink due to "not enough disk space"

I have a large library/project that was copied from one drive to another so I could take it to a different site/computer. When I open the project, I need to re-link the footage. FCP finds and verifies all the footage, but when I select "re-link", I get the following error: "There is not enough disk space available at the selected destination. Please choose another one or clear some space."
I've checked the project properties and they appear to be looking at the right event. The library and all the footage is on a huge drive with almost a terabyte free.
I'm not sure why I should even need additional space just to re-link to existing footage.
Thanks in advance for any guidance in this matter.

You should do this from inside FCP. Only copy libraries from one drive to another in the Finder if you're using managed media, which it doesn't sound as if you are. I'm kind of guessing a little here because I'm not clear on exactly what you did for the media.
In FCP make a new library on the drive you want to copy to. Select the project and in the inspector assign a location for the media, either managed media or external media in a folder. I like to use managed media for this, because I can always consolidate the media into a separate folder very quickly. Once you've made the new library, inside FCP copy the contents of one library into the new library. When that's done confirm that the media has been copied to the correct location. If necessary run the consolidate function to make sure all the media is correctly located.

Error msg: Sending of password for user did not succeed. Mail server responded: Not enough disk space - what's the deal?

I've been checking my email via webmail for a week and am back in the office today. Fired up Thunderbird, expecting it to pick up all my email, but it gets nothing and tells me…
Sending of password for user [email protected] did not succeed. Mail server pop.ipower.com responded: Not enough disk space
Haven't seen this particular error message come up in searches via google and at mozilla. There's definitely disk space on my machine. I'm running TB on a Mac (OSX 10.6.8). Disk Space options under Preferences > Advanced let me assign up to 1024 mb for the cache, which I've done, and cleared.
Has anyone encountered this before? Got a solve/troubleshooting process? Thanks!

Thanks. I do compact regularly (TB prompts me to) and did it (several times) via Preferences today to try and get TB past this error message.
Also went thru and Trashed + Empty Trashed as many messages as possible from the inbox, just in case. Still no-go.

What does error message when trying to burn DVD from iDVD mean "not enough disk space to burn the remaining assets"

I created a DVD in idvd and now when trying to burn to DVD using external burner, I get the error message
"not enough disk space to encode the remaining assets". I am using a brand new blank DVD.
I have read the help info on computer but hasnt proved helpful.
Any suggestions?

iDVD requires a fair amount of disk space to carry out the encoding process; depending on your project, you may need to have over 25 GB free space on your startup hard drive. How much free space do you have?

Keep getting Failure to Compile Error for Not Enough Disk Space

I have burned this dvd once already, made a few changes and went to build again and it keeps telling me there's not enough disk space to compile assets. There is over 15GB of free space for a 2.8GB project, what am I doing wrong?
Any help would be great, this is a wedding gift and Im running out of time!!!!

15Gb isn't all that much, really - especially if you are making a DL disc. In order to create the files necessary there needs to be enough space for the final output, plus the same again for the build files, plus enough temporary space and room for encoded media and so on. If your project is 8Gb in total, you won't have enough space with 15Gb free!
Try to clear another 5Gb and make sure all of the space is on an internal drive, then have another go.

Disk permissions/not enough disk space Warnings

When trying to export tracks, on one system we use, (using an External FW800 1tb HD) with only about 50gb used, after I hit EXPORT on the menu, It tries to write, then I get a disk permissions warning/not enough disk space. ALl the permission on my disk are set to read and write. Anybody?

sorry for the multiple posts... First two tracks exported fine, then the third track generated the error again. I discovered that track had a / in the track name, which meant the files had a / in the name. Removed the slash by renaming the track. BINGO, problem solved. files on computers can't have / in the file names right... beware of the other characters not allowed.
Hope this helps someone.
Steve

Problems saving pdfs in IE "not enough disk space"

After updating Adobe Reader from 9.... to Adobe Reader X 10.1.23 I cannot save a pfd file opened with a browser, wether using Internet Explorer 8 nor the actual firefox. The error message is something like .." not enough disk space" , what's not right!!!
I reinstalled 'Reader X - no solution
I deinstalled Reader X and installed the old Version 9 - saving is no problem!!
What can I do ??? Thanks..

when you make a dvd using dvdsp, you need to build it on a local drive before dvdsp can burn the dvd. So more than likely, .... there's "not enough space" on that drive.
You should always have a minimum of 10% free space on ALL drives and at least 20% free space on your startup drive. Having less space can create all sorts of problems and the data on the drive can get corrupted and unusable.

Windows Easy Transfer, not enough disk space

I am trying to transfer my files and settings from old WinXP to new Win7 PC, using Windows 7 Easy Transfer. I am using the network transfer option on my home network. The wizard is pretty straightforward and all went well until I clicked Transfer. I got
an error message that said not enough disk space. (It did not say which PC.) The transfer size is 32 GB, but I have 550 GB available on Win7. The XP PC has only 10 GB free, but why should that matter?
And yes, the Win7 PC is marked as the "new" computer.
Thanks for any suggestions.

Hi,
May I know how many drives you transferred?
Windows Easy Transfer maps the old computer drives to the new computer drives while transferring data. In other words, information on each drive on your old computer
will be transferred to the respective drives on your new computer. Therefore, if the size on the other partition doesn't have enough disk space then we come across the error: "Not enough hard drive space available"
I recommend the following two suggestions.
1. Click on Advanced when transferring files from the old computer and select the only files and settings that you want to transfer, if other partitions are selected
make sure to uncheck them if it’s not required for you to transfer.
2. Try to transfer one partition data at a time and check.
Once the transfer process is successful or failure, you can anytime view Windows Easy Transfer Reports to know the details about the transfer.
To open Windows Easy Transfer Reports
http://windows.microsoft.com/en-us/windows7/transfer-files-and-settings-from-another-computer
Best Regards,
Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

This message may contain a virus or there is not enough disk space. Skip this message?

I have been randomly getting the following message for example for the past couple of weeks and it seems to be getting worse:
There was an error downloading the following message:
From: Popular Science <[email protected]>
Subject: The Coolest Cars We Saw At The Detroit Auto Show
This message may contain a virus or there is not enough disk space. Skip this message?
I have also noticed that that there is an issue when I select the option to skip the message by selecting '''Yes'''. The body of a one message is replacing the body of one of the other messages that is downloaded (i.e. body of facebook message replacing body of message from amazon). This has been seen multiple times.
I am using Thunderbird ver. 31.4.0 on Windows 8.1 and the latest Norton Security with Backup software for my antivirus and all software has the latest updates.

Hi. Thanks for your prompt reply. The error message is generated in Thunderbird and not by my anti-virus software. It is also specific to one email account and does not affect the others.
I have around 40Gb unused space on my hard drive.
The From and Subject fields in the error message contain the sender's email address and subject header respectively (these didn't show in my original email)
I have also moved a lot of messages from mu inbox.
I have not changed my anti-virus software (and have been using the same package for years
Regards

There is not enough disk space to download new messages. How can I backup my old emails onto my hard drive to create room for new message?

When trying to download new email messages I receive an error "There is not enough disk space to download new messages. Try deleting old mail, emptying the Trash folder, and compacting your mail folders, and then try again." I have emptied my trash, removed all the junk, deleted about 1gig worth of email and im still having problems.
I have a ton of folders that I store all of my emails in, so that I can easily find older emails. This email has been working fine for me for about the pass 5-6 years and now I have problems. I would like to be able to back up my emails onto my hard drive so that I have them on hand. What is the best way to go about this? Because of my file structure I am not able to see all of my messages on one screen. Is there a way to select emails from a certain year?
Thanks in advance for any help or suggestions.

''Try deleting old mail, emptying the Trash folder, and'' '''compacting your mail folders'''
If you did not compact the folders after marking the messages for deletion, you have not deleted anything.
http://kb.mozillazine.org/Keep_it_working_-_Thunderbird

Not enough disk space to render?!?!?

Similar Messages

Maybe you are looking for