Not enough extra media . . . to create the transition (but there IS)
Any idea why I would get this message when the clip's on the Primary Storyline, and clearly has at least 25 seconds of footage spare on both adjacent clips?
It's 720p 50 XDCAM footage shot at 50 fps on a 25 fps timeline - and I've ditched the preferences (first thing I tried).
Andy
Tom, this may be irrelevant now, because I got it to work (See above) then did Cmd+Z to get back to the pre-transition state so that I could post the screen grab.
Andy
Similar Messages
-
"Not enough free space" for my music. But there is.
Long time iPod/iPhone user here, but first time encountering this.
Until now I've always had iPods with sufficient memory to hold my entire music library, but this time (to save money) I bought the 16GB iPhone 4S and for the first time I'm having to pick and choose what I want to carry around with me. So I created a playlist in iTunes and have selected to only sync that playlist.
But here's an oddity: the capacity bar on the screen in iTunes suggests I can put that playlist on with 1.43GB to spare. But when I try to sync the iPhone it tells me ther's not enough space. See screenshot below.
Any ideas?
Posted to both iPhone and iTunes forums.Hmm, changing the drive letter usually works if the ipod is reporting available space incorrectly.
http://support.apple.com/kb/TS1493
+iTunes and Windows Explorer report the wrong amount of available space on iPod.+
Your music library portion might only have 20GB, but what about podcasts, music, & photos? That could be the other 20GB it is saying it doesn't have room for.
Try syncing selected playlists and get it down to under 40 GB. You're right, you can't ignore it, but you can work around it. -
I created a DVD in idvd and now when trying to burn to DVD using external burner, I get the error message
"not enough disk space to encode the remaining assets". I am using a brand new blank DVD.
I have read the help info on computer but hasnt proved helpful.
Any suggestions?iDVD requires a fair amount of disk space to carry out the encoding process; depending on your project, you may need to have over 25 GB free space on your startup hard drive. How much free space do you have?
-
Importing a small motion movie into fcpx and I get this error "There is not enough disk space available at the selected destination. Please choose another one or clear some space" the destination is a new 6TB raid thats empty. I've created a new library on that drive and still get the same error! help..
Did you format your new drive to MAC OS Extended?
Al -
Created Custom Transition but cannot hear the audio in it, need Help!
Hi guys, I created a custom Transition for the dvd.
I set the transition but the audio is not in there with it.
How can set my custom transition with the audio?
Thanks,
ZiaBy custom transition, do you mean a video you created yourself in FCP?
Or do you mean a transition that DVD SP created? If it is this, then no, there is no audio on transitions. The solution is to create your own video that you then put in a track that then links to your main track. -
Why exchange rate is not displayed correctly when I create the PO in SRM?
Hi Gurus,
Yesterday I insert a new row at OB08 tx. at backend system (R/3) for exchange rate of May 17,2010, the value was 10.00. Then I run the BBP_GET_EXRATE program to replicate the info to SRM.
But when I created a purchase order (PO) the value was 12.24 for exchange rate (this value 12.24 is the value for the previous day May 16, 2010).
Today morning (May 18, 2010), I inserted another row at R/3 and replicated to SRM, the new value for May 18 was 11. I create another PO and the value was 10 for exchange rate (the value for yesterday).
But when the PO is transmitted to R/3, the exchange rate is the correct.
My question is: Why exchange rate is not displayed correctly when I create the PO in SRM? Exists an aspect of memory in SRM that it has to be refreshed? Why SRM is getting the exchange rate for yesterday? Is an issue for time zone?Hi Muthu,
I'm in Extended classic.
I already discovered what is happening. At the time of being creating the purchase order (PO), it takes the exchange rate of the delivery date of the shopping cart (SC). But when the order is authorized and tries to transmit it to R/3, it takes the exchange rate of the date of creation of the PO.
Two checks of budget exist:
1.- When creating PO (exchange rate date of delivery date of the SC's item)
2.- When authorized and tries to transmit it to R/3 (exchange rate date of creation date of the PO)
If exchange rate of delivery date of the SC is lower than exchange rate date of creation of the PO, there are cases in which it is marking budget error.
Now my question is: It is a standard behavior? (to take different exchange rate) -
My iPad and iPhone4s both state "NOT ENOUGH STORAGE" and can't backup due to not enough iCloud storage available in the cloud.
I have sync my phone to my pc using itunes, but I still get the msg on the phone - could it be that the ipad and phone both receive the same mail? I did go into Settings - icloud - and shut off Mail on phone - I will sync the iPad as well - both devices receive my mail as well as Acer pc.? thank you -Not having enough storage in your iCloud account isn't caused by using your iCloud email account on your device. It may be caused by having lots of email in your account though.
Go to Settings>iCloud>Storage & Backup>Manage Storage to see what is taking up the space in your account. -
Field avaialble in field catalog but not when I try to create the condition
Hi,
I wanted to add a new table to a delivery output. I need the fields delivery type/ship point and destination country. I could see that destination country (LAND1) is not available in the field catalog. I added it from the list of available fields (in KOMKBV2) and can see it in the field catalog but not when I try to create the condition table. What else do I need to get this field ?
Regards,
Hari.Also add your new field to structure KOMBZ
If you want to use a new field in the field catalog, you must add the field to KOMP or KOMK in the following INCLUDES:
- header data in INCLUDE KOMKAZ in KOMK
- item data in INCLUDE KOMPAZ in KOMP
When you use INCLUDES, the field is automatically added to KOMG and the field catalog.
The routines for assigning values to the new fields in order processing are found in member MV45AFZZ. Use the following user exits:
- USEREXIT_PRICING_PREPARE_TKOMK (header fields)
- USEREXIT_PRICING_PREPARE_TKOMP (item fields) -
There is not enough free memory to load the entire file
I saw an older reference to this error in a previous post which apparently got resolved, but didn't explain precisely how it got resolved:
Michael Kitzmiller, "There is not enough free memory to load the entire file" #, 27 Jul 2007 5:23 am
I presume that one answer is to rebuild the document from scratch, changing imported images to referenced images. But I want to recover the file as I put hours of work into it and expected that anything I can save that I also should be able to read back in. I will certainly change to referenced images, but I have to be able to open it first.
thank youWeb...
Here is a smattering of ideas.
Do you have ample unused HDD space? If not, defrag it, although in myu experience, this hardly makes a difference. Check your TEMP/TMP folders and clean them out. Consider downloading cCleaner and running it. Do everything you can to make ample room on your HDD and in places like your TEMP folders. If your HDD is congested, temporarily remove big but relatively unimportant applications and move data elsewhere for a while.
Even with 4GB of RAM, Frame can only use somewhere between 2.7 - 3.2 GB of it under the very best of conditions, and that includes the application as well as the files. Unpacking image files can consume considerably more space than it takes to store them. For example, a 1024 x 768 color image requires more than 3.1MB to describe it as a 32-bit color image, yet when stored in JPEG format, it can be as small as 50kB, a compression of 65:1. Of course, it's not reasonable to assume that your document is comprised entirely of such highly-compressed images, but in the unachievable extreme, it would take 980MB to simultaneously open 15MB worth of those kind of files. The point here is to not fall into the trap of thinking a 15MB file comprising a lot of images needs little more than 15MB of RAM.
Make sure ALL other applications are closed when trying to open your file...Outlook, IE or FireFox, Anti-Virus and Spyware apps, Word, etc.
Consider sending a copy of the file to someone else to see if they can open it for you and delete some of the images before resaving it. If you have a backup copy, rename your current file and restore the backup. Maybe your working copy is corrupt. Who knows? Anything is probably worth trying as long as you have a save copy stored somewhere.
Dennis... -
i am trying to unlock the iphone 4, aftermanual backup on the computer, i am trying to restore the backup, a message is showing up " itunes could not restore the iphone ' .....iphone ' because not enough free space is available on the iphone" but there is 5.7gb available
Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa -
Hello, I can´t active my iPad because appears the following mesage: "Not Enough Storage, This iPad cannot backed up because there is not enough iCloud storage available. You can manage your storage in settings". I did click on Settings but still locked.
Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should restart. This will have no affect on your data.
-
When I charge the battery, the screen has a massage show" Not Enough Storage , This iPad cannot back up because there is not enough iCloud storage available. You can manage your storage in setting" but the problem is my iPad screen is freezed .I can do any thing about the setting, Can I change my iPad setting from my computer?
Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release. You won't lose any data by doing this.
-
Not enough disk space available on the proxy
Wondering if someone might be able to shed some light here.
Trying to deploy a 16GB flar image, but it fails claiming there is not enough disk space on the proxy, however the proxy appears to have plenty of space in /var:
The error:
Task : Download Image
Task Run ID : 23076
Target : PC->ocproxy-6c657073
Status : FAILED
Result : Failed to download image + combo-S10-v149.flar
Logs :
05/01/2015 01:47:15 PM PDT INFO Task is posted to the Proxy Controller (ocproxy-6c657073), from the Enterprise Controller. (15011)
05/01/2015 01:47:18 PM PDT INFO Task is received by the Proxy Controller. (15012)
05/01/2015 01:47:18 PM PDT INFO ---enter into image task run----
05/01/2015 01:47:18 PM PDT INFO download image combo-S10-v149.flar:osFlarImage:,jsPostInstall.sh:osScript:,osp_status_firstboot.sh:osScript:,
05/01/2015 01:47:53 PM PDT ERROR Not enough disk space available on the proxy to download the file - /var/opt/sun/xvm/proxyImageCache/os/flars/combo-S10-v149.flar.
05/01/2015 01:47:53 PM PDT ERROR Image file does not exist - combo-S10-v149.flar.
05/01/2015 01:47:53 PM PDT ERROR Failed to download the url - /ImageDownload/FileDownload?fileName=/os/flars/combo-S10-v149.flar.
05/01/2015 01:47:53 PM PDT ERROR Failed to download image + combo-S10-v149.flar
root@ocproxy:/# df -h
Filesystem Size Used Available Capacity Mounted on
rpool/ROOT/solaris-1 98G 3.3G 68G 5% /
/devices 0K 0K 0K 0% /devices
/dev 0K 0K 0K 0% /dev
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 5.5G 1.7M 5.5G 1% /system/volatile
objfs 0K 0K 0K 0% /system/object
sharefs 0K 0K 0K 0% /etc/dfs/sharetab
/usr/lib/libc/libc_hwcap1.so.1
71G 3.3G 68G 5% /lib/libc.so.1
fd 0K 0K 0K 0% /dev/fd
rpool/ROOT/solaris-1/var
98G 13G 68G 17% /var
swap 5.5G 96K 5.5G 1% /tmp
rpool/VARSHARE 98G 2.6M 68G 1% /var/share
rpool/export 98G 35K 68G 1% /export
rpool/export/home 98G 45K 68G 1% /export/home
Any ideas?
-JDid you format your new drive to MAC OS Extended?
Al -
I BOUGHT 15gb of storage and it is not enough. I then bought the 25gb.Does this mean I have 40gb now or can I cancel the 15gb plan. All I need is the 25gb plan.
This should answer your question:
"If you purchase a higher-tier storage plan for your iCloud account to replace your existing storage plan (for example, a 20 GB plan to replace a 10 GB plan), the existing plan will be canceled and you will receive a prorated refund for the time remaining. The new storage plan is applied to your iCloud account and the annual payment date is updated to reflect the purchase date for the new plan." - https://support.apple.com/kb/HT4874 -
I did the fix but it didn't fix the issue. It allows me to create the script but when it runs it will not add the user account.
Here is all the same setting aside from the user info being created.
https://www.dropbox.com/s/kkxmhls3bfs6ns3/Apple%20Support%20Installer%20Script.p kg
Maybe you are looking for
-
When I open a pdf document from my dropbox to view it, the document appears blank, even though I know the information is actually there. This also has happened with pdf documents that have been e-mailed to me, then opened to view and they are blank??
-
On Windows 7. It was working fine right up to the point of the upgrade to iTunes 10.2.2.12. Once I upgraded and restarted my home computer, the Apple TV (Gen2) does still see the share name of my main home computer hosting the iTunes shared library
-
Bridge & Photoshop CS5, opening Photoshop files from Bridge
If I open Bridge in Photoshop CS5, & double click on a jpeg thumbnail in Bridge, it will not automatically open the file in Photoshop. Why? How can I change my settings so that the files selected in Bridge will automatically open in Photoshop when do
-
How to connect to SQL Anywhere db dynamically - No ODBC -
Hello all - We have an application (c++) with several reports (crystal 10) that are dynamically connected to several access databases depending on the users request. We are now moving that application to .net (c#) and SQL Anywhere 11. I am able to cr
-
Error updating LDAP properties: An internal error has occurred in the secLdap plugin
Post Author: kbd_vijey CA Forum: Authentication Hi, We are using Environment / Tools : BusinessObjects Enterprise XI R2 ,Sun Soloris 10,Active Directory. To Configure the LDAP, we have done from CMC - > Authentication -> LDAP. The below steps we have