Not enough memory error in Hyper-V

I have got and error tring to run Hyper-V in Windows Server 2012 r2. I have 2 gb of RAM and it says it is not enough memory. I used this official advice for Windows 8.1, http://support.microsoft.com/kb/2911380
, refused. In the it says, actualy, about DWORD that is 32 bit. I looked again in Regedit, the MemoryReserve value was gone. So I took my chances and create a QWORD (64 bit) value with the same name, and it worked. Unfortunaly, I had to reinstall the OS and
it does work. Tried thoose things several times, deleted and re-added all thoose values. Now I am confused, I wonder if there is any way to make Hyper-V to work?

You are below the required hardware configuration for running Hyper-V on Windows 8 or 8.1. You do not need a minimum of 8 GB. You need 4 GB.
http://technet.microsoft.com/en-us/library/hh857623.aspx
Hyper-V requires a computer with a supported 64-bit processor that has Second Level Address Translation (SLAT). For information about checking and changing the virtualization support settings of your system BIOS, consult your system manufacturer.
4 GB of RAM is required.
No, there is no way to disable this restriction. If you insist on trying this, you could try using something like VMware workstation or another Type-2 hypervisor that runs as a service instead of a bare-metal installation. Remember that when
you install Hyper-V on Windows 8/8.1, you are still carrying all the baggage of that operating system, and you are also adding the requirements for Hyper-V. Windows 8.1 requires 2 GB of RAM. Therefore, if you want to run a VM in addition to the
Windows 8.1 operating system, you will need more memory.
. : | : . : | : . tim

Similar Messages

A FIX for error message: When I try to open Snood (it's a game) I get this message. Not enough memory {Error # :: 0, in sound.cp@line 101 Can you help?

After years of playing Snood, w/o problems, I started getting this error message, on my iMac, OS 10.5.8,
with 4 GB of memory when opening Snood: Not enough memory {Error # :: 0, in sound.cp@line 101
My MacBook Pro w. Mac OS 10.6.8 did not have this problem.
Initially I thought that Snood raised its minimum requirement to Mac OS 10.6.
I had several correspondences with Snood. Their tech support is great. Quick and thorough responses.
They thought the issue was in Mac's system preferences/ Sound. It was.
I didn't realize that my sound input and output devices were gone.
The fix was resetting the PRAM. I found this advice on MacFixIt.com.
MacFixIt help with volume: http://reviews.cnet.com/8301-13727_7-10415659-263.html
Resetting the PRAM is on Apple support: http://support.apple.com/kb/HT1379
My sound (music!) is back, along with Snood. So glad I reset the PRAM before reinstalling the OS software!
Thank you to Snood, MacFixIt and Apple.
Happy new year all!

Good work, nice post/tip, thanks!

Troubleshoot not enough memory error

I am getting a not enough memory error, and while there are tons of posts about this on the forums, I had some additional questions. First, I have two cRIOs, and think the error may have been thrown by one of them. Is this even possible though? I'm trying to narrow down which exe the error may be in. Second, does anyone have an order of steps they take when they get these errors in order to troubleshoot them?
CLA, LabVIEW Versions 2010-2013
Solved!
Go to Solution.

Found the REAL problem! I was not reading my header correctly, this resulted in type casting the wrong bytes of data. Every now and then I would be type casting bytes of data that when type casted from a string to a I32 resulted in a number around 17 million. I am assuming the TCP read tries to malloc this memory (or new if its c++ ) and was unable to do so. That's why I got the not enough memory error. When I started reading my TCP bytes correctly, the error went away.
CLA, LabVIEW Versions 2010-2013

INTERNAL ERROR & NOT ENOUGH MEMORY error

Somehow 4 gig of memory is not enough!!
I am on Win Vista ultimate. intel Core 2 Duo 2.66 4 BG of
Ram.
And I'm working on a local hard drive with fat all else
running
I constantly get "Internal Error occurred...could not complete
request"
particularly alarming if that request was to save!!!!. I have
been using the 'fireworks autobackup" air app...save me heaps of
time...But its taking longer and longer to save the file as I work
on it.
If i save every 10 minutes !!!! its taking 1:20 to save..this
is 12% of my time...FW STILL sucks memory somehow..
any one with solution to this!!!???
Ive also had the "not enough memory" error a few times..In
which every thing done on the file is lost since last it was
opened...whether I saved it a million times or not. I've started
making copy backups and restarting FW every few hours to purge the
memory..but this sucks. This memory leak seemed to be mostly gone
in CS3 according to others so assumed CS4 had it sorted

One of our users is running across a similar issue using the
pen tool. A file that's 3000x2000 having sections cut out using the
pen tool will spike FW up to 2gig of used ram. Eventually the
Internal Error messages will start but, you can still trace your
path. The issue is it pops up every time you click a new point. The
only current work around I have for the user is to shrink the file
or decrease the dpi. Has anyone else run across this?
Specs
XP SP3
Core2 3.0ghz
4 gig ram.

P800 "Not Enough Memory" error when trying to use Contacts

Now even after I reset my P800 from iSync I get this 'Not enough memory' error when I try to use my contact list.
This is getting really frustrating! I want to downgrade...

I suspect it's the feed as I've just tried it and the latest episode fails. Try contacting the Podcast's producer/publisher to let them know, since they may not. From your linked page, click on their name and follow that to their website, where you should find contact details.
By the way, even if the problem is with iTunes, it's still down to the producer/publisher to rectify it, which is why I suggest you contact them
Phil

Not Enough Memory Error During Update

There is a new update for Ovi Maps 3.04 today. I tried to install it using the Software Update app and kept getting a not enough memory error. I even tried closing all programs, deleted a few apps I no longer use and restared my phone. Still I get the error.
Any suggestions?
<\
\>tuntman

Have a read of this thread as i suffered the same problem:
/t5/Maps-Navigation-and-GPS/E52-error-when-installing-ovimaps/m-p/751192#M27026

Export several Fuji X-Trans Files got "Not Enough Memory" Error

When I tried to export several (say 15) Fuji X-Trans files at the same time, I got a "Not Enough Memory" Error. This problem only occurred after after upgrading to Lightroom 4.4. I can now only export a few (3-5) X-Trans files at the same time. Does anyone encounter this problem and know how to fix it?
I am using Windows 7 32-bit with 4GB memory, SSD System drive, and Radeon 7700 Graphics card. For Virtual memory, I set "no paging file" on C drive and "system managed size" on another SSD drive.
Thanks in advance.
Wilson

One might expect an Export function is single-threaded so the number of files exported wouldn’t matter, but perhaps if you are very close to the limit, memory fragmentation comes into play, where LR is requiring contiguous blocks and there aren’t any big enough. It’s probably time to upgrade to a 64-bit Windows system and start getting used to the Metro interface which isn’t bad as long as your frequently-used programs have tiles on the first screen.
Go to Help / System Info… and see how much memory LR has available. On my 32-bit system with 4GB of RAM installed LR only has 716.8MB available which is typical for 32-bit Windows applications:
Built-in memory: 3327.0 MB
Real memory available to Lightroom: 716.8 MB
Real memory used by Lightroom: 160.5 MB (22.3%)
Virtual memory used by Lightroom: 160.8 MB
Memory cache size: 33.2 MB
You could change your VM settings to allocate a multi-gigabyte minimum pagefile size to see if it makes any difference, in case LR is waiting on the VMM to allocate more and then gives up, but I’d expect LR is requiring actual RAM for processing images, not VM which is much , much slower.

Not enough memory error when attempting export

Whenever I try exporting an 111Mb freehand file to a
pdf/gif/jpg/bmp/png I get a not enough memory error unless I set
the image quality to be very low. I am using Freehand MX 11.0.2 for
Windows. Does anyone know if there is asetting somewhere to prevent
this from happening?

> Whenever I try exporting an 111Mb freehand file to a
pdf/gif/jpg/bmp/png I get
> a not enough memory error unless I set the image quality
to be very low. I am
> using Freehand MX 11.0.2 for Windows. Does anyone know
if there is asetting
> somewhere to prevent this from happening?
Export and Import filters in FreeHand are not very good and
exporting large document as bitmap just can't be done. If you use
raster effects with high resolution export fails sooner or later or
at least takes even days.
To create a bitmap image I usually make pdf with Acrobat (the
only reliable way) and open it in Photoshop where you can define
dimensions, color space, etc. Photoshop opens some FreeHand created
eps and ai files too. Also Acrobat can export bitmap files.
Jukka

"There was not enough memory" error message when saving DNG and Jpeg

PC/Windows XP Pro. Pentium 4/2Gb RAM.
I am constantly getting memory errors when trying to save batches of images from ACR4 either as Jpegs or DNGs.
A couple of images in to the batch a small window appears with a list of the files and next to each of them is the line: "There was not enough memory."
These are 220Mb TIFF files that are processed in Hasselblad's Flexcolor on the same computer. I can process an entire folder full (sometimes 50 images) without a hitch in Flexcolor, but Bridge/ACR4 and CS3 can't handle any reasonable number of images.
Could it be something in my settings? For the record, they are:
In Bridge, under Edit/Preferences/Camera RAW preferences, Camera Raw Cache is set to 10Gb. Jpeg and Tiff handling boxes are both ticked.
Under Edit/Preferences/Cache, Cache Size slider is slightly over half way to the right.
In addition, I have CS3 pointed to a formatted 500GB scratch disk all to itself.
And CS3's RAM is set to 80%.
Finally, this computer is used for nothing else except image editing.
Any ideas?
Thanks.
D.

Thomas,
Thanks for the reply.
If you mean by "Public Beta", did I download the 10.4Mb plug-in (as per John Cornicello's link above) and install it at Program Files\Common Files\Adobe\Plug-Ins\CS3\File Formats in place of the old plug-in, then yes.
I always run ACR4 via Bridge, never via CS3. CS3 always comes after conversion in my workflow. Also, I like to give Bridge/ACR a free run of available resources. Nothing else is ever open when I'm running them.
In CS3 under Edit/Preferences/File Handling, under Image Previews I selected 'Never Save'. Not sure if this affects ACR though.
Also, as per the suggestion in the article referred to in my last post, I removed the tilde ~ to activate the Bigger Tiles plug-in. CS3's memory % is now set @ 90%.
The only thing I haven't done is to activate the Microsoft 3Gb switch. I can't find instructions that are clear enough. Also, it may be that it makes no difference when running Vista 64bit, as I am.
For what it's worth, with these fine tunings, CS3 now executes the Retouch Artist's Speedtest in 20 seconds, a shade faster than before. This is extremely fast, so my setup should not be the problem here. I hope! ;-)
Finally, is there any point in trying LR? Or is its file saving/cache setup the same as ACR's?
Thanks for taking an interest in my case. I'm very happy to be a guinea pig since I will constantly have to process large numbers of files and I'd like to overcome this problem
Many thanks.
D.

Cannot initialize Photoshop CS2 "not enough memory" error

I had Photoshop CS2 installed and running fine on a MacBook Pro (10.5.4, 2GB RAM), until it suddenly crashed and now will not open. Gives the error message: "Could not initialize because there's not enough memory." I have 1.5 GB of memory free, and 70 GB of disk space free. I've reinstalled, tried creating a new user to run it, but nothing is working. I've found a couple of mentions of the same problem online, but no solutions. Can anyone help me?

Hi Jen,
I don't know how MacBook works but it sounds like I just had basically the same problem which John Joslin had the correct answer. He said, "Try resetting your preferences as described in the FAQ at:
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
(A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.)"
I have windows vista ultimate so I'm not sure if this will help you but my preferences were at:
C:\Users\username\AppData\Roaming\Adobe\Photoshop\9.0\Adobe Photoshop CS2 Settings. I just renamed my pref's and photoshop opened right up.
Good Luck!

CS4 Bridge Error Message-"The operation couldnot be completed. Not Enough MEMORY ERROR MESSAGES

http://forums.adobe.com/message/3469769
I originally posted this in Photoshop but employee thought expertise was lacking in that forum and that I should move my question to this one.
Seems very few Adobe CSx users use Bridge....go figure!
Anyway getting error messages that there is not enough memory in Bridge to continue and I must restart Bridge.
Refer to the above link for original question and all pertinant computer data.
Seems this is a very prevelant problem in both the PC and MAC environment but Adobe has felt not important enough to help(see employee comment or lack thereof).
Any help would be appreciated.
I am not real "computer" saavy so please speak so("Idiots Guide To Adobe Bridge ; >) )
Dan

Apparently not. I'm still seeing it in the Photoshop Windows forum - though it's anyone's guess WHAT you'll see with this Jive Turkey forum software.
-Noel

Not enough memory error when passing an array to a chart

Hello.
I am trying to pass some data from a reading loop to a display loop using queues and charts.
In order to save on redraws I am reading the queue just once a while, flush it and pass the resulting array to the Chart. It is actually an array with clusters of three values.
Everything works fine unitl I actualy want to display the chart. I can pass the data and see it using an indicator without any problems.
When I wire the data to the chart it randomly shows : "not enough memory to complete this operation"
The fact is the array being passed to the chart is of random size.
The queue size is good for about 20 min. Labview shows an error after a few seconds. After clicking ok it prints out the results correctly and then a second or two later same error.
What am I missing here? Thanks
LV 2012 f3 I7 2.4GHz 16GB RAM
Attachments:
TestChart.vi ‏17 KB

Not sure if it helps or not but here is the error.
I put about 200 elements/s in the queue. That is why instead of reading it 200/s I just want it to read it once a while.
I am not sure what is a bigger burden:copying one 500 elements array twice a second or 200/s and 200 calls to the Queue.
The max size of the queue is not important here. I can set it to something more reasonable and will get the same error.
What will happen to my CPU usage if I put the Chart in the for loop and make 500 call to it? And then half a second later another 500 calls?
As I said at this point I do not know how much history I need or not but all I want is to be able to see a few s of it. If I loose the rest it is ok for now.
Lets says that all I care is to see it close to real time with a history of 5s. It would mean the queue buffer size of 1000.
Back to the main problem: why do I see the memory error window when I know clearly that I have plenty of memory left.
Attachments:
Error.jpg ‏18 KB

Not enough memory errors

I have a d110a printer. Setup worked fine. Downloaded the HP Iprint app to my phone. No issues. Sometimes when I'm printing a pic from the phone i'll get possible printer error, not enough memory. I'll shut the prnter off and back on it resolves the issue. Any known fixes for this?

Ok Rusty,
This are the official ADOBE spec.
Windows
Intel® Pentium® 4 or AMD Athlon® 64 processor
Microsoft® Windows Vista® with Service Pack 2 or Windows® 7 with Service Pack 1
2GB of RAM
1GB of available hard-disk space
1024x768 display
DVD-ROM drive
Internet connection required for Internet-based services*
Premiere, Photoshop etc runs fine, my friend have a similar System it runs
better, no Error
I export only one Picture in LR4 and its come Not Enough Memory.
I export in LR3.6 120 Pictures and works fine!!!!
nice day
mangray

Photoshop CS6 Not Enough Memory error

Just installed CS6 about a month ago and at different points of taxing the program and my system and on various tools or events in Photoshop, I get an error that tells me there is not enough ram to complete the task.
I've read a few other folks are having this issue - but the answer for them is usually a 32-bit/low amount of memory to begin with.
I'm using CS6 Extended 64-bit and my comp specs are:
Windows 7 Pro
16 gigs of DDR3 memory
Intel i-7 second gen chip
ATI Radeon 5500 with 2 gigs onboard memory
And all of my stuff is up to date - including PS. I've allocated 75% of the system memory to PS in the preferences.
Thoughts?

Final update as the problem seems to now be fixed.
I installed a second 1TB HDD that is completely empty and dedicated it as a scratch disk for PS. I then opened an image in PS and immediately got the error message that "could not complete command due to not enough memory (RAM)".
I restarted everything and tried to open the image again and got the same error message. So I went back to the forums and started looking. Found a post that suggested that you hold down Control-ALT-Shift while PS opens and reset all of the preferences in PS. I did and I haven't had a single issue since I did that.
I'm not sure why or how - but perhaps in the download and install of the latest version of PS things got scrambled.
Hope this discovery can help others as I did find a lot of folks complaining about the same error.

There is not enough memory error with 8gb installed

Description:
I'm getting an error when trying to copy or cut a collection of basic shapes in CS6 on Mac OS X 10.8.
It reads:
There is not enough memory to complete the operation.
To increase available memory, close other open documents or applications.
But when i check activity monitor there is plenty of memory available. I can succesfully copy a smal(ler) amount of shapes.
Steps already taken:
Tried copying after a system restart with no other programs running.
Tried adding more memory (i had 4gb originally, I just upgraded to 8gb).
I reinstalled Flash
I tried the same procedure (copying the same amount of shapes) on another machine with a similar amount of RAM and this works fine.
Is there a way you can allocate more memory to flash, or is this some setting that i'm missing?
Any help would be greatly appreciated!
P.s. I read this thread http://forums.adobe.com/message/3609214#3609214, and my problem is only different in that i don't have some huge files i'm dealing with. The .fla is only ~10mb.

Thanks for chiming in Mataxia.
One thing you can try is selecting the layers that have the shapes you want to copy. Then right click and choose copy layers. In my case this works even though selecting just the shapes (instead of the layers) will cause the memory error.
I'm using this as a workaround, but i can imagine that this isn't of any help in all cases.
This confirms my suspicions that this is a bug in flash. Would be great if someone from Adobe were reading this...

Not enough memory error in Hyper-V

Similar Messages

Maybe you are looking for