Not Enough Memory Error - Please Help!!!

I can not get iTunes to start, I keep getting a "The iTunes application could not be opened. There is not enough memory available." It worked fine yesterday, and I've made no changes at all.
PowerMac G5 1.8 Dual with 4 gigs ram and 2 160 gig drive, not even close to being maxed.

That's what it sounds like. Not enough hard drive space...

Similar Messages

  • A FIX for error message: When I try to open Snood (it's a game) I get this message.  Not enough memory {Error # :: 0, in sound.cp@line 101  Can you help?

    After years of playing Snood, w/o problems, I started getting this error message, on my iMac, OS 10.5.8,
    with 4 GB of memory when opening Snood:  Not enough memory {Error # :: 0, in sound.cp@line 101
    My MacBook Pro w. Mac OS 10.6.8 did not have this problem.
    Initially I thought that Snood raised its minimum requirement to Mac OS 10.6.
    I had several correspondences with Snood. Their tech support is great. Quick and thorough responses.
    They thought the issue was in Mac's system preferences/ Sound. It was.
    I didn't realize that my sound input and output devices were gone.
    The fix was resetting the PRAM. I found this advice on MacFixIt.com.
    MacFixIt help with volume:   http://reviews.cnet.com/8301-13727_7-10415659-263.html
    Resetting the PRAM is on Apple support:   http://support.apple.com/kb/HT1379
    My sound (music!) is back, along with Snood. So glad I reset the PRAM before reinstalling the OS software!
    Thank you to Snood, MacFixIt and Apple.
    Happy new year all!

    Good work, nice post/tip, thanks!

  • TS3682 i plug in my iphone 4 and i loss all contact... i try to backup restore but its error say not enough space.  please help me. i want only my contact backup restore not everything. so i dont know how can i do ?

    i plug in my iphone 4 and i loss all contact... i try to backup restore but its error say not enough space.  please help me. i want only my contact backup restore not everything. so i dont know how can i do ?

    Try to connect in recovery mode to restore, without using the latest backup, explained here:
    iOS: Unable to update or restore

  • Export several Fuji X-Trans Files got "Not Enough Memory" Error

    When I tried to export several (say 15) Fuji X-Trans files at the same time, I got a "Not Enough Memory" Error. This problem only occurred after after upgrading to Lightroom 4.4. I can now only export a few (3-5) X-Trans files at the same time. Does anyone encounter this problem and know how to fix it?
    I am using Windows 7 32-bit with 4GB memory, SSD System drive, and Radeon 7700 Graphics card. For Virtual memory, I set "no paging file" on C drive and "system managed size" on another SSD drive.
    Thanks in advance.
    Wilson

    One might expect an Export function is single-threaded so the number of files exported wouldn’t matter, but perhaps if you are very close to the limit, memory fragmentation comes into play, where LR is requiring contiguous blocks and there aren’t any big enough.  It’s probably time to upgrade to a 64-bit Windows system and start getting used to the Metro interface which isn’t bad as long as your frequently-used programs have tiles on the first screen.
    Go to Help / System Info… and see how much memory LR has available.  On my 32-bit system with 4GB of RAM installed LR only has 716.8MB available which is typical for 32-bit Windows applications:
    Built-in memory: 3327.0 MB
    Real memory available to Lightroom: 716.8 MB
    Real memory used by Lightroom: 160.5 MB (22.3%)
    Virtual memory used by Lightroom: 160.8 MB
    Memory cache size: 33.2 MB
    You could change your VM settings to allocate a multi-gigabyte minimum pagefile size to see if it makes any difference, in case LR is waiting on the VMM to allocate more and then gives up, but I’d expect LR is requiring actual RAM for processing images, not VM which is much , much slower.

  • Troubleshoot not enough memory error

    I am getting a not enough memory error, and while there are tons of posts about this on the forums, I had some additional questions. First, I have two cRIOs, and think the error may have been thrown by one of them. Is this even possible though? I'm trying to narrow down which exe the error may be in. Second, does anyone have an order of steps they take when they get these errors in order to troubleshoot them?
    CLA, LabVIEW Versions 2010-2013
    Solved!
    Go to Solution.

    Found the REAL problem! I was not reading my header correctly, this resulted in type casting the wrong bytes of data. Every now and then I would be type casting bytes of data that when type casted from a string to a I32 resulted in a number around 17 million. I am assuming the TCP read tries to malloc this memory (or new if its c++ ) and was unable to do so. That's why I got the not enough memory error. When I started reading my TCP bytes correctly, the error went away.
    CLA, LabVIEW Versions 2010-2013

  • INTERNAL ERROR & NOT ENOUGH MEMORY error

    Somehow 4 gig of memory is not enough!!
    I am on Win Vista ultimate. intel Core 2 Duo 2.66 4 BG of
    Ram.
    And I'm working on a local hard drive with fat all else
    running
    I constantly get "Internal Error occurred...could not complete
    request"
    particularly alarming if that request was to save!!!!. I have
    been using the 'fireworks autobackup" air app...save me heaps of
    time...But its taking longer and longer to save the file as I work
    on it.
    If i save every 10 minutes !!!! its taking 1:20 to save..this
    is 12% of my time...FW STILL sucks memory somehow..
    any one with solution to this!!!???
    Ive also had the "not enough memory" error a few times..In
    which every thing done on the file is lost since last it was
    opened...whether I saved it a million times or not. I've started
    making copy backups and restarting FW every few hours to purge the
    memory..but this sucks. This memory leak seemed to be mostly gone
    in CS3 according to others so assumed CS4 had it sorted

    One of our users is running across a similar issue using the
    pen tool. A file that's 3000x2000 having sections cut out using the
    pen tool will spike FW up to 2gig of used ram. Eventually the
    Internal Error messages will start but, you can still trace your
    path. The issue is it pops up every time you click a new point. The
    only current work around I have for the user is to shrink the file
    or decrease the dpi. Has anyone else run across this?
    Specs
    XP SP3
    Core2 3.0ghz
    4 gig ram.

  • P800 "Not Enough Memory" error when trying to use Contacts

    Now even after I reset my P800 from iSync I get this 'Not enough memory' error when I try to use my contact list.
    This is getting really frustrating! I want to downgrade...

    I suspect it's the feed as I've just tried it and the latest episode fails. Try contacting the Podcast's producer/publisher to let them know, since they may not. From your linked page, click on their name and follow that to their website, where you should find contact details.
    By the way, even if the problem is with iTunes, it's still down to the producer/publisher to rectify it, which is why I suggest you contact them
    Phil

  • Not Enough Memory Error During Update

    There is a new update for Ovi Maps 3.04 today. I tried to install it using the Software Update app and kept getting a not enough memory error. I even tried closing all programs, deleted a few apps I no longer use and restared my phone. Still I get the error.
    Any suggestions?
    <\
    \>tuntman

    Have a read of this thread as i suffered the same problem:
    /t5/Maps-Navigation-and-GPS/E52-error-when-installing-ovimaps/m-p/751192#M27026

  • Not enough memory error when attempting export

    Whenever I try exporting an 111Mb freehand file to a
    pdf/gif/jpg/bmp/png I get a not enough memory error unless I set
    the image quality to be very low. I am using Freehand MX 11.0.2 for
    Windows. Does anyone know if there is asetting somewhere to prevent
    this from happening?

    > Whenever I try exporting an 111Mb freehand file to a
    pdf/gif/jpg/bmp/png I get
    > a not enough memory error unless I set the image quality
    to be very low. I am
    > using Freehand MX 11.0.2 for Windows. Does anyone know
    if there is asetting
    > somewhere to prevent this from happening?
    Export and Import filters in FreeHand are not very good and
    exporting large document as bitmap just can't be done. If you use
    raster effects with high resolution export fails sooner or later or
    at least takes even days.
    To create a bitmap image I usually make pdf with Acrobat (the
    only reliable way) and open it in Photoshop where you can define
    dimensions, color space, etc. Photoshop opens some FreeHand created
    eps and ai files too. Also Acrobat can export bitmap files.
    Jukka

  • Need Help with "Not Enough Memory Error" when running executable (is my VI reworkable?)

    When I started making this VI, I had no clue about proper VI flow, sub-VI usuage, and much more I'm sure.
    The VI is a program that outputs a 0-5V digiatl signal to a relay board (to actuate an air cylinder) and monitors 4 input voltages (lets say from a pressure transducer) . The program would then shut down the corresponding output channel if a pressure threshold is not met.
    Surprissingly for my first LV program, The VI functions "fine" (the quotes are because I know my programming flow is a mess and probably not efficient) unitl I reach a given cycle count or time elasped, at which time my VI blows up and I receive an error for "not enough memory to complete operatoin".
    I am wondering if there is a simple DAQmx (or something else) command misplaced or missing that would solve this issue. When I started making this VI I had a poor top down design layout, or lack of one. I would like to believe I have learned a lot from making this program with no LV training and if I were to do it again I would utilize state machines and sub VI's more. However, with time not on my side and LV not a priority in my job I would like to know if this VI is reworkable..?
    I should also mention that this program is being run as an executable on a laptop without the full LV development software. I dont know if the executable creation process could have left to this problem either...
    Attached is LV version 10 and 11
    Thanks for the help
    Attachments:
    LCT_DAQmx v11.0.vi ‏173 KB
    LCT_DAQmx.vi ‏135 KB

    There are some things you can probabaly do fairly easily.  Four of the inner while loops appear to be very similar.  You could probably make a subVI from one of them and reuse the code.  Some of the shift registers are initialized and some are not.  I suspect that this is an error, although I did not look closely enough to determine which way is intended.  Read up on reentrancy.  You may need that for the subVI.
    The outer loop, if it is needed at all should be stopped by a front panel boolean, not by the Abort button.  Someone on the Forums has suggested that using the Abort button to stop a VI is like using a tree to stop a car - it works but may have undesirable consequences!
    Re-initializing the DAQ tasks and clearing them on each iteration is not very effficient, is slow, and may lead to problems.
    The inner inner while loops (inside On Cycle and Off Cycle) are very similar, differing mostly in the data written. Perhaps you only need Idle and Run (with Data as a parameter).  The inner inner loops might be combined with the outer loops with some change in the way the timing is handled.
    You Dequeue in two places in each loop.  There is no data dependency bewteen the two Dequeue functions, meaning that you cannot be sure which will execute first.  Also, none of the Dequeues has a timeout set. They will wait forever if no data is available.  Queues should not usually be read in more than one location to avoid loss of data or confusion about which data came first.
    Lynn

  • CS4 Bridge Error Message-"The operation couldnot be completed. Not Enough MEMORY ERROR MESSAGES

    http://forums.adobe.com/message/3469769
    I originally posted this in Photoshop but employee thought expertise was lacking in that forum and that I should move my question to this one.
    Seems very few Adobe CSx users use Bridge....go figure!
    Anyway getting error messages that there is not enough memory in Bridge to continue and I must restart Bridge.
    Refer to the above link for original question and all pertinant computer data.
    Seems this is a very prevelant problem in both the PC and MAC environment but Adobe has felt not important enough to help(see employee comment or lack thereof).
    Any help would be appreciated.
    I am not real "computer" saavy so please speak so("Idiots Guide To Adobe Bridge ; >) )
    Dan

    Apparently not.  I'm still seeing it in the Photoshop Windows forum - though it's anyone's guess WHAT you'll see with this Jive Turkey forum software.
    -Noel

  • "Itunes library cannot be saved, there is not enough memory" Error Message

    Every time when I leave my mac to play songs on iTunes in shuffle mode or when I select a few songs (such as by the same singer), this error message ("Itunes library cannot be saved, there is not enough memory") would appear after a while, and my iTunes would then crash by itself and an option to 'Reopen' or to 'Report the problem to Apple' box would pop up.
    However, this just does not make any sense to me. My mac is a Macbook Pro 2011, 13" with i5 sandybridge processor, 4G RAM, how could it ran out of virtual memory when I am only playing SEVEN songs by the same singer?
    Does anyone know how to fix this problem? Or should I send this computer back to Apple and ask them to check it?
    Thank you!

    I'm getting the same message -- "The iTunes Library file cannot be saved. There is not enough memory available." It just started popping up every time I do anything on iTunes, but I haven't updated the program recently (iTunes 10.4.1.10, for the record), and have been using it on this computer (Win7) for over a year.
    I checked the archived responses to this problem, and just about all of them are about its other cause ("You do not have enough privileges for this operation"), and the others are about incompatabilities with early Windows 7 (and are several years old), so I don't imagine they're completely relevant.
    Please, does anyone know anything to help?

  • Cannot initialize Photoshop CS2 "not enough memory" error

    I had Photoshop CS2 installed and running fine on a MacBook Pro (10.5.4, 2GB RAM), until it suddenly crashed and now will not open. Gives the error message: "Could not initialize because there's not enough memory." I have 1.5 GB of memory free, and 70 GB of disk space free. I've reinstalled, tried creating a new user to run it, but nothing is working. I've found a couple of mentions of the same problem online, but no solutions. Can anyone help me?

    Hi Jen,
    I don't know how MacBook works but it sounds like I just had basically the same problem which John Joslin had the correct answer.  He said, "Try resetting your preferences as described in the FAQ at:
    http://forums.adobe.com/thread/375776?tstart=0
    You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
    This resets all settings in Photoshop to factory defaults.
    (A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.)"
    I have windows vista ultimate so I'm not sure if this will help you but my preferences were at:
    C:\Users\username\AppData\Roaming\Adobe\Photoshop\9.0\Adobe Photoshop CS2 Settings. I just renamed my pref's and photoshop opened right up.
    Good Luck!

  • Not enough memory error when passing an array to a chart

    Hello.
    I am trying to pass some data from a reading loop to a display loop using queues and charts.
    In order to save on redraws I am reading the queue just once a while, flush it and pass the resulting array to the Chart. It is actually an array with clusters of three values.
    Everything works fine unitl I actualy want to display the chart. I can pass the data and see it using an indicator without any problems.
    When I wire the data to the chart it randomly shows : "not enough memory to complete this operation"
    The fact is the array being passed to the chart is of random size.
    The queue size is good for about 20 min. Labview shows an error after a few seconds. After clicking ok it prints out the results correctly and then a second or two later same error.
    What am I missing here? Thanks
    LV 2012 f3 I7 2.4GHz 16GB RAM
    Attachments:
    TestChart.vi ‏17 KB

    Not sure if it helps or not but here is the error.
    I put about 200 elements/s in the queue. That is why instead of reading it 200/s I just want it to read it once a while.
    I am not sure what is a bigger burden:copying one 500 elements array twice a second or 200/s and 200 calls to the Queue.
    The max size of the queue is not important here. I can set it to something more reasonable and will get the same error.
    What will happen to my CPU usage if I put the Chart in the for loop and make 500 call to it? And then half a second later another 500 calls?
    As I said at this point I do not know how much history I need or not but all I want is to be able to see a few s of it. If I loose the rest it is ok for now. 
    Lets says that all I care is to see it close to real time with a history of 5s. It would mean the queue buffer size of  1000.
    Back to the main problem: why do I see the memory error  window when I know clearly that I have plenty of memory left.
    Attachments:
    Error.jpg ‏18 KB

  • Photoshop CS6 Not Enough Memory error

    Just installed CS6 about a month ago and at different points of taxing the program and my system and on various tools or events in Photoshop, I get an error that tells me there is not enough ram to complete the task.
    I've read a few other folks are having this issue - but the answer for them is usually a 32-bit/low amount of memory to begin with. 
    I'm using CS6 Extended 64-bit and my comp specs are:
    Windows 7 Pro
    16 gigs of DDR3 memory
    Intel i-7 second gen chip
    ATI Radeon 5500 with 2 gigs onboard memory
    And all of my stuff is up to date - including PS.  I've allocated 75% of the system memory to PS in the preferences. 
    Thoughts?

    Final update as the problem seems to now be fixed.
    I installed a second 1TB HDD that is completely empty and dedicated it as a scratch disk for PS.  I then opened an image in PS and immediately got the error message that "could not complete command due to not enough memory (RAM)".
    I restarted everything and tried to open the image again and got the same error message.  So I went back to the forums and started looking.  Found a post that suggested that you hold down Control-ALT-Shift while PS opens and reset all of the preferences in PS.  I did and I haven't had a single issue since I did that.
    I'm not sure why or how - but perhaps in the download and install of the latest version of PS things got scrambled.
    Hope this discovery can help others as I did find a lot of folks complaining about the same error.

Maybe you are looking for