'Not enough memory' error using Music Manager with...
When I connect my brand new 6300 to my PC, and try to copy an mp3 onto the phone (either C: phone or E: memory card (128Mb)) the software says 'There is not enough memory in the phone.' This is a lie as the phone is brand new and I have put nothing on it!
I have tried reformatting the 128Mb SD card that came with the phone but to no avail.
The only way I can get music onto the phone is in Data transfer mode, upon which the music files seem to work fine - hence not a problem with the memory card.
Any suggestions?
Nokia PC Suite 6.83.14.1
Windows XP with Service Pack 2
Nokia 6300 Phone
microSD card 128Mb
In Music Manager go to the menu -> Options -> Settings
and at the last tab "Nokia 6300" (This tab will appear only if you connect your nokia 6300 with the PC)
Set the path to the music file which is pointed to your memory card. Ex. "E:\Musics"
BTW "C:\..." Means the phone memory itself.Message Edited by meji1000 on 19-Jul-200710:18 AM
Similar Messages
-
P800 "Not Enough Memory" error when trying to use Contacts
Now even after I reset my P800 from iSync I get this 'Not enough memory' error when I try to use my contact list.
This is getting really frustrating! I want to downgrade...I suspect it's the feed as I've just tried it and the latest episode fails. Try contacting the Podcast's producer/publisher to let them know, since they may not. From your linked page, click on their name and follow that to their website, where you should find contact details.
By the way, even if the problem is with iTunes, it's still down to the producer/publisher to rectify it, which is why I suggest you contact them
Phil -
Export several Fuji X-Trans Files got "Not Enough Memory" Error
When I tried to export several (say 15) Fuji X-Trans files at the same time, I got a "Not Enough Memory" Error. This problem only occurred after after upgrading to Lightroom 4.4. I can now only export a few (3-5) X-Trans files at the same time. Does anyone encounter this problem and know how to fix it?
I am using Windows 7 32-bit with 4GB memory, SSD System drive, and Radeon 7700 Graphics card. For Virtual memory, I set "no paging file" on C drive and "system managed size" on another SSD drive.
Thanks in advance.
WilsonOne might expect an Export function is single-threaded so the number of files exported wouldn’t matter, but perhaps if you are very close to the limit, memory fragmentation comes into play, where LR is requiring contiguous blocks and there aren’t any big enough. It’s probably time to upgrade to a 64-bit Windows system and start getting used to the Metro interface which isn’t bad as long as your frequently-used programs have tiles on the first screen.
Go to Help / System Info… and see how much memory LR has available. On my 32-bit system with 4GB of RAM installed LR only has 716.8MB available which is typical for 32-bit Windows applications:
Built-in memory: 3327.0 MB
Real memory available to Lightroom: 716.8 MB
Real memory used by Lightroom: 160.5 MB (22.3%)
Virtual memory used by Lightroom: 160.8 MB
Memory cache size: 33.2 MB
You could change your VM settings to allocate a multi-gigabyte minimum pagefile size to see if it makes any difference, in case LR is waiting on the VMM to allocate more and then gives up, but I’d expect LR is requiring actual RAM for processing images, not VM which is much , much slower. -
After years of playing Snood, w/o problems, I started getting this error message, on my iMac, OS 10.5.8,
with 4 GB of memory when opening Snood: Not enough memory {Error # :: 0, in sound.cp@line 101
My MacBook Pro w. Mac OS 10.6.8 did not have this problem.
Initially I thought that Snood raised its minimum requirement to Mac OS 10.6.
I had several correspondences with Snood. Their tech support is great. Quick and thorough responses.
They thought the issue was in Mac's system preferences/ Sound. It was.
I didn't realize that my sound input and output devices were gone.
The fix was resetting the PRAM. I found this advice on MacFixIt.com.
MacFixIt help with volume: http://reviews.cnet.com/8301-13727_7-10415659-263.html
Resetting the PRAM is on Apple support: http://support.apple.com/kb/HT1379
My sound (music!) is back, along with Snood. So glad I reset the PRAM before reinstalling the OS software!
Thank you to Snood, MacFixIt and Apple.
Happy new year all!Good work, nice post/tip, thanks!
-
INTERNAL ERROR & NOT ENOUGH MEMORY error
Somehow 4 gig of memory is not enough!!
I am on Win Vista ultimate. intel Core 2 Duo 2.66 4 BG of
Ram.
And I'm working on a local hard drive with fat all else
running
I constantly get "Internal Error occurred...could not complete
request"
particularly alarming if that request was to save!!!!. I have
been using the 'fireworks autobackup" air app...save me heaps of
time...But its taking longer and longer to save the file as I work
on it.
If i save every 10 minutes !!!! its taking 1:20 to save..this
is 12% of my time...FW STILL sucks memory somehow..
any one with solution to this!!!???
Ive also had the "not enough memory" error a few times..In
which every thing done on the file is lost since last it was
opened...whether I saved it a million times or not. I've started
making copy backups and restarting FW every few hours to purge the
memory..but this sucks. This memory leak seemed to be mostly gone
in CS3 according to others so assumed CS4 had it sortedOne of our users is running across a similar issue using the
pen tool. A file that's 3000x2000 having sections cut out using the
pen tool will spike FW up to 2gig of used ram. Eventually the
Internal Error messages will start but, you can still trace your
path. The issue is it pops up every time you click a new point. The
only current work around I have for the user is to shrink the file
or decrease the dpi. Has anyone else run across this?
Specs
XP SP3
Core2 3.0ghz
4 gig ram. -
Not enough memory error when attempting export
Whenever I try exporting an 111Mb freehand file to a
pdf/gif/jpg/bmp/png I get a not enough memory error unless I set
the image quality to be very low. I am using Freehand MX 11.0.2 for
Windows. Does anyone know if there is asetting somewhere to prevent
this from happening?> Whenever I try exporting an 111Mb freehand file to a
pdf/gif/jpg/bmp/png I get
> a not enough memory error unless I set the image quality
to be very low. I am
> using Freehand MX 11.0.2 for Windows. Does anyone know
if there is asetting
> somewhere to prevent this from happening?
Export and Import filters in FreeHand are not very good and
exporting large document as bitmap just can't be done. If you use
raster effects with high resolution export fails sooner or later or
at least takes even days.
To create a bitmap image I usually make pdf with Acrobat (the
only reliable way) and open it in Photoshop where you can define
dimensions, color space, etc. Photoshop opens some FreeHand created
eps and ai files too. Also Acrobat can export bitmap files.
Jukka -
Not Enough Memory Error During Update
There is a new update for Ovi Maps 3.04 today. I tried to install it using the Software Update app and kept getting a not enough memory error. I even tried closing all programs, deleted a few apps I no longer use and restared my phone. Still I get the error.
Any suggestions?
<\
\>tuntmanHave a read of this thread as i suffered the same problem:
/t5/Maps-Navigation-and-GPS/E52-error-when-installing-ovimaps/m-p/751192#M27026 -
Troubleshoot not enough memory error
I am getting a not enough memory error, and while there are tons of posts about this on the forums, I had some additional questions. First, I have two cRIOs, and think the error may have been thrown by one of them. Is this even possible though? I'm trying to narrow down which exe the error may be in. Second, does anyone have an order of steps they take when they get these errors in order to troubleshoot them?
CLA, LabVIEW Versions 2010-2013
Solved!
Go to Solution.Found the REAL problem! I was not reading my header correctly, this resulted in type casting the wrong bytes of data. Every now and then I would be type casting bytes of data that when type casted from a string to a I32 resulted in a number around 17 million. I am assuming the TCP read tries to malloc this memory (or new if its c++ ) and was unable to do so. That's why I got the not enough memory error. When I started reading my TCP bytes correctly, the error went away.
CLA, LabVIEW Versions 2010-2013 -
There is not enough memory error with 8gb installed
Description:
I'm getting an error when trying to copy or cut a collection of basic shapes in CS6 on Mac OS X 10.8.
It reads:
There is not enough memory to complete the operation.
To increase available memory, close other open documents or applications.
But when i check activity monitor there is plenty of memory available. I can succesfully copy a smal(ler) amount of shapes.
Steps already taken:
Tried copying after a system restart with no other programs running.
Tried adding more memory (i had 4gb originally, I just upgraded to 8gb).
I reinstalled Flash
I tried the same procedure (copying the same amount of shapes) on another machine with a similar amount of RAM and this works fine.
Is there a way you can allocate more memory to flash, or is this some setting that i'm missing?
Any help would be greatly appreciated!
P.s. I read this thread http://forums.adobe.com/message/3609214#3609214, and my problem is only different in that i don't have some huge files i'm dealing with. The .fla is only ~10mb.Thanks for chiming in Mataxia.
One thing you can try is selecting the layers that have the shapes you want to copy. Then right click and choose copy layers. In my case this works even though selecting just the shapes (instead of the layers) will cause the memory error.
I'm using this as a workaround, but i can imagine that this isn't of any help in all cases.
This confirms my suspicions that this is a bug in flash. Would be great if someone from Adobe were reading this... -
Need Help with "Not Enough Memory Error" when running executable (is my VI reworkable?)
When I started making this VI, I had no clue about proper VI flow, sub-VI usuage, and much more I'm sure.
The VI is a program that outputs a 0-5V digiatl signal to a relay board (to actuate an air cylinder) and monitors 4 input voltages (lets say from a pressure transducer) . The program would then shut down the corresponding output channel if a pressure threshold is not met.
Surprissingly for my first LV program, The VI functions "fine" (the quotes are because I know my programming flow is a mess and probably not efficient) unitl I reach a given cycle count or time elasped, at which time my VI blows up and I receive an error for "not enough memory to complete operatoin".
I am wondering if there is a simple DAQmx (or something else) command misplaced or missing that would solve this issue. When I started making this VI I had a poor top down design layout, or lack of one. I would like to believe I have learned a lot from making this program with no LV training and if I were to do it again I would utilize state machines and sub VI's more. However, with time not on my side and LV not a priority in my job I would like to know if this VI is reworkable..?
I should also mention that this program is being run as an executable on a laptop without the full LV development software. I dont know if the executable creation process could have left to this problem either...
Attached is LV version 10 and 11
Thanks for the help
Attachments:
LCT_DAQmx v11.0.vi 173 KB
LCT_DAQmx.vi 135 KBThere are some things you can probabaly do fairly easily. Four of the inner while loops appear to be very similar. You could probably make a subVI from one of them and reuse the code. Some of the shift registers are initialized and some are not. I suspect that this is an error, although I did not look closely enough to determine which way is intended. Read up on reentrancy. You may need that for the subVI.
The outer loop, if it is needed at all should be stopped by a front panel boolean, not by the Abort button. Someone on the Forums has suggested that using the Abort button to stop a VI is like using a tree to stop a car - it works but may have undesirable consequences!
Re-initializing the DAQ tasks and clearing them on each iteration is not very effficient, is slow, and may lead to problems.
The inner inner while loops (inside On Cycle and Off Cycle) are very similar, differing mostly in the data written. Perhaps you only need Idle and Run (with Data as a parameter). The inner inner loops might be combined with the outer loops with some change in the way the timing is handled.
You Dequeue in two places in each loop. There is no data dependency bewteen the two Dequeue functions, meaning that you cannot be sure which will execute first. Also, none of the Dequeues has a timeout set. They will wait forever if no data is available. Queues should not usually be read in more than one location to avoid loss of data or confusion about which data came first.
Lynn -
"Not Enough Memory" Error when programming Keithley 2400 using LabView 6i
I'm trying to use LabView 6i drivers to control a keithley 2400 via GPIB interface. Most of the drivers work fine but the high level operations such as a the sweep functions or even functions that perform a single measurement gives a "Not enough memory" driver error. What doesn't have enough memory? A single measurement can't overload the PC's or Keithley's memory buffer so why am I getting the error?
Thanks for any help you can offer...
EvanEvan,
That's not a LabVIEW, GPIB, or NI-VISA error code - that error is generated by the instrument driver. I went ahead and downloaded this driver from keithley.com to take a look at this Perform DC VI.vi function's source. But unfortunately, the heart of the Perform DC VI function is a "Call Library Node" call to a keithley DLL, so that is a black box. Also, no c-source included that I could find, so I could not look at that either. And since I don't have a Keithley 2400 to play with, that brings me to the end of the rope on my system.
A couple of more things you could try, however, since you actually have the instrument.
(1) Definately build a simple VI to eliminate other aspects of your program. In this case, the most simple
VI would be an Init, Perform DC VI.vi, and then a close. Make sure this simple program reproduces the error. If it doesn't, then the problem is likely introduced in your code, not the driver.
(2) If #1 reproduces the problem, then check that you have all the driver pre-requisites correct (ie, that NI-VISA is installed, that the GPIB board is working properly, etc).
(3) If #1 and #2 do not result in any discoveries, then you will have to enter the black box of that DLL. Primary method to do that, to be honest, is to contact Keithley and ask for help, since they developed the driver. Second method is to use our NI-SPY utility, which can capture all calls to VISA drivers, (since this is a VXIpnp driver, it should be fundamentally using VISA within the DLL). Within NI-SPY, you will be able to see the individual function calls, and which ones are returning errors. That may help point in the right direction.
Regards,
Greg Caesar
National Instruments
Applications Engineer -
Getting error, "Could not fill because there is not enough memory (RAM)" , using elemrnts 10 photo
I am getting an error: Could not fill because there is not enough memory (RAM). I am using photomerge in elements 10, and this error happens at the end of photomerging photos. System requirements are 1 GB of RAM (2 GB for HD video functions). My system has 4 GB memory (3.74 GB usable), which should be enough. How large a system do I need to not get this error? Any other help would be appreciated.
Have you tried completing the pano without selecting edge fill. Then crop the result or use the clone stamp to fill the blanks.
-
ITunes 6.02 problem ("not enough memory error")
I attempted to update iTunes to the newest version yesterday, and for the most part everything went as planned. The application updated, everything seemed to be working afterwards.
The next time I went to open iTunes I get an error of "The iTunes application could not be opened. There is not enough memory available." Seems odd to me, but I quit out of everything and try again, still no iTunes. I can still open Photoshop, Flash, Logic Pro and other more memory intensive apps, but iTunes will not open.
Computer setup:
Dual 1.4Ghz G4 w/ 1GB RAM
Things I've tried so far:
Restarted computer
Repaired permissions
Reinstalled iTunes
Deleted iTunes prefs that I could find
Ran around screaming
So if anyone has any other ideas as to what to do, let me know. Is there a way to get a hold of an old version of iTunes? Any help would be appreciated.
Thanks,
Dave
PowerMac G4 Dual 1.42 Ghz/1GB RAM Mac OS X (10.3.9)As long as I don't wear you out with this Unix command-line stuff, let's plug away at cracking this nut.
I'd be interested in seeing the 'top' headers immediately after a reboot. Check that nothing much is running in the dock. Then try iTunes right then. I know you've said you've done this, I have to ask anyway, sort of like Apple causes you to do stuff in their sequence when you call them.
I've never heard of 'SupportedApps.txt' find it and tell me what's in it. Does it mention iTunes? If you can't find it via Finder or Spotlight,
Type: find -x / -type f -name SupportedApps.txt -ls
That will search the entire boot drive for it.
361 Mb (+ 12 Mb should be plenty of memory to run iTunes.
Okay, did you add any codecs to your system recently?
Like me, I see you've installed DivX and Flip4Mac.
According to the trace, the last two files iTunes opened before it exited were both /Library/Preferences/.GlobalPreferences.plist
That seems a little odd to open and read in its contents twice in a row. Anyway that file seemed to indicate another codec called Soundflower?
com.apple.audio.CoreAudio.DeviceSettings.Soundflower_AudioEngine
That's one to dup and delete and retry iTunes.
As is the above GlobalPreferences file.
In fact, you might look at this list and try and figure which other ones to try getting out of the way. I say to dup and delete the original, as opposed to simply renaming the original, because those darn Mac aliases can locate a file even if you've renamed it, unlike Unix symlinks.
Every time you retry iTunes, recheck the most recently modified files in /var/log.
Note that all of the files listed below might not exist, they were attempts to open the named files.
This is the list of all plists iTunes opened:
# grep plist Trace-iTunes.txt | sed -n '/NAMI/{ s/^[^"][^"]*"//; s/"//; p; }'|sort -u
/.vol/234881026/2473/com.apple.iTunes.secure.plist
/Applications/iTunes.app/Contents/Info-macos.plist
/Applications/iTunes.app/Contents/Info.plist
/Library/Audio/Plug-Ins/HAL/Digidesign CoreAudio.plugin/Contents/Info-macos.plist
/Library/Audio/Plug-Ins/HAL/Digidesign CoreAudio.plugin/Contents/Info.plist
/Library/Audio/Plug-Ins/HAL/JackRouter.plugin/Contents/Info-macos.plist
/Library/Audio/Plug-Ins/HAL/JackRouter.plugin/Contents/Info.plist
/Library/Audio/Plug-Ins/HAL/iSightAudio.plugin/Contents/Info-macos.plist
/Library/Audio/Plug-Ins/HAL/iSightAudio.plugin/Contents/Info.plist
/Library/CFMSupport/StuffItEngineShell.cfm/Contents/Info-macos.plist
/Library/CFMSupport/StuffItEngineShell.cfm/Contents/Info.plist
/Library/Frameworks/DigiMachOServices.framework/Resources/Info.plist
/Library/Frameworks/DigidesignFWDriver.framework/Resources/Info.plist
/Library/Frameworks/DigidesignUSBDriver.framework/Resources/Info.plist
/Library/Managed Preferences/davidhunt/com.apple.Classic.plist
/Library/Managed Preferences/davidhunt/com.apple.applicationaccess.plist
/Library/Preferences/.GlobalPreferences.plist
/Library/Preferences/Network/.GlobalPreferences.plist
/Library/Preferences/Network/com.apple.HIToolbox.plist
/Library/Preferences/Network/com.apple.help.plist
/Library/Preferences/Network/com.apple.iTunes.plist
/Library/Preferences/Network/com.apple.speech.synthesis.general.prefs.plist
/Library/Preferences/com.apple.HIToolbox.plist
/Library/Preferences/com.apple.help.plist
/Library/Preferences/com.apple.iTunes.plist
/Library/Preferences/com.apple.security-common.plist
/Library/Preferences/com.apple.speech.synthesis.general.prefs.plist
/Library/QuickTime/DivX 5.component/Contents/Info-macos.plist
/Library/QuickTime/DivX 5.component/Contents/Info.plist
/Library/QuickTime/Flip4Mac WMV Import.component/Contents/Info-macos.plist
/Library/QuickTime/Flip4Mac WMV Import.component/Contents/Info.plist
/Library/QuickTime/TSCC.component/Contents/Info-macos.plist
/Library/QuickTime/TSCC.component/Contents/Info.plist
/System/Library/Components/IOQTComponents.component/Contents/Info-macos.plist
/System/Library/Components/IOQTComponents.component/Contents/Info.plist
/System/Library/Components/VCH263Codec.component/Resources/Info.plist
/System/Library/CoreServices/SystemVersion.plist
/System/Library/Extensions/Apple02Audio.kext/Contents/Info-macos.plist
/System/Library/Extensions/Apple02Audio.kext/Contents/Info.plist
/System/Library/Extensions/IOAudioFamily.kext/Contents/PlugIns/AOAHALPlugin.bund le/Contents/Info-macos.plist
/System/Library/Extensions/IOAudioFamily.kext/Contents/PlugIns/AOAHALPlugin.bund le/Contents/Info.plist
/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/H IServices.framework/Resources/Info.plist
/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/Q D.framework/Resources/Info.plist
/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fram ework/Resources/Info.plist
/System/Library/Frameworks/CoreServices.framework/Resources/Info-macos.plist
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCo re.framework/Resources/Info.plist
/System/Library/Frameworks/QuickTime.framework/Resources/Info.plist
/System/Library/LocalePlugins/ThaiTextBreak.localePlugin/Contents/Info-macos.pli st
/System/Library/LocalePlugins/ThaiTextBreak.localePlugin/Contents/Info.plist
/System/Library/QuickTime/ApplePixletVideo.component/Contents/Info-macos.plist
/System/Library/QuickTime/ApplePixletVideo.component/Contents/Info.plist
/System/Library/QuickTime/QuickTimeComponents.component/Contents/Info-macos.plis t
/System/Library/QuickTime/QuickTimeComponents.component/Contents/Info.plist
/System/Library/QuickTime/QuickTimeFirewireDV.component/Contents/Info-macos.plis t
/System/Library/QuickTime/QuickTimeFirewireDV.component/Contents/Info.plist
/System/Library/QuickTime/QuickTimeH264.component/Contents/Info-macos.plist
/System/Library/QuickTime/QuickTimeH264.component/Contents/Info.plist
/Users/davidhunt/Library/Preferences/.GlobalPreferences.plist
/Users/davidhunt/Library/Preferences/ByHost/.GlobalPreferences.000a959af38a.plis t
/Users/davidhunt/Library/Preferences/ByHost/com.apple.Classic.000a959af38a.plist
/Users/davidhunt/Library/Preferences/ByHost/com.apple.HIToolbox.000a959af38a.pli st
/Users/davidhunt/Library/Preferences/ByHost/com.apple.help.000a959af38a.plist
/Users/davidhunt/Library/Preferences/ByHost/com.apple.iTunes.000a959af38a.plist
/Users/davidhunt/Library/Preferences/ByHost/com.apple.speech.synthesis.general.p refs.000a959af38a.plist
/Users/davidhunt/Library/Preferences/com.apple.Classic.plist
/Users/davidhunt/Library/Preferences/com.apple.HIToolbox.plist
/Users/davidhunt/Library/Preferences/com.apple.help.plist
/Users/davidhunt/Library/Preferences/com.apple.iTunes.plist
/Users/davidhunt/Library/Preferences/com.apple.security.plist
/Users/davidhunt/Library/Preferences/com.apple.speech.synthesis.general.prefs.pl ist
It's sorted alphabetically, and uniquely (no dups).
I don't know if they are higher priorty to test zapping, but these are the ones from the above list with 'iTunes':
/.vol/234881026/2473/com.apple.iTunes.secure.plist
/Applications/iTunes.app/Contents/Info-macos.plist
/Applications/iTunes.app/Contents/Info.plist
/Library/Preferences/Network/com.apple.iTunes.plist
/Library/Preferences/com.apple.iTunes.plist
/Users/davidhunt/Library/Preferences/ByHost/com.apple.iTunes.000a959af38a.plist
/Users/davidhunt/Library/Preferences/com.apple.iTunes.plist
Oh, there's that file:
/Library/Audio/Plug-Ins/HAL/Digidesign CoreAudio.plugin/SupportedApps.txt
// SupportedApps.txt
// This text file is used by the Digidesign CoreAudio driver to determine
// which apps are allowed to use it. Only apps listed in this file will
// be allowed to use the CoreAudio driver. APPLhook iTunes@ APPLEMAG Logic Audio@ APPLMOUP Digital Performer@ APPLa-lv Ableton Live@ APPLRSon Reason@ APPLRSa2 Reason (Digi Edition)@ APPLauFM Bias Peak@ APPLTVOD Quicktime@ APPLKeyG Final Cut Pro@
Well, there's iTunes listed in it.
I'm suspicious of QuickTime (for no apparent reason).
Pulled out of the above big plist output:
/Library/QuickTime/DivX 5.component/Contents/Info-macos.plist
/Library/QuickTime/DivX 5.component/Contents/Info.plist
/Library/QuickTime/Flip4Mac WMV Import.component/Contents/Info-macos.plist
/Library/QuickTime/Flip4Mac WMV Import.component/Contents/Info.plist
/Library/QuickTime/TSCC.component/Contents/Info-macos.plist
/Library/QuickTime/TSCC.component/Contents/Info.plist
/System/Library/Frameworks/QuickTime.framework/Resources/Info.plist
/System/Library/QuickTime/ApplePixletVideo.component/Contents/Info-macos.plist
/System/Library/QuickTime/ApplePixletVideo.component/Contents/Info.plist
/System/Library/QuickTime/QuickTimeComponents.component/Contents/Info-macos.plis t
/System/Library/QuickTime/QuickTimeComponents.component/Contents/Info.plist
/System/Library/QuickTime/QuickTimeFirewireDV.component/Contents/Info-macos.plis t
/System/Library/QuickTime/QuickTimeFirewireDV.component/Contents/Info.plist
/System/Library/QuickTime/QuickTimeH264.component/Contents/Info-macos.plist
/System/Library/QuickTime/QuickTimeH264.component/Contents/Info.plist
You might try zapping some of those.
Oh, you downloaded the Sims 2 via P2P using Azureus, just like me. Ya might want to take down yer trace file now
I'm surprised there's not something more in /var/log.
cd to /var/log, type: touch asl.log
type: chmod 777 asl.log
I'm not sure what asl.log stands for, but it sure gets a heck of a lot of stuff on my system.
That's it for now, you've got to plug away at those plist files. Someone just posted about a plugin (they are also a likely culprit). These are all the OSS references:
5204 iTunes NAMI "/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServ ices.framework/Versions/A/OSServices"
5204 iTunes NAMI "/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServ ices.framework/Versions/A/OSServices"
5204 iTunes NAMI "/System/Library/Frameworks/CoreServices.framework/Frameworks/OSServices.framew ork/OSServices"
5204 iTunes NAMI "/System/Library/Frameworks/CoreServices.framework/Frameworks/OSServices.framew ork/OSServices"
Here are the plugins from the big list:
grep NAMI Trace-iTunes.txt | grep -i plugin|sed -n '/NAMI/{ s/^[^"][^"]*"//; s/"//; p; }' | sort -u
/Library/Application Support/Missing Sync for Windows Mobile/Plugins/Address Book via iSync.app/Contents/MacOS/Address Book
/Library/Application Support/Missing Sync for Windows Mobile/Plugins/TimeSync.app/Contents/MacOS/TimeSync
/Library/Application Support/Missing Sync for Windows Mobile/Plugins/iCal via iSync.app/Contents/MacOS/iCal
/Library/Audio/Plug-Ins/HAL/Digidesign CoreAudio.plugin/Contents
/Library/Audio/Plug-Ins/HAL/Digidesign CoreAudio.plugin/Contents/Info-macos.plist
/Library/Audio/Plug-Ins/HAL/Digidesign CoreAudio.plugin/Contents/Info.plist
/Library/Audio/Plug-Ins/HAL/Digidesign CoreAudio.plugin/Contents/MacOS/Digidesign CoreAudio
/Library/Audio/Plug-Ins/HAL/Digidesign CoreAudio.plugin/SupportedApps.txt
/Library/Audio/Plug-Ins/HAL/JackRouter.plugin/Contents
/Library/Audio/Plug-Ins/HAL/JackRouter.plugin/Contents/Info-macos.plist
/Library/Audio/Plug-Ins/HAL/JackRouter.plugin/Contents/Info.plist
/Library/Audio/Plug-Ins/HAL/JackRouter.plugin/Contents/MacOS/JackRouter
/Library/Audio/Plug-Ins/HAL/JackRouter.plugin/Contents/Resources/BlackList.txt
/Library/Audio/Plug-Ins/HAL/iSightAudio.plugin/Contents
/Library/Audio/Plug-Ins/HAL/iSightAudio.plugin/Contents/Info-macos.plist
/Library/Audio/Plug-Ins/HAL/iSightAudio.plugin/Contents/Info.plist
/Library/Audio/Plug-Ins/HAL/iSightAudio.plugin/Contents/MacOS/iSightAudio
/System/Library/Extensions/IOAudioFamily.kext/Contents/PlugIns/AOAHALPlugin.bund le/Contents
/System/Library/Extensions/IOAudioFamily.kext/Contents/PlugIns/AOAHALPlugin.bund le/Contents/Info-macos.plist
/System/Library/Extensions/IOAudioFamily.kext/Contents/PlugIns/AOAHALPlugin.bund le/Contents/Info.plist
/System/Library/Extensions/IOAudioFamily.kext/Contents/PlugIns/AOAHALPlugin.bund le/Contents/MacOS/AOAHALPlugin
/System/Library/LocalePlugins
/System/Library/LocalePlugins/ThaiTextBreak.localePlugin/Contents
/System/Library/LocalePlugins/ThaiTextBreak.localePlugin/Contents/Info-macos.pli st
/System/Library/LocalePlugins/ThaiTextBreak.localePlugin/Contents/Info.plist
/System/Library/LocalePlugins/ThaiTextBreak.localePlugin/Contents/Resources
/System/Library/LocalePlugins/ThaiTextBreak.localePlugin/Contents/Resources/Engl ish.lproj
Good luck! -
Not enough memory error when disconnecting device on a virtual com port
I maintain a large application that collects data from many data source channels (using coustom hardware read thru a conventional COM port) and I am adding a GPS data source on a USB port using a virtual COM port driver. The application runs 24/7/365 and works well including the GPS data, if undisturbed. However, the application needs to tolerate a physical disconnect and reconnect of the GPS device without user intervention. When I disconnect the GPS, the application becomes unresponsive most of the time (the mouse responds and other programs that are open on the desktop work fine). I abstracted the serial code and made a separate vi (below) for testing. When I disconnect the GPS from the COM port, I get a "Not enough memory to complete this operation" message 9 out of 10 times and the vi is unresponsive until I clear the error message (the tenth time it continues working). I built the vi this way to collect data continuously. I suspect that this is the problem with the full app but I don't see the Not enough memory message there and therefore the full app does not respond and must be terminated via Task Manager. The full app runs full screen mode.
The LV app runs on Windows XP and LabView 7.0 (the client doesn't want to upgrade).
I have tried probing the error message lines at all points in the vi but they don't show anything when the 'Not enough memory' message occurs (they show the expected device not found error after clearing the error message).
Any suggestions would be greatly appreciated,
Mel
Still learning LV......
Please post any code suggestions as graphics as I don't have access to any version of LabView newer than 7.0.
Attachments:
SerialPortRead.png 22 KBJeff·Þ·Bohrer wrote:
First, there likley WAS human intervention that caused the GPS device to be removed. That wont happen when you lock the device inside a cabinet with the rest of the test system. Physical access control first! If someone goes and mucks with your experiment setup while its running, that's a "poor Labratory procedure" not a "new software requirement"
I think he was meaning to say without user intervention on the software side.
I have seen odd behavior if you disconnect from a com port whilst LV still has the port open. There are a couple things I myself woud try, being the experimenting type that I am. Perhaps setting up a com port check to see if it has a valid connection before polling for data. If not then a blank case or some other generic code.
The issue with this would be if it became disconnected while LV was polling data. Hard to get around this condition. Is there a way that the cause of the of the connect/disconnect (whether human or otherwise) could be set up so that a signal can be sent to the controlling system (pre-disconnect and post-connect) to trigger an event to handle the software side? A simple signal switch or something. Just thinking out loud. Withoug knowing all the particulars, it's hard to make detailed recommendations.
Doug
"My only wish is that I am capable of learning each and every day until my last breath." -
"There was not enough memory" error message when saving DNG and Jpeg
PC/Windows XP Pro. Pentium 4/2Gb RAM.
I am constantly getting memory errors when trying to save batches of images from ACR4 either as Jpegs or DNGs.
A couple of images in to the batch a small window appears with a list of the files and next to each of them is the line: "There was not enough memory."
These are 220Mb TIFF files that are processed in Hasselblad's Flexcolor on the same computer. I can process an entire folder full (sometimes 50 images) without a hitch in Flexcolor, but Bridge/ACR4 and CS3 can't handle any reasonable number of images.
Could it be something in my settings? For the record, they are:
In Bridge, under Edit/Preferences/Camera RAW preferences, Camera Raw Cache is set to 10Gb. Jpeg and Tiff handling boxes are both ticked.
Under Edit/Preferences/Cache, Cache Size slider is slightly over half way to the right.
In addition, I have CS3 pointed to a formatted 500GB scratch disk all to itself.
And CS3's RAM is set to 80%.
Finally, this computer is used for nothing else except image editing.
Any ideas?
Thanks.
D.Thomas,
Thanks for the reply.
If you mean by "Public Beta", did I download the 10.4Mb plug-in (as per John Cornicello's link above) and install it at Program Files\Common Files\Adobe\Plug-Ins\CS3\File Formats in place of the old plug-in, then yes.
I always run ACR4 via Bridge, never via CS3. CS3 always comes after conversion in my workflow. Also, I like to give Bridge/ACR a free run of available resources. Nothing else is ever open when I'm running them.
In CS3 under Edit/Preferences/File Handling, under Image Previews I selected 'Never Save'. Not sure if this affects ACR though.
Also, as per the suggestion in the article referred to in my last post, I removed the tilde ~ to activate the Bigger Tiles plug-in. CS3's memory % is now set @ 90%.
The only thing I haven't done is to activate the Microsoft 3Gb switch. I can't find instructions that are clear enough. Also, it may be that it makes no difference when running Vista 64bit, as I am.
For what it's worth, with these fine tunings, CS3 now executes the Retouch Artist's Speedtest in 20 seconds, a shade faster than before. This is extremely fast, so my setup should not be the problem here. I hope! ;-)
Finally, is there any point in trying LR? Or is its file saving/cache setup the same as ACR's?
Thanks for taking an interest in my case. I'm very happy to be a guinea pig since I will constantly have to process large numbers of files and I'd like to overcome this problem
Many thanks.
D.
Maybe you are looking for
-
Dialog progg....(matching Field values from Table)
Dear All, I have one screen 0100. At any stage, a field value entered in the screen field by user, should be matched from say EKBE table value with tolerance of 10-15%. If it doesn't matches, Error message should display in a dialo
-
Show Error string for all the components in a form at a time
How do I show all the error strings for all the components in the form when the submit button is clicked?
-
Automated Way of Creating VPN Services in Snow Leopard?
I'm looking for a way to have a file/script that can be executed by a user to create a VPN Service for connection to our Cisco VPN server at work. Our IT department believes that by not passing out the Shared Secret (in plaintext), they are increasin
-
Kazehakase with full-text search in history using Hyper Estraier
A guide for Kazehakase with full-text history search using Hyper Estraier I adopted qdbm and submitted hyperestraier in AUR, so you can enable full-text search frature by installing Hyper Estraier from AUR and rebuilding Kazehakase using srcpac or ya
-
Can't use Quartz on phone, compile works but build fails..what am I missing
Just simple lines like... CGContextRef context = UIGraphicsGetCurrentContext(); CGContextSetRGBStrokeColor(context, 1.0, 1.0, 1.0, 1.0); CGContextSetLineWidth(context, 2.0); fail when I try to run it. Linking.... "_CGContextSetLineWidth", referenced