Not enough memory space

Dear All,
We have a situation where a query made on a cube is used in APD.
The data coming from this query, is aggregated and then sent to a transactional DSO to move it forward to another DSO from where it goes to PCM through informatica.
Cube -> Query -> Aggregation -> Transactional DSO -> DSO -> PCM
Right now we are facing problem in aggregation. We have 7 million records and when we summarize we use to much off internal table space and get a dump, not enough memeory space.
Any suggestions
Regards,
Jack Silverz

Hi jack,
I have faced this problem and it has to do with the number of records that a APD can process.
If it runs inot millions it wont be able to aggregate.
I need to find a SAP link to back my point but its a headsup for you.
Regards,
Suyash

Similar Messages

HT1296 My iphone 4S is acting very odd it says that I have not enough memory space so can not take pictures, sync. I went to apple store

Today went to the apple store and explained the problem, they said to do these log on these3 steps
1- log on these links: support.apple.com/kb/ht1386
2- folowed by: support.apple.com/kb/ht1414
3- setup as a new iphone
I started did download new version of itune but still unable to sync saing not enough memory space
Only 7 apps, unable to download games 1 magazine, 18 pictures, and lots of songs about 1.000plus
Getting very frustrated.
Thanks Vickie

An iPhone is just like any computer when the operating system detects that storage is low it prevents any further updating to avoid compromising the installation
You have too much on too smaller iPhone something will have to be deleted to proceed
Restore as new

Not enough memory space..PLEASE HELP ME.

Hi, I wanted to update my iPod nano, but it says there isn't enough space. I have too many songs on my itunes. How can I update it without having to delete some of my songs? I have two podcasts, so I think that is what is taking up the room. I just wanted to be able to hear my podcasts on my ipod not only on the computer, so i created a smart playlist for it because that is the only way i knew how to listen to them. sorry this is so long but I really need advice!
thank you so much!

Since the library is too large to fit onto the iPod, iTunes will create a new playlist that fits.
You can do it the same way.
Create a new Smart playlist.
Set it to limit to 3700 MB at random.
Open iTunes prefs -> iPod and select Automatically update only this playlist.
Update the iPod.
When you want to change the music on your iPod, select this playlist, select all the songs and press Delete.
It will get filled again, then connect your iPod and update it.
You can change this playlist around. For example, I also add My rating is not one star.
I rate songs I do not want on my iPod as one star. They will not get put back onto the iPod.
You could add to this Not heard in the last 2 (or 1 or 3 or ?) weeks (days/months) to keep your music rotating.
If you also have podcasts, set the playlist above to a smaller size so the podcasts will fit.

Not enough memory space for clips recorded (transfer from DV to imovie)

Hi.
This is one question that I have always wanted to ask, but since I hard edit a long video clips, so I have been procrastinating to ask this question.
Recently, been asked to film a childcare performance for a friend. estimated amount of clips I would captured will be at least 1 hr-worthed.
Here's the thing, my powerbook has a memory of 40G, I think I am left with only 2-3 G to play with. Mostly taken up by software.
However, I do have an external hard drive that have about 30G-worthed of memory still.
But the question is how to import the DV clips from video cam to powerbook, tapping into the external hard disk space instead of the internal hard disk?
I am working on a very urgent timeline. SO will really appreciate your help and advise on this. Thanks very much!
Cheers.

The problem with this is that you have to have iMovie
installed on the external hard drive first. After
that, you would open iMovie (external drive) and
create a project (external drive) and work on it
there (external drive).
Yeah, the clips go to your internal disk because
that's where you have iMovie. To use your external
drive for iMovie, you most likely need to have it
there (external) first.
Sorry, Cristobal, but that's incorrect. The location of the iMovie application does not control the location of the iMovie project. The iMovie application should be allowed to remain in the Applications folder, where it was installed.
The user decides the location of the project when creating a new project. When you choose File > New Project, the save file dialog that opens lets you navigate to any drive, and save the project in any folder of that drive. It works exactly like every other Mac application.
All video imported from the camera is stored inside the currently-active project, whichever drive that project resides on. It's not necessary to tell iMovie where to import the video. It goes in the active project.
If you want to move an existing project to a different drive, that's possible too. Just drag it there and discard the project on the source drive.
Karl

"Not enough memory" to install Adobe Premiere Elements 12

I've just switched to a new internal harddrive so I'm not sure if there's something more I need to do in order to be able to install the program above, but when I try to download it from Annat material för nedladdning - the 64bit version for Windows (8.1) - and when I open the installing file, it says there's not enough memory/space on my harddrive, when there obviously is. I feel like this has happened before, but this time I don't know how to solve it.
I don't know, it might be too much of a general question for this forum but hopefully someone can help me out...

Jollestudio
As a point of reference, how much free hard drive space is at the location to where the installation files are pointed?
When you start the download, if you are saving the installation files to the Desktop, then try saving them to My Documents instead. See if that works for you.
Also, consider using the following web site as the source of your Premiere Elements 12 installation files
Adobe Photoshop Elements 12 Direct Download Links, Premiere too | ProDesignTools
Just make sure that you carefully carry out the web pages "Note: Very Important Instructions" so that you do not get an Access Denied message.
You can insert your purchased Premiere Elements 12 serial number into these files during installation to make them your own.
Please let us know if any of the above works for you. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

"Not enough disk space" when there seems to be (+ rapid memory consumption)

[Note: I originally posted this in the iDVD section, but due to an answer I got there to another question and further conversations with my daughter, figured out this is probably an iMovie question?]
I'm a newbie to iDVD and iMovie and Forums (my last Mac was a Performa 6360--still using it for the family budget). I got my daughter a MacBook as a graduation gift. She is using it to combine movie inputs from a wedding/reception that come from digital camreas and a couple of video cameras. We went to Flip4Mac to get the necessary software/features to import .wmv files (only way we could download one of the video cameras was by going from PC to Mac--can't remember if it was a Sony or Canon).
Issue: When she tries to import vidoes into iMovie HD 6.0.3 which have already been transferred to her computer, she gets: "The file could not be imported: There is not enough disk space to import Macintosh HD/Users/julie/pictures/iPhoto Library/Originals/2007/Roll8/CIMG1442.AVI" [She says this is about a 4 min. clip.]
Basically the question is how to get more room on her disk to import and to save? She seems to only be able to Save--she can't Save Project as an option because it says she doesn't have enough disk space (she's already deleted the Trash). Help says you need to have more than 400mb of free space or it gets difficult but the indicator shows 28.8GB free space left...so there seems to be some kind of disconnect?? (Or maybe we're talking apples and oranges?)
[Even more disturbing, just in the last couple of days with only a little time spent on the computer, the 28.8 GB has dropped to 2.3GB--obviously there is something she is doing that she is not aware of or shouldn't be doing that is consuming memory at a rapid pace.] On top of that, she also gets the same error message when she tries to burn the project onto a disk using iDVD???
I went through the first 5 pages of the forum and couldn't see a similar problem, but then I may have not known what to look for?
Any help would be greatly appreciated...she's trying to give the DVD as a Wedding gift--somewhat belated.

Hello Karstn Schluter,
This is fm's daughter who is havin ghte difficulites. at the end you tell me to try to answer 1-8 so i will try.
1- how can you tell if the avi is containing divx? or not?? do I need to just keep this in mind when importing these files
2- I have not brought in an external drive. I did try making my laptop computer a harddrive so I could import my imovie poject to my eMAC at one point, but it was not allowing me to do that either. Because I had to have it in DVD form or something
3- No I did not segment the internal drive....sorry How do you do that??? Right now I am trying to find out what is taking up all the memory and Hard Disk Drive space....i do not know how to do that either....Do you know how???
4-Yes I know flip4mac is for wmv....I guess what that question was emplying was that I also have wmv files that I am trying to import to imovieHD and that is not working either...I can get my avi to get into imovieHD, but not my wmv. files
5-THank you for the tip with the trash then another question to this one how do you delet projects that are taking up memory that are no longer in use?
6-Thank you for the tip...so then ignore the not enough disk space.....how can you alter the disk space so that you can save the project under save project as and not just save project?
7- Sorry my dad was miss informed I cannot import the wmv. files to imovie and I cannot import imovie to iDVD I only have transferred one and then all of the other files are not seen as movies so I can not import them?? Does that make since
8- When we were useing the Sony Camera originally we could not import the video to the MAC because it did not have the correct firewire cable and it would not been read onto the MAC computer. So, we have to buy the flip4mac equipment so that I would be able ot download the inoformation to the computer by a wmv.file dvd so we are having difficulites trying to import that file.
I hope these answers clear up the question a little bit more and sorry that your answers brought out more questions. Thank you very much for helping me. I was using a different program in my college class so changing to imovie and idvd has been a huge struggle for me. Thank you once again.

Not enough memory or disk space in excel and word office 365

I have windows 8.1 and am having huge issues with excel and word in office 365.
When i download a document i am unable to open as message reads cannot open as not enough memory or disk space.
I have plenty of disk space and memory however have searched this and the following has been answered BUT I CANNOT UNDERSTAND This and need HELP with step by step instructions on how to do please;
To resolve the issue, refer to the methods below:
Go to this key on Registry Editor (Run | Regedit)HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User
Shell Folders
change key Cache to something like C:\Windows\Temp
You might also right click on the file with file explorer, choose Properties, then General tab and click on the Unblock button.
Some of our customers found it sometimes a permission problem.
cmd => dcomcnfg
Click >Component services >Computes >My Computer>Dcom config> and select micro soft Excel Application>
Right Click on microsoft Excel Application>Properties>Give Asp.net Permissions
Select Identity table >Select interactive user >select ok
However i do not understand a word of the above or how to do PLEASE HELP this is extremly frustrating as i am doing correspondence and I am unable to access any files.
Thanks

Hi,
You must have read this thread:
http://social.technet.microsoft.com/Forums/en-US/9773a7c4-29a8-48ff-9d16-e1ca4c478610/excel-2013-microsoft-excel-can-not-open-or-save-anymore-documents-because-there-is-not-enough?forum=officesetupdeploy
To detail the steps, please do as I describe:
Important
This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the
registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry,
http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
To open the Registry Editor, please press Win + R, type regedit in the blank box, press
Enter. / Or we can type regedit.exe in Windows 8.1 Search, you'll find it easily.
Now the Registry Editor is open.
Then we see the pane on left, expand the following path:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
Then we can see a list on right, find Cache, right click on it, click
Modify..., under Value data, change the value to something like
C:\Windows\Temp, click OK.
Exit Registry Editor.
As for "You might also right click on the file with file explorer, choose Properties, then General tab and click on the Unblock button." Just find the file, right click on it, choose
Properties, under General tab, if you see a
Unblock button, click on it.
"Some of our customers found it sometimes a permission problem.
cmd => dcomcnfg" Do the following:
Press Win + R, type in cmd in the blank box, press
Enter.
In the new black-background window, type in dcomcnfg, press
Enter.
Then the Component Services window will pop up, on the left pane, expand
Component services -> Computes ->
My Computer -> Dcom config -> and select
Microsoft Excel Application, right click on it -> Properties ->
Identity tab -> Select The interactive user ->
OK.
I hope I've explained the steps clearly.
Good luck.
Regards,
Melon Chen
TechNet Community Support

Cannot print to pdf -There is not enough memory or disk space to repaginate this document

I don't know if this is an Adobe pdf issue or just a Word 2013 thing.
But I'm now using Word 2013 on Win 8.1, 64 bit, 8Gs of Ram and when I go to print a few select pages of my document a message pop out at me saying
'There is not enough memory or disk space to repaginate this document'.
When I had Win 7, the same amount of Ram and Word 2010, I print incrementally to pdf okay. Granted, sometimes certain pages print blank and I have to print it again after restarting the computer but at least I got stuff printed to pdf.
Now I go to print to pdf as little as 1 single page and that message just pop right up like a really bad penny. As far as I can tell, Adobe is up to date unless I'm missing something.
Has anyone ever had this issue and got it resolved?

Thanks TSN.
(how to check if Ram is full )?
the memory is 8 G Ram. I only have office 365, Acrobat X1 pro, Gimp, and Inkscape installed. The problem was there before I installed the last two.
I posted on Microsoft as well and the response was that since I could print the document on regular printer without any issues, then it is an Adobe issue. Using the toolbar is pdfing the full document. That takes a very, very, long time besides at the end of it, many pages are blank in the pdf file and then it is a matter of restarting the computer, re-pdfing until I am tired. So I print the pages incrementally. Any other way to pdf select pages without any problems?

Opening attachments - ERROR MSG - 'Not enough memory or disc space'

Hi
I'm trying to open a word .doc from my Entourage email account and it comes up with the error message ' Not enough memory or disc space'. My hard drive has 119 GB free - so I'm thinking it may be a memory issue.
How do I deal with this/clean up my computer??
I just turned my computer on for the day and got this message. The only programs I've got running is Safari, entourage, word and adobe reader.
Thanks.
Margie

Have you tried Epson support for that E-Web Print application?
Also, I am curious if Epson installed an add-on for Firefox for that E-Web Print application? ''Thus prompting you to ask about it in the Firefox support forum.''
At this point the best I can offer you is a suggestion to reset your printer prefs in Firefox to see if that will help with that issue.
https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox#w_reset-all-firefox-printer-settings

Not enough memory of disk space in Word?

I am currently working on document in Word, it is only three pages long and has seven other photos in the document. When copy and pasting photos from iphoto I get the message that 'there is not enough memory or disk space to complete the operation.' What am I doing wrong? This didnt happen on my desktop Mac. Any help would be greatly appreciated.

"There is not enough memory or disk space to complete the ...

My brand new MBP 13"got the error "there is not enough memory or disk space to convert this document". What gives? Help please!

I am trying to use mail merge in Word for Mac on My brand new MBP 13". And I get the error "there is not enough memory or disk space to convert this document". What gives? Help please!

Why do I get there is not enough memory...: Apple Support Communities
Error message in MS Word opening a .docx file "There is not enough - Microsoft Community

MSword2003: error-"there is not enough memory or disk space to complete the operation"

One of my files can't be opened because of the error"there is not enough memory or disk space to complete the operation"
i have tried every thing....
renaming the template from normal.dot to old.dot...
disk cleanup
deleting all the temp,%temp,internet files, cookies.
but nothing working .....
please help

This forum is for questions and discussions about the TechNet Wiki. I will try to move your question to a more appropriate forum, dealing with Office technical issues.
Richard Mueller - MVP Directory Services

"There is not enough memory or disk space..."

I am trying to open a .docx file with Word 2004 version 11.6.6 (purchased). However, I always get a message saying, "there is not enough memory or disk space to convert this document" when there is plenty of memory. I have a MacBook Pro version 10.6.8. I downloaded the .XML conversion app. from the Microsoft website to no avail. However, I can open the same file on my PowerMac G5 also with Word 2004 and the same .XML conversion app. I downloaded for my MacBook Pro from the Microsoft website. I checked the conversion log of the .XML converter and it says:
Start time: 2012-02-05 00:12:59 -0500
Converting file: /Users/xxxxxxxxxxx/Downloads/Formulario-Guía Observación de la Escuela-4.docx
objc[1541]: Class NLAssertionHandler is implemented in both /Applications/Open XML Converter.app/Contents/SharedSupport/wordcvtr and /Library/Application Support/Microsoft/Office Converter Support/Open XML for Word.framework/Versions/12/../../../MicrosoftComponentPlugin.framework/Versions /12/MicrosoftComponentPlugin. One of the two will be used. Which one is undefined.
Conversion failed
End time: 2012-02-05 00:13:01 -0500
What gives? Is the file I'm trying to open corrupt or is there some kind of update I need for my Office Word program? How can the file be opening fine on one of my computers, but not the other newer one?

I also run Word 2004 and OS X 10.6.8 and have a .docx file that the Microsoft Open XML Converter 1.2.1 will not convertet, yet the same problem .docx file will convert fine on a 10.4.11 OS X Mac.

Words - Not enough memory or disk space

In Words I receive message :
There is not enough memory or disk space to complete this operation?
Any Idea what can i do?

How much physical RAM is in your Mac? How much free disk space is there? What other apps are running along with Word.

"Not enough memory or disk space" -can't be true

I'm trying to open a doc file with images. The size of file is 1MB - when I try to open in word or double click on it I get this message; "There is not enough memory or disk space to complete this operation" - which makes no sense. Could the file be corrupt? Any ideas? Thanks in advance.

Yes. This file is probably corrupt. You may be able to open it "as text" and recover the text.
"Out of memory" is usually a catch-all error message that almost never means what it says.

Not enough memory space

Similar Messages

Maybe you are looking for