Not enough physical ports - error message??

Hi
I just started to get an error message dialog box when I open Soundtrack Pro on my quad core G5. The message says "the current output device does not have enough physical ports for this document. Some outputs may not play back as a result".
I don't understand this - can anyone help. If I click OK then for sure, not audio comes out of STP.
Running version 1.1 on OSX 10.4.10
This hasn't happened before. It happens either when I open a new STP file with nothing in it, or when sending from FCP.
Thanks
Neil

First of all, thanks for the replies.
I gave it another try today; I deleted the old files and ripped them to my computer again, this time using Windows Media Player instead of iTunes. I tried transferring them to my iPod again and this time it worked. As always iTunes had to convert them to files that it could read, but then it took just a few seconds and all of them made it to my iPod.
I don't know what the problem was the first time around. I checked the file sizes, and the largest was 4.2 MB. There were about 11 songs. It was just a typical audio CD and its total length was 44 minutes.
I guess from now on I'll just import CDs with Windows Media Player and then let iTunes convert them so that I can have even more files on my computer. Oh well. If that's what it takes... Sometime when I have a lot of time to fool around I'll try to see if something is going wrong when I'm importing them with iTunes.
Thanks again for the responses!

Similar Messages

"Not enough memory available" error message when accessing Shopping Cart

Can someone please help, as iTunes and Apple support can offer none at all. When I try to purchase songs or albums, or subscribe to podcasts, I get an error message that reads: "We could not complete your iTunes store request. There is not enough memory available. There was an error in the iTunes store. Please try again later."
This has been going on for days. I've switched to 1-click shopping, uninstalled and reinstalled iTunes, turned the machine on and off, and still get nothing. There is plenty of hard drive space, and have tons of free RAM.
Any ideas?
Thanks!

I just noticed all three of us have a Dell computer....did either of you recently update your BIOS? I did and just after is when I noticed the problem with iTunes that we're all having. I realize it could be just coincidence, but I can't think of anything else that changed that may have caused this problem. I was considering reverting to the old BIOS, but have done some research (mainly on forums) and don't see any mention elsewhere of this, although alot of people mentioned going back to the old BIOS for other reasons. If I can't find anything else in a day or two, I'm going to uninstall and re-install itunes. I'll report back if this helps or does nothing.
thanks,

"Not enough free space" error message when there is enough free space

Last night I decided to put a few more songs on my iPod, but when I tried I got the following error message:
"The iPod cannot be synced because there is not enough free space to hold all of the items in the selected playlists."
I know that is a load of crap because it says I have 2.59 gigabytes of free space, and I'm only trying to put 11 or 12 new songs on there. I have checked the settings to make sure that it isn't trying to upload my entire iTunes library, and it's not. I have the latest version of both iTunes and the iPod software. I've tried restarting, reinstalling, and all that... Any suggestions?

First of all, thanks for the replies.
I gave it another try today; I deleted the old files and ripped them to my computer again, this time using Windows Media Player instead of iTunes. I tried transferring them to my iPod again and this time it worked. As always iTunes had to convert them to files that it could read, but then it took just a few seconds and all of them made it to my iPod.
I don't know what the problem was the first time around. I checked the file sizes, and the largest was 4.2 MB. There were about 11 songs. It was just a typical audio CD and its total length was 44 minutes.
I guess from now on I'll just import CDs with Windows Media Player and then let iTunes convert them so that I can have even more files on my computer. Oh well. If that's what it takes... Sometime when I have a lot of time to fool around I'll try to see if something is going wrong when I'm importing them with iTunes.
Thanks again for the responses!

New HD - not enough free space error message

I have a Power Mac G4, dual 866mhz, 2gb RAM. I recently purchased (2) 2TB HDs to use as a file server. The drives install fine and show up on the desktop. Whenever I try to drag files to it, I get an error message saying there is not enough free space. There is nothing on the drive. I tried reformatting with different formats and it still does not work. Any ideas?

Yes I do, The card works fine. Both drives show up and are able to be reformatted. The problem is when I go to drag files. It is 1.8TB free, but I still get an error saying there is not enough free space.

Clean Install G4 Dual 1 GHz-Not enough Disk Space Error? -SLOW USB copies

HELP puhleeeeze!
This seems to be an issue on various sites with no one being able to figure out what is the cause and a solution. One person stated his problem went away with a fullwipe and clean-reinstall of everything. But this is what I did already.
What is the reason for the "Not Enough Disk Space" error message when both my hard drives have gigs of space available. If I had hair I'd be pulling it out by now! When trying to copy a file to my 2 internal hard drives that have a lot of space available, but only by the USB port?!!
I have a Power Mac G4 Mirrored Door (MDD) Dual 1 GHz with a clean install of 10.5.8 from the Original Mac OS X Leopard DVD. Both internal hard drives are 60GB and 100GB. The hard drives were wiped clean with Disc Utilities and reformatted to Mac OS Extended (Journaled). The Power Mac only has the OS and a few music apps installed. Easily over 30 GB of space left on the the main G4 interal hard drive and about 75 GB on the other internal hard drive.
The error seems to only happen when I connect a USB flash drive to the USB port. I tried to copy a 50MB update to the desktop-"Not Enough Disk Space" error message happened.
I know that the G4 MDD Power Macs only have USB 1.0. Is this a USB 2.0 issue? Another issue is that it has very slow USB speed (dramtically slower than normal USB 1.0 copying of files. And this is only when it is successful. Is it a USB format issue? I know I couldn't get an external USB 2.0 drive to mount on the Power Mac at all. Disc Utilities could see it but it still would not mount. I have a friend who has an older G4 single processor Mac that doesn't experience these issues with its USB 1.0 ports.
Now here's the kicker:
If I put in a CD disc in the DVD/RW drive, it copies with no problems to either hard drive. If I connect to the Power Mac via the ethernet network, files can copy with no problems. But any USB connection - I get a the "Not Enough Disk Space" error message. I know this is an old mac... but it's never been problematic until this latest wipe and update to Leopard 10.5.8.
Is there a solution to this? Any and all help, feedback, comments, thoughts are greatly appreciated in advance!!!

Hello everyone,
Ok, I did the ultimate task. I erased the hard drives, AGAIN. Just to start fresh from scratch. Hard drives were erased. Did a new install of Mac OS 10.5. And all was well. I could copy with no problems. I gave the computer to my friend and all was good for a couple of days and then the issue came back again. He couldn't copy anything to his internal hard drives and we received the "Not enough disk space" error message! I was baffled. A complete hard drive erase 2 times, 2 fresh Mac OS 10.5 installs and it works for a few days and then coping to HD we got the same **** problem again! THEN - I remembered that the PRAM battery was dead on this G4 Mirrored-Door Dual 1GHz PowerMac. I had recommended that he get a new battery, because this computer would always have the incorrect date and time after every restart. So with recalling this, I had him reset the PRAM by holding down the CMD+OPT+P+R keys after a restart (start-up Chime). I had him hold the keys for at least 3 start-up-chimes. Soon as the G4 Power Mac started up everything was fine again. He was able to copy files to his hard drives again with the "Not enough disk space" error message.
So everyone! Try zapping your PRAM (resetting the PRAM) and see if this solves your problem. I told my friend to get a new PRAM battery to replace the old one that is completely dead. I have not heard back from him. I will ask him again if the problem has come back.
If that fails: My only other solution would be to consider that it is possible that Mac OS 10.5 has a conflict or issue with the G4 Processors and maybe it is safer to install Mac OS 10.3 or 10.4. Because this problem only has occured after installing Mac OS 10.5, the highest version of the Mac OS the Dual 1GHz Mirrored-Door G4 can be installed.
Cheers,
B

"Not Enough Storage Space" error - Acrobat 9 Pro

Hey gang,
I get a "not enough storage space" error message when trying to install Acrobat 9 Pro. I've got administrative rights and I'm trying to install from my local drive. Any ideas? Thanks! I've attached a screen shot of the error message.
My system particulars:
Windows 7 Pro (64-bit)
Acrobat 9 Professional
8 GB RAM
132 GB free on hard drive
Thanks again,
-terry-

I cleaned the Temp directory and rebooted, making sure to kill the processes in the Startup folder. It went smooth like a gravy sandwich. Thanks for the help!
-terry-

"Not enough free space" error. Prevents sync.

My 4th generation iPod Touch has recently started throwing a "not enough free space" error message every time I try to sync. I haven't added and large files recently, and since getting this error, I have deleted many large files from my Ipod. I still get the message.
The exact error message is:
"The iPod [my ipod name] cannot be synced because there is not enough free space to hold all of the items in the iTunes library (additional 19GB required.)."
My iPod is showing 17.4GB of free space. I'm syncing why wire. Intersetingly, I sync my library to an 120GB regular (non-Touch) iPod without issue.
Any suggestions? I'm about at the end of my rope.
Thanks.
roorider

Here's what worked for me, finally.
In iTunes, I unchecked Apps, Music, Movies, TV Shows, Podcasts, etc. so that they wouldn't snyc. Then I syned my iPod. The synce worked fine. Then, I rechked all of the items I previously unchecked and synced again. No error message this time.
It appears that all of the settings in my apps were reset to default after the sync, and perhaps even game data (I rarely play games, so I don't what, if anything it would save), And my home screens were totally unoriganized, so I had to rearrange all of those back to my personal taste, but all is back to normal now.
roorider

Bridge CS5.1 is not respoding. Getting error messages that there is not enough memory and need to clear central cash.

On MAC OS X 10.7.5. Editing raw files in Bridge and have been getting error messages every time I open Bridge that there is not enough memory. Other messages are to clear the central cache. Can't find the central cache on my system. Please help!

Have you tried completing the pano without selecting edge fill. Then crop the result or use the clone stamp to fill the blanks.

Not enough physical memory is available to power on this virtual machine with its configured settings.

hi ... My opering system is windows 8.1 and my system RAM is 6 GB with intel core i3 processor...
I got error in vmvare " not enough physical memory to start virtual machine. then after some day i visit at your webside and read the bolg about this error solution and i uninstalled the microsofts update like
"KB2995388" then reboot the system, after that i search config.ini file in drive "C:\Program Files (x86)\VMware\VMware Workstation" but i did'nt got this file, so i created a new "config.ini" file and write one line
vmmon.disableHostParameters = “TRUE” and save the file , then i copied this file to vmware workstation , like this path 'C:\Program Files (x86)\VMware\VMware Workstation' after that i opened my vmware and power on virtula machine but still i getting same error like not enough physical memory..........plesae any one can help me ? and give me a better solution to solve this problem ?

Welcome to the Community,
without any details about the VMware Workstation version you are using and the blog you read it's pretty hard to help. Anyway, the issue you mentioned was resolved with VMware Workstation 10.0.4 (see VMware Workstation 10.0.4 Release Notes), so in case you are running an older version it may be worth updating.
André
Message was edited by: a.p. - Fixed typo in version number 10.0.4 (instead of 10.4)

": Not enough physical memory for SHM_SHARE_MMU "

Dear ALL,
": Not enough physical memory for SHM_SHARE_MMU "
This is an error message which occurs while trying to mount the database on startup. I've two database running of solaris. DB1 is running with 700M shared pool size. I want to run the DB2 database with 400M. But if i specify 400M shared_pool size on DB2 it is not mounting. It is only mounting when I specify 200M size of shared_pool. Machine has 4cpu and 4gb of RAM.
I've configured the kernel and shemaphore parameter according to the oracle process.
Any thoughts or suggestions appreciated.

The whole SGA must fit into physical memory (SGA=shared_pool_size + (db_block_buffer*db_block_size) + log_buffer + java_pool_size).

My movies are giving a URL not found on server error message, last week they worked fine. After deleting one of them, I don't get any retries for a free download. How do I contact the seller to complain?

My movies are giving a URL not found on server error message, last week they worked fine. After deleting one of them, I don't get any retries for a free download. How do I contact the seller to complain? Obviously the one of the other movies first..

Stan -
Thanks again for the simple but valuable tip.
I'm just going to repeat the relevant sections from my previous post with the screenshots this time:
Below you'll see a snip of how my current folder structure appears. It's identical to yours, except there are no button files in the General Folder. Since you were kind enough to include a file name, I did a search on that specific one and it's nowhere to be found on my hard drive. Hmmm....
I've seen others remark on how... "challenging".... Adobe's instructions can be sometime. I'll admit to having the same feeling when I was trying to download and install all the content files and the 7-zip stuff. Is the answer somehow that I screwed up that? Note the 7-zip folder right above the Adobe folder. Here's a screen shot of that expanded folder contents:
Does that look like you think it should? Have I not installed or extracted something correctly?
Finally, the only other thing I can think of to give you as much info as you might need is to include a screenshot of where the "Functional Content" stuff got saved. Adobe's instructions about this (if I recall correctly) were that it did NOT have to be installed anywhere specific, but you then had to go into Encore (& Premiere) and through preferences point to this stuff, which I believe I did. But I don't see any button type files in these anyway.
Other thoughts or advice?
Thanks!

Why does ichat video not connect? The error message says we did not respond.

Why does ichat video not connect? The error message says we did not respond.

Hi,
iChat uses several port as they are called over the internet to do different things
Text Chats and Video Chats are on different Ports.
You probably don't have the port open.
Use UPnP in your router if it has it.
8:59 PM Sunday; August 12, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion =1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and

After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion>=1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and installed. Still no luck.
== This happened ==
Every time Firefox opened
== FF updated to 3.6.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

HT204053 In iCloud setup my apple I'd is not accepting. Getting error message it should be an email I'd, but my my apple Id is just in user I'd form? Please support.

In iCloud setup my apple I'd is not accepting. Getting error message it should be an email I'd, but my my apple Id is just in user I'd form? Please support.

I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish

My ipad receives email with the hotel wifi but will not send. The error message is "user name or password for ........is incorrect" but both are correct and unchanged. Restarting iPad didnt help.

My iPad receives email on the hotel wifi but will not send. The error message reads "user name or password for smpt......is incorrect" but both are correct and unchanged. Restarting iPad did not help.

I did try this too, but when I access my webmail on the iPad, the iPad doesn't allow me to type my message. I am able to enter in the "to" address and the "subject" line, but then the keyboard will not come up for me to type my message. Is there some trick to this? Very frustrating!

Not enough physical ports - error message??

Similar Messages

Maybe you are looking for