Not enough port fields in port forwarding for Linksys E4200

I have always used netgear routers in the past. After a series of issues regarding configurations not working correctly I invested in what appeared to be a semi pro router, the cisco linksys e4200.
I have a centralized server which I use to access a mass of different services such as mail, dns, VPN, FTP, Kerberos, http and many more. While I am not a massive networking nerd, this server setup is like my garage project. To access these services externally to my LAN as far as I understand I would need to configure port forwarding for each service to my server. Unfortunately the control panel for the linksys E4200 only offers about 15 custom port fields for forwarding, and some documentation I have read shows that with it's basic install my server could be using up to 60 ports at once.
Is this router just not suitable for this sort of network. If so I will be very disappointed because I have spent a quarter of the price on netgear routers with more control than this.
If anybody could assist with details and options I would greatly appreciate it

Wrong forum, use "small business routers".

Similar Messages

  • Does Cisco WAP4410N work as repeater for Linksys E4200 ?

    Does Cisco WAP4410N work as repeater for Linksys E4200 ?
    Hi,
    i have Linksys E4200 and I need repeater for it ...
    Can anybody help me with this issue ?
    BR

    Thx for answer
    I tested it and it works as Wireless Client - computer connected by ethernet wire is OK, everything works (DHCP etc)
    but when i turn on " Allow wireless station to associate" in WAP4410N settings of "Wireless Client/Repeater" it doesn't work at all
    I mean clients on wireless side and on wire side too ( DHCP doesnt work , there is no communication )

  • U3011t - Not enough power to USB ports

    We are working with a U3011t and before this past Friday all the ports on the monitor worked.  After doing re-imaging the computer, I am now receiving an error message that states there is not enough power to supply the USB ports.  Any Ideas why this is?

    The monitor USB hub is simply a receiver when the USB upstream cable is connected from the bottom of the monitor to a USB port on the computer.
    The monitor USB hub should appear in the Device Manager. When I connected the U3011 USB upstream cable to my Alienware M18x-R1 blue USB 3.0 port, the Device Manager- Universal Serial Bus controllers added =
    Renesas Electronics USB 2.0 Hub
    Renesas Electronics USB 2.0 Hub
    USB Mass Storage Device
    Reconnect the monitor USB upstream cable to the monitor port. Then, connect the other end of our monitor USB upstream cable to every computer USB port and re-test. Also, test the monitor on another computer. If available, test another USB upstream cable. The ones from any printer will work.

  • HT1766 Why can't I use my camera on my iPhone 5, nor am I able to update an app, with my iPhone claiming that there is not enough storage, even though I paid for mor storage, and my phone claims I still have plenty storage... I guess i bought a$500doorsto

    Why does my iPhone 5 keep saying "cannot download" "There is not enough storage to download 'Facebook'. (Btw, I already have fb on my iphone 5, just trying to update it). You can manage your storage in Settings... Well, in settings, I have plenty of storage left that I bought... called iCloud! What's up with this piece of $500 junk I bought from apple, that it won't allow me to record memorable moments in my life!!! Should I go back to android, which lets me record hours of video/audio/pictures, without ever "CHARGING ME EXTRA", never even a dime!!! What a waste of time, energy, resources, etc. I miss Steve Jobs... He wouldn't have screwed his customers over like this!

    Go to Settings>General>Usage and see how much available local storage you have available. You can also see what apps are taking up the most room.
    You say that you paid for more iCloud storage. That's for back ups. You can't download apps to it or steam media from it. In order to take pictures you have to have space on the phone itself.
    Best of luck.

  • TS4062 I am completely frazzled! My iPhone 4s says I'm over my GB's so now I can't even delete ANYTHING, not even my texts! also when I try to sync with Itunes it says there is not enough room in the itunes library for me to sync. What do I do now?

    I REALLY need help!!! My iPhone 4s is apparently OVER the amount of GB its supposed to have so it now will not even let me delete ANYTHING! Not my texts, apps- to free up space, NOTHING! It keeps kicking me off my email, wont let me get voicemail,see who last called on my "recents",  wont let me send or receive text's or even let me change things in my settings. Now when I go to iTunes to sync, so I can try to free up space, iTunes sais there isn't enough space in its library for all my stuff so it WON'T sync either!!! I'm frozen and I have A LOT of VERY important stuff on my phone that I REALLY need! Can anyone tekk me what to do? PLEASE!!!!

    First off try and go into your IPhone manually through My Computer and cut photos or anything you can through the device to be able to free space up so that you can continue to do what you want to do with ITunes. This way you will be able to create a backup or do what you have to do to manage your information, photos and texts on your device a little better.

  • Not enough memory on adobe acrobat 9 for web page capture

    I use adobe acrobat 9 pro for creating a pdf with web page capture function.
    After a while (about more of 500 pages) the free ram became insufisant and the program stop.
    I am running on windows 7 with 4 Go ram.
    When i take a look on memory utilisation i see that adobe use more of 1.7 Go ram .
    During capture the ram is always increasing , i didnt see disk saving .
    Who has a idea ?

    The .rpt file size is 14MB with the Data Save option enabled, 12MB without Data Save.  Presumably the 12MB file size is because of the 24bit PNG we have as our background.
    The Designer executes the report in less than a second and we can scroll through all pages and see the image fields perfectly.
    When we Export to PDF, the Designer takes a long time, eventually gets to the 77%, the 7th record and returns "Export report failed" followed by "Memory full".  If we export only page 1 of the 3 pages, it also returns a Memory full error.  However, when the same report is run with only 1 page, that page exports to PDF but with a ridiculously large size and export time.
    The machine has 2GB of physical memory with an 8GB pagefile with Windows 2003 (latest everything).  The process runs up to about 1GB before reporting the memory full error.
    We've also tried a variety of other suggestions posted in the other thread with no success.
    We're happy to provide the RPT file to the Report Team to diagnose the problem.  Ultimately, we need to be able to produce a 15 page report with approximately 45 images.
    Our preferred scenario is fixing problem 2.  The CR Designer seems quite capable of rendering our report and printing it to our third party PDF printer in a timely manner with small size.  However, the API reports memory full.
    The API resides in a dedicated reporting web service with NO other code except for loading the report, setting parameters and printing.  When executing, it uses up to about 1.1GB before reporting the error.
    Are there any other suggestions for fixing what we have?  Are there known problems with large images in reports?  Do we need to lodge a formal support request?
    Regards,  Grant.
    PS.  Grr and my message formatting is lost when I edited this message!!!
    There is a 1500 character limit and then all formatting is removed to save space. Break you posts into separate entries.
    Edited by: grantph on Sep 30, 2009 2:49 AM

  • I rented a movie on my phone i put my card number in and everything but the movie said it could not download because there was no space i deleted all my apps it still was not enough. Will i be charged for the movie

    Will i be charged

    Then launch in iTunes and go to Store>View My Account. Enter your password. Go down to Purchase History and click on See All on the right side. Find the movie in the list and click the arrow to the left. Then in the next window - click on Report a Problem.

  • When I plug in external hard drive to airport express it tells me not enough power for the usb port. I have the airport express plugged in to power

    Airport express tells me not enough power to usb port for hard drive.
    I do have power to Airport express plugged in.

    The AirPort Express will not support a hard drive....only a printer.
    If you need to connect a hard drive, you need an AirPort Extreme, not an AirPort Express.

  • Linksys e4200 port forwarding

    I need some help with port forwarding for Minecraft application (port 25565).
    I use modem and router to connect to the internet.
    When I connect my PC directly to modem port forwarding is working.
    When I connect my PC through my router  the port is closed. I followed instruction for port forwarding.
    I disabled Windows firewall, antivirus etc.
    Any idea how to open those ports for linksys e4200 please?
    Thank you in advance for your time and help,
    koze
    Solved!
    Go to Solution.

    Thanx all for your reply and help.
    Here is what I've done:
    1. I disabled DMZ mode on my Linksys e4200.
    2. I changed my DMZ host on my modem to my Router internal IP.
    3. I tuned on Remote Access on my Router:
    Question:
    Shoud I put my router or modem in brigde mode?
    I use pppoe:
    Thanks in advance
    koze

  • When i sync my iphone it says that there is not enough room in my itunes library what do I do?

    When I try to sync my iPhone with iTunes, it says that there is not enough room in my itunes library for my phone to sync. Why is this? Do I need to delete stuff off my library? Or is my laptop too full? Or is it that my phone hasn't got enough space? ...Or something else?

    Why is this so difficult to figure out?
    The message is quite clear.  The size of the iTunes library is larger than the space available on the device.
    Stop attempting to sync the entire library to the device.
    Select the desired content to sync to the device.
    Sync.

  • 2147189176 :Logon failed. Details:Could not open the field definition file

    Dear All..
    I get error message when i want to export my report to PDF, like this :
    2147189176 :Logon failed. Details:Could not open the field definition file.
    For information, i'm using database Oracle 10g, Crystal Report XI release 2, and Classic ASP as programming language.
    Can you help me for resolve this problem?
    Thanks for all.
    Regards,
    Yuni

    Let's throw SP 6 for CR XI R2 at this first:
    https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
    Next. The error indicates that the report is created off of TTX files. If the SP above does to help, please specify the type of connection used in the report. Also, the OS and is it 32 or 64 bit OS?
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • Not enough disk space error - but not rea

    I have a Nomad Jukebox 3 - no really. It runs like a champ!? I use it most often for recording 44KHz audio. I just did the auto-update thing for the mediasource and plugins, blah blah blah. Now I can't sync a large recording (about .4GB)?to my computer. It gives me this error:?There is not enough disk space at the destination for this transfer. this is obviously a bug because it was working before the update. Please HELP!!

    I have the same problem - a Jukebox 3 which usually refuses to transfer files over about a gig.
    My old system disk was 30Gb, and it always worked OK with that, but when I reinstalled everything on a 20Gb disk, I got problems. I slightly suspect it may get confused when it checks for disk space by a disk that's a lot bigger than was available back when the Jukebox 3 came out. If anyone knows how to fix this I'd be most grateful - last time I had to record the audio in through my soundcard!

  • Problem "There is not enough disk space ..." when transferring tracks back to compu

    Hi All,?I am recovering from a massi've hard dri've failure so no lectures about backups for my library please. I am trying to transfer all of my mp3's back from my Zen Xtra 30GB to my computer. I am using Creative MediaSource and it worked for about 800 of them but now has stopped. Now any track will report an error "There is not enough disk space at the destination for this transfer". Checking my disk, I have 6GB of space left, so I am left in the dark as to how to fix this. I can't even get an individual track. Trying to troubleshoot this on my own, I've deleted my temp files but still no luck. Has anyone here has this problem? Better yet, does anyone have a solution?Thanks all!

    and now it doesn't. 8GB free and a few more tracks to go.

  • I have the new Air Port Extreeme model A1521 and I need to set up port forwarding for HTTP. HTTP is not on the list in the set up. Does anyone know if any of those choices work for HTTP?

    I am on a Windows 7 Ultimate PC and right now there is no Airport utility for setting up the new Apple Extreme so you have to do it on your iPad or iPhone. Does anyone know how to set up port forwarding for HTTP to get to DVR security cameras? There is nothing in the list that indicates HTTP port forwarding.

    Thanks for your reply Tesserax as I did figure this out on my own. It took a bit because all of the options are not clear what they are for like the previous Airport Extreme and Apple does not support or guarantee that port forwarding will work for you application nor did any of the Apple support persons I spoke too have any knowledge for this feature. You also have to fill in the public if you are viewing through someone else's Wi-Fi or on your cell phone carrier network. This new Airport Extreme is a bit different since you cannot use the Airport utility on a PC like the older model and if anyone else is reading this they should be aware that if you do not have an Apple computer, iPhone or iPad and I'm not sure if some of the other network enabled devices like iPod Touch that you must use that can do it, there is no Airport utility for the PC and you would be wasting your money or have to take it back and get another brand wireless router to use if you do not own any of the above mentioned Apple products.

  • Not enough USB Ports for charging ipod ?

    not enough USB Ports for charging ipod ?

    If all your ports are in use, try buying a USB hub, they are inexpensive and will give you several more ports.  Google for them.

Maybe you are looking for