Not enough space on disk error when I have enough space on disk

I'm trying to export a video to my external hard drive, which has plent of space. About halfway through the export, Premiere gives me a "not enough space on disk" error. My startup drive is getting pretty full, but still has a bit of memory and I'm not sure why I would need space there if the render is going the external.
Thanks for any help!

Macs can read NTFS volumes.
Maybe, but they can't write to them out of the box. And since external drives generally come empty, it's a pretty safe bet that the purchaser will want to write files to it. So, a lot of drive makers format as FAT32.
exFAT is a better file system than FAT32, especially for solid state media like P2 and SD cards. Using exFAT on those cards would allow large files (long continuous shots) and keep compatibility with Macs. Now, if only camera makers would issue firmware updates to allows exFAT formatted media...

Similar Messages

I get a disk error when trying to upgrade to mountain lion on my mac book pro that also runs bootcamp

I recently tried to upgrade my macbook pro OSX to mountain lion via the app store. When it tried to install it gives me a disk error. I have run disk utilities and repaired, verified etc. but it makes no difference. I am running bootcamp as well and have tried to modifiy the partition sizes in disk utilities, but it says for both that they cannot be modified. I can switch my startup disk and reboot in windows, no problem, so getting my files off isnt the issue. I have also tried to recover the hard disk using time machine which i was lucky enough to backup the day before it all went wrong. However, time machine runs fine until it asks me which disk to recover and it gives me an option of the time machine disk or bootcamp, but no option for my mac partition. So, I have tried everything that makes snese, but getting errors with disks lock, cant repartition, disk error needs repair (which i know is not true, its only because of the Mountain Lion OSX that its messed up). Any ideas?

You have some other problem with your boot drive that has corrupted data backed up to the TimeMacine drive.
My advice is to boot into each operating system and manually backup just your Users files each to separate regular external drives (no Timemachine or backup software) and disconnect.
Make a note of any serial numbers, emails, address book contacts, export bookmarks etc. that isn't typically in your users folders data.
You might be able to Winclone 3 the Windows as a whole thing as it's appearing not to have issues but it's your MacintoshHD partition that is so that will have to be rebuilt from scratch.
Most commonly used backup methods
If your OS X parititon doesn't boot, you can use this to recover files.
Create a data recovery/undelete external boot drive
Without any further detail about your machine I can't advise specifically what to do, but it involves using Disk Utility to Zero Erase (move slider one spot to the right or in 10.6 using Security Option) the ENTIRE boot drive and reformatting, then installing OSX fresh and then setting up BootCamp again.
If you wish to switch your boot drive for something better, this is a good time to do this.
Install/upgrade RAM or storage drive in Mac's
If your machine is capable of Internet Recovery, then use that, then upgrade.
If your machine came with 10.6 or earlier, then use the 10.6 install disks and work up from there.
Erase, formatting, OS X installs on Mac's

Hp pavilion dv6 6180 help me for this error when I am using my recovery disk

hp pavilion dv6 6180 help me for this error when I am using my recovery disk
The destination drive is not connected

Hello Mohammadshamlou. I understand that you're having some issues using your Recovery Disc. It is giving you the error that the drive is not connected. Is this correct? How long have you had the notebook?
What issue originally led you to want to try a recovery?
The error seems to imply that it is not detecting the hard drive as this would be the most logical destination drive. So, I feel the best thing to try first is verify that the hard drive is in proper working order. Follow these steps and please post the result.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Slow Disk error when using Finale Cut

I get a slow disk error when trying to play something in finale cut but when i try to verify disk and repair disk i get Error: Could not unmount disk. What is going on and how do i fix it?

You have to boot from a DVD or external OS to fix the Disk. You can't unmount a disk that is currently hosting your operating system.
http://support.apple.com/kb/ts1417

[svn:bz-trunk] 21394: bug fix for watson 2887837 Not getting duplicate session detected error when same flex client id is used from two different HTTP sessions in CRX .

Revision: 21394
Revision: 21394
Author:   [email protected]
Date:     2011-06-16 12:34:13 -0700 (Thu, 16 Jun 2011)
Log Message:
bug fix for watson 2887837 Not getting duplicate session detected error when same flex client id is used from two different HTTP sessions in CRX.
get the sessions id before we invalidate the duplicate session.
Checkintests pass
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseHTTPEndpoint.java

For our profect I think this issue was caused as follows:
Believing that remoting was full asynchronous we fired a 2 or 3 remote calls to the server at the same time ( within the same function ) - usually when the users goes to a new section of the app.
This seemed to trigger the duplicate http session error since according to http://blogs.adobe.com/lin/2011/05/duplication-session-error.html two remote calls arriving before a session is created will cause 2 sessions to be created.
Our current solution ( too early to say it works ) is to daisy chain the multiple calls together .
Also there seemed to be an issue where mobile apps that never quit ( thanks Apple! ) caused the error when activated after a few hours.
I guess the session expires on the server and the error above occurs on activation.
So the mobile apps now ping the server with a remote call when activated after sleeping for more than one hour.
All duplicate http errors are silently caught and reported.
Fingers crossed we won't get any more!

I have pre 08 iphotos saved on disk. When I try and open the disk in I photo on macbook pro I get the following message Unreadable file, The following file could not be imported.(The file is in an unrecognized format)

I have pre 08 iphotos saved on disk. When I try and open the disk in I photo on macbook pro I get the following message Unreadable file, The following file could not be imported.(The file is in an unrecognized format)

Here's a test you can run:
1 - copy a set of photos from the disk to a folder on the desktop.
2 - download and unzip the Automator workflow Convert to JPG and Embed sRGB profile. You can download it from Toad's Cellar.
3 - select the files in the folder and drag and drop onto the workflow app.
4 - try to import the resulting files.
OT

Windows installer package not running or installing properly error when i try to install and update to the new icloud control panel.

i get a windows installer package not running or installing properly error when i try to install and update to the new icloud control panel.

Okay ... so it's not one of the cases of bodged up ACLs on the Apple folder in Common Files. (That's been underlying a few of the recalcitrant E7W5s.
Just in case, let's try the fixit from the following document:
Fix problems with programs that can't be installed or uninstalled

Disk error when installing

i downloaded os x mavericks cant install, i get disk error that i have go to disk utility and fix error, i have done this and now it says errors cant be fixed.cant use pc at all until i can fix it

Then, you need something stronger, such as DiskWarrior or Drive Genius. Post the exact error message and we should be able to point you in the right direction.

Why does it say that the updated version of Firefox (which I am trying to download) is not compatible with my operating system when I have Mac OS X 10.5.8?

Why does it say that the updated version of Firefox (which I am trying to download) is not compatible with my operating system when I have Mac OS X 10.5.8? I had an older version of Firefox and it said I needed to update it but that was the message that appeared.

Sorry, it's because Firefox 4+ are only compiled for the Intel processors.
There is a separate project for PPC Macs called Ten Four Fox. You might give it a spin when you're tired of 3.6.
http://www.floodgap.com/software/tenfourfox/

Why can i not convert a form to PDF when I have an active account and it wants me to sign up for an upgrade?

Why can i not convert a form to PDF when I have an active account and it wants me to sign up for an upgrade? This just started!!!!!!!!

Hi EdAAK,
I've checked your account, and see no issues with your subscription. So, if you're using a web browser, please log out, clear the browser cache, and then log back in to https://cloud.acrobat.com. And, if you're using Reader, make sure that you're logged in—you should see your name listed in the upper-right corner. If not, click the Sign In link and then sign in with your user name and password.
Please let us know how it goes.
Best,
Sara

I cant buy icloud storage as there is an error bt i have enough credit in my itunes account

I cant buy icloud storage as there is an error but i have enough credit in my itunes account

i have enough credit
If you are referring to the balance from a redeemed iTunes gift card or certificate, that won't work.
iCloud storage can only be purchased from a debit or credit card account.
Read here > iCloud: Manage or buy more iCloud storage

What do i do if something is blocking any disk from going in to my disk drive when i have no cd/dvd's in my macbook pro?

what do i do if something is blocking any disk from going in to my disk drive when i have no cd/dvd's in my macbook pro?

Bring it to an Apple store or AASP and have them check out the optical drive.

Replace the hard disk has, and also have lost the OS disk.

Replace the hard disk has, and also have lost the OS disk.
Reset on my computer to install the program instantly,
Is there any way?
Thank you.

If I follow you correctly, you either have or will be replacing the hard drive in your iMac. You don't have the original OS X disks nor an operating system disk. Do you have a bootable backup? Here are some steps/options:
1) If you have a bootable backup, install the hard drive, boot from the external hard drive, then use SuperDuper or CCC to copy the external hard drive to your new internal hard drive.
2) You have your old hard drive, and it's not dead. Put it into an external case and see above.
3) You don't have either a bootable backup or a working old hard drive. You can try calling Apple Support to see if they still have the original OS X disks for your system. If they do, they'll charge a nominal price for them.
4) You checked and Apple no longer has disks for your system. You can go to the used market to buy Leopard 10.5 disks. If you do, be sure and get retail black-faced disks, but don't get the black-faced disk which is an upgrade disk .... if you don't have 10.4 on your system, it won't work. Careful of gray-faced OS X disks as they are locked to the original system type they ship with. So a gray faced OS X 10.5 disk for a MacBook won't work on your iMac.
5) Another related option is to buy 10.6 Snow Leopard, if your system meets requirements. This is still sold by Apple, and in the US is available online for $29.99 from the Apple store. Snow Leopard requirements are:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
6) Or you could consider Lion, via the USB stick that is sold in Apple stores. Lion requirements are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory (4GB recommended)
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Hopefully I haven't totally misunderstood your question, and answered something you weren't asking!

My external hard drive accidentally switched off during Disk Utility's "erase free space" process. I restarted the external hard drive and Disk Utility, but now I get the "couldn't mount disk" error when trying to finish the erase. Please help!

My external Lacie Quadra hard drive accidentally switched off in the middle of "erase free space", and when I switched it back on Disk Utility was hanging. So I Force Quit Disk Utility and restarted it. Now when I try to erase I get
"Secure Disk Erase failed with the error: Couldn’t unmount disk."
But "erase free space" seems to work...
What can I do? I'm erasing as I'm giving the drive to someone else and I wanted to wipe it clean.
Also should I use "erase" or "erase free space" if I want to wipe the drive clean?
Please help!

Sorry I don't really understand.... there are no partitions on the drive. How do I repartition it?
And should I use "erasing free space" or "erase" for wiping clean my drive of everything? Erase seems to be faster last tiem I tried.
Thanks!

Why do i get the "the disk you inserted was not readable by this computer" error when I don't even have a disk inserted?

Why do I keep getting "the disk you inserted was not readable by this computer" caution message when I don't have a disk inserted???

Unfortunately, I saw this error for the first time this morning. It's on my wife's iMac running Lion, and it appeared when the machine locked up on a Software Update screen prompting her to run an update (I'm assuming this was the recent Security Update).
After numerous failed attempts to force-quit or otherwise safely restart, she hit the power button, and when the machine came back up it failed to recognize the startup disk. I've since successfully restarted from several different (external) startup disks without incident, but each time I attempt to fix the internal drive via Disk Utility the disk shows only as "Media" and all the usual options to Repair or Verify the Disk are greyed out, leaving only the Erase Disk option.
Are we totally hosed?

Not enough space on disk error when I have enough space on disk

Similar Messages

Maybe you are looking for