"not enough space on out put media"

i have been using dvd studio pro and it worked flawlessly until now. i have been getting "not enough space on out put media" on the log. im using a 15" mbp and a recently acquired 20" imac. can anyone help me out?
thanks

It sounds as though you are trying to put too much video onto your DVDs.
If this is the case you will have to lower the bitrate at which it is encoded.

Similar Messages

Not enough space on PC for media backup for ios 5.0 upgrade. Can it be config to use external 1T drive, rather than C: drive?

We have iPhone 4 and 3GS, iTouch and Nano.
The PC has about 3GB on the C: drive available, and I have an external USB connected 1T drive which is just about empty.
Can backup / sync functions be changed to use the external drive?
i-device backups and media files have taken over much of my C: drive space.
The iTouch upgrade to ios 5 is stopped because the media would be lost due to insufficient C: drive space. (Requires 3.5GB)

Move all of your media files to the external hard drive, then delete the information on your C: drive. Take a look at this link for instructions. http://support.apple.com/kb/HT1364

Not Enough Space on Output Media Issue

Hi guys, we are having a problem with a DVD we put together in FCP, compressed via compressor and are trying to burn in DVDSP. The program is under 2 hours and the 120minute mpeg2 setting was used. The audio was converted to ac3 as well. The file sizes for the two files are 2.88gigs and 990megs respectively. When brought into DVDSP4, the space meter(which we all know is horrible accurate) reads properly as around 3.6 gigs. But when trying to burn to a DVD-5 disc it says there is not enough space on the output media.
Any ideas why this is happening? Thanks!

not sure why DVDSP would give you this trouble. You might need to import to a new project to reset the disc meter. Try just doign the build and see if the size of the video_ts folder is correct.
If not, check to make sure you are not burning to a CD instead of a DVD, stranger things have happened.

Not enough space on DVD?

i'm trying to burn a few DVD's of a few .mov files, but whenever it goes to burn it says there's not enough space on the output media. it's under 2 hours so that shouldn't be a problem, and i've burned stuff to the same type of disc that were larger than all these movies, so why would it not let me burn it?
powermac g5 Mac OS X (10.4.3)

to be honest, i've no clue. i just started using DVDSP and every time i've just put the videos i wanted on the tracks and set up my menus and all worked fine. so how do i go about checking/fixing that?

Trying to build a DVD image, DVDSP4 says not enough space

I have many years' experience using DVD Studio Pro 4, so this hopefully is not a stupid question.
I'm using an iMac with 80gb free and an external HDD with 12gb free. I have authored a DVD in DVD Studio Pro 4. The project says it's 4.6gb.
I need to make a disc image file of the DVD so I can burn it to DVD media using another computer. When I do this, it encodes for hours and then says "Formating Failed. Not enough space of the output media" (I might be paraphrasing.)
The only possiblt output medias, the iMac and the external drive, both have plenty of space, and the project is under the limit. So what gives?

Let me try this again, because I think we're not communicating.
I have authored a DVD Studio 4 project with menus and assets, etc. It simulates just fine. The tab on the top of the DVDSP screen indicates my project is 4.6gb. This means I should have no problem turning this project into a DVD. The computer I'm working on has no DVD burning capabilities so I want to create a disc image of the project instead of burning a DVD. I have done this before, where DVDSP encodes and builds a file that I can then use Disk Utility to burn to a DVD. So, once I have my disk image, I will transfer that file to another computer, and use Disk Utility on that second computer to burn the DVD from the disk image.
NOW
The problem I'm having is that DVDSP is not able to make the disk image. When I go to "Build/Format", it should make a disk image, but instead, I get an error saying there is not enough space on the output device. The "output device" in this case is my external Hard drive which has plenty of space. That is why I am asking for help.

Volume erase failed: Media kit reports not enough space on device

I was having problems with the external drive where I store my Time Machine backups, so I tried plugging and unplugging the drive (per earlier advice, and something that had worked in the past), but could not mount the drive. I ran Disk Utility and tried to verify the disk, which told me the disk needed to be repaired. I tried to repair the disk only to get an error message that Disk Utility could not repair the disk and it needed to be reformatted. So I tried to erase the disk with Disk Utility only to get the error message "Volume erase failed: Media kit reports not enough space on this device for requested operation". I am not sure what else to try at this point and could not find any similar questions here.
The drive in question is a 3TB USB Seagate Backup + Desk Media, formatted as Mac OS Extended (Journaled). It's divided into two partitions, one of which (2.2 TB) holds only Time Machine backups of my desktop and laptop and the other of which (800GB) is formatted similarly with some files stored on it. I was able to verify and repair this other partition. I'm running Disk Utility 13 on an iMac (2.8 GHz Intel Core 2 Duo) running OSX 10.8.5
Any suggestions for what to try next would be appreciated.

Just to let you know I appear to have the *exact* same problem, even down to the 3TB hard-drive in question.
I read recently that a time machine backup should have its own physical hard disk, not a separate partition on an otherwise-used disk. I wish I'd known that in advance of buying the external drive, as I would not have invested in a 3TB one if I had known I could only use it for Time Machine alone.
Dianeoforegon does make a fair point, though, in saying that all backups in one place is asking for problems down the line.
Incidentally, this Time Machine problem first started occurring when I upgraded to Mavericks. 9 times out of 10 my Time Machine partition would go corrupt for no reason. This definitely hadn't been happening at all before Mavericks. That same upgrade also killed off my entire Boot Camp partition, which caused me major headaches and I eventually had to simply reformat that partition and start again.

Blu-ray Dual layer code 25 "not enough space on media"

Using Encore CS6 (Cloud edition) to build Blu ray Dual Layer on Mac. Project is 34.75 GB. While building Blu-ray Image all is well until Data written 34.75 GB of 34.75 GB. Then the dreaded "Blu-ray Error: "not enough free stoarage", Code: "25", Note: "Note enough space on media" comes up and the buld is stopped. I repeated by building a new project with the same results. There is over 100 GB of free space on the hard drive. I paritially rebuilt the project at 22.5 GB and tried it as a single layer image. Everything worked fine for that Blu-ray image, so it appears this could have something to do with the Dual layer nature of the larger project. Any help and guidance would be much appreciated.

I would point out three points. You can try them in order:
You can apply the 6.0.2 patch that is available (if you have not done so) because the patch has a fix around this issue.
There is a lot of space requirements for the dual layer BD project. Here is the list of almost all the things that would need space:
First the asset's indexed files would need space. For audio files, there might be conforming happening that again would need space.
Then when yoy build the project, the assets will be transcoded (if already not or they are not Don't Transcode). This would take a considerable amount of space as the transcoded assets are complete footage which would be huge.
Then while creating a image file, First all the files (muxed video streams) would be copied on the disc in a folder (generally named BDMV) and then at the final step, they would be copied from the BDMV folder to the iso file and finally the BDMV folder would get deleted. So this step would need almost double the size of your project. IF your project is say 35 GB, then this step alone would take more than 70GB.
So the space requirement for a 35 GB (Disc Info) project might go to almost 100 GB.
But again there is some bug in size estimation for Motion menus and slideshows. Encore says that they will occupy lesser space but actually they are going to occupy more space. So if your project has motion menus or slideshow, then the estimation might be incorrect. So if it showing 35 GB (for example) and your project has motion menu or slideshow, then actually it might be 37GB or more or anything greater than 35GB depending on the slideshow and motion menu duration in the project.
-Ramesh.

Not enough space on output media

I am trying to burn a DVD-R disc. I have 110 minutes of video at a bit rate of 4.5, max 7.0. The video was encoded from Final Cut Pro to mpeg-2 and the audio as aif. I have gone through the formulas in the help guide but I keep getting an error message that there is not enough space on output media.
Does anyone have any suggestions?
thanks in advance,
Cece

As Kelly points out, uncompressed aiff audio takes up an enormous amount of space.
Encode in a.pack to two channel stereo, 192 kbps, -31, no film compression.
Also having a maximum bit rate that high for nearly two hours of video is iffy,
You might want to drop it back

I am trying to update my apps on my 4s but says there is not enough space. It shows i have 19.3 GB of 25 GB. Also, in my itunes...it shows about a quarter of space on the bar is photos but I took all the photos out. Don't make sense.

I am trying to update my apps on my 4s but says there is not enough space. It shows i have 19.3 GB of 25 GB. Also, in my itunes...it shows about a quarter of space on the bar is photos but I took all the photos out. Don't make sense.

It's telling you there's not enough space *on your 4S*. The 25GB you refer to is probably that on iCloud, that's different memory than that on your iPhone. You need to delete video, pictures, apps, or whatever ON THE IPHONE, to make enough room for downloading updates to your apps.

ORA-27102: out of memory SVR4 Error: 12: Not enough space

We got image copy of one of production server that runs on Solaris 9 and our SA guys restored and handed over to us (DBAs). There is only one database running on source server. I have to up the database on the new server. while startup the database I'm getting following error.
====================================================================
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Aug 6 16:36:14 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-27102: out of memory
SVR4 Error: 12: Not enough space
SQL>
====================================================================
ABOUT THE SERVER AND DATABASE
Server:
uname -a
SunOS ush** 5.9 Generic_Virtual sun4u sparc SUNW,T5240*
Database: Oracle 10.2.0.1.0
I'm giving the "top" command output below:
Before attempt to start the database:
load averages: 2.85, 9.39, 5.50 16:35:46
31 processes: 30 sleeping, 1 on cpu
CPU states: 98.9% idle, 0.7% user, 0.4% kernel, 0.0% iowait, 0.0% swap
Memory: 52G real, 239G free, 49M swap in use, 16G swap free
the moment I run the "startup" command
load averages: 1.54, 7.88, 5.20 16:36:44
33 processes: 31 sleeping, 2 on cpu
CPU states: 98.8% idle, 0.0% user, 1.2% kernel, 0.0% iowait, 0.0% swap
Memory: 52G real, 224G free, 15G swap in use, 771M swap free
and I compared the Semaphores and Kernel Parameters in /etc/system . Both are Identical.
and ulimit -a gives as below..
root@ush**> ulimit -a*
time(seconds) unlimited
file(blocks) unlimited
data(kbytes) unlimited
stack(kbytes) 8192
coredump(blocks) unlimited
nofiles(descriptors) 256
memory(kbytes) unlimited
root@ush**>*
and ipcs shows nothing as below:
root@ush**> ipcs*
IPC status from <running system> as of Fri Aug 6 19:45:06 PDT 2010
T ID KEY MODE OWNER GROUP
Message Queues:
Shared Memory:
Semaphores:
Finally Alert Log gives nothing, but "instance starting"...
Please let us know where else I should check for route cause ... Thank You.

and I compared the Semaphores and Kernel Parameters in /etc/system . Both are Identical.are identical initSID,ora or spfile being used to start the DB.
Clues indicate Oracle is requesting more shared memory than OS can provide.
Do any additional clues exist within alert_SID.log file?

Error for 'not enough space' when downloading a video. I can see that it's music but I'm deleting songs out of my itunes and it's not helping with the space.

I'm trying to download vide'os to my iPad but I'm getting an error that there is 'not enough space'. When I look at my space, it's mostly music. I've deleted out albums from my itunes but it has not freed up any space. How do I delete these albums?

Music takes up very little space, movies use a lot of space.
Settings, music
Setting, usage
Both these area will give you info but if the movies are bigger then these areas allow, you may not have enough room even with removing all the music.
How big are these movies and how many?

Blu-ray Error: "not enough fre storage". Code:"25", Note "Not enough space on media"

I have a project a Encore CS6 V6.0.1.013 for MAC.
I tryng export do Blu-ray Disc, but ireceved this error message
Blu-ray Error: "not enough fre storage". Code:"25", Note "Not enough space on media"
But at "Disc Info" i have 14.71mb free

My longer notes on this error:
The most common workaround for this is to build to a folder and burn with ImgBurn (for PC) or toast (for Mac).
Searches show that there has not been success in many situations. I do not believe that it is one problem.
I have generally believed that the error refers to temporary storage on the hard drive. And users underestimate the amount of temporary hard disk drive space used. For bluray it is about twice the disk or more.
Some users experience this error when they are creating dual layer BD disks, and a layer is more than 25G. Each video/layer must fit on one side.
And some users successfully burn their disk by re-encoding to a lower bitrate (a 25G BD disk does not hold 25G). Encore uses padding to predict the size on disk (e.g. add 10% to the amount of space it predicts that build will use), and it can be wrong.
Always good to "run as administrator, though I don't know that ever fixed this issue if someone wasn't.
For CS4 there was a required update for a Roxio component. I believed this was a temporary problem due to the combination of Win7 and Encore CS4, but users on newer OS and Encore have reported resolution of problems after installing the patch.

DPM is out of disk space for the replica. (ID 58 Details: There is not enough space on the disk (0x80070070))

I constantly get these message on laptop backup, what actually does it mean?
DPM is out of disk space for the replica. (ID 58 Details: There is not enough space on the disk (0x80070070))
I set automatic growth on protection group and there is plenty space.

Auto-grow Key Points
1.) Auto-grow needs to be enabled for the datasource.
2.) We grow the replica/recovery point volume by 10gigs or by 25% whichever is higher.
3.) To prevent race conditions, we do not grow within 15 minutes of the last growth.
http://social.technet.microsoft.com/Forums/ru-RU/6c70079e-6d90-42e2-89c4-9ddc7fcf11f4/dpm-2012-is-out-of-disk-space-auto-growth-does-not-work
https://blogs.technet.com/b/dpm/archive/2011/06/06/how-to-use-and-troubleshoot-the-auto-heal-features-in-dpm-2010.aspx
http://robertanddpm.blogspot.ru/2010/09/shrink-volumes-auto-grow.html
Have a nice day !!!

When I download an app I had to put in payment settings cause it was expiring,after that it was downloading but then said 'cannot download because your ipad does not enough space' but I actually have 3.3 gb while the game is 1.4 .pls tell what to do

When I download an app I had to put in payment settings cause it was expiring,after that i paid and it was downloading but then said 'cannot download because your ipad does not enough space' but I actually have 3.3 gb while the game is 1.4 . I tried rebooting and powering off but still it didnt work even when I clicked the app( which still hasn't downloaded yet). What do I do now?

The GB size of the download file is the compressed size (like .zip or .dmg). When the file is installed/uncompressed it can be 2-3 times larger.
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
 Cheers, Tom

TS3992 My IPad states I have 4.1 GB available out of 5, but my IPad will not backup, says there is not enough space. What should I so.

My IPad states I have 4.1 GB available out of 5, but my IPad will not backup, says there is not enough space. What should I do?

You are looking at the amount of storage that you have available on the actual iPad (Settings > General > About > Available) and not the amount that you have in the cloud (Settings > iCloud) ?

"not enough space on out put media"

Similar Messages

Maybe you are looking for