Not enough space on PC for media backup for ios 5.0 upgrade. Can it be config to use external 1T drive, rather than C: drive?

We have iPhone 4 and 3GS, iTouch and Nano.
The PC has about 3GB on the C: drive available, and I have an external USB connected 1T drive which is just about empty.
Can backup / sync functions be changed to use the external drive?
i-device backups and media files have taken over much of my C: drive space.
The iTouch upgrade to ios 5 is stopped because the media would be lost due to insufficient C: drive space.  (Requires 3.5GB)

Move all of your media files to the external hard drive, then delete the information on your C: drive.  Take a look at this link for instructions.  http://support.apple.com/kb/HT1364

Similar Messages

  • "not enough space on out put media"

    i have been using dvd studio pro and it worked flawlessly until now. i have been getting "not enough space on out put media" on the log. im using a 15" mbp and a recently acquired 20" imac. can anyone help me out?
    thanks

    It sounds as though you are trying to put too much video onto your DVDs.
    If this is the case you will have to lower the bitrate at which it is encoded.

  • Getting an error message, not enough space, when doing a file backup in HP Recovery Manager

    Hi
    I have a Pavillion dv7-6b32us using Windows 7 64 bit
    Laptop will not boot. (A seperate issue that I have posted on the Laptop Freezes board) and Im trying to backup my drive through HP Recovery Manager. I get a message that there is not enough space available. Is there anyay to backup my drive to save the info?
    This question was solved.
    View Solution.

    Hi,
    Choose yes.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • TS3683 Not enough space on my Mac HD to back up my iPad.   My iTunes library is on an external drive.  Can I use this same drive to Back yup my iPad?

    I don't have enough space on my Mac HD to back up my iPad.   Actually, my iTunes library is on an external drive.  Can I use this same drive to Back up my iPad?

    1. First make sure iPhoto is not running. If it is, quit it. Use the Finder to copy your iPhoto Library file to your external drive. Unless you've changed it, its located inside your Pictures folder and is named "iPhoto Library".
    2. After the copy is complete, start iPhoto while simultaneously holding down the option key. iPhoto will bring up a dialog box. The file in the list is your existing Library on your internal disk. Click the "Other Library" button and navigate to your external drive. Select your freshly copied iPhoto Library file and click "Open". iPhoto will from now on open and work with this library on the external drive.
    3. After you've confirmed iPhoto is working properly with the newly copied library you may wish to delete the original library in your Pictures folder to recover the disk space.
    Don't forget to keep a backup copy of your library on a separate disk. It's not a matter of "if" your external drive will fail but "when". You need to make regular backups or you'll be sorry someday.

  • Lightroom pulls up photoshop from backup drive rather than boot drive

    I am using the latest versions of Lightroom and Photoshop for Mac.
    I back up each night using super duper.  In Lightroom, when I choose to Edit in Photoshop CC 2014, Lightroom loads Photoshop from my backup drive.  The only workaround I have found is to dismount my backup drive.  Is there a place I can go in either lightroom or photoshop to specify from which drive Photoshop should start when Editing from Lightroom.  If I start photoshop first, then Lightroom "finds" the correct Photoshop, but I'd like to actually solve this rather than using a workaround.  BTW, I used Adobe's instructions for uninstalling Lightroom and then re-installed, but that did not solve the problem.

    ANSWER BELOW:
    I discovered a work around - super duper has a way to create custom scripts which will NOT back up items you specify.  I went to the backup drive of my main drive and deleted both photoshop CC and lightroom cc.  After running super duper using the custom script (which they explain thoroughly in the latest super duper manual) and NOT backing up either Photoshop or Lightroom (in Applications) things are back to normal.  If I need to reinstall either photoshop or lightroom, I can easily do that from the web.

  • Not Enough Space for Restore?

    Hello
    I wish to help me iPhone 5 64G stolen
    now I bought the iPhone5C 16G
    If i restore from last backup
    Not Enough Space on iPhone to Restore Backup!!!
    sms and contcts  and photos only i needd
    I do not care apps anthor thing ..
    so what is the solution

    You'll need to extract your contacts/photos from your backup, using something like this:
    http://www.iphonebackupextractor.com/
    You can then sync that stuff to your phone. For SMS's, while you can extract them from your backup, there's no way to get them on your phone.

  • Not Enough Space on Output Media Issue

    Hi guys, we are having a problem with a DVD we put together in FCP, compressed via compressor and are trying to burn in DVDSP. The program is under 2 hours and the 120minute mpeg2 setting was used. The audio was converted to ac3 as well. The file sizes for the two files are 2.88gigs and 990megs respectively. When brought into DVDSP4, the space meter(which we all know is horrible accurate) reads properly as around 3.6 gigs. But when trying to burn to a DVD-5 disc it says there is not enough space on the output media.
    Any ideas why this is happening? Thanks!

    not sure why DVDSP would give you this trouble. You might need to import to a new project to reset the disc meter. Try just doign the build and see if the size of the video_ts folder is correct.
    If not, check to make sure you are not burning to a CD instead of a DVD, stranger things have happened.

  • Trying to build a DVD image, DVDSP4 says not enough space

    I have many years' experience using DVD Studio Pro 4, so this hopefully is not a stupid question.
    I'm using an iMac with 80gb free and an external HDD with 12gb free.  I have authored a DVD in DVD Studio Pro 4.  The project says it's 4.6gb.
    I need to make a disc image file of the DVD so I can burn it to DVD media using another computer.  When I do this, it encodes for hours and then says "Formating Failed.  Not enough space of the output media"  (I might be paraphrasing.)
    The only possiblt output medias, the iMac and the external drive, both have plenty of space, and the project is under the limit.  So what gives?

    Let me try this again, because I think we're not communicating.
    I have authored a DVD Studio 4 project with menus and assets, etc.  It simulates just fine.  The tab on the top of the DVDSP screen indicates my project is 4.6gb.  This means I should have no problem turning this project into a DVD.  The computer I'm working on has no DVD burning capabilities so I want to create a disc image of the project instead of burning a DVD.  I have done this before, where DVDSP encodes and builds a file that I can then use Disk Utility to burn to a DVD.  So, once I have my disk image, I will transfer that file to another computer, and use Disk Utility on that second computer to burn the DVD from the disk image.
    NOW
    The problem I'm having is that DVDSP is not able to make the disk image.  When I go to "Build/Format", it should make a disk image, but instead, I get an error saying there is not enough space on the output device.  The "output device" in this case is my external Hard drive which has plenty of space.  That is why I am asking for help.

  • Java.io.IOException : Not enough space  when I use Runtime.getRuntime().exe

    Hi All,
    I am calling a shell script from the java using the Runtime class, the job of the shell script is to zip some content which is huge in size(max 500MB) while invoking the shell script i will give the arguments source & destination. I am using the waitFor() so that my java program will wait untill the shell script execution is over. Everything is working as expected but some times it's giving Exception java.io.IOException : Not enough space
    What could be the reason for getting this kind of error ? Your suggestions are more appreciated.
    Thanks,
    Krishna Rajendra A.

    I don't know what the problem is but make sure you follow the advice for stdout and stderr in http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html because I bet the output from stdout or stderr will tell you what your problem is.

  • Not enough space on DVD?

    i'm trying to burn a few DVD's of a few .mov files, but whenever it goes to burn it says there's not enough space on the output media. it's under 2 hours so that shouldn't be a problem, and i've burned stuff to the same type of disc that were larger than all these movies, so why would it not let me burn it?
    powermac g5   Mac OS X (10.4.3)  

    to be honest, i've no clue. i just started using DVDSP and every time i've just put the videos i wanted on the tracks and set up my menus and all worked fine. so how do i go about checking/fixing that?

  • Macintosh HD not enough space for time machine backup?

    I have a 128GB Macbook Air. When I first got it, I made a Time Machine backup of the system, but now when I go into the recovery and choose to restore from backup, it says the Macintosh HD only has 112 GB and that it's not enough space for some reason. Why would it have me do a backup that I can't Restore? I need to restore the backup.

    This procedure is a diagnostic test. It makes no changes to your data.
    Please triple-click anywhere in the line below on this page to select it:
    { diskutil list; echo; diskutil cs list; } | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
    The Terminal window doesn't show the output. Please don't copy anything from there.
    If any personal information appears in the output, anonymize before posting, but don’t remove the context.

  • Volume erase failed: Media kit reports not enough space on device

    I was having problems with the external drive where I store my Time Machine backups, so I tried plugging and unplugging the drive (per earlier advice, and something that had worked in the past), but could not mount the drive. I ran Disk Utility and tried to verify the disk, which told me the disk needed to be repaired. I tried to repair the disk only to get an error message that Disk Utility could not repair the disk and it needed to be reformatted. So I tried to erase the disk with Disk Utility only to get the error message "Volume erase failed: Media kit reports not enough space on this device for requested operation". I am not sure what else to try at this point and could not find any similar questions here.
    The drive in question is a 3TB USB Seagate Backup + Desk Media, formatted as Mac OS Extended (Journaled). It's divided into two partitions, one of which (2.2 TB) holds only Time Machine backups of my desktop and laptop and the other of which (800GB) is formatted similarly with some files stored on it. I was able to verify and repair this other partition. I'm running Disk Utility 13 on an iMac (2.8 GHz Intel Core 2 Duo) running OSX 10.8.5
    Any suggestions for what to try next would be appreciated.

    Just to let you know I appear to have the *exact* same problem, even down to the 3TB hard-drive in question.
    I read recently that a time machine backup should have its own physical hard disk, not a separate partition on an otherwise-used disk. I wish I'd known that in advance of buying the external drive, as I would not have invested in a 3TB one if I had known I could only use it for Time Machine alone.
    Dianeoforegon does make a fair point, though, in saying that all backups in one place is asking for problems down the line.
    Incidentally, this Time Machine problem first started occurring when I upgraded to Mavericks. 9 times out of 10 my Time Machine partition would go corrupt for no reason. This definitely hadn't been happening at all before Mavericks. That same upgrade also killed off my entire Boot Camp partition, which caused me major headaches and I eventually had to simply reformat that partition and start again.

  • Trying to upgrade to newest version of iPad software but not enough space on hard drive to backup the iPad. It is saying if I continue all content on iPad will be deleted! Can I get it back after uprade by just synching with itunes?

    Trying to upgrade iPad software to newest version. It downloads but stops while backing up and says not enough space on hard drive to back up if i continue all media on iPad will be lostor deleted.  Can I get it back after upgrade by just synching or can I set it to backup to an external drive?  Thanks for any help.  I only use the laptop for itunes now as it has such little space left.

    I would recommend deleting contents off your hard-drive to make space (how much is left..you should be having 15% free as a general practice) and backing up the phone prior to upgrading.

  • My Lacie external hard drive will not back up on Time Machine. Says there's not enough space. This has happened with every single external I've purchased. Thought TM was supposed to delete old backups??

    My Lacie External backed up on Time Machine after the first back up but now says there's not enough room. I thought TM deleted old back ups to save new versions. What am I doing wrong. This happens to me constantly. Every single external hard drive I've purchased for the MacBook Pro (5 of them) has not worked either initially or at the second back up. It either isn't formatted properly so I have to go to Genius bar to help me set up for the first back up, or after the first back up, it says there's not enough space and I have to go back to Genius Bar. Is there a way I can fix this on my own?

    I just purchased 2 external hardrives. a LaCie Minimus and a G Drive. Each 1 TB. The guy at Apple told me that would provide 2 good TM backups for me. My internal HD has 750 GB capacity, of which I'm using 700 GB. Perhaps the ratio is not great enough. I do wish they would have told me this before I purchased the two Bummmmer! I even had them format and get the first back-ups going because of issues I've had in the past. I also just bought a 750 GB for photos.
    So, I won't be able to buy another bigger external since I've just purchased 3. Ugh. Well, I'll just exclude some files and divide things up. Eventually, I just want my 20,000 iphotos on one of the 1TB externals, and a TM back-up on another so that iphoto will function once more. It really hates how many photos I have and is brutally punishing me for it.I seriously need to do some housecleaning!
    Thanks for the advice. Just moved from US to Australia last week and was hoping to upload a few photos and the domino effect has lead me to this. Just went to Genius Bar in Perth today and they told me how to reformat drive to transfer iphoto library over, but I got stuck at trying to back-up my TM.

  • Nokia 100 (not enough space for new messages)

    Hi!
    From time to time i get messages that there is a text message that wants to come through but that there is not enough space. I then delete some inbox messages and then within minutes i get the text. However, recently it has taken much more time for the text to come in after deleting old messages. 
    And why do i all of the sudden get a message that there is not enough space, then i delete some old messages, and NOTHING comes through? Why am i getting this so-called false alarm from time to time now?
    I really hope someone can help me with this problem!
    Thank you!

    Hi Friend,
    Much probably that "others" data is taking the most of usage space.
    So start to solve this issue deleting text messages.
    If the issue persists, connect your iPad with iTunes and check how much space "others" data is taking. try to reset your device by backup in iTunes.
    If still not working, I advice you to search ib other foruns. There are many pleople that faced this problem and successfully solve it
    Hope it helps

Maybe you are looking for

  • SQL Server 2012 Express error 9002 while restoring a backup from 2008

    Hi all, I have installed SQL Server 2012 Express on my laptop operating with win 8. Then I took the backup in my old laptop with SQL Server 2008R Express / Windows 7 and tried to restore it to the new one. After it restored it produced an error messa

  • A problem with Adobe Flash Player

    I have Mozilla Firefox 5.0.1 Any page where Adobe Flash Player is needed (for playing back video) does not work. It askes me to Install Adobe Flash 11, but it is alreade installed on my computer! For example this link does not work: http://www.vesti.

  • Questions regarding Dialog component.

    JDeveloper 11g + ADF BC + ADF RC I have two questions about the af:Dialog component. First, I notice there is a property called 'AffirmativeTextAndAccessKey'. Is there any way to set that to a double-click event? Second, is there any way to stretch a

  • Refine Edge vs Refine Mask

    Good day people What would you guys say is the relationship between the Refine Edge Dialog box and the Refine Mask dialog box? I'm busy with Advanced Photoshop and this is one of the short questions I have to answer. The only answer my textbook gives

  • Excel Preview App: Sign-In line

    When I tested the Excel Preview App I noticed a line on top that says "Sign in to get more functions" (translated back from german). This comes back on every start. How can I disable it? - So noone can say I didn't shared my feedback about this.