Not enough space to print the last record on each page

Hello,
My report looks like a simple list table, with the first row as the column header, followed by rows of records.
The fields are placed on the Detail section and they're set with "Can Grow" property. That means, records may have different row height, some may take 1 row per record, some may take 3 rows per record, depending on the data length. I use some vertical lines on the Detail section as the column seperators, and a horizontal line as the record seperator.
I've a Page Footer to show the page number and print date.
My problem is:
When the space of the last record on the current page isn't big enough, the record will be printed automatically on the second page, which is fine. But the vertical seperation lines are still displayed even though the details are printed on the second page. I got some "empty rows with vertical seperation lines" or I'd say an open-end table at the end of some pages then.
Is there a way to avoid this?
Your help is much appreciated. Thank you.
Agnes

You could draw an outline box from page header to page footer, then your internal lines would run from page header to page footer
so if the document extends to 2 pages, the page footer will print on the 1st page and therefore the bottom line of the box
only problem now would be that on the 2nd page the box will extend to the bottom of that page also, even if there is only 1 record

Similar Messages

10g 10 on XP PRO - Which property to print the master group on each page?

Hi,
I'm building a reports that displays the sum of orders totals per customer then per salesman.
All fields have "print on first page" property set.
However the salesman ename prints only on the first page of the report.
If I change to "print on every page", the whole install goes "booom" !! :-(
There are 3 repeating frames:
group_emp
--[group_customers]
-----[group_orders]
Here is the same report on SQLPlus (in case someone loses faith and needs a report badly)
set pagesize 40
set linesize 110
set pause on
set pause .........[Return]................
clear breaks
clear computes
ttitle center "Orders Totals by Employee"
break on ename skip page on custname skip 1
compute sum of order_total on ename
compute sum of order_total on custname
select
e.ename
, c.custname
, o.order_date
, o.order_total
from emp e, customers c, orders o
where e.empno = c.empno
and c.custno = o.custno
order by e.ename, c.custname, o.order_date
Many thanks if you can help
Message was edited by:
JeanParis

Hi Fs, just like I wrote, Reports decided to shut down immediately, so I had to stop running OC4J instance and shutdown the PC running the 3 Oracle services.
The PC has a Dual Core and 2 Gigabytes of Ram.
I checked the reports at my company today, the only difference is that the frames display on every page and the fields display once.
I think I have to reread the manuals before attempting to display one salesman per page.
Remember what we used to say on Compuserve: There is only one thing more stubborn than a bug, it's a stubborn debugger.

This site absolutely sucks. There is not enough space to ask the question and when I want to get to

Why dont you put the BODY part in the question section as well as the feedback section. in the question section the subject part is not even labelled.
Why should I have to jump over CIA like security hurdles just to ask a straight forward **bleep** question about a 9500 series laptop I just bought. AAAAAAAAAAAAAAAAAAAARRRRRRRRRRRRRGGGGGGGGGGH!!!!!!!!!!!!!!
I want to know how to install a new nvidia card in my Pavillion 9500 coz the existing one is causing red a blue flashes all over the screen and a driver update does not fix it.
IS THAT SO SENSITIVE A QUESTION???? REALLY???
Ross McNeilage Melbourne Australia.
ps GET YOUR ACT TOGETHER. Not everything is a matter of national security!!

Hi rosmcn,
The subject of the post is for a title that you can use to briefly describe what your problem is, and then you use the body to add as much detail as you can. In the body of the post, there is no space restriction, so you should have plenty of room to ask your question
There are no security measures that prevent you from posting because of length in the body, but if you are posting language blocked by the language filter, it won't let you post.
Please try asking your question in the Notebook Hardware forum, and let me know if you have any other issues.
Thanks,
SunshineF
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

HT4946 cannot find itunes backup on my PC (win xp). want to move over to external hard drive to restore from backup bc PC not enough space

i just restored my ipad2 to iOS 6.1.3 yesterday. i have been trying to restore from backup, but i keep getting error messages from itunes (running latest version of itunes) that says there is not enough space to save the backup on the computer. i have tried clearing up as much space on my PC (windows xp), but there is still not enough room. and ive tried disk cleanup on my computer and resetting the ipad and running it through recovery mode (as some articles sugggested it would help with restoring after failed attempts). i read on another question in the apple support discussions that someone just moved his whole backup folder into his external harddrive and then he was able to restore from backup.
the backup is definitely saved on my computer (itunes confirms that), and the backup folder is supposed to be here \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\, but im still not finding it with that file path. i get as far as "username" and then i dont see "application data" and so on. but when i try searching that file path in google chrome, i find it and i see it, but its strange that i cant find it in the "docs and settings" folder in my C drive.
please help! i just want to be able to move the backup folder to my external to restore from backup. thank you in advance!!

Thank you! I was able to find it. Im sorry, i have a few follow up questions. Does the iTunes have to be running from my external as well to do the restore from backup? And if so, how do I move iTunes to external and run it from there? Also, I just copied over the "backup" folder (last part of that file path to my external, is that enough, or did I have to copy it starting from the beginning (docs and settings and so forth)? Lastly, when I select restore from backup in iTunes, would it automatically know that it's the copy on my external to restore backup from? Or do I have to delete or do something with the original file path in my computer?
Thank you!

Imovie has not enough space

imovie has not enough space to finalize the project. Not in any small file. Start to export brings me the message "not enough space" close imovie. I have created a trailer and given this to imovie to upgrade this to a bigger project ~ 39 Min.. The project runs in full screen sometime not and has problems to show pictures. in the small viewer is runs. Copy the project to harddisc combine it and so on helps not. I have delete all old projects from imac hd to nas but this brings no success. I have done in the past a project with the same lenght but more photos and not so many movies and this was without any problem. From upgrade to upgrade the imovie runs slower, this is my feeling. My iMac is full of RAM and has definetly enough free space.
Could "again" size reducuction help me.
Are text files a problem?
I have all iPhoto pic's and movies at nas (1.6GHz) to hold my drive clean, the iphoto libary is at the Mac hd with 900 GB free space.
What is wrong?
To long project?
What is the max. lenght of imovie project?

Hi
I try a bit.
I have delete all old projects from imac hd to nas but this brings no success.
You are using a Non Destructive video editor = This means that after material is imported/captured to iMovie - it will not be touched at all. AND in iMovie Project (library) there will NOT be any Movie. What You find here is a small text document on HowTo the original imported/capture material is to be viewed (as Your Movie) - it just points and describes. So by deleting the project You'll not gain any noticeable amount of free space at all.
My iMac is full of RAM and has definitely enough free space.
The free space is not in RAM or external hard disks - IT is only the Main Start-Up (Mac OS) Hard Disk that counts and here space is Needed for iMovie/iDVD and Mac OS temp. files. And this space can not be addressed elsewhere.
Could "again" size reducuction help me.
Most probably not
Are text files a problem?
Not that I've heard about.
I have all iPhoto pic's and movies at nas (1.6GHz) to hold my drive clean, the iphoto libary is at the Mac hd with 900 GB free space.
If this is the Main Start-Up Hard Disk and it has > 900Gb free space - then this is more than OK
BUT - pic's and movies at nas (1.6GHz) - this I can not fully interpret - feeling says that's where the problem lies. External storage of VIDEO Must be on a (hfs) formatted hard disk - most other things works on UNIX/DOS/FAT32/Mac OS Exchange formatted ones - BUT Not Video - Nor for iMovie or FinalCut - Video file breaks up in 4Gb blocks and can not be mended any way I know of. Must be a Mac OS Extended (hfs) formatted one and I prefer FireWire.
What is wrong?
Most probably the external storage
To long project?
No - I made projects on several hour's - and with lot's of photos - No I don't think that.
What is the max. lenght of imovie project?
No idea for iM'08 to 11 - iMovie HD6 my record is > 6hour 20 minutes. With no problem.
Yours Bengt W

ORA-27102: out of memory SVR4 Error: 12: Not enough space

We got image copy of one of production server that runs on Solaris 9 and our SA guys restored and handed over to us (DBAs). There is only one database running on source server. I have to up the database on the new server. while startup the database I'm getting following error.
====================================================================
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Aug 6 16:36:14 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-27102: out of memory
SVR4 Error: 12: Not enough space
SQL>
====================================================================
ABOUT THE SERVER AND DATABASE
Server:
uname -a
SunOS ush** 5.9 Generic_Virtual sun4u sparc SUNW,T5240*
Database: Oracle 10.2.0.1.0
I'm giving the "top" command output below:
Before attempt to start the database:
load averages: 2.85, 9.39, 5.50 16:35:46
31 processes: 30 sleeping, 1 on cpu
CPU states: 98.9% idle, 0.7% user, 0.4% kernel, 0.0% iowait, 0.0% swap
Memory: 52G real, 239G free, 49M swap in use, 16G swap free
the moment I run the "startup" command
load averages: 1.54, 7.88, 5.20 16:36:44
33 processes: 31 sleeping, 2 on cpu
CPU states: 98.8% idle, 0.0% user, 1.2% kernel, 0.0% iowait, 0.0% swap
Memory: 52G real, 224G free, 15G swap in use, 771M swap free
and I compared the Semaphores and Kernel Parameters in /etc/system . Both are Identical.
and ulimit -a gives as below..
root@ush**> ulimit -a*
time(seconds) unlimited
file(blocks) unlimited
data(kbytes) unlimited
stack(kbytes) 8192
coredump(blocks) unlimited
nofiles(descriptors) 256
memory(kbytes) unlimited
root@ush**>*
and ipcs shows nothing as below:
root@ush**> ipcs*
IPC status from <running system> as of Fri Aug 6 19:45:06 PDT 2010
T ID KEY MODE OWNER GROUP
Message Queues:
Shared Memory:
Semaphores:
Finally Alert Log gives nothing, but "instance starting"...
Please let us know where else I should check for route cause ... Thank You.

and I compared the Semaphores and Kernel Parameters in /etc/system . Both are Identical.are identical initSID,ora or spfile being used to start the DB.
Clues indicate Oracle is requesting more shared memory than OS can provide.
Do any additional clues exist within alert_SID.log file?

Help: startup-config file open failed (Not enough space)

Who can help me ? I've an uc500 and he stil running. Now i want to change something and want to save the configuration first. But the following message appears : startup-config file open failed (Not enough space)
this is the output from a dir flash:
Directory of nvram:/
227 -rw-       25897                    <no date> startup-config
228 ----        1933                    <no date> private-config
229 -rw-       25897                    <no date> underlying-config
    1 ----          83                    <no date> persistent-data
    2 -rw-           0                    <no date> ifIndex-table
    3 -rw-         577                    <no date> IOS-Self-Sig#1.cer
    4 -rw-         615                    <no date> IOS-Self-Sig#2.cer
    5 -rw-         660                    <no date> vlan.dat
    6 -rw-         107                    <no date> cca.xml
    7 -rw-         586                    <no date> IOS-Self-Sig#3.cer
262144 bytes total (227094 bytes free)

OK.
Try this:
conf t
service compress-config
And see if that helps.
If not, see if you can tftp the running config off the router and TFTP it back to startup-config:
copy run tftp
copy tftp start
Then you can try a reload and see if it is cured.
I googled and found a few cases where alot of ACLs or NAT rules could cause MALOC errors (you would see those in your logs) when implemented and could manifest itself in this condition, which could be cured after the next reload, which is why I suggested that.
Of course, dont be remote when you do this and only do it during a maintenance window.
Steve

HT5772 i can't restore my backup from my itunes cause not enough space on phone.

i can't restore my backup from my itunes cause not enough space on phone.

The thing is my disk C: only have 24G space. After backup only left 2G. Can i restore my iphone through different location such as my external hard disk? Can i copy the back up folder to my external hard disk then delete the one at C: ?

TIME MACHINE UNABLE TO BACK UP AS NOT ENOUGH SPACE

I keep trying to back up my Macbook Pro (I have a Buffalo hard drive) but on time machine is says that there is not enough space to complete the back up

What is your question?

How to deal with IO Exception: Not Enough Space

I always get the error message like IO Exception: Not Enough Space, following is the information on my desk , is not suppose have this happy is that right ?
why ? and how to deal with ?? I use solars 10 with NetBean 6.9
# df -k
Filesystem kbytes used avail capacity Mounted on
rpool/ROOT/s10x_u8wos_08a
239468544 7338765 229954672 4% /
/devices 0 0 0 0% /devices
ctfs 0 0 0 0% /system/contract
proc 0 0 0 0% /proc
mnttab 0 0 0 0% /etc/mnttab
swap 610684 348 610336 1% /etc/svc/volatile
objfs 0 0 0 0% /system/object
sharefs 0 0 0 0% /etc/dfs/sharetab
/usr/lib/libc/libc_hwcap1.so.1
237293437 7338765 229954672 4% /lib/libc.so.1
fd 0 0 0 0% /dev/fd
swap 610484 148 610336 1% /tmp
swap 610360 24 610336 1% /var/run
rpool/export 239468544 23 229954672 1% /export
rpool/export/home 239468544 63960 229954672 1% /export/home
rpool 239468544 34 229954672 1% /rpool
#

Thank you for all the replies.
Just have time come to this forum:
think you are running out of swap space.Google surge this too,
at first I install solaria I give 512M out of totally 2G in memory,
then I run
# zfs create -V 512M rpool/additionalswap
# swap -a /dev/zvol/dsk/rpool/additionalswap
on meantime
swapfile dev swaplo blocks free
/dev/zvol/dsk/rpool/swap 181,3 8 1048568 1048568
# df -k
Filesystem kbytes used avail capacity Mounted on
rpool/ROOT/s10x_u8wos_08a
239468544 7280779 230012901 4% /
/devices 0 0 0 0% /devices
ctfs 0 0 0 0% /system/contract
proc 0 0 0 0% /proc
mnttab 0 0 0 0% /etc/mnttab
swap 392944 352 392592 1% /etc/svc/volatile
objfs 0 0 0 0% /system/object
sharefs 0 0 0 0% /etc/dfs/sharetab
/usr/lib/libc/libc_hwcap1.so.1
237293680 7280779 230012901 4% /lib/libc.so.1
fd 0 0 0 0% /dev/fd
swap 392760 168 392592 1% /tmp
swap 392616 24 392592 1% /var/run
rpool/export 239468544 23 230012901 1% /export
rpool/export/home 239468544 63989 230012901 1% /export/home
rpool 239468544 34 230012901 1% /rpool
/vol/dev/dsk/c7t0d0/unnamed_rmdisk:c
15618080 1985728 13632352 13% /rmdisk/unnamed_rmdisk
Edited by: Hjava on Nov 25, 2010 8:40 PM
Edited by: Hjava on Dec 9, 2010 2:09 AM
this link is useful
http://docs.sun.com/app/docs/doc/817-5093/gizet?l=zh_TW&a=view

How to get the first and the last record of every month within a time range in sql

I am trying to get the first record and the last record of each and every month in a given date range using sql. I have a sample code
where i have just selected everything within the date range now i have to extract the first and the last records of each and every month.
SELECT PurOrderNum,
OrderDate
FROM Purchasing.PurOrder
WHERE OrderDate >= '2013-02-28'
AND OrderDate <= '2014-12-29'

SELECT PurOrderNum,
OrderDate
FROM
SELECT PurOrderNum,
OrderDate,
MAX(OrderDate) OVER (PARTITION BY DATEDIFF(mm,0,OrderDate)) AS MaxDate,
MIN(OrderDate) OVER (PARTITION BY DATEDIFF(mm,0,OrderDate)) AS MinDate
FROM Purchasing.PurOrder
WHERE OrderDate >= '2013-02-28'
AND OrderDate <= '2014-12-29'
)t
WHERE OrderDate = MaxDate
OR OrderDate = MinDate
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

I changed my LCD last day and now i noticed all my pictures on my phone are gone. I tried to restore the back that I got yesterday but it wont let me because its telling me there is not enough space on my phone!!!

I changed my LCD last day and now i noticed all my pictures on my phone are gone. I tried to restore the back that I got yesterday but it wont let me because its telling me there is not enough space on my phone!!! That's wierd because I didn't download any app or anything else since my last backup and on the other hand about 3000 pictures are gone, how come there is not enough space left! I also check my usage on my phone and it shows that i have about 7.0 GB pictures!!! BUT my photos is empty! I want my picture back on my phone any solution anyone?

Thanks for your reply!
I just called the guy who changed my LCD and asked him what happend, he said there were no pictures on your phone when you gave it to me! i know he is lying tho!
My apple warranty is over and I have to pay them to get some help over the phone!

My wifes iphone was too full to record a video so I upgraded her cloud storage to 20g and did mine at same time. Cloud is showing 15g free storage butshe still cannot take any mor photos as "not enough memory" What is the point of paying for the extr

My wifes iphone was too full to record a video so I upgraded her cloud storage to 20g and did mine at same time. Cloud is showing 15g free storage butshe still cannot take any mor photos as "not enough memory" What is the point of paying for the extr

Hello Pushtheriver,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iCloud storage issues:
Get help using iCloud storage
This may also help:
Understanding iOS device capacity
You can sync and download many different types of content on your device. Some types of content (such as music and videos) typically take more space than others (such as notes and books). The amount of space taken by an app depends on the app's purpose; complex or graphically intense apps usually take more space than simpler apps.
If your device is near its capacity, you can remove some of the less used content to make room for more.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

DPM is out of disk space for the replica. (ID 58 Details: There is not enough space on the disk (0x80070070))

I constantly get these message on laptop backup, what actually does it mean?
DPM is out of disk space for the replica. (ID 58 Details: There is not enough space on the disk (0x80070070))
I set automatic growth on protection group and there is plenty space.

Auto-grow Key Points
1.) Auto-grow needs to be enabled for the datasource.
2.) We grow the replica/recovery point volume by 10gigs or by 25% whichever is higher.
3.) To prevent race conditions, we do not grow within 15 minutes of the last growth.
http://social.technet.microsoft.com/Forums/ru-RU/6c70079e-6d90-42e2-89c4-9ddc7fcf11f4/dpm-2012-is-out-of-disk-space-auto-growth-does-not-work
https://blogs.technet.com/b/dpm/archive/2011/06/06/how-to-use-and-troubleshoot-the-auto-heal-features-in-dpm-2010.aspx
http://robertanddpm.blogspot.ru/2010/09/shrink-volumes-auto-grow.html
Have a nice day !!!

I have backed up my ipad to my laptop prior to updating to the latest IOS and now I want to restore the backup back onto the ipad but it says there is not enough space? I have tried unticking all apps i no longer need, music etc but this still doesnt work

I have updated up my ipad2 which had the original version on it (4.??) to the latest version of IOS. Before I did this I backed up the ipad to my laptop so I wouldnt lose precious pics and videos of my baby boy. Now that the latest version is on the ipad it is now asking me if I want to start as a new ipad or restore my backup from itunes. So i select restore my backup from itunes and connect to itunes but it now says there is not enough space to do so. I have a feeling it is because there are alot of pics on our ipad which i presume are all in this backup, many of which we do not need on the ipad anymore but I have no idea on how I go about deleting these pics?? And how do I find where on my laptop this backup is and most importantly the video and pics of my baby boy.

Restoring an iPad from an iTunes-generated backup should not require an Apple ID password.
Did you encrypt the iPad backup? If so, then trying to restore will require entering the encryption password.

Not enough space to print the last record on each page

Similar Messages

Maybe you are looking for