Not enough virtual memory to run applications after Blackberry Desktop software installation

Hi,
I've an issue with Blackberry Desktop Software application, after installing it (versions 4.7) my laptops cannot open more applications after certain time, even you cannot open the Start menu or any other kind of window, it just shows a little box as it is trying to show the windows but does not have enough resources to complete the drawing; I have to close some windows to open another, I mean I can have opened only a certain numbers of applications.
I uninstalled the BBDS and I've the problem still, the only way to solve it, was formatting my laptop, after a time I though 5.0 version could has resolved this issue, so I installed it with my fresh laptop and happened the same behavior, in this moment the BBDS has uninstalled 3 months and the have problem yet.
I think the installation modify some windows registry that in some way disallow to free up memory, or does not inform to window there is enough memory ro tun another applications.
I noticed when increasing the Virtual memory I can have more applicationes opened but it is few.
I really apreciate any suggestion,
Thanks,
Model: Lenovo T60
RAM: 1GB RAM
Windows XP SP3 (it has latest available patches)
Virtual Memory configured from 1.5Gb to 3GB

the shortcut startup is the thing that adds (or not) the shortcut in the Startup menu, but the Desktop Manager starting at Windows start is stored in the registry.
I didn't bother to do all that, there is a clear option when you install the desktop manager that asks for automatic startup & automatic upgrade. I don't remember at which point (it's a shame, because I installed it less than 3 weeks ago and have already forgotten ! not eating enough fish), but it's there.
besides, I believe you can untick the option later, maybe in the Device Manager that is next to the windows clock.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Similar Messages

  • There is not enough free memory to run this program

    Hi all,
    I am running into an issue with OfficeXP SP3 that has been virtualized using ZAV 8.0.1 and registered using the msi method. First, when you try to open a document from a web browser (Firefox in my case) it will open the downloads window and show the file but never launch the virtualized Office. Then if you try double-clicking on the document in the downloads window, nothing happens. If you open the folder that the document was saved to and double-click on it nothing happens. If you go into open with and choose the virtualized officexp it gives this error: "There is not enough free memory to run this program. Quit one or more programs, and then try again."
    Now here is the really odd thing, you can double-click on a word/excel/etc document in MyDocuments, a network drive, anywhere and it will open the appropriate officexp application just fine. I will also mention that firefox is virtualized as well but the same process works fine with openoffice.org.
    This also happens if you choose to save the file to a specific location. It cannot be opened. However I just discovered that if you move it to somewhere else, say the desktop, it will open just fine.
    Anyone have an idea what might be causing this issue? Is it somehow related to the sandbox?
    Thanks,

    Look in the class section of the registry for the FF virt app... See if some of the same extentions are in there.
    I would guess that FF has its own file associations for those document types and that is whats failing.
    If you remove the file association conents (but leave the folder and set isoation to writecopy) then the FF virt should be able to view and use the workstation file associations for the virt XP.

  • "There is not enough virtual memory available. Please save your work and restart {0}"

    This seems to be the most recent similar post. Prior posts are not useful as they have supposedly been fixed.  The most relevant Microsoft connect case has been closed.  The reported new Microsoft connect case has been deleted without explanation.
    https://social.msdn.microsoft.com/Forums/expression/en-US/294b17e4-c986-4dc3-9fa6-b246a50a4339/vs-2013-update-4-there-is-not-enough-virtual-memory-availableerror?forum=visualstudiogeneral
    Yet, still the problem persists.  Only working on one small XAML file. VS2013 and Blend always report "There is not enough virtual memory available. Please save your work and restart {0}" (except when they report "Package 'DesignPackage'
    failed to load" when run in safe mode) Saved my work and restarted VS2013, Blend, and the computer. Followed all other suggestions as much as possible.
    There is an abundant available and virtual memory.  The only changes from last week to this is Microsoft updates.
    Has there been any new effort on this issue that I have missed?
    What is left to do?

    Get IT to do it. Get them to uninstall all the latest updates, since you can identify them as a proximal cause of the problem. Also, search MS Knowledge Base or do some googling for the exact error text.
    We have no tech support resorces; we're just users.
    A horse walks into a bar. The bartender asks "Why the long face?" "Because I was born into servitude and when I die my hooves will be used to make glue." It was at this point that the bartender realized he would not be getting a tip.

  • Problems loading applications using Blackberry Desktop software

    I am using a Blackberry Bold 9000 with OS 5.0.0.681 (Bundle 1137, Platform 5.2.064) and Desktop Software 6.0.0.40 (Bundle 42) on Windows XP. I have about 20 MB of memory available for apps, but I cannot load new applications using Blackberry Desktop software. Now I can remove or unload software with no problem. However, when I attempt to load applications or software that I don't have, the following happens: I can click on the grey cross icon under "Action" to indicate I want the module and status changes to "Pending Install". The apps I want are English UK, Spanish, Supplemental SureType Wordlists for English and Spanish, Blackberry Application Centre, DOD Root Certificates, TTY Support. I then see the following on on the screen: "Update - Uploading Device software -->" "Update - Loading applications -->" "Loading device modules -->" "Loading applications from device - Searching for available device software -->" "Loading applications from device - Read device service information -->" "Loading applications from device - Searching for available device software -->" And lo and behold - the applications are not loaded; they appear as uninstalled in the application list and I can't access them on my Blackberry. During this process the phone does not reboot... previously when changes were made the phone would reboot. My question is, is there a way to force Desktop Manager to load the applications? How can I load the software I want? I have done a wipe and reinstall of apps and OS on my phone; delete and registry clean of my laptop followed by reinstallation of Desktop Software; battery pull and SIM card pull, but to no avail. This is frustrating as I have friends with whom I converse with in Spanish but it isn't my first language so the spell checker is very useful. Any help would be appreciated.

    Same problem, after weeks of no problems.
    Hard reboot of 8520 several times, reboot desktop, tried different USB ports.
    Intellisync crashes on organizer sync and Destop Manager cannot read applications.
    Is there a fix?

  • Removing Applications from BlackBerry Desktop Software: After deleting the app the app name still shows in BBDS

    Hello, 
    I have installed multiple 3-rd party applications on my phone through the BlackBerry Desktop Manager. I am attempting to remove certain applications from the list.
    Here is what I experience:
    I click on Applications icon.  BBDS communicates with the phone and then displays a list of native applications. I click on Install/Remove button. A list of third party applications are displayed. I de-select an application and the hit Start. The phone is restarted. I can confirm that the application is removed from my phone, however, the application name is still displayed under Install/Remove applications. I even clicked on the app and highlighted the application but there is no option to remove the app from the list. When I click on Edit the delete option is disabled. My goal is to remove the 3rd party application from the list completely. Please help!
    Here is my system information:
    System: Mac
    OS: 10.6.8
    BlackBerry Desktop Software (Version 2.3.0 (build 12))
    My phone information:
    BlackBerry Curve 8530
    Carrier: Sprint

    Hi Bessick
                           On your Device Homescreen go to Options > Device > BlackBerry ID >  login with your BlackBerry ID ,After Login Open BBM and see if your BBM contacts are available .
    Or if you have a previous backup then connect your device and run BlackBerry Desktop Software > Click On device > Restore > You can select your BBM contact list to from the list which you can restore back on your device. 
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Blackberry desktop software installer forcing into various other applications.

    I have never had a Blackberry but this program/virus is on my computer and has been making my life rather difficult. Every time a run program on my computer this pop-up comes up. "Blackberry Desktop Software 6.1.....The feature you are trying to use is on a network resource that is unavailable.......Click OK to try again, or enter an alternate path to a folder containing the installation package 'Blackberry Desktop Software.msi' in the box below." This pop-up open along with everything i open on my computer. I usually just close it every time. Idk why this virus is on my computer but it needs to go. It is not an installed program on my computer. It's not even in regestry editor. But it persists in being present with everything I do.

    How to perform a clean uninstall of the BlackBerry Desktop Software or BlackBerry Link
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Not enough virtual memory

    Sigh.
    We have an old Explore Parliament CD-ROM which was produced
    using MM Director 5 in 1999. The CD-ROM still sells (a bit) and
    runs on most Windows PCs.
    However, we see around 10% - 15% of our customers getting the
    Director error message:
    - - - "This program requires at least 3 MB of virtual
    memory...."
    We are no longer able to update the source project to run
    under Dir 6 - 10 (there were many Lingo changes between Dir 5 and
    6), so: IS there any way to get past the Virtual Memory error ?
    Thanks very much!

    I also found this on the internet.
    Which is the BETTER WAY ???
    ====================================
    Change Virtual Memory Settings
    1. Click Start>Control Panel.
    2. Click on Performance and Maintenance.
    3. Click on the System icon at the bottom of the window. The
    System Properties window opens.
    4. Click on the Advanced tab.
    5. In the Performance section, click on the Settings button.
    The Performance Options window opens.
    6. Click on the Advanced tab.
    7. In the Virtual Memory section, click on Change. The
    Virtual Memory window opens
    8. Verify that the number next to Space available: is higher
    than 4000 MB (at least 6000 is recommended). If there is not
    sufficient space available, you will need to clear more space by
    removing files and programs you no longer use, before you can
    proceed with these instructions.
    9. Click on the radio button next to Custom size.
    10. In the boxes next to both Initial size (MB) and Maximum
    size (MB), type 4000.
    11. Click on the Set button. If you receive a message that
    you will need to restart the computer for settings to take effect,
    click OK.
    12. Click OK to close the Virtual Memory window.
    13. Click OK and then OK again.
    14. Close all open windows.
    15. Click Start>Shut Down and then choose Restart.
    16. After the computer restarts, try the program again.

  • Blackberry desktop software 7.0 not show applications

    Guys i have a problem with this
     ..When i open Blackberry desktop software 7.0  on the left side of this program is show
    Summary
    Applications
    Files
    - Media sync -
    Music
    Pictures
    Video
      ... This is normal right ?
      ** But when i connected with my playbook (OS version 2.1.0 )  the applications button on the left side of this program
    " IS GONE" ** I can not manage any applications on my PLAYBOOK
    I don't know why ?!?!
    Could anyone help me about this ...Thanks

    Hey NilePlayBook,
    Thanks for reaching out to me.
    This is correct you will not have the option to select Applications in BlackBerry Desktop Software.  You will still be able to create a backup if needed, or to access any files saved on the BlackBerry PlayBook.
    What kind of application management were you trying to do?  You can move or delete applications from the BlackBerry PlayBook.
    I look forward to your reply.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Blackberry Desktop Software for Mac not updating 9900

    Hi,
    please could someone assist me in this.
    I have a mac running the latest Blackberry Desktop Software for Mac. And a Bold 9900 on 7.0 bundle 1465. 
    The Blackberry Desktop Software says new update available 7.0.0.1672. So i proceed to update the blackberry. It says installing and reboots. But it still has the old version, and the Blackberry Desktop Software still says new version available. (7.0.0.1672) So im going in a loop.
    Any help would be greatly appreciated. Thanks

    Hey luckyBB,
    Welcome to the BlackBerry Support Community Forums.
    I noticed you listed your carrier as T-Mobile UK, this provider does not have the 9900 yet.  Can you explain what provider this 9900 is from so I can better assist in getting that bundle of software
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Not enough physical memory is available to power on this virtual machine with its configured settings.

    hi ... My opering system is windows 8.1 and my system RAM is 6 GB with intel core i3 processor...
    I got error in vmvare " not enough physical memory to start virtual  machine. then  after some day  i visit at your webside and read the bolg about this error solution and i  uninstalled the microsofts update like
    "KB2995388" then reboot the system, after that i search config.ini file in drive "C:\Program Files (x86)\VMware\VMware Workstation"  but i did'nt got this file, so i created a new "config.ini" file and write one line
    vmmon.disableHostParameters = “TRUE” and save the file , then i copied this file to vmware workstation , like this path 'C:\Program Files (x86)\VMware\VMware Workstation' after that i opened my vmware and power on virtula machine but still i getting same error like not enough physical memory..........plesae any one can help me ? and give me a better solution to solve this problem ?

    Welcome to the Community,
    without any details about the VMware Workstation version you are using and the blog you read it's pretty hard to help. Anyway, the issue you mentioned was resolved with VMware Workstation 10.0.4 (see VMware Workstation 10.0.4 Release Notes), so in case you are running an older version it may be worth updating.
    André
    Message was edited by: a.p. - Fixed typo in version number 10.0.4 (instead of 10.4)

  • HT2729 Downloaded 2 movies on iPad, 1 on desktop to watch during air, but unableto move desktop movie to iPad; not enough iPad memory for 3 movies.  After 1 movie is watched & deleted will I be able to download already rented 3rd movie without paying fee

    Downloaded 2 movies on iPad, 1 on desktop to watch during air trip, but unable to move desktop movie to iPad; not enough iPad memory for 3 movies.  After 1 movie is watched & deleted will I be able to download already rented 3rd movie without paying fee again?

    1. No
    2. You can only transfer a rental to an Apple TV 1, which Apple TV do you have.

  • 2146827284Microsoft Excel cannot open or save any more documents because there is not enough available memory or disk space

    Hi Experts,
    I am getting below error when Exporting data from my one web application to the Excel 2010 on Windows Server 2008 R2 ,
    02/29/2012 18:54:50
    Type : System.Exception, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b11a5c481859e569
    Message : -2146827284Microsoft Excel cannot open or save any more documents because there is not enough available memory or disk space.
    • To make more memory available, close workbooks or programs you no longer need.
    • To free disk space, delete files you no longer need from the disk you are saving to.
    The disk space is 30 GB free, I have cleared all the temp files, increased the virtual memory & internet temp files size to max but no luck

    You want to use this one here - MMC
    comexp.msc /32
    THAT will launch the MMC process
    as 32 bit then you'll the Microsoft Excel Application.
    Right Click -> Properties.
    What I did at this point was to select the Identity tab and then select "The Interactive User" (the default was "The launching user").  My app pool was already running as "LocalSystem".  I believe by running it as the Interactive User now that it
    has the right permissions to save workbooks.
    Everything worked after this.
    This was a tough one!
    R. Matt Sampson

  • "Not enough system memory" when there is?

    Hi,
    Yesterday I had a screen freeze and did a forced restart. After that I've been having a problem that will not go away, altho I have run Disk Warrior and Disk First Aid.
    When I try to launch applications I'm sometimes getting an error message saying: "There is not enough system memory, please close an application, etc."
    The puzzle is that I have plenty of free available memory when I'm getting this message. It also seems to jump between applications. First I couldn't open Word. Now Word launches but I can't open Internet Explorer, altho Mozilla launched okay. Re-starting and running Disk Warrior didn't help. I don't get it. What else should I do?
    Thanks much!

    Hi, Paul -
    Is it possible for it to change itself during a mishap (freeze)?
    It's just about impossible for that to happen. When a program's memory allocation settings are changed, the new numbers are not entered in an external document like most prefs setting. Instead, it changes a bit of the code in one of the resources in the program itself (judicious use of ResEdit will reveal this). For just that particular piece of code to be altered in an acceptable way as the result of a freeze is nigh impossible.
    However, there is a utility program named Reaper whiuch will make such changes with no input from the user. Its purpose is to automatically change the memory allocations for programs based on perceived usage and need. Unfortunately it will make such changes according to its logic, which is not constrained by the logic of the user.
    Check to see if Reaper has been installed. It uses a control panel as a user interface; not sure what the name of that control panel is, but it may be Reaper. If you find it has been installed, try deactivating it.

  • There is not enough free memory to load the entire file

    I saw an older reference to this error in a previous post which apparently got resolved, but didn't explain precisely how it got resolved:
    Michael Kitzmiller, "There is not enough free memory to load the entire file" #, 27 Jul 2007 5:23 am
    I presume that one answer is to rebuild the document from scratch, changing imported images to referenced images. But I want to recover the file as I put hours of work into it and expected that anything I can save that I also should be able to read back in. I will certainly change to referenced images, but I have to be able to open it first.
    thank you

    Web...
    Here is a smattering of ideas.
    Do you have ample unused HDD space? If not, defrag it, although in myu experience, this hardly makes a difference. Check your TEMP/TMP folders and clean them out. Consider downloading cCleaner and running it. Do everything you can to make ample room on your HDD and in places like your TEMP folders. If your HDD is congested, temporarily remove big but relatively unimportant applications and move data elsewhere for a while.
    Even with 4GB of RAM, Frame can only use somewhere between 2.7 - 3.2 GB of it under the very best of conditions, and that includes the application as well as the files. Unpacking image files can consume considerably more space than it takes to store them. For example, a 1024 x 768 color image requires more than 3.1MB to describe it as a 32-bit color image, yet when stored in JPEG format, it can be as small as 50kB, a compression of 65:1. Of course, it's not reasonable to assume that your document is comprised entirely of such highly-compressed images, but in the unachievable extreme, it would take 980MB to simultaneously open 15MB worth of those kind of files. The point here is to not fall into the trap of thinking a 15MB file comprising a lot of images needs little more than 15MB of RAM.
    Make sure ALL other applications are closed when trying to open your file...Outlook, IE or FireFox, Anti-Virus and Spyware apps, Word, etc.
    Consider sending a copy of the file to someone else to see if they can open it for you and delete some of the images before resaving it. If you have a backup copy, rename your current file and restore the backup. Maybe your working copy is corrupt. Who knows? Anything is probably worth trying as long as you have a save copy stored somewhere.
    Dennis...

  • Safari hangs: not enough program memory, while 90G HD and 4G ram, OS re-installed, removed files etc. (mac book pro, leopard)

    Safari hangs direct after starting up. Rainbow bol rotates around one hour after which a message is shown: "not enough program memory"
    More than 90G free on HD, even removed more files and installed OS and programs again. Nothing helps.
    Help

    SIG, thanks for your reaction. After reading my question again I understand it was not clear.
    The reason I mentioned the 90G free HD space was the information I found on internet about my problem in which it was assumed there was not enough RAM memory and the processor uses the HD for SWAP files?
    In any way my problem is still there and I like to add some information:
    MACBookPro OSX 10.6.7, 2.4 GHz duo, 4GB DDR3 RAM, L2 cache 3MB, 250 GB HD (90 GB free).
    What I have done untill now:
    Re-install OSX plus programs
    Reboot in safe mode (cold start with shift C pressed)
    A number of reports generated after a forced Safari stop were send to Apple. (by the way what are they doing with these? besides not helping me?).
    Just today I learned where to find the Safari cache file's which I will empty when I am back from work tonight.
    I hope, with this additional information you have some more suggestions. In any way I will come back with the result of emptying the Safari cache.

Maybe you are looking for