Not exporting full podcast

not matter what settings i try, when i click export to iweb (loads it in iweb fine) but not the entire podcast??? only about the 1st 7minutes (of over an hour show)
please help.

Press "c" to show it, and adjust it so it encompasses exactly the part you want to export.

Similar Messages

My Podcast is chopping off, not the full podcast

Hello,
After about a year of having no problems, the last two or three podcasts that I've done has had a strange thing happen. Many of the subscribers are only getting 11-15 minutes of a 40 minute podcast.
When they clear the podcast and download it a second time, it comes down in full. It even happened to me this week.
I am uploading the full podcast before I update the RSS. The RSS is 100% validated in Feed Validator, my RSS has gotten the new categories updated from iTunes, I'm at a loss why this is happening.
Any ideas? Thank you!

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

FCP not exporting full Quicktime

Hi,
I am trying to export a quicktime and for some reason FCP will not export the full version, it claims to be done, but only exports 6 out of the 7 minutes. My markers are set appropriately. I've never seen this before, any suggestions?

What codec are you using for your export? What are your sequence settings? Try setting an in and an out for the last minute of your sequence and see if it will export. You might try copying the contents of your sequence to a new sequence to see if that makes a difference.

CLIENT_TEXT_IO does not export full data

Hi everyone,
I am using CLIENT_TEXT_IO to export data into a text file, but the data is not fully written and terminated but message appears successfully exported (as mentioned in code).
I tried it with TEXT_IO and its working fine for me but on the client side its giving this error:
"File Creation was interrupted. Error 302000: non-Oracle exception"
any suggestions?

DECLARE
in_file CLIENT_TEXT_IO.FILE_TYPE;
linebuf VARCHAR2(4000);
V_ALT NUMBER;
filename VARCHAR2(1000) :='S:\SASData\birth_death\Rawdata\SAS-' || TO_CHAR(SYSDATE, 'DDMMRRRR-HH24MISS') || '.txt';
          CURSOR C IS
          SELECT BNF_CHILD_CPRNO || '@' || BNF_NO || '@' || HC_CODE || '@' ||
          TO_CHAR(BNF_REG_DT, 'DD/MON/RRRR') || '@' ||
          TO_CHAR(BNF_CHILD_DOB, 'DD/MON/RRRR') || '@' ||
          BNF_CHILD_DLVRY_ORDER || '@' || BNF_CHILD_SEX || '@' || HCF_CODE || '@' ||
          DLVRYCOND_ID || '@' || DLVRY_TYPE_ID || '@' || BNF_WT_KG || '@' ||
          BNF_WT_GM || '@' || BNF_GEST_WEEK || '@' || BNF_GEST_DAY || '@' ||
          BLK_CODE || '@' || TO_CHAR(BNF_FATH_DOB, 'DD/MON/RRRR') || '@' ||
          BNF_FATH_COUNCODE || '@' ||
          TO_CHAR(BNF_MOTH_DOB || 'DD/MON/RRRR') || '@' ||
          BNF_MOTH_COUNCODE || '@' || BNF_MRG_DUR_YR || '@' ||
          BNF_MRG_DUR_MM || '@' || BNF_NO_OF_BIRTH || '@' || BNF_PRV_ALIVE || '@' ||
          BNF_PRV_DEAD || '@' || BNF_DLVRY_INTRVL_YR || '@' ||
          BNF_DLVRY_INTRVL_MM || '@' || BNF_POD_COUNCODE || '@' ||
          BNF_MOTH_RELCODE || '@' || BNF_FATH_RELCODE || '@' ||
          BNF_MOTH_CPR || '@' || BNF_FATH_QUALOBTCODE || '@' ||
          BNF_MOTH_QUALOBTCODE || '@' || BNF_STATUS || '@' || BNF_PARA MYDATA
          FROM EBIRTH_USER.T_EBIRTH_BNF T
          WHERE BNF_REG_DT BETWEEN :REG_FDATE AND :REG_TDATE
          AND UPPER(BNF_REC_STATUS) = 'Y';--Consider only Active status Y
BEGIN
P_VALIDATE_RANGE;     --CHECK IF DATA EXISTS
          IF CLIENT_TEXT_IO.Is_Open(in_file) THEN
          CLIENT_TEXT_IO.Fclose(in_file);
          END IF;
in_file := CLIENT_TEXT_IO.FOPEN(filename, 'W');
FOR I IN C LOOP
linebuf := I.MYDATA;
CLIENT_TEXT_IO.PUT_LINE(in_file, linebuf);
synchronize;
END LOOP;
CLIENT_TEXT_IO.FCLOSE(in_file);
SET_ALERT_PROPERTY('AL_CAU_OK',TITLE,'Exporting Status');
filename := replace(filename,'S:\SASData\birth_death\Rawdata\','');
          SET_ALERT_PROPERTY('AL_CAU_OK',ALERT_MESSAGE_TEXT,'File '||filename||' Successfully Created.');
          V_ALT := SHOW_ALERT('AL_CAU_OK');
EXCEPTION
WHEN NO_DATA_FOUND THEN
CLIENT_TEXT_IO.FCLOSE(in_file);
WHEN OTHERS THEN
--MESSAGE(sqlerrm);MESSAGE(sqlerrm);
SET_ALERT_PROPERTY('AL_STOP_OK',TITLE,'Exporting Status');
               SET_ALERT_PROPERTY('AL_STOP_OK',ALERT_MESSAGE_TEXT,'File Creation was interrupted. Error: '||sqlerrm);
               V_ALT := SHOW_ALERT('AL_STOP_OK');
RAISE FORM_TRIGGER_FAILURE;
END;
Edited by: rha2 on Jul 11, 2012 10:26 AM

When exporting files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might do 524 images but not the full 600. I've tried resetting Aperture, it's the latest version etc etc. Help please!

If anyone can help me with this I would be seriously grateful.
When exporting mutliple files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might make 524 pages but not the full 600. I've tried resetting Aperture and its persmission and am using the latest version of 3.
I have 3600 images which I need to upload as sublfolders, each with their own URL and at the moment Aperture is dropping of anything from 1 to 90 images.
This is critical as people need to see each and every on of these images online. So if a file has 600 photos in it, Aperture should make a URL with 600 full image pages. And this is what it's not doing. On small files, say 30 or so it seems to work well, it's when it gets to more than that the problem starts.
I've used Aperture in the past under previous versions and not had this problem.
Any help would be great.
Thanks.
Bob.

Hi Jack,
Thanks for responding (as it seems as though no one else has been able to provide any insight as of yet)! Not sure if you saw my recent post, but the version of Aperture on the 2008 MacBook has been upgraded to 3.1.2 (not sure how; I bought it in 2009, but only have OS X 10.5.8... which apparently can't house 3.1.2 of Aperture, but hey, like many other anomalies i'm encountering, I'm no longer surprised!). I am unable to upgrade it any further, as it warns me that my OS X does not fit the requirements. I exported the projects as libraries; however, like I posted before, apparently these are from too old of a version for the new Aperture (3.3.1) to handle and import.
It's getting to the point where I'd almost pay to upgrade the OS X on my previous MacBook (10.5.8) to something newer in order to THEN update Aperture to a newer version; however, my previous MacBook simply cannot handle this (the specs are awful -- hence my decision to save up and upgrade to the newest MBP with Retina).
I've spent hours upon hours transferring files, libraries as projects, previews, versions, even masters (though, apparently some of them aren't accessible?) with no luck. I've rebuilt the library and reprocessed everything. And this is all after having to return one MBP already since Aperture 3.3.1 is glitch-y as it is, and froze everything for having a "managed library". So, now that I know that I have to deal with a referenced library in Aperture... I just need to actually transfer my previous library to my new one (hopefully WITH adjustments since these are years worth of photos and work).
Again, any help is appreciated. I've lost enough sleep, time, and vision health over this at this point.
Also, I know Migration Assistant is an option, I was told that it wouldn't work properly anyway because of the different operating systems, and the potential for problems.

Podcast not exporting chapters

Hi all. I have a podcast episode here (~45 mins) and for some reason, it's not exporting chapter markers in AAC exports (through iTunes or to disk). It is based on a template project that I have used in the past (last time was ~May or so), and those worked fine.
I just tried to re-export another podcast I had made previously, based on the same template project, and it exported exactly as expected. So there's something with this file, it would seem.
The Console log shows this:
[0x0-0x558558].com.apple.garageband[38040] An error occured while parsing the TeXML document.
[0x0-0x558558].com.apple.garageband[38040] Line: 1, Position: 4865
[0x0-0x558558].com.apple.garageband[38040] Description: An internal QuickTime error occured (6)
GarageBand[38040] Audio engine overloaded, resetting
Seems like GarageBand isn't generating the podcast XML properly for the conversion process? I looked in the .band bundle, but didn't see the file to examine it.
Help?

There was a '&' elusive and hiding behind some uppercase letters. I needed to borrow some blueblocker sunglasses and hunting gear to find it. Wiley little ampersand. Those things are tricky to catch.
May I now say that I think that it's completely stupid that Apple doesn't filter those text strings, or at least notify in the help what the allowed characters are? About to submit a bug report.
Thanks for the help.

Full list of schemas not exported / imported when FULL=Y

Hi Guys,
Verison: 10.2.0.5
Can advise on the full list of schemas not exported / imported when FULL=Y?
thanks!

dbaing wrote:
Hi Guys,
Verison: 10.2.0.5
Can advise on the full list of schemas not exported / imported when FULL=Y?
thanks!System schemas. Please see the following:
http://docs.oracle.com/cd/B19306_01/server.102/b14215/dp_export.htm#i1006790
http://docs.oracle.com/cd/E11882_01/server.112/e22490/dp_export.htm#i1006790
You may also be interested in the following:
-How to Perform A Full Database Export Import During Upgrade, Migrate, Copy Or Move Of A Database [ID 286775.1]
-Oracle DataPump Quick Start [ID 413965.1]
-How To move Or Copy A Database Using DataPump [ID 855268.1]

Enhanced podcast NOT exporting chapters

I have been podcasting for more than a year and I just started having this problem. When I export an enhanced podcast (to disk or iWeb), the resulting .m4a does not include the chapters.
I have the podcast track active when I export. Everything looks as it should, but no matter how many times I export the project, I don't get the chapters. Sometimes I don't even get the episode artwork.
PLEASE!! Help me out. I have a project that is ready to launch, but I need to have the chapters included.
Anyone?

Oh!! I am having this EXACT same problem. My other podcasts exported with the chapters and artwork I placed for them, and now it does not export the art or chapters. I am doing exactly the same thing I was doing before.
Please help!!! Did you find a solution to this??
Does anyone out there know how to fix this?
Susie

Full video not exporting

For some reason FCP will not export the full timeline I'm working on.
The video files are HD, and I'm trying to export in Apple ProRes, something along the lines of 1080.
Is there any reason this should be happening?

Could you flesh that out a bit? What is happening, exactly?

Links not displaying in podcasts

For some reason, whenever I export a podcast, none of the clickable links show up in the chapter markers after it's mixed down into my iTunes. I've tried changing all sorts of settings, started from scratch, and done just about everything I can think of to get clickable links to show up in the finished podcast, all to no avail.

Hi Rick,
That's ok - there is probably every reason to doubt me - I am
quite rusty with RoboHelp, so chances are it is me!!
Yes, the topic definitely exists... but if full path name can
effect, then that could defnitely be a problem....
the path to the link is:
../../General_functionality/Printing_and_Exporting/Print_and_Export.htm
& the full project location (going down to the folder
where the link won't work from is:
My Documents\test APRE HELP
FILES\APRE_Front_End_User_Guide_Files\APRE_screen_overview\APRE_screen_overview_menus
But why is it only occurring in this help page & not with
links on any other pages?
I think u have solved it - I just tried adding a link to the
topic to another topic in the same sub-folder & it works fine.
So I'll rename these folders & see how I get on.
thankyou very much for your help!!
regards
Maxine

Acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)

I use the CS6 suite with Acrobat XI at windows platform.
When I want to save a file from InDesign as .pdf with output intention eci_iso_coated_v2_300 the result is a .pdf with more than 300% ink coverage.
I tried to transform the result in Acrobat XI into this standard output intention, but also the result has more than 300 % ink coverage.
What is the reason of this bug?
Before with Acrobat X this worked without problems

Hi Rob,
I was told the new way to work would be to draw files via Bridge direct into the InDesign file
and I thought automatically the color would not be changed.
my colourmanagement setting in bridge for the whole CS6 was ECI isocoated_V2_300
The Illustrator file was saved without color profile.
In this test file I used 3 kinds of black: background of pirate in cmyk 79,34 / 72,78 / 59,38 / 79,88 = ink coverage 291 %
DÜSSELPIRATEN in “black” (if you would convert this in the file with the cmyk button it would be the same ink-percentage as before
“e.V.” was set to 100 % k
I set the preferences for Acrobat from InDesign CS6 as pdf X4 with profile eci isocoatedV2_300 in three ways:
no color conversion
convert to profile
convert to profile keeping existing values
in all tree files the pirates background has 322 % ink coverage instead of 291 %
Why does Acrobat convert “black” in the wrong way? If I click in Illustrator on the 4c button to convert the “black” into 4c it is 291% ink
Acrobat should come to the same result with all profiles: iso coated V2 and iso coated V2_300
The same happens also by saving as .pdf X3 or .X1
The minimum what I expect is, that Acrobat reduces ink coverage for black to 300 %
I also made test with the new ECI profiles for laminated prints from 2012.
And with newspaper profiles
In this case the ink coverage comes below 300 %, but only when I choose convert to profile.
And then the 100 % k converts to cmyk, what I don’t want to have with text.
Is there no way to reduce ink coverage below a special percentage without changing Text 100% k
And is there a bug in Acrobat XI with the ECI IsoCoated_V2_300 Profile? For there is no color reduction below 300 % in all conversion settings.
I can’t test this with Acrobat X or IX, for my computers with this software don’t run with CS6 64 bit.
enclosed you find my files
Kind regards
Lutz Hanbueckers
Hanbueckers Werbung GmbH
Brandsackerstr. 5
40764 Langenfeld
P.O. Box 40 02 01
40242 Düsseldorf
Tel. +49 02173 1 09 44 - 0
Fax +49 02173 1 09 44 - 10
[email protected] <mailto:[email protected]>
www.hanbueckers.de
Visit our site
Steady attractive offers!!!
HR Düsseldorf B 26 480
owner Manager: Lutz Hanbueckers
Von: Rob Day [email protected]
Gesendet: Samstag, 2. März 2013 04:26
An: Hanbueckers Werbung
Betreff: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
Re: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
created by Rob Day <http://forums.adobe.com/people/rob+day> in InDesign - View the full discussion <http://forums.adobe.com/message/5115613#5115613

Custom font not exported in PDF

Hello Guys,
In my web application, I have a crystal report developed in CR11 R2 SP3. The report uses custom font and it works fine when shown in report viewer.
However I get errors while exporting report as PDF.
1) In windows 2003 server, the pdf is exported without the font values.
2) In Windows XP, pdf is not exported at all and I get an error:
Error in File C:
WINDOWS
TEMP
CrystalReport1 {6A26233D-4832-44B1-AC8E-A21421F6A2E4}.rpt:
Error detected by export DLL.
Can anybody please help. One more thing. The custom font is fine and has been working fine in other crystal report based applications.
Thanks,
Shahzad

Ok, two suggestions:
A)
1) On your web app that throws the error, place label and a text box on your web form
2) Use the custom font for the label and in the text box
3) Run the app
Does that work?
B)
If it does, I'd recommend using filemon and regmon utilities to fins out what is failing. Filemon can be found here:
http://www.microsoft.com/technet/sysinternals/utilities/filemon.mspx
Regmon is here;
http://www.microsoft.com/technet/sysinternals/utilities/regmon.mspx
Instructions on how to use the above:
1) Load Filemon
2) Press Ctrl + L. This will bring up the filter window.
3) In the 'include' text box, put the name of the aspnet worker process, without the full path. ie: aspnet_wp.exe (ok)
4) Click <OK>
5) Press Ctrl + X to clear the display.
6) run your application, get it to the point where it errors.
7) Save the filemon log. File -> Save as
8) Look for files where the 'result' column is not successful.
Regmon
Here is how to use it:
1) Load Regmon
2) Press Ctrl + L. This will bring up the filter window.
3) In the 'include' text box, put the name of the aspnet worker process, without the full path. ie: aspnet_wp.exe
4) Click <OK>
5) Press Ctrl + X to clear the display.
6) run your application, get it to the point where it errors.
7) Save the Regmon log. File -> Save as
8) Look for files where the 'result' column is not successful.
Ludek

Questions for Export Full dump

According to Oracle 10.1 Utility Document, the Full Export Dump option has following restriction: "The following system schemas are not exported as part of a Full export because the metadata they contain is exported as part of other objects in the dump file set: SYS, ORDSYS, ORDPLUGINS, CTXSYS, MDSYS, LBACSYS, and XDB." So what this differentiates with using the export with schema option, if there is only one user defined schema (ex HR). In other words, if I use the schema=hr in export, does it also included the part of SYS, ORDSYS...all system objects. I am kind confused. I want to export dump the full database but not parts of my user schema.

Hi,
• Full – exports the contents of the entire database. This can be time consuming and requires substantial disk space, depending on the size of the database.
• User – exports all objects within a particular schema. If user SCOTT performs a user mode export, all of the objects belonging to SCOTT will be exported.
http://www.remote-dba.net/teas_rem_util7.htm
Cheers

Missing grant with full export/full import.

We have the following problem which is unexplained:
Using Oracle 9.0.1.4 we full export a database and we import it in full mode in another database which is also running Oracle 9.0.1.4. The database has 1 application schema which owns a lot of PL/SQL object packages and triggers.
In the source database, all objects are valid and schema owner has SELECT privileges on V$SESSION and execute permission on DBMS_ALERT and DBMS_PIPE.
I cannot tell you if these privileges have been granted directly or with a role.
In the target database, package bodys and triggers using V$SESSION and DBMS_ALERT/DBMS_PIPE are invalid because schema owner has not the corresponding privileges.
Schema owner already existed in the target database. Is it normal than the corresponding privileges have not been imported ?
I cannot give you the exp/imp command lines but I'm sure full export/full import have been run (I've checked the import log).
Thanks.
Message was edited by:
Pierre Forstmann

See MetaLink Note:97902.1
When performing a full export of a database, both objects belonging to SYS and object privileges on SYS's objects (e.g. admin views such as DBA_SEGMENTS, etc.) are not exported.
To generate the missing privileges you can use the follwing script
Connect to the original database (the one full export was done from) as SYSTEM using sqlplus and run this script:
set hea off
set pagesize 0
set feedback off
spool objs_upg.sql
select 'grant '||privilege||' on '||owner||'.'||
table_name||' to '||grantee||' '||
decode(grantable,'YES','WITH Grant option')||';'
from dba_tab_privs
where owner = 'SYS'
select 'grant '||privilege||' ('||column_name||') '||
' on '||owner||'.'||table_name||' to '||grantee||' '||
decode(grantable,'YES','WITH Grant option')||';'
from dba_col_privs
where owner = 'SYS'
spool off

Exporting full size Jpegs from DNG converted files

Hi there
I imported some RAW files into Lightroom 4, which I then copied/converted to DNG, then edited them. I now want to export them as full size, high-quality jpegs but I only seem to be able to export them at a maximum of about 800kb, which is far lower than full-size. Is this to do with first the conversion to DNG from RAW on the import? Am I best copying them from raw and not converting them to DNG at all? Next question is, will I have to import the original RAWs again and re-edit them to be able to export as full-size high quality jpegs or is there some way to not have to do them again? Many thanks, Sophie

The curious thing is that when I try to export full size jpegs through the email function,
Do you mean exporting through the e-mail the EXACT SAME photos that you were discussing above?
Have you done any cropping of the photos? What is the size, in pixels, of one of these photos according to Lightroom? What is the size, in pixels, of the corresponding exported photo, according to your operating system?
Can you show us screen captures of the export dialog box?
At this time, I am not going to deal with the print at A4 size being pixelated, as printing introduces a lot of other places where something can go wrong. To see if the problem is in the export, I want to know if you look at the exported photo outside of Lightroom, does it appear pixelated or not?

Not exporting full podcast

Similar Messages

Maybe you are looking for