Not find driver..after change motherboard

hello..
my laptop have prblem before and was change the motherboard..
when i format my laptop to win xp...
i cant find the driver for audio,video,sm controller,bus system device and etc...

Hi Abdul,
Thank you very much for quick reply.
After I change the parfilename I do see that registered
service name get affects, but I still can't use it from
the portal component that resides inside the changed
parfile, unless I change the alias of the service
EVERYWHERE in the project (including soapconfig.xml file).
It makes some sense if I leave the previous par file with
the original service name at the portal, but it doesn't
(at least to me) if I remove the first par file (what
removes the service too) and upload the new one only
with the original service name. What do you say?
Thank you,
Yuri

Similar Messages

AirPrint - iPhone 5 can not find printer after router change

AirPrint - iPhone 5 can not find printer after router change; however router is exact replacement of previous one (Zyxel, issued by Imagine wireless). AirPrint was working previously. Printer is on same network. Wireless printing working fine. Have tried rebooting prtiner, phone and router. Any suggestions?

I'd look to HP for support.
Here's an HP Airprint-related trouble-shooting page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03314085&tmp_task=solveCate gory&cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0001&lc=en&product=5271613
Lots more info on the HP support site.

WAMPSERVER 'PDOException' with message 'could not find driver'

Hi All,
I'm running wampserver 64 bit version with:
Apache : 2.4.4 MySQL : 5.6.12 PHP : 5.4.12 PHPMyAdmin : 4.0.4 SqlBuddy : 1.3.3 XDebug : 2.2.3
I have downloaded the Microsoft Drivers 3.0 for PHP for SQL Server.
I have put the drivers in my ext folder C:\wamp\bin\php\php5.4.12\ext
php_pdo_sqlsrv_54_ts.dll
php_sqlsrv_54_ts.dll
I have changed my php.ini file to included:
extension=php_sqlsrv_54_ts.dll
extension=php_pdo_sqlsrv_54_ts.dll
I have restarted my PC.
When I run the following php code:
<?php
$database = "master";
$conn = new PDO( "sqlsrv:server=(local) ; Database = $database", "", "");
?>
I still get the following error message:
Fatal error: Uncaught exception 'PDOException' with message 'could not find driver' in W:\wamp\www\sqlservertestV02.php on line 4
I have tried everything I can think of but the driver does not seem to load correctly.
Any help would be greatly appreciated.
Kind regards,
Ernst.

Hello,
The Microsoft Drivers 3.0 for PHP for SQL Server is used to read and write SQL Server data from within PHP scripts. Since you use MySQL, you should install PDO Driver for MySQL and use pdo_mysql module.
Reference: http://cn2.php.net/pdo_mysql
Regards,
Fanny Liu
If you have any feedback on our support, please click
here.
Fanny Liu
TechNet Community Support

Can not find driver for Thinkpad T500

I can not find driver for Thinkpad T500? Could you please help me?
Moderator edit: Matched Subject to content.

Thanks to the folks at Kepware. I was able to get this working for CompactLogix L32E.
Step 1: In NI OPC Server Create a new Channel. Channel Name can be whatever you want.
Step 2: Device driver will be ControlLogix Ethernet. You can also enable diagnostics if you want.
Step 3: Network adapter. I used default setting.
Step 4: Write only latest values. Duty at 10. ( These are default settings and are recommended.)
Step 5: Finish new Channel setup
Step 6: Click on Icon to create new device
Step 7: Device Name can be whatever you chose.
Step 8: Select Device Model in this case CompactLogix 5300
Step 9: Device ID For me was IP Address XXX.XXX.XXX.XXX,1,0 (Note the 1 directs path to backplane. The 0 to the slot where processor is)
Step 9: Device timing. Leave at defaults.
Step 10: Auto demotion leave unchecked.
Step 11: Leave at defaults Do not generate on startup Delete on create and allow subgroups
Step 12: Port and watchdogs at default settings
Step 13: Project options leave at default. (In my case I changed to short as that is what most of my tags were)
Step 14: Create tagname from device.
Step 14: Finish Device setup.
You now have two options.
Option 1: Start creating tags as you need them. (This is what I did)
Option 2: Right Click newly created device and select properities. Then select database creation and click auto create.
Go To Lookout and create new driver.
Select OPC Client
Server name will be from dropdown menu. National Instruments:NIOPCServers
Click okay
You should be done and smiling.

10.5.5 update hangs panic msg. can not find driver for 7,2,5 system dualG5

Down loaded 10.5.5 and ran it, loaded software and rebooted on G5 Dual 2Ghz system.
10.5.4 worked no problem.
Got back panic saying can not find driver for platform 7,2,5
Anybody know how to back this update back to 10.5.4?
or fix this to get 10.5.5 working.
Thanks

I am experiencing something very similar. After downloading the update, it closes all app's and attempts to install. I've been looking at a stalled progress bar for 30 minutes.... No error messages yet, but my prospects don't look good. Any advice?

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.)

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.) Do you know where I go to change the setting to allow me to "always allow" cookies?

Hi lisaarnett111,
If you are having issues turning on Always Allow for cookies in Safari on your iPad, you may want to check to make sure that you don't have Private Browsing enabled, as noted in the following article:
Turn Private Browsing on or off on your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

I had changed my Apple ID on my PC and realized iCloud. On my iphone iCloud account is on the old ID. Could not find where to change it. In Settings-iTunes

I had changed my Apple ID on my PC and realized iCloud. On my iphone iCloud account is on the old ID. Could not find where to change it. In Settings-iTunes & App Stores – I had replaced the old ID with the new one. On my iPad 2 – iCloud account is on old ID, I cannot change it,
do i have to delete iCloud accounts and re=build them ?

Yes, you got it. there is no way to change - just delete. Usually there is no loss, but photostream is reset, so make sure to back up your pictures before you do.

While i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

while i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

Hi there aliyan,
I would recommend taking a look at the troubleshooting steps for "No SIM" found in the article below.
If you see 'No SIM' alert on iPhone
-Griff W.

Unable to init TestServlet. Could not find driver.

Hi I am testing a small servlet to get data of oracle database. However, it gives me an error in compilation with the init section. The details is as follows:
The part of code where the problem is as follows:
public void init(ServletConfig conf) throws ServletException {
super.init(conf);
Class.forName("oracle.jdbc.driver.OracleDriver");
          conn = DriverManager.getConnection(
          "jdbc:oracle:thin:@myserver:1521:cooler",
     "scott", "tiger");
java142: not a statement
Unable to init TestServlet. Could not find driver.
I would appreciate any help/suggestion. Thanks in advance. Regards.

I think the problem is not with Driver.
U have to embed the code in either Service, doGet or doPost like method. U have directly written the code in servlet class if the code snippet is same as shown in Ques.
Sunil

Can't mount drive after changing permissions to 777

Hey guys,
I'm having trouble mounting an external hard drive after I changed it's permissions to 777. With "get info" on the disk itself I changed the permissions of me, staff, everyone to read & write access for the whole disk incl. "apply to enclosed items". Now I can't mount it, disk utility tells me it needs repairing, but repair permission and repair disk both fail. It gave me read access at one point but obvioulsy I couldn't change the permissions from there.
It's a 2TB disk in a JBOD enclosure if that makes any difference and was serving as SMB media server for my home network via USB on my router (Linksys E4200).
Any help would be greatly appreciated.
Thanks in advance,
V

worked first time I plugged it in so Jolly Giant you are 100% right
my hub was a powered hub which I chose not to plug in not thinking TM would need power
my question is why? (this is a rhetorical question not one to you Jolly Giant unless you know why)
I purchased a hub which is "powerable" but why leave the "brick" plugged in all the time when nothing plugged into it needs the power?
the external hard disk (at least this model) has power of its own
the printer has power on its own
the Time Capsule has power on its own
All 3 were functioning as expected except in Time Machine when I chose to not plug the hub in
Looks like I will have to burn a little extra energy and plug in my USB hub just to make Time Machine function - this seems fuelish

ICloud status not displayed correctly after changing tags

Hi everybody,
I have just below 25 000 songs in the iTunes library that I use for iTunes Match (my complete library is actually much larger but I created a separate library to stay below the 25 000 songs limit).
After changing some tags in iTunes (I had some artists listed twice, once in the format "<last name>, <first name>" and once "<first name> <last name>" and wanted to harmonize this) the iCloud status of most of my songs is no longer displayed correctly. If I create a smart playlist containing all "matched" songs it finds only about 1000 songs, a playlist for "uploaded" songs contains only about 250 songs, the vast majority of my songs simply have NO iCloud status whatsoever (not even "waiting").
Trying to fix this, I selected all of my songs, option clicked and chose "Add it iCloud". After waiting some time, nothing changed. The funny thing is: iTunes match reports that 24 669 songs (the correct number) are available in iCloud.
So basically everything works and I am also able to download all of my songs on my iPhone. Still, it's a little bit annoying that the iCloud status is not displayed correctly and smart playlists filtering for iCloud status don't work. Does anybody know a way to fix this?
Thanks for any help,
Andreas

The reason why the C3850 switch stack is showing as standalone in LMS CiscoView is because
it's returning sysObjectID as standalone.
It should return as 1.3.6.1.4.1.9.1.1745 --cat38xxstack
While, if you poll it for sysObjectID, the Catalyst 3850 stack switches will be returning OID 1.3.6.1.4.1.9.1.1641.
This is an IOS bug "CSCul00003 - Incorrect Sys OID for Cat3850 Stack device".
Unless this bug is fixed, LMS will not be able to show it as stack device.
You can try to check if you can manually change the device identity to cat38xxstack from Inventory > add/edit device > edit identity.
Else we need to wait for the fix of this bug.
-Thanks
Vinod

NI USB-8473 Windows can not find Driver

After I install my CAN Software 2.6.1 and connect my USB device, Windows starts the Hardware Wizard but, can not find the Drivers for this device. I started out with 2.4 and uninstalled and reinstalled it which did not help and then I upgraded to 2.6.1. This did not seem to help either. My impression is that this is something to do with Windows or the computer, but I thought I would ask if anyone has seen this problem before in case it is a hardware or software issue.
Solved!
Go to Solution.

Hi,
Thank you for your post. The NI-CAN driver is an inf file titled nican.inf. Instead of automatically detected the driver in the Found New Hardware Wizard, try browsing to the nican.inf file. This file is found in the following directory: C:\Program Files\National Instruments\NI-CAN\staging.
If this doesn't work, I would run the Microsoft Windows cleanup utility linked below and remove all NI-CAN registries from your system and then reinstall the driver once again.
http://support.microsoft.com/kb/290301
Regards,
Todd V.
National Instruments
Applications Engineer
NI Prototyping Community

HP Photosmart 6510 series network printer will not print black after changing cartrage

HP Photosmart 6510 series network printer will not print anything that is black or has black in the picture after changing cartridge, all other colors are working properly after changing. Does not look like any damage to the cartridge or the insert where you plug in the ink. The well where the ink pad and the cartridge meet is damp with black ink. So not sure what is going on

Hello dinger57 and welcome to the HP forums!
I understand since changing the black cartridge the black ink has not been printing. I'm sorry to hear this, but I will definitely do my best to lend a hand
I will suggest that you start with following through this Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages document. If the issue persists after that can you please let me know what country you're in and whether the printer is in or out of warranty? Thanks! Please feel free to private message me the country information.
Hope to hear from you soon!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Why is my Mac Pro wireless keyboard not being found after changing batteries

Why does my Mac Pro not find the wireless keyboard after changing the batteries. I restarted the computer but it still doesn't recognize the keyboard?

Troubleshooting wireless mouse and keyboard issues
OS X: Bluetooth devices become unresponsive

HT1491 My password in iTunes will not work, even after changing it. It keeps showing a window to add PW. I do and it pops up again.

My PW in iTues will not work. Even after changing it. Window pops up and ask for PW. Over and over.

I would be worried about that - but it may turn out to be nothing.
Since you already changed your password, you're probably OK - but I recommend looking at your purchase history to see if there's any unauthorized purchases (use iTunes on your Mac or PC to go to the itunes store, then click your account in the upper-left or upper-right corner). If there are any new purchases that you didn't make, click the button to report problem (and if they happened after you reset your password, you should immediately change your password again).
I think sometimes when you change your password and verifiy your credit card info, it can "reset" the warnings - so it may actually have been you logging in to your own account that caused you to get the warning. But I'm not absolutely sure of that, so it's best to check your purchase history (and reset your password if necessary - but you already did that).
I also recommend turning on "two-step verification" (but Apple makes you wait a few days after changing your password to turn that on). With "two-step verification", Apple will send you a text message with a 4-digit code the 1st time you try to buy something from a new computer - since a hacker won't have your phone, they won't be able to continue (theoretically). After the 1st time, it goes back to mostly working normally (until the 1st time you try to purchase from another new computer, then you get another text message - so this alerts you to someone, somewhere else, trying to get into your account).

New Retina MacBook Pro does not find WiFi after booting

My Retina MacBook Pro keeps looking for WiFis after it has booted, but does not find any.
I have to explicitly turn WiFi off and on again after booting to get it working.
When I put the MacBook to sleep and wake it, the problem does not occur.
Any hints what could be the problem?

Not sure if this will help, but you can go into System Preferences > Network and, if you haven't already, create a new location (mine is called "home"), then from this location remove all connection methods from the left column except Wi-Fi. Also, click on "Advanced" and remove anything from the Preferred Networks list that you aren't using. Then click on "OK" and "Apply".

Not find driver..after change motherboard

Similar Messages

Maybe you are looking for