Not finding where to select 2G network

i m having a poor 3G network in my area so not able to make n answer calls so i want to select 2G network on my iPhone but unable to find from where i can choose between network.

I Checked in General>Cellular also but there is enable or disable LTE, no other option for choosing between network.

Similar Messages

Hi, I have elements 12, and my paint bucket wants to just use gray. I can not find where to reset t

Hi, I have elements 12, and my paint bucket wants to just use gray. I can not find where to reset the tools. Help! Thanks!

Check under Image> Mode that RGB Color is selected.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.)

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.) Do you know where I go to change the setting to allow me to "always allow" cookies?

Hi lisaarnett111,
If you are having issues turning on Always Allow for cookies in Safari on your iPad, you may want to check to make sure that you don't have Private Browsing enabled, as noted in the following article:
Turn Private Browsing on or off on your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

I had changed my Apple ID on my PC and realized iCloud. On my iphone iCloud account is on the old ID. Could not find where to change it. In Settings-iTunes

I had changed my Apple ID on my PC and realized iCloud. On my iphone iCloud account is on the old ID. Could not find where to change it. In Settings-iTunes & App Stores – I had replaced the old ID with the new one. On my iPad 2 – iCloud account is on old ID, I cannot change it,
do i have to delete iCloud accounts and re=build them ?

Yes, you got it. there is no way to change - just delete. Usually there is no loss, but photostream is reset, so make sure to back up your pictures before you do.

11.1.1.4:Could not find the item selected to match the value of type Number

Hi,
I have a taskflow with an input parameter.
The input parameter value is to be assigned to a list item as the default selected value.
I have mapped the pageFlow scope parameter to set value to the list item using input page parameters defined in task flow.
but When i Run the task flow the value does not get assigned to the drop down list and jdevloper console screen shows up the following message
"Could not find the item selected to match the value 2 by type: oracle.jbo.domain.Number in LOV."
But If I click the Lov to check the values it shows that value is present in the list.
The same configurations works if the list of values is for a column with type as java.lang.String.
Is it somethng different that is to be done for a Number field to assign value from a taskflow parameter?
Edited by: user3067156 on Jun 25, 2011 3:34 PM

Hi Jobinesh,
I am assigning the default value in the task flow using input page parameters ...
<view id="VIEW1">
<page>/title.jsff</page>
<input-page-parameter>
<from-value>#{pageFlowScope.pInputTyp_Id}</from-value>
<to-value>#{bindings.pTyp_Id1.attributeValue}</to-value>
</input-page-parameter>
</view id>
It does not assign the value, if Bind variable(pTyp_Id1) NDtype and task flow input parameter(pInputTyp) class type, both are set to use type oracle.jbo.domain.Number.
If I change both to use java.lang.String and additionally also change the VO defination the accept the bind variable of type string, it assigns the value correctly.
Usecase:
I have a a task flow for which has its first page a search page.
The Search page is created using operation execute with params and dragging the query parameters on the page.
The Query parameters are to be filled using a select one choice option and the list is bound to the master values.
This task flow can be used inside a standalone page as a region to provide a search page
The same task flow can be called from within another taskflow which will provide the default values for the drop down lists ..
Since the search page is a jsff fragment i dont have a page on load handler to provide default values..
So assiging the values using input page parameters defined in task flow view tag.
For testing I am passing the taskflow input parameters by calling the task flow from a jspx page a region . When I configure this task flow a region in a page its asks for providing the values for the parameters
And the same gets configured in my testpage def as
<executables>
<variableIterator id="variables"/>
<taskFlow id="Flow1" taskFlowId="/WEB-INF/Flow1.xml#Flow1"
activation="deferred"
xmlns="http://xmlns.oracle.com/adf/controller/binding">
<parameters>
<parameter id="pTyp_Id" value="1207"/>
</parameters>
</taskFlow>
</executables>
Edited by: user3067156 on Jun 27, 2011 1:50 PM

Can not find where I am suppose to enter the redemption code tyhat came with my new product?

Can not find where I am suppose to enter the redemption code that came with my new product?
+

Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

I downloaded the latest version of iTunes and I can not find where to put the music without any synchronization

I can not find where to put new music.
Thank you in advance.

When you connect your ipod up to the computer. It should show the device, usually with the name of the device, in my case 'jordan's ipod'. This should be on the row which shows 'songs', 'albums' e.t.c on the far right. There when you click on it it should go to a different screen showing a picture of your ipod along with two buttons - Update and Restore. Click update and it should take a 2 mins while your ipod is updated to the latest version of Ios.
After updating te ipod see if there is a change in results.
PS: make sure the device is active while syncing so keep tapping the screen.
Sorry for any incorrect info, i have an ipod touch, but i've had experience with an ipod

HT1420 I have windows 8 new pc and i can not find where i can authorize my computer...HELP me please. These directions must be an older version maybe?

I have windows 8 new pc and i can not find where i can authorize my computer...HELP me please. These directions must be an older version maybe?

Press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(82052)

HT1420 i am trying to authorize my laptop with my apple id. i have followed the instructions opern itunes store goto authorize computer but i can not find where it says "authorize computer" in itunes?

i am trying to authorize my lenovo lap top to be able to download my purchased songs from itunes.
the instructions seem simple enough open itunes store click on "authorize computer"
i can not find that instruction any where within the itunes menu

Press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(90835)

Win8 can not find and connect the wireless network which created in win7

I am a fan of DOTA, sometimes i play it with my roommate. But after i installed win8, my roommate and i can not connect to each other. He used win7 to set up a wireless network, but i could not find the network. And i used win8 to set up a
wireless network.Althrought it prompted create successfully, i could not find it in my laptop. So who can explain it to me? I really think using the networkd on right side instead of the classic network finder is a big mistake.

Hi,
As you said,the other laptop couldn't see the adhoc network.
I suggest you use the following method to re-create the adhoc network.
Firstly,please use the following command to verify that your network interface supports virtualization.
netsh wlan show drivers
If Hosted network supported says Yes, please enter the following commands to configure an ad hoc wireless connection.
netsh wlan set hostednetwork mode=allow ssid=<network name> key=<passkey>
Then,you need to start the mode to create an ad hoc connection. Please enter the command below.
netsh wlan start hostednetwork
For the detail information, refer to the following link:
http://www.addictivetips.com/windows-tips/how-to-create-wireless-ad-hoc-internet-connection-in-windows-8/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Regards,
Kelvin hsu
TechNet Community Support

Functional content library missing... can not find where to download.

Hello,
I have read all the threads on why I have no templates and styles in my encore.
I have determined that because i got the software from my network admin they probaly didn't install these folders.
It looks like i dont have them for much of mly creative suite (production premium)
Is there a place to download them?
I can not find them using my adobe login info as the software does not appear in any "purchases"
Thanks for your help.

>hoping I could get them faster from adobe then our admin
As far as I know, the person who signed in to buy the software must be the one to download all the pieces
>I can not find them using my adobe login info as the software does not appear in any "purchases"
You did not buy, so you may not download

In iPhoto you r able to pick the type of paper, i.e. glossy, semi glossy, etc. I do not find where u can do so in Apeture..when I go file and select print, there r no instructions like in iPhote.

In iPhoto you r able to select paper type for phots, i.e. glossy , semi glossy, etc. how do u do this in apeture?

When you print in Aperture, you first specify the layout of your print in Aperture's "Print" panel, then press "Print". This will open the system print dialogue, and here you can specify the device specific print settings. If you set the pop-up menu to "Print Settings", you will be able to specify the Media Type, if your printer supports different media types.
Regards
Léonie

ARD not finding any computers on local network scan

I've installed ARD 3.2.2 on a g5 xserv and when I use the scanner to scan the local network I find no computers. If I change to Bonjour, network address, or network range I can find computers. My xserv has the nics teamed through hp procurve managed switches. ARD 3.2.1 worked fine on this box when it was 10.4.11 but I'm not sure if the nics were teamed. Has anyone else found similar behavior with teamed nics or is this an ARD 3.2.2 problem?

I forgot to mention that I'm also running a different copy of ARD 3.2.2 on my macbook pro and the scanning the local network returns all the computers on our network. The xserv in question is setup to be a task server but still shows the problem without being a task server.

Usage Based Optimization Wizard not finding Queries for Selected Measure Group (2008)

I have configured my analysis services server to capture queries in an OLAP Query Log table. The connection string points to a table on a SQL Server relational database. I have verified that the dbo.OlapQueryLog table was created. I have set it to
capture every 5th query. The table has been collecting query statistics for several hours. I opened my model in BIDS, clicked on the cube and opened the Aggregations tab. I click on the measure group partition and select the Usage Based Optimization
button. The wizard opens up and I click next. In the "Specify Query Criteria" dialog, there is a warning that there "are no queries in the log for the selected measure group". The problem is that there are queries but the UBO
Wizard doesn't seem to be finding them. Do I need to set a property in the BIDS to point to the location of the query log file in the relational database?
davidg12

Hi David,
Is your SSAS database name and ID are same? We came across same kind of issue while ago. We initially created our database with one name and later renamed the database.
The database name and ID should be same in order to perform Usage Based Optimization.
To do so,
On the solution explorer the top node is the database.
Right click on that node and click edit database. In the property windown you should be able to see ID. The ID and the name of the database should be the same.
If both are not same, Change the database name to match ID.
Please mark as Answer if this helps!
Rajasekhar.

Applications do not find connection after switching (wireless) network

When I move from one network to another, programs do not recognize that the internet connection works again. This happens to Opera and Spotify running in Wine at least.
Anyone know why?
I'm using NetworkManager and nm-applet.

Hi,
sorry if i lose you ... here is the story
node 1 - 10.100.1.201
node 2 - 10.100.1.203
vip - 10.100.1.202
when both server restarted, i can remote to both servers, no problem.
1. RDP to both node 1 and 2 together on their physical IP. Connected successfully.
2. checked the Active node on node 1. Perform fail over from node 1 to 2, node 1 RDP session loss connection immediately. checked on node 2, cluster node active on node 2. no errors.
3. perform node 2 to node 1 fail over. Node 2 RDP session loss connection immediately, node 1 session came back. checked cluster node active on node 1. no errors.
4. in order to have both can continue to rdp, perform restart on node 2 (the node cannot reconnect), after reboot, rdp back to normal.
5. firewall team confirm connection has reach server, server not responding to rdp apparently.

Not finding where to select 2G network

Similar Messages

Maybe you are looking for