Not found Detail Log for QM_CONTROL in Archiving
Hi All,
We are archiving QM_CONTROL object, Created Variant with specific period with selection profile & maintain the Customization & Technical settings.after Prepossessing in job spool system is showing only the No of records selected,but not showing Detail Log below & i checked in Logs tab also in initial screen, system showing massage" No log was generated".
Kindly help me to see the detailed list of inspection lots.
Hello,
I have rarely used archiving, and just had to re-visit those transactions.
I don't think you will get detailed log in Prepossessing RQRQAB00 program.
System status in QA32 was sufficient in our case. ARBL Blocked for Archiving. May be filtering will help you.
Amol.
Similar Messages
-
Java.rmi.UnmarshalException: skeleton class not found but required for clie
Hello everyone,
I am new to RMI and getting a strange exception. I am using Java 1.5.0_07 both on client and server. They are running on the same machine, the rmi registry is started inside the server application.
I am wondering why java complains about skeletons, I thought they are automatically created when using java 5.0?
Please have a look at the stacktrace below.
Thank you for your help.
Best Regards
Patric
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
java.rmi.UnmarshalException: error unmarshalling call header; nested exception is:
java.rmi.UnmarshalException: skeleton class not found but required for client version
sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:325)
sun.rmi.transport.Transport$1.run(Transport.java:153)
java.security.AccessController.doPrivileged(Native Method)
sun.rmi.transport.Transport.serviceCall(Transport.java:149)
sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
java.lang.Thread.run(Thread.java:595)
sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:247)
sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:223)
sun.rmi.server.UnicastRef.invoke(UnicastRef.java:343)
sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
java.rmi.Naming.lookup(Naming.java:84)
org.apache.jsp.index_jsp._jspService(index_jsp.java:58)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)The full class path information that I can gather is as follows (some of the library path locations could be suspect...):
Class path: /edge/node3/hotfix::/edge/node3/current/lib/JMdsApi.jar:/edge/node3/current/lib/MemoryProfilingAgent.jar:/edge/node3/current/lib/T2common-2.6.0-SNAPSHOT.3200.jar:/edge/node3/current/lib/T2scripting-jython.jar:/edge/node3/current/lib/activation.jar:/edge/node3/current/lib/alib.jar:/edge/node3/current/lib/alibom.jar:/edge/node3/current/lib/ant.jar:/edge/node3/current/lib/authapi.jar:/edge/node3/current/lib/bbdlapi.jar:/edge/node3/current/lib/bcpg-jdk15-136.jar:/edge/node3/current/lib/bcprov-jdk15-136.jar:/edge/node3/current/lib/c3p0-0.9.1.2.jar:/edge/node3/current/lib/castor-1.1-codegen-anttask.jar:/edge/node3/current/lib/castor-1.1-codegen.jar:/edge/node3/current/lib/castor-1.1-xml.jar:/edge/node3/current/lib/castor-1.1.jar:/edge/node3/current/lib/colt-1.2.0.jar:/edge/node3/current/lib/common-annotations.jar:/edge/node3/current/lib/commons-beanutils.jar:/edge/node3/current/lib/commons-codec-1.3.jar:/edge/node3/current/lib/commons-collections-3.2.1.jar:/edge/node3/current/lib/commons-jexl-1.1.jar:/edge/node3/current/lib/commons-lang-2.3.jar:/edge/node3/current/lib/commons-logging-1.1.1.jar:/edge/node3/current/lib/commons-net-1.4.1.jar:/edge/node3/current/lib/dsn.jar:/edge/node3/current/lib/eagleapi.jar:/edge/node3/current/lib/ezmorph-1.0.3.jar:/edge/node3/current/lib/f2-loader-1.8.jar:/edge/node3/current/lib/fasttrade-boviewer-1.0.1.jar:/edge/node3/current/lib/hsqldb.jar:/edge/node3/current/lib/icu4j-3.4.4.jar:/edge/node3/current/lib/ivy.jar:/edge/node3/current/lib/janino.jar:/edge/node3/current/lib/janus-sdk-1.7.0.0.jar:/edge/node3/current/lib/jasypt-1.4.1.jar:/edge/node3/current/lib/javolution.jar:/edge/node3/current/lib/jcalendar-1.3.2.jar:/edge/node3/current/lib/jcl-over-slf4j-1.5.6.jar:/edge/node3/current/lib/jcommon-1.0.9.jar:/edge/node3/current/lib/jconn2.jar:/edge/node3/current/lib/jconn3-6.05-b26214.jar:/edge/node3/current/lib/jdom.jar:/edge/node3/current/lib/jfreechart-1.0.5.jar:/edge/node3/current/lib/jgroups-all.jar:/edge/node3/current/lib/jline.jar:/edge/node3/current/lib/jmkv123p1.jar:/edge/node3/current/lib/jna.jar:/edge/node3/current/lib/joda-time-1.5.2.jar:/edge/node3/current/lib/jscience.jar:/edge/node3/current/lib/json-lib-2.2.1-jdk15.jar:/edge/node3/current/lib/jul-to-slf4j-1.5.6.jar:/edge/node3/current/lib/junit.jar:/edge/node3/current/lib/jython.jar:/edge/node3/current/lib/log4j-1.2.15.jar:/edge/node3/current/lib/log4j-over-slf4j-1.5.6.jar:/edge/node3/current/lib/loggablePreparedStatement-1.6.jar:/edge/node3/current/lib/looks-2.1.4.jar:/edge/node3/current/lib/mailapi.jar:/edge/node3/current/lib/model-12021.jar:/edge/node3/current/lib/mysql-connector-java-5.1.7-bin.jar:/edge/node3/current/lib/opencsv-1.8.jar:/edge/node3/current/lib/rfa.jar:/edge/node3/current/lib/rspcore.jar:/edge/node3/current/lib/slf4j-api-1.5.6.jar:/edge/node3/current/lib/slf4j-log4j12-1.5.6.jar:/edge/node3/current/lib/smtp.jar:/edge/node3/current/lib/smtphandler-0.6.jar:/edge/node3/current/lib/spring-2.5.2.jar:/edge/node3/current/lib/statsvn.jar:/edge/node3/current/lib/swingx-0.9.3.jar:/edge/node3/current/lib/t2-12021.jar:/edge/node3/current/lib/testng-5.9-jdk15.jar:/edge/node3/current/lib/tibmsg.jar:/edge/node3/current/lib/tibrvj.jar:/edge/node3/current/lib/trove.jar:/edge/node3/current/lib/velocity-tools.jar:/edge/node3/current/lib/velocity.jar:/edge/node3/current/lib/xalan.jar:/edge/node3/current/lib/xerces.jar:/edge/node3/current/lib/patng/activeio-core-3.0.0-incubator.jar:/edge/node3/current/lib/patng/activemq-core-4.1.1.jar:/edge/node3/current/lib/patng/avalon-framework-4.1.3.jar:/edge/node3/current/lib/patng/backport-util-concurrent-2.2.jar:/edge/node3/current/lib/patng/binding-1.4.0.jar:/edge/node3/current/lib/patng/cglib-nodep-2.1_3.jar:/edge/node3/current/lib/patng/common-1.30.jar:/edge/node3/current/lib/patng/commons-cli-1.0.jar:/edge/node3/current/lib/patng/commons-configuration-1.2.jar:/edge/node3/current/lib/patng/commons-discovery-0.2.jar:/edge/node3/current/lib/patng/commons-math-1.1.jar:/edge/node3/current/lib/patng/concurrent-1.3.4.jar:/edge/node3/current/lib/patng/geronimo-j2ee-management_1.0_spec-1.0.jar:/edge/node3/current/lib/patng/geronimo-jms_1.1_spec-1.0.jar:/edge/node3/current/lib/patng/logkit-1.0.1.jar:/edge/node3/current/lib/patng/mina-core-1.0.1.jar:/edge/node3/current/lib/patng/mina-filter-ssl-1.0.1.jar:/edge/node3/current/lib/patng/mina-java5-1.0.1.jar:/edge/node3/current/lib/patng/mx4j-remote-3.0.1.jar:/edge/node3/current/lib/patng/mx4j-tools-3.0.1.jar:/edge/node3/current/lib/patng/org.apache.felix.framework-1.0.0.jar:/edge/node3/current/lib/patng/org.osgi.core-1.0.0.jar:/edge/node3/current/lib/patng/pat-dt-common-1.18.jar:/edge/node3/current/lib/patng/pat-sdt-1.18.jar:/edge/node3/current/lib/patng/patNg-api-1.27.1.jar:/edge/node3/current/lib/patng/patNg-server-aoc-1.21.jar:/edge/node3/current/lib/patng/patNg-server-common-1.21.jar:/edge/node3/current/lib/patng/patNg-server-session-manager-1.21.jar:/edge/node3/current/lib/patng/patNg-utils-1.27.1.jar:/edge/node3/current/lib/patng/qpid-broker-2.2.2.0.jar:/edge/node3/current/lib/patng/qpid-client-2.2.2.0.jar:/edge/node3/current/lib/patng/qpid-common-2.2.2.0.jar:/edge/node3/current/lib/patng/qpid-mina-core-2.2.2.0.jar:/edge/node3/current/lib/patng/rsee-2.11.jar:/edge/node3/current/lib/patng/servlet-api-2.3.jar:/edge/node3/current/lib/patng/silk-1.3.jar:/edge/node3/current/lib/patng/slf4j-api-1.4.0.jar:/edge/node3/current/lib/patng/slf4j-log4j12-1.4.0.jar:/edge/node3/current/lib/patng/validation-1.2.0.jar
Boot class path: /apps/jdk/1.6.0_13/linux/jre/lib/resources.jar:/apps/jdk/1.6.0_13/linux/jre/lib/rt.jar:/apps/jdk/1.6.0_13/linux/jre/lib/sunrsasign.jar:/apps/jdk/1.6.0_13/linux/jre/lib/jsse.jar:/apps/jdk/1.6.0_13/linux/jre/lib/jce.jar:/apps/jdk/1.6.0_13/linux/jre/lib/charsets.jar:/apps/jdk/1.6.0_13/linux/jre/classes:/tmp/yjp200811122006.jar
Library path: /apps/jdk/1.6.0_13/linux/jre/lib/i386/server:/apps/jdk/1.6.0_13/linux/jre/lib/i386:/apps/jdk/1.6.0_13/linux/jre/../lib/i386::/edge/node3/current/lib:/home/eqdev/eqedgeuat/yourkit_7_5_11/yjp-7.5.11/bin/linux-x86-32:/edge/node3/current/lib:/home/eqdev/eqedgeuat/yourkit_7_5_11/yjp-7.5.11/bin/linux-x86-32:/usr/java/packages/lib/i386:/lib:/usr/lib -
"CJS-30199 The CTC classes were not found after waiting for 900 seconds."
Here's the snippet of the sapinst_dev.log
I am trying to install Central Instance on a RedHat Enterprise 4 server (32bit). But stuck at
this stage.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2007-05-10 20:19:48.093 FSPath(/usr/sap/LN1/DVEBMGS02/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/com/sap/ctc/util/ConfigMainExt.class).isExisting() done: false
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2007-05-10 20:19:48.093 NWJavaInstance._waitForFile() - elapsed time = 910 timeout = 900
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.usageTypes.ctcSyncWaitTimeout:
The CTC classes were not found after waiting for 900 seconds.
ERROR 2007-05-10 20:19:48
CJSlibModule::writeError_impl()
CJS-30199 The CTC classes were not found after waiting for 900 seconds.
TRACE [iaxxejsbas.hpp:460]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2007-05-10 20:19:48 [iaxxgenimp.cpp:736]
showDialog()
FCO-00011 The step configCAF with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|15|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_CAF|ind|ind|ind|ind|1|0|configCAF was executed with status ERROR .
Your help is much appreciated.
Thanks and Regards,
Satish/Hello Satish
Please do following checklist:
1. Check that the J2EE engine is up and running (e.g. log in with Admin)
2. Check that the following application is running:
Visual Admin => Cluster => Server => Services => Deploy
Select "Application" and look for "sap.com/tclmctcutilbasic_ear
3. Try to continue installation
It could be helpful to apply the patch for CTC as per note # 938261
before restarting.
and also try to add more memory allocation.
If issue persists,
- I'd like to know which installation DVD/CD number being using ?
- The contents of the LABEL.ASC file.
- The installation guide reference and title used for this install ?
- SAPINST version ?
- Oracle version/patch level ?
- Operating system version/patch level ?
See also:
Note # 851251 - SAP NetWeaver 2004s Installation on UNIX
Thanks
Kenny -
Could not read detail log *.chk
Hi.
I planed checkdb in db13 and after ending i can't read log. In db13 i get message
"Could not read detail log cdvazznq.chk". We use oracle 10.2 on Hp-ux.
is there any idea?
regards/
DenisDenis,
Has your problem solved?
Are you still getting value as 077 even after setting the umask value to 022?
executinf command 'umask' should return 022 as output.
Setting the value of umask to 022 in .login & .profile MUST solve your problem. I wonder why you are having problems with DB13. ( We have the umask value set as 022 on all our systems, and no problems with DB13 )
Following is for your informatoin:
umask 077 - Assigns permissions so that only you have read/write access for files, and read/write/search for directories you own. All others have no access permissions to your files or directories.
umask 022 - Assigns permissions so that only you have read/write access for files, and read/write/search for directories you own. All others have read access only to your files, and read/search access to your directories.
umask 002 - Assigns permissions so that only you and members of your group have read/write access to files, and read/write/search access to directories you own. All others have read access only to your files, and read/search to your directories
Regards,
Ammey Kesarkar
<i>'Award points for useful info'</i> -
DB12 Log:: Could not read detail log aegydpas.cds
Dear Experts,
Last week i updated the BRTOOLS to 7.10 (41) in our Dev system and from that time the Redo Log Back up is getting failed.
I referred the link::
http://forums.sdn.sap.com/thread.jspa?threadID=1294155
But still my Redolog back up is getting failed.
When i try to open the detailed log using db12 it says::
Could not read detail log aegydpas.cds
Current Files Details are::
-rwxr-xr-x 1 pipadm sapsys 2096665 Aug 09 23:39 libsbt.o
-rwxr-xr-x 1 pipadm sapsys 6588322 Aug 10 01:11 brarchive
-rwsr-xr-x 1 orapip sapsys 6761531 Aug 10 01:12 brbackup
-rwsrwxr-x 1 pipadm sapsys 8672269 Aug 10 01:13 brconnect
-rwxr-xr-x 1 pipadm sapsys 7344219 Aug 10 01:14 brrecover
-rwxr-xr-x 1 pipadm sapsys 2753742 Aug 10 01:14 brrestore
-rwxr-xr-x 1 pipadm sapsys 9193124 Aug 10 01:15 brspace
-rwsrwxr-x 1 pipadm sapsys 3487223 Aug 10 01:16 brtools
-rw-rr 1 pipadm sapsys 334 Aug 10 01:16 dbatoolsora.mf
-rw-rr 1 pipadm sapsys 150 Aug 10 01:16 dbatoolsora.lst
lrwxrwxrwx 1 root system 35 Aug 20 13:29 backfm -> /usr/tivoli/tsm/tdp_r3/ora64/backfm
lrwxrwxrwx 1 root system 36 Aug 20 13:29 backint -> /usr/tivoli/tsm/tdp_r3/ora64/backint
-rw-rr 1 pipadm sapsys 1428 Sep 30 18:27 dev_sapstart
drwxr-x--- 2 pipadm sapsys 4096 Oct 04 15:19 brtool7
-rw-rr 1 pipadm sapsys 15848554 Oct 04 15:26 DBATL710O10_41-10004181.SAR
Kindly let us know how to proceed with this.
Regards,
SanjeevDo we need to run any Scripts after upgrading the BR tools???
Current::
pipadm> pwd
/oracle/PIP
pipadm> ls -ltr
total 264
drwxr-xr-x 2 orapip dba 256 Aug 02 2010 lost+found
drwxr-xr-x 4 orapip dba 256 Sep 10 2010 saptrace
drwxr-xr-x 4 orapip dba 256 Sep 10 2010 origlogA
drwxr-xr-x 4 orapip dba 256 Sep 10 2010 origlogB
drwxr-xr-x 3 orapip dba 256 Sep 10 2010 mirrlogA
drwxr-xr-x 3 orapip dba 256 Sep 10 2010 mirrlogB
drwxr-xr-x 13 orapip dba 4096 Sep 11 2010 sapdata1
drwxr-xr-x 10 orapip dba 256 Sep 11 2010 sapdata4
drwxr-xr-x 14 orapip dba 4096 Sep 11 2010 sapdata2
drwxrwxrwx 12 orapip dba 4096 Sep 11 2010 sapdata5
drwxr-xr-x 3 orapip dba 256 Sep 12 2010 sapdata8
-rw-rr 1 orapip sapsys 895 Oct 13 2010 LASVerify.pse
drwxr-xr-x 18 orapip dba 4096 Nov 09 2010 sapdata3
drwxr-xr-x 70 orapip dba 4096 Nov 10 2010 102_64
drwxr-xr-x 15 orapip dba 4096 Dec 28 2010 sapdata7
drwxr-xr-x 45 orapip dba 4096 Jan 15 2011 sapreorg
drwxr-xr-x 31 orapip dba 4096 Jan 15 2011 sapdata6
drwxr-xr-x 2 orapip dba 12288 Oct 03 21:00 sapcheck
drwxr-xr-x 2 orapip dba 24576 Oct 05 19:41 saparch
drwxr-xr-x 3 orapip dba 28672 Oct 07 12:18 oraarch
drwxr-xr-x 3 orapip dba 28672 Oct 07 15:00 sapbackuppipadm> pwd
/oracle/PIP
pipadm> -
Could not read detail log from DB12 and DB13
hi gurus,
I am unable to read detail log of onlinebackups and Redolog backups from DB12 and DB13 in my BI sytem what could be the problem.
cheers
KumarHi Saurabh,
Thanks and sorry for late reply I am on vacation, I am back today.
How can I check permission of directory for sap backup in GUI level ? Please let me know.
When I try to go through T.code DB12 -> Overview of databse backups - > Double click on todayu2019s date -> and click on Detail log I am getting a pop up with u201CCould not read detail log XXXX.anf u201D
But if I check through SM37 Job log I am able to see the log.
Please help me to solve this problem.
System details
BI System SAP NetWeaver 2004s, Kernel -> 710
DB :Oracle 10g
OS : HP UNIX
Regards
Kumar -
KEU5 – It does not found senders (emisor) for segment.
Dear Expert Sap
Please, I try to explain the following scenary :
I had created one purcharse using ME21N transaction, that it had one service and imputation on cost center (CeCo)
I had created document using ML81N and accepting.
I can lookup posting document FI and it is correct.
I can lookup posting document profit center cost
But it did not create posting on COPA. Because It did not have configuration or specified OKB9: Cost Ctr (KSTAR) assigned - > Cost element master (KOSTL).
When I am excuting this report S_ALR_87013611 - Cost Centers: Actual/Plan/Variance.
I are seing income as statistical posting under cost centres.
Cost centres cannot have 'real' income postings. It is correct.
Because Cost Ele category is equal “12” and (Cost Ele category 11 or 12) are posted AS statistical on cost centers.
Finally:
Bussines need that "posted as statistical on cost centers" => it should create on COPA.
We are thinking that we can using a cycle in KEU5 transacction.
But whem we are executing transaction KEU5 son it get this message:
– It does not found senders (emisor) for segment.
Unfortunately, I am not found one note oss.
Could you check this and recommend the best option? or could you recommend any note oss, please?
All your recomendations will be welcome.
Thanks a lot for your recomendation and help.
Best regards,
Gustavo HermozaThank you very much for your answer, Ronghua!!!
I am thinking about your recomendation about using substitucion (OKC9) to derivate the PAOBJNR as reael account assignment.
It will probably be good idea but Step(Okc9) does not derivate or move characteristics to RKE_GET_ACCTNR Function. Because we dont not know this characteristics.
We had reviwed cost line items for cost center and we are seeing that all document are Material Document and this document dont have fields to derivate characteristics.
Another alternative:
Transaction KA02 change category element.
Field change CElem Category is not possible (transaction data already exists)
Diagnosis
To ensure the consistency of existing data, you can only change object CElem Category if no transaction data exists in the change period; that is, neither plan data nor actual data has been posted.
As transaction data already exists, it is not possible to change objects in this time period.
Procedure
If you still want to change the object, select a suitable change interval by choosing "Edit -> Analysis period...".
I want to show this post it is good.
Profitability segment - ERP SD - SCN Wiki
Thanks a lot for your recomendation and help.
Best regards,
Gustavo Hermoza -
Getting error:Absence type 100 was not found in Customizing for
Hi,
I am using the Standard workfllow for leave application, and when i am creating the request i am getting the bleow error:
'Absence type 100 was not found in Customizing for 21.10.2010'
What could be the reason, i have configured the statndard setting for leave type 100 in SPRO.
Thanks,
Krish.Hi Kishore,
Please check the validity period for Absence type 100 configuration.
Also pass this Error message to your HR Functional consultant. It is the configuration issue and your FM have to take care of this issue.
Thanks. -
Detailed log for external programs is not found
Hi Guys,
I have scheduled many SAP Jobs for which the steps are external programs ( Basically Unix Scripts ).
Even though they are completing successfully, and I can see the logs like below, But it is not in detail. Both the detailed log screen we used to get in SAP, and the recent log screen in Redwood are provided here. Can you please suggest what I need to do to get the detailed logs in Redwood?
The SAP detailed Logs:
The Recent redwood logs.
BR
MadhuHey Madhu,
When you execute an exernal program that is already defined in SAP, from Redwood, it is still an SAP job for Redwood (not unix job), hence Redwood cannot obtain that details.
the best way to do this is to install a platform agent in the Unix system and schedule the script directly from Redwood instead of through SAP.
How/Where did you get the detailed log screen in SAP. Can you please provide the steps to reproduce?
What you have now:
Redwood-->SAP-->Unix
What you should have:
Redwood-->Unix.
thanks
Nanda -
Hi,
I've been trying to pinpoint why our LMS 3.2 Ciscoworks server shuts down all LMS processes on occasion.
The following is displayed repeatedly within the daemonsbackup.log
08/Nov/2009 03:17:16:265 ERROR ? ? - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
com.cisco.nm.xms.ctm.common.CTMException: URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
at com.cisco.nm.xms.ctm.client.CTMCall.establishIPC(CTMCall.java:238)
at com.cisco.nm.xms.ctm.client.CTMCall.<init>(CTMCall.java:218)
at com.cisco.nm.xms.ctm.client.CTMClientProxy.<init>(CTMClientProxy.java:64)
at com.cisco.nm.xms.ctm.client.CTMClientProxy.getProxy(CTMClientProxy.java:180)
at com.cisco.nm.xms.ogs.client.OGSServerProxy.init(OGSServerProxy.java:179)
at com.cisco.nm.xms.ogs.client.OGSServerProxy.init(OGSServerProxy.java:98)
at com.cisco.nm.xms.ogs.client.OGSServerProxy.<init>(OGSServerProxy.java:85)
at com.cisco.nm.trx.nos.server.EPMPoller.ogsVerifyService(EPMPoller.java:212)
at com.cisco.nm.trx.nos.server.EPMPoller.<init>(EPMPoller.java:144)
at com.cisco.nm.trx.nos.server.NOSServer.initializeEPMPoller(NOSServer.java:244)
at com.cisco.nm.trx.nos.server.NOSServer.<init>(NOSServer.java:107)
at com.cisco.nm.trx.nos.server.NOSServer.main(NOSServer.java:259)
08/Nov/2009 03:17:17:804 ERROR ? ? - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
08/Nov/2009 03:17:17:805 ERROR ? ? - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
08/Nov/2009 03:17:17:806 ERROR ? ? - URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
In EPMOgsAdapter:since isOGSup is not true
In EPMOgsAdapter:EPMOgsadapter is sleeping. Waiting for OGSServer to come up com.cisco.nm.xms.ctm.common.CTMException: URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!
Has anyone else experienced this and how can I stop this error from appearing.
Cheers,
SigfridThis is most likely related to CSCsx23656 which is fixed by applying the patch for CSCta56151 from http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=3.2.0&mdfid=282640771&sftType=CiscoWorks+Device+Fault+Manager+Patches&optPlat=Solaris&nodecount=2&edesignator=null&modelName=CiscoWorks+Device+Fault+Manager+3.2&treeMdfId=268439477&treeName=Network+Management&modifmdfid=&imname=&hybrid=Y&imst=N&lr=Y .
-
Node text not found in Settings for BI Content
Hi gurus,
We have installed BI_CONT 704 SPS07 in a NW 7.01 system. In SPRO tx, all nodes for "Settings for BI Content" appears with the text "Node text not found".
Could you help me, please?
Best RegardsHello,
First of all I would look in SLG1 at the log. If that isn't enough then see if you can reproduce it on a test system by running SWN_SELSEN manually.
regards
Rick Bakker
hanabi technology
PS And there you see another reason not to use obsolete programs like RSWUWLML2. -
Certain Http Server Errors not visible in logs for Azure Websites
I noticed that a lot of times (but not every time) Http Server Errors on my Azure Website (an ASP.NET MVC app) don't show up in any logs, although they are recognized by Azure. E.g. I get alerts that Http Server Error count > 5 in the last 15 minutes,
I see the error count on the Portal under Monitoring/Requests and errors however these errors are not visible in my application's own logs or in the eventlog.xml. Thus I also can't troubleshoot them.
Now I'm not totally sure (and can't find any hints about) what exactly "Http Server Errors" mean in Azure terminology but since 4xx errors are handled separately by alerts I'd guess these are 5xx errors. If indeed then I don't understand why there
are apparently errors happening that are not visible at least in the event log?Hi Zoltán Lehóczky,
For your issue ,I suggest that you could try to enable site diagnostics and application diagnostics in Azure Management Portal.
In site diagnostics ,it will logs Detailed Error Logging which logs detailed information for HTTP status codes that indicate a failure (status 400 or greater).
Then you could access the folder "/LogFiles/DetailedErrors" via Ftp to check Detailed Error Logs which provide any HTTP errors have occurred.
For more information ,I suggest that you could refer to the link below:
http://azure.microsoft.com/en-us/documentation/articles/web-sites-enable-diagnostic-log/
Best Regards,
Kevin Shen. -
Bean RFCfunctionname not found on host for XI internal scenario
Hello,
This seems to be a little bit tricky.
Full Scenario is:
1. FTP -> XI -> RFC
The RFC is connecting to XI ABAP stack!!!
Within the called function module there is some operation on the provided data.
At the end six(!) different RFCs will be called dependend on the result of the data operation.
(Currently only one is implemented on Repos. and Directory and in test! )
The RFC call goes to a sender RFC channel in XI.
So this is the second part of the full scenario
2. RFC -> XI -> SOAP.
The RFC is started from PI ABAP stack with the call function as mentioned below.
Interfaces are completely implemented. So RFCs for 1. and 2. are imported successfully to SAP PI.
First interface is running fine. File is picked up, moved to RFC receiver.
Function module starts in PI ABap stack, doing data operation and then the correct RFC is called.
CALL FUNCTION 'Z_SF_ADRESS' in background task
destination 'XIEADRVZ'
TABLES
Z_SF_ADRESSE = Z_SF_ADRESSE_RFC.
COMMIT WORK.
But the call does not reach SAP PI Integr. Server.
This is the error in SM58:
Bean Z_SF_ADRnot found on host WSC S0010, ProgId =Z_SF_ADR
= > Z_SF_ADRESS = function module for RFC call to sender channel
XIEADRVZ is the TCP IP connection in SM59 with the reg.Prog.ID calling service and host of SAP PI.
ProgID from TCP IP is correct (copied from SM59 to sender channel to avoid wrong typos)
There is no error in ST22!
There is nothing in monitoring for the interface no. 2 !
Your help is really appreciated!
Best regards
DirkHi Ashish Sinha,
ProgID from TCP IP is copied from SM59 to sender channel to avoid wrong typos.
So this is ok.
The error message says from my point of view that the RFC is not found.
Have recreated the function module and reimported under new name.
No change of error message.
Is there really nobody who had this issue before?
Regards
Dirk
No idea what has happened. After moving to SAP PI 7.1 the error was still there.
After deleting error messages (from tests in 7.1) in SM58 and generating some more tests some of the items in SM58 moved to
"stored/recorded" and remained in that staus.
After another day we were able to restart them and they were processed.
Now the error vanished into air. Any new RFC call is processed directly now.
Maybe Basis corrected something with their work during release change?
Edited by: Meinhard Dirk on Mar 24, 2011 9:26 AM
Edited by: Meinhard Dirk on Mar 24, 2011 9:31 AM -
404 Resource Not Found In UWL for Display Request in Travel Management
Hi Team,
Issue regarding Uwl in Travel Management.In Mss inbox when approver clicks on display form for travel request its throwing error like 404 resource not found.
i have check all uwl iview properties like list actions to be excluded and Xml code etc.
Regards,
Venkat.Hi Venkat
I hope you are well and many thanks for using the discussion forums .
In relation to the scenario that you have described you mentioned that:
Once a user (via the MSS Inbox) clicks on the display form for travel request you are encountering a 404 resource not found error.
Ok so the first means of analysis is to ensure the UWL Destination Service Configuration is setup and maintained accordingly. Kindly review and consult the documentation below carefully.
SAP Note: 1133821 - UWL Destination Service configuration
After ensuring the destination(s) are setup accordingly and if the issue persists kindly restart the UWL service and clear the UWL cache to see if that resolves the issue.
In the destination configuration kindly ensure there are no discrepancies or misconfigurations.
Now have you navigated to your current connector setup and viewed the status columns to see if there are any exceptions appearing?
Lastly kindly check if the URL being called (at the request page) is correct.
Kindly update me as per your findings.
Kind Regards & All The Best
Troy Cronin - Enterprise Portal Support Engineer -
Why not use Redo log for consistent read
Oracle 11.1.0.7:
This might be a stupid question.
As I understand if a select was issued at 7:00 AM and the data that select is going to read has changed at 7:10 AM even then Oracle will return the data that existed at 7:00 AM. And for this Oracle needs the data in Undo segments.
My question is since redo also has past and current information why can't redo logs be used to retreive that information? Why is undo required when redo already has all that information.user628400 wrote:
Thanks. I get that piece but isn't it the same problem with UNDO? It's written as it expires and there is no guranteee until we specifically ask oracle to gurantee the UNDO retention? I guess I am trying to understand that UNDO was created for effeciency purposes so that there is less performance overhead as compared to reading and writing from redo.And this also you said,
>
If data was changed to 100 to 200 wouldn't both the values be there in redo logs. As I understand:
1. Insert row with value 100 at 7:00 AM and commit. 100 will be writen to redo log
2. update row to 200 at 8:00 AM and commit. 200 will be written to redo log
So in essence 100 and 200 both are there in the redo logs and if select was issued at 7:00 data can be read from redo log too. Please correct me if I am understanding it incorrectly.I guess you didnt understand the explaination that I did. Its not the old data that is kept. Its the changed vector of Undo that is kept which is useful to "recover" it when its gone but not useful as such for a select statement. Whereas in an Undo block, the actual value is kept. You must remember that its still a block only which can contain data just like your normal block which may contain a table like EMP. So its not 100,200 but the change vectors of these things which is useful to recover the transaction based on their SCN numbers and would be read in that order as well. And to read the data from Undo, its quite simple for oracle to do so using an Undo block as the transaction table which holds the entry for the transaction, knows where the old data is kept in the Undo Segment. You may have seen XIDSEQ, XIDUSN, XIDSLOT in the tranaction id which are nothing but the information that where the undo data is kept. And to read it, unlke redo, undo plays a good role.
About the expiry of Undo, you must know that only INACTIVE Undo extents are marked for expiry. The Active Extents which are having an ongoing tranaction records, are never marked for it. You can come back after a lifetime and if undo is there, your old data would be kept safe by oracle since its useful for the multiversioning. Undo Retention is to keep the old data after commit, something which you need not to do if you are on 11g and using Total Recall feature!
HTH
Aman....
Maybe you are looking for
-
IPhone will not come out of Recovery Mode. At. All.
Hi, my 1 year old iPhone has gone into Recovery Mode after a failed restore and im at my wits end. I get error message, after error message. I have windows xp so its a lot harder to use all the downloads that are available. I havent jailbroken my iPh
-
Error While Generating Absence Quotas
Hi HR Gurus I have facing a problem while generating absence quotas, It show message " E 81000001 No validity interval for key 1 81 01 E 81000001 You have not selected any generation rules E 81000002 No validity interval for k
-
The camera is greyed out in the messages app, next to the typing window. When I try to send a picture message from selecting the pic from my photos, I get a message saying "MMS Messaging needs to be enabled to send this message."
-
New Yoga 2 11 - Installed SSD but can't get Windows 8.1 to load
I just bought the base model Yoga 2 with a traditional hard drive. I have a brand new Samsung 830 256GB SSD drive that I wanted to install. I read on Lenovo's support site that Lenovo no longer offers recovery disks, since this laptop doesn't have
-
BizTalk FlatFile schema with header/Multiple Body/Trailer
Hi, Can you please help to create a flat file schema for the below structure.? I have a flat file with Header , multiple Body, Trailer. I am receiving XML as input and generate output as FlatFile. My FlatFile looks like below, from Batch Header to Ba