Not getting all records in reports

Hi ,
I'm using reports 6 version
and i have a report and in that in the trailer section i have a repeating frame which should written 46 records. but in the out put it showing me only 31 records remainin records are not appearing. i guess that page can display only 31 records but its not going to next page and displaying the remaining records.
if any one can help me pls do.
thanks in advance

This is the Forms forum.
Please post you question in the [url http://forums.oracle.com/forums/forum.jspa?forumID=84]Reports Form I'm sure the guys over there can help you more.
Regards
Tony

Similar Messages

Not getting all records in pagination

I am also have a problem getting all records in the report as the post on Apr. 21,2004. My reports pagination stops at 500. When I set the 'max row count' to 100000. The pagination at the bottom of my page disapears. When I leave 'max row count' empty, it only goes from 1-500. No way to view records past the 500th record.
I see there was a post on Apr. 21, 2004 about the same thing but it did not specify a fix or work around or if I'm missing a setting. (also tried the log off/on but did not help).
*My pagination Scheme is 'Row Ranges 1-15 16-30 in select list(wiht pagination)'
*My report has 1000+ records.
Thanks, Paula

The actual number of rows supported by the select list depends on how many rows you show on each page. If you go with the default of 15 rows, you would be able to use the select list with close to 5000 rows. If you increase the number of rows per page, the select list will work with even more rows.
If the select list can't be used, it may make sense to consider using the "row ranges with set pagination" style. Set pagination lets you navigate from one set to the next instead of one page to the next, so you can navigate through your result set a lot quicker.
However the best option for reports with that many rows would be "row ranges x-y", without showing the total number of rows. The reason is that the report renders a lot faster if you don't have the total number of rows calculated. In order to better be able to find certain records, I would recommend a search field on your report page that lets you filter the result set.
Hope this helps,
Marc

In full update not getting all records

Dear BW Masters,
I am working with MM module. Iam using standard extract structure 2LIS_02_ACC
Iam doing full update. Getting full data 1300 records in to PSA. But getting only 298 in to my ODS. I tried changing fields in to KEY FIELDS AND IN TO DATA FIELDS in my ODS
But could not get data.
Pls help me..i have dead line before that i need to complete report on the same.
Its happening with the other HDR and ITM extractors.
PLs help me..

Hi
Please post the query in relavent forum. (BI)
You have posted in MM forum for BW help.
Regards
Ramakrishna

Full update not getting all records from PSA to ODS

Dear BW Masters,
I am working with MM module. Iam using standard extract structure 2LIS_02_ACC
Iam doing full update. Getting full data 1300 records in to PSA. But getting only 298 in to my ODS. I tried changing fields in to KEY FIELDS AND IN TO DATA FIELDS in my ODS
But could not get data.
Pls help me..i have dead line before that i need to complete report on the same.
Its happening with the other HDR and ITM extractors.
PLs help me..

Hello,
Look at this example:
R/3 Record:
CustNo | Name | Order | Amount
1234 | Customer1 | Order 1 | 100
1235 | Customer2 | Order 2 | 200
1234 | Customer1 | Order 3 | 300
If Cust.No is Keyfield, In BW you will get 2 records
1234
1235
If Order No is Key field, you will get 3 records.
It is not necessary to get the same no of records as they are in R/3.

CUBE Not getting All records from DSO

Hi Experts ,
We have a situation where we have to load data from a DSO to a Cube . The DSO contains only 9 records and while we r loading the data into cube , the cube is only getting 2 records . Thus 7 records are missing. Also The Cube contains more Fields than DSO. in the transformations , for the extra fields we have written end routine and those extra fields will get data by reading master data .. Any pointers how to get the missing records or what is the error ...
Sam

Why multiple threads ????

Delta package not fetching all records from Delta queue in r/3

Hello,
I have loaded Goods Movement Data using 2LIS_03_BF datasource into my BI system.
The Delta has been initialized and everyday the delta is being moved from r/3.
I observed that when I execute my delta package not all delta records are fetched into PSA from r/3.
For Ex: Before starting my delta package I checked in SMQ1 of my R/3 system and see that there are around 1000 records.On executing the delta package I see that the record count is reduced from 1000 to 400 in SMQ1.On executing the delta package again I get the remaining 400 records into my PSA.
Shouldn't the delta package get all records from the queue on single execution??
Is there some setting to define the nr of records to be loaded?
I'm confused with this behaviour.Please help me understand this behaviour.
Thank You.

Hello,
First thing: the data is not transferred from the SMQ1 queue, rather the data is transfered to BW from the RSA7 Delta queue. You need to check the number of records present in the RSA7 queue.
Since SMQ1 is involved, i think you are using the unserialized V3 update method. In this method, when data is first written to the application tables, it is first transferred to the SMQ1 update queue,then via a job to the LBWQ extractor queue and then to the RSA7 delta queue. So the number of entries that you see in the SMQ1 queue are not the number of entries that have to be transferred to BW but rather the records that are waiting to be transferred to the extractor queue in LBWQ. Similarly, in LBWQ, the number of entries displayed here are not the no of entries that are going to be transferred to BW, they are the no of entries that will be transferred to the delta queue RSA7 when the next v3 update job runs.
If you want to check the number of records that will be transferred to BW, select the datasource in rsa7 and then click on the display data entries button.
Hope this helps.
Regards.

Mail not getting all messages from server and other strange behavior

Hello All,
Mail has been doing some odd things for me of late (at least the last week) and I'm lost for a solution to my problem. As far as I can tell, perhaps my Prefs. have become corrupted, or at least something in relation to Mail has become corrupted. Perhaps someone has a solution to this issue before I have to back it all up and NUKE the whole **** app to get back up and running properly.
The main issue I appear to be having is that Mail is not getting all of my Mail messages from my server. I can log into my web-mail interface provided by my domain host and can see there that there are many e-mails that don't appear to be coming down the pipe to the Mail.app client. I'm getting some e-mail's but not all....
*Here are all the things that I've checked:*
• The missing e-mails are not being picked up as Junk and are not in the Junk folder
• I have done a search within Mail for the missing e-mail's and nothing turns up anywhere.
• I have checked on the server end that I'm not maxing out my InBox or that there are any other service issues from my domain host provider.
• I have been into Prefs and checked my account settings - most (see below) of which appear to be as normal and are fine.
*Here are the weird things that I've noticed:*
• When I went into the Prefs. for the account in question, I noticed that my login had changed. For example - it usually it is "[email protected]", however it had seemed to have changed to just "johndoe" - I know this wasn't me as my domain host will not allow me to access any mail unless the login is the full mail address.
• In RULES, every rule I double click to check on seems mostly fine, apart from the fact that every "Account is:" the pull down menu just appears as blank. Usually it says "Account is: ([email protected])"
It's there last 2 items that make me think something is corrupted - so I guess my question is, what pref or file has corrupted and how can I fix it without having to give Mail.app a digital enema?
Any assistance would be most helpful - missing some but not all your incoming e-mail messages is quite annoying, as you can guess...!
Thanks,
Boz

Hello Boz.
This appears to be a rules issue. Mail is almost certainly downloading those messages, but they’re probably being processed by your rules in an unexpected way — given the information you’ve provided, maybe because there is something wrong with the file where the account settings are stored.
Do you have any Mail plug-ins? In the Finder, go to each of the following folders (if they exist). What do you see there?
/Library/InputManagers/
/Library/Mail/Bundles/
~/Library/InputManagers/
~/Library/Mail/Bundles/
To make accurately reporting this information easier, you may open /Applications/Utilities/Terminal, type the following command (you can just copy it here and paste it in Terminal), and press <Return>. You can then copy the output of that command from Terminal and paste it in your reply to this post:
ls -1 /Library/InputManagers /Library/Mail/Bundles ~/Library/InputManagers ~/Library/Mail/Bundles
<hr>
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all the filesystem issues, if any, and ensuring that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), try this:
1. Write down your Mail > Preferences > Accounts settings or take screen shots of them.
2. If you have a .Mac account and .Mac synchronization of Mail data is enabled either in Mail > Preferences > General or in System Preferences > .Mac, disable it before proceeding.
3. Quit Mail.
4. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong while trying to solve the problem. You can do this in the Finder by dragging the Mail folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is locally stored.
5. In the Finder, go to ~/Library/Preferences/. Locate com.apple.mail.plist and move it to the Desktop (to be deleted if this solves the problem). If you have a backup of your data that includes a working copy of this file, you may try restoring it from the backup to avoid steps 6-8.
6. Open Mail. You’ll have to set up your non-.Mac accounts from scratch all over again. If given the option to import existing mailboxes or something like that, don’t. Just enter the account information and Mail will automagically rediscover the data in ~/Library/Mail/ when done.
7. You’ll have to re-configure some of your Mail > Preferences settings. For spam-related security reasons, the first thing you should do is go to Preferences > Viewing and disable Display remote images in HTML messages if it’s enabled.
8. As a side effect of re-creating com.apple.mail.plist, Mail might rename Outbox (which is where messages waiting to be sent are stored) to Delivered. The name of that mailbox is actually a misnomer, as it would contain messages (if any) that couldn’t be delivered for some reason. You can delete that mailbox if you wish.
9. If the problem is fixed now and .Mac synchronization of Mail data was enabled at the beginning, enable it again, go to System Preferences > .Mac > Advanced, click Reset Sync Data, and choose the appropriate options to reset the Mail data stored on the .Mac server with the data locally stored on the computer, i.e. sync data must flow from the computer to the .Mac server.
<hr>
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

Info Cube not getting full records

Hi All,
I am extracting data from the flat file (60k records..of which most fields have binary values),, am getting the values into data source..but when loading from data source to info cube am not getting total records..
the load is successful and it is showing as transferred 60k records and added 510 records in the manage tab of the info cube.
what would be the problem ....any help is appreciated.

Hi,
Data with same combination for characterstic is added and only for unique charactersitc value it will give new record.
Material---Customer-Price
10002----- C1--
20
10002----- C1--
20
10002----- C1--
20
10002----- C2--
20
SO As you can see in flat file 4 records are there but in inofcube it will be only 2
Data with same combination of charactersitc is added and with unique combo only it will display.
Hope it clears you.
Also in addition please check the data in flat file.
Regards,
AL

How get all record from master and matching record from detail

hi master
sir i have master detail table
i have many record in master table but some record in detail table how i get
all record from master and matching record from detail
such as
select m.accid,m.title,d.dr,d.cr from master m, detail d where m.accid=d.accid
this query not work that get only related record i need all record from master
please give me idea
thanking you
aamir

hi master
sir i have master detail table
i have many record in master table but some record in
detail table how i get
all record from master and matching record from
detail
such as
select m.accid,m.title,d.dr,d.cr from master m,
detail d where m.accid=d.accid
this query not work that get only related record i
need all record from master
please give me idea
thanking you
aamir
select m.accid,m.title,d.dr,d.cr
from master m, detail d
where m.accid=d.accid (+)The outer join operator (+) will get you all the details from master and any details from the detail if they exist, but the master details will still be got even if there are not details.
Note: Oracle 10g now supports ANSI standard outer joins as in:
select m.accid,m.title,d.dr,d.cr
from master m LEFT OUTER JOIN detail d on m.accid=d.accid

Query not displaying all records when execute it first tme

Hello,
i have an issue with the WEBI report.when i run the report first time it's displaying only few records, but when i run the same report second time it's displaying the more records and it's correct.
Could any one tell me why it's not displaying all records when i execute first time.
Thanks in advance for your help.
Regards,
Prathap

Which BOBJ version do you use?
Which kind of data source are you retrieving data from?
Regards,
Stratos

Personnel Admin AdHoc Query not retrieving all records

Hi, I recently added a custom info type to a copy of the SAP ad hoc query for Personnel Admin by using the menu path in SQ02>Edit>Change Infotype selection . The query is picking up the new info type and runs fine but does not retrieve all records from the table for a given personnel id. It only retrieves 1 record per id.
Has anyone dealt with this before and have an easy/quick fix for this?

Have other users try the query, preferably a user with end user authorization.
I've had this issue before, I'm an IT person and I customized a Standard infoset.
During testing, I'm only getting 1 (in my case) Insurance record per employee.
The end user can see multiple record per employee.
Btw, did you customize a Global or a Standard Infoset?
Regards,
Olekan

Just downloaded book but did not get all the way down now cant play it any answers

just downloaded book but did not get all the way down now cant play it any answers

in iTunes, access your purchase history via your account in the iTunes store, find the file in question, and click on the report a problem button. report the problem. more info in this support article.
clicking here should take you directly to your iTunes store log-in window.

Unable to getting all records

hi
i am new to bo 4.1 and i am having source system (orcial)
in sours level i have a table in 6 lake record.when i use same table in webi i am unable to getting all record.i don't have any filters in report and object level.my table contain all dimensions only
i changed in universe level no of records display and report level as well..
s.s(6 lakes) = target report level( 6 lakes)?
i am using sap bo 4.1 version
pls do need ul help

Hi Sandeep Mishra,
thanks for your response, actually its executing successfully,but when i am set no of display records for example-5000 to 10000 ...it showing in report level..but when i want all record around 6 lakhs records..it taking time but out put showing empty..
see the below my objects
i need all objects at a time....this objects have table in source level 6 lakh ..i want same records in report level like 6 lakhs..
i changed query properties in display of no of records as well as univer level..
let me know in case of any clarty..
thanks

Why the 2LIS_08TRTK extractor can not get all data

Hello, BW Gurus.
Why the 2LIS_08TRTK and 2LIS_08TRTLP extractors can not get all data. I had used the RSA3 and get 10 registers, when a check at the VTTK table I had 20 registers, I didnt use filters at RSA3, could you help to know what happen o correct it.

Is it because
<i>
Shipment documents and their dependent objects (shipment stages as well as shipment items [deliveries in the shipment]) are only extracted into BW when the Shipment completion status has been set.
This is necessary because the numeric values that result from the delivery documents are only established at the time. If the data were already stored earlier in BW, the shipment data would not be updated if the delivery notes were changed in BW.
</i>
- from oss note 573470.

Not getting all required samples

Hi, I'm new to Labview and don't understand why I'm not getting all the samples I ask for.
I have a USB-6212-BNC module collecting data from 2 analog voltage inputs. I'm using ai0 for the analog trigger, using basically the same VI found as an example here: https://decibel.ni.com/content/docs/DOC-11764
The problem is that I am not getting all the samples needed. As you can see in the example below I only got ~1000 samples when asking for 2000.
Attachments:
Sample Issue.png ‏23 KB
Sample Issue.vi ‏30 KB

Hi bigdoug,
the output of the graph is what you get from the (missing) subVI calculation.
The DAQmxRead is configured to read 2000 samples and it surely does so as you would get a DAQmx error message instead...
Please check your subVI or attach it here with some meaningful default data!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Not getting all records in reports

Similar Messages

Maybe you are looking for