Not getting all the artist from a compilation to "artists" in my iPod
I have some compilation cds and when i import them they all (individually) get listed in artist, i ctrl marked the songs and changed it to "various artists" Is it some way of tagging the song so the "real" artist comes up when i play the song?
should i add it to every song name or is it any easier way?
When you changed the Artist field to *Various Artists*, you deleted the real artist name so there's othing to show up except Various Artists.
You should have put *Various Artists* in the *Album Artist* field and left the original artist in the Artist field.
Similar Messages
-
Cube not getting all the data from DSO
Hi experts ,
I have a scenario where i have 256 records in the DSO . I am loading the DSO data into Cube .but the cube is getting loaded with 200 records . Can any body help me in this regard ???
SamirHi samir,
This might be usual because the records in the cube get aggregated. so u will not add records in the cube but data will be updated correctly. -
How do I get all the songs from an album to show in the album view? Currently, if an album lists the artist plus a guest artist, those are shown separately and appear to be two different albums on my iPod. How do I get all the songs on that album together on my iPod? If the album is a collaboration wtih many artists, each sond may appear as a separate album.
I used to have this problem.
First, you need to go back on iTunes
you need to go to each of the songs that are having this problem
Click the album so all the songs drop down
Right click the songs that have this problem
Click ' Get info '
Click the tab that says " info '
The box that says ' album artist ' should probably be empty (correct me if I'm wrong)
Click it and type the artist of the entire album, NOT the songs guest artist
as such,
ARTIST
JAY-Z Feat. Justin Timberlake
ALBUM ARTIST
JAY-Z
These should be separate for each artist
If you write the same album artists for each song by that artist, all the songs should be on 1 album -
my iphone has been water damaged and in the mean time ive gone back to using my old phone. But i need to get all the contacts from my iphone i had synced to my laptop, but i don't know where to find them and im not sure if ive backed them up to anything!
If your contacts are synced to your computer then they are in the supported app you are syncing with.
When you set up syncing of contacts on your device, which application did you select? -
How do i get all the songs from 1 album to appear as 1 album instead of 3 albums because 2 of the songs feature guest artists in my itunes library?
Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2 -
Not all of my photos on my iphone are showing up on the stream on my computer. How do I get all the photos from my iphone onto my photo stream on my PC?
Use a third-party utility such as Phone to Mac - Pod to Mac.
-
How do I put all the songs from a compilation album into the same /album/folder in Itunes v12
How do I put all the songs from a compilation album into the same /album/folder in Itunes v12 i know in other versions it was via get info but as all of the tunes have the same album title , I am not sure what tio change to achieve this ?
I don't see your screenshot but I assume you're starting with something like this, i.e., the compilation split into multiple albums:
If you select all the items that you want to be in a single album, right-click > Get Info you'll see this:
As you say, in iTunes 12 you don't see a field to enter a distinct Album Artist value. You can, however, address this by clicking the Add Field button and selecting Album Artist:
That makes the field available in the metadata dialog so that you can enter the required value:
You can also show the pre-iTunes 12 version of the dialog by holding the SHIFT key when selecting Get Info - this allows you to enter the Album Artist directly: -
How can I get all the stuff from my old iPad 2 to my new iPad 2? I have an apple id and have synced and backed up my old iPad 2 regularly.
Sky is right you can restore the old backup and it will not affect the old iPad
To make sure do this:
1. If you have the old one then just turn off wi-fi and the iPad (that's just for your peace of mind)
2. Put new iPad on airplane mode (just for no interruptions )
3. Connect it (while it's on, don't shut it down)
4. Follow prompts and when it asks if you want to setup as new or restore CHOOSE: RESTORE
5. It will make its magic (just wait for it to sync, restarts, and finishes) it might ask you to update software if it does just accept
6. You can rename your new iPad like that you can have a fresh back up
7. ENJOY your new iPad
----------OR-----------
1. Do the above steps 1, 2, 3.
2. On step 4 you can choose to set up as new
3. Then you can choose what to sync on it (click on iPad on the left panel then the tabs on top you choose what you want on it (you can also do that if you restore)
4. Follow steps 5, 6, 7.
****If you don't have your old iPad you can remove it from your account ****
****Also when they sync it to a new computer it will setup as new unless they had an old one then they will restore it their old one****
****if you have it connected with your MobileMe or iCloud and you have the find my _____ you can also wipe it as soon as it comes online****
LET ME KNOW IF YOU HAVE ANY QUESTIONS OR CONCERNS
AGAIN ENJOY YOUR NEW IPAD!!! -
HT1351 My ipod Classic is not showing all the music from iCloud.
My ipod Classic is not showing all the music from iCloud. I have "show music" enabled.
Glad 7.7.1 worked for you, I updated itunes on my macbook, and every time i try to sync the music to my ipod classic, it goes for 23 songs and then it freezes and I get "Cannot read or write to this disk", and it ejects it. I tried uninstalling itunes, reinstalling an earlier version (7.6.2) same problem, plus a new issue with itunes. (It was a clean uninstall, btw, I got everything cleaned out, I think, lol). Video's transfer fine. And no good way to get ahold of apple. That's great. If I have no music on my ipod, it's useless. Think they'll give me my money back? (lol)
-
I updated my 4S iPhone and now I am getting all the texts from another iPhone on my plan. What do I need to do?
I'm not completely clear on the GSM / LTE network frequencies in US vs Argentina, but I do know that cross-compatibility can be an issue when buying from one country and using in another. Apple products in particular have this problem. What this sounds like to me is that the phone is not compatible with Argentinian networks; or your friend had an AT&T phone and jail-broke it. This is against the end user licensing agreement, and when the phone is next updated is likely to jam the phone.
Sorry but you lost your money.
Wasted* -
Get all the objects from an application
Hi
Does anybody know how to get all the expression from an application via ABAP?
Thanks !Try this:
* Get the BRFplus factory and query.
lo_factory = cl_fdt_factory=>get_instance( ).
lo_query = lo_factory->get_query( ).
* Get Application id.
lo_query->get_ids(
EXPORTING
iv_name = p_appln
iv_object_type = if_fdt_constants=>gc_object_type_application
IMPORTING
ets_object_id = lt_id_application ).
READ TABLE lt_id_application INTO lv_id_application
INDEX 1.
* Build selection.
ls_selection-queryfield = if_fdt_admin_data_query=>gc_fn_application_id.
ls_selection-sign = 'I'.
ls_selection-option = 'EQ'.
ls_selection-low = lv_id_application.
INSERT ls_selection INTO TABLE lt_selection.
ls_selection-queryfield = if_fdt_admin_data_query=>gc_fn_object_type.
ls_selection-sign = 'I'.
ls_selection-option = 'EQ'.
ls_selection-low = if_fdt_constants=>gc_object_type_expression.
INSERT ls_selection INTO TABLE lt_selection.
ls_object_category_sel-customizing_objects = abap_true.
ls_object_category_sel-masterdata_objects = abap_true.
ls_object_category_sel-system_objects = abap_true.
* Perform selection.
lo_query->select_data(
EXPORTING
its_selection = lt_selection
is_object_category_sel = ls_object_category_sel
IMPORTING
eta_data = lt_id_expression ).
* Process the Expressions.
LOOP AT lt_id_expression INTO lv_id_expression.
* Get Expression object.
lo_expression = lo_factory->get_expression( lv_id_expression ).
* Check Expression is not deleted or obsolete.
lo_expression->if_fdt_admin_data~get_change_info(
IMPORTING
ev_deleted = lv_flg_deleted
ev_marked_for_delete = lv_flg_marked_for_delete
ev_obsolete = lv_flg_obsolete ).
IF lv_flg_deleted EQ abap_true OR
lv_flg_marked_for_delete EQ abap_true OR
lv_flg_obsolete EQ abap_true.
CONTINUE.
ENDIF.
* Process the Expression.
lv_name_expression = lo_expression->if_fdt_admin_data~get_name( ).
WRITE: / lv_id_expression, lv_name_expression.
ENDLOOP.
Regards,
Grogan -
Get all the values from a multiple select in a multipart form
Hi there!
I am using a form with enctype="multipart/form-data" in order to upload files from the form.
I have read this page: http://commons.apache.org/fileupload/using.html and everything works well for my form.
The only problem is that I can't get all the values from a "multiple select" html object. I get only one value.
Using servlets I have used this method:
public java.lang.String[] getParameterValues(java.lang.String name) But now I have enctype="multipart/form-data" in my form and I can't use this way...
Is there a way to get all the values of a multi-valued parameter?
Thanks a lot!
StefanoHi
I have got solution for this problem so, I am listing here logic
assume tag name of html
<select name="moption" multiple="multiple">
iterate it in as
String moption="";
boolean cnt=true;
while(itr.hasNext())
FileItem fi=(FileItem)itr.next();
if(fi.isFormField())
if(fi.getFieldName().equals("moption"))
if(cnt==true)
moption=fi.getString();
cnt=false;
else
moption=moption+","+fi.getString();
If wants more help then mail me your problem
at [email protected]
Thanks!
Anand Shankar
Edited by: AnandShankar on 6 Nov, 2009 12:54 PM -
How to get all the values from the dropdown menu
How to get all the values from the dropdown menu
I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
How do I get number of item is selection dropdown?
How do I extract a ?name? for each value, one by one?
How do I change a selection by referring to particular index of the item in a dropdown menu?
Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
Message was edited by: testtestThe findElement method allows various attributes to be used to search. Take the following two examples for the element below:
<Select Name=ProdType ID=testProd>
</Select>
I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
If I want to search by id I could do the following:
Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
You can use the FindElement to grab links, text boxes, etc.
The next example grabs from a link on a page
Home
Set x = RSWApp.om.FindElement("Home","A","innerText")
I hope this helps clear it up. -
Getting all the values from a JList
Hi,
I want to get all the values from a JList and store it into an array. Any method is available to perform this task? Pls help me out with this task.Use getModel() on the list to get the ListModel and then call getSize() and getElementAt(int) to loop over the elements
HTH
Mike -
When creating a book in iphoto, how can I get all the photos from the album I want to use to show up in the order that they are in the album? When I tried to use the option to add my own photos instead of having the program "flow" them, they showed up all mixed up.
iPhoto puts them in the book in chronological order. So to get your photos from an album into an iPhoto book in the same order you will need to use the Photos ➙ Batch Change ➙ Date menu option and set them all to the same date with a 1 minute time difference between each.
OT -
Hi I newly started using Iphone 6, I am not getting all the applications list under Use Cellular date for to restrict my unwanted apps on cellular data
Please help me outHi Rajesh778484,
Welcome to the Apple Support Communities!
I understand that some of your applications are not appearing under Settings > Cellular on your iPhone so that you can restrict or allow use of cellular data. If you have some installed applications on your iPhone that are not showing here, the first troubleshooting step I would suggest would be to reset your iPhone. Please refer to the attached article for information on how to perform a reset.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe
Maybe you are looking for
-
Mac Pro with Wake on Demand enabled wakes up but never goes to sleep again
Hey, i was using Wake on Lan since OS 10.5 Leopard for waking my Mac up with a Magic Packet. Since 10.6 this brilliant feature was removed and replaced by "wake on demand" wich lets your computer wake up every 2 hours for a few seconds (very ultra an
-
I was watching a recorded show this morning on my QIP6416 DVR. The show froze while watching. I could not hit stop, exit, or anything else to get out of the frozen dvr playback. The only thing that would work was hitting power on the STB. It turn
-
There is one thing and one thing only at all ever so much that makes me angry about apple...once they come out with something new, the past product becomes almost a ghost, as if we all can just get up and go out with 2000 dollars to buy a new compute
-
Trouble with scrolling credits
I am creating a long list of scrolling credits (actually, staff members of a school and their accomplishments and so on at the end of a video). OK, so the FCPX scrolling credits has a title that's centered, and the text below it that's left justified
-
How do I keep the settings from Word in Office X to Word 2008 for my MacBookPro? The newer software is not opening files exactly the same. Thanks, BF (I can't figure out how to ask a Word discussion site this question. Do they have one? Is it easy to