Not getting any item while doing shipment costing VI01.

I have a shipment which is completely confirmed. When I am trying to do shipment costing, VI01, no item line appears. The error log is not informative.
The same vehicle, with the same service agent, has been used for many other shipments, before and after the one I have mentioned. In those cases there was no problem with the shipment costing.
Can anyone let me know what may be the possible reason for this ?
Regards.
Manish kumar Sharma

Hi Manish,
i hope the Shipment Cost Relevance and Default for Shipment Cost Type is assigned properly, and while using VI01. the same s being used.
Also check  "Maintain Transport relevence in Shipments.and "Route determination for shipping point" for the vehicle / transporter used .
BT
Satish

Similar Messages

  • Not getting any line item, while doing shipment costing VI01.

    I have a TD shipment which is completely confirmed. When I am trying to do shipment costing, VI01, no item line appears. The error log is not informative.
    The same vehicle, with the same service agent, has been used for many other shipments, before and after the one I have mentioned. In those cases there was no problem with the shipment costing.
    Can anyone let me know what may be the possible reason for this ?
    Regards.
    Manish kumar Sharma

    Hi Manish,
    i hope the Shipment Cost Relevance and Default for Shipment Cost Type is assigned properly, and while using VI01. the same s being used.
    Also check  "Maintain Transport relevence in Shipments.and "Route determination for shipping point" for the vehicle / transporter used .
    BT
    Satish

  • Any UserExit while Posting Shipment cost?

    Dear All,
    SD transportation/shipment cost integration with MM-Account Payable.
    Process:
    1. VA01 - create sales order
    2. VL01n - create Delivery
    3. VL02n - PGI
    4. VT01n - create Shipment
    5. VI01 - create shipment cost doc.
    Here  PO will get generated automatically. For that PO, a service entry sheet is created for every L.R no given by Transport vendor. Then MIRO is posted for the service entry sheet.Payment is done against that.
    But my client's requirement is that normally transporter will have contract with the company.  Transporters supply to various Customer place and raises the bill for every L.R no.
    In case of Transporteru2019s freight bills settlement, vendor invoice posting should be L.R no wise which is captured in Shipment
    L.R no wise tracking is required for Transporteru2019s payment.
    I understand that there is no SAP STD integration of LR number of shipment doc with vendor Incoming Invoice posting. But Vendor invoice can be posted for multiple POs.
    When shipment document is created, the system will generate PO automatically in the background. L.R number is to be captured and should be passed on to PO doc through USER EXIT.
    Hence I request you to  kindly reply USER EXIT available for Shipment doc. so that the customization (development) can be done in transporteru2019s (vendor) payment L.R No. wise.
    Please reply your view in this regard.
    Regards,
    Anbu

    Hi,
    Exit Name           Description VI01
    V54B0001            Shipment costing: Configure pricing
    V54B0003            Shipment Costs Calculation: Determine Rate Type and Currency
    V54B0004            Shipment Cost Calculation: Determine Status
    V54C0001            Shipment costing: Description(s) shipement cost item(s)
    V54C0002            Shipment costing: Create shipment cost sub-items
    V54C0003            Shipment Costs Processing: Determine Invoicing Party
    V54C0004            Shipment Costs Processing: Determine Loc. for Tax Invoice
    V54D0001            Shipment Costing: Determining the Tax Countries
    V54KSFRC            Determining the factors for apportionment of shipment costs
    V54P0001            Extended Function Codes for Shipment Cost Information
    V54U0001            Shipment cost processing: Check whether changes made
    V54U0002            Check shipment costs for completion
    V54U0003            Specification of shipment cost number
    V54U0004            Formatting for update of new objects (shipment costs)
    V54U0005            Updating new objects in shipment cost processing
    V54U0006            Shipment Purchase Order - Header Data Supply
    V54U0007            Shipment Purchase Order - Item Data Supply

  • I can not get any sound while playing Flash content in IE, FireFox, or Chrome

    I have Windows 7, 64 bit.  I have ie 8, I think it is 32 bit, ("About ie" does not indicate 64bit).  
    I have unistalled Adobe Flash and re-installed, I have verified that I have the REG files under System32/ and SysWOW64/ (or whatever)...
    I installed Chrome after I have having this problem.  I have plugged my speakers into both the AudioJack in the back of machine, as well as in the headphone Jack.  I have tried just using headphones...
    I have gone to the 'configuration site' I have deleted Windows temporary files, I have deleted i.e. and FireFox files.
    I have checked multimedia setting in ie advanced tabs. 
    I have checked the sound volume in the 'Mixer'
    Sound works in my broser for Quicktime applications (like video on apples website).  Sound works everywhere else...playing music, Windows startup, speaker test, etc...
    I have worked on this for hours!!!  Please help.
    Thanks!
    -Bob

    Below are the Steps from:
    http://www.codecguide.com/fix_for_flash_sound_problems.htm
    And my results:
    Flash stores its files in a temporary files folder. A corrupt download can cause the sound problems.
    Delete the following folders:
    C:\Documents and Settings\%UserName%\Application Data\Adobe\Flash Player
    C:\Documents and Settings\%UserName%\Application Data\Macromedia\Flash Player
    Actually…Note that point 1 sould be %APPDATA%\Adobe\Flash Player%APPDATA%\Macromedia\Flash Player
    (Thanks willener)
    I completed this – No help
    Empty your temporary internet files.
    Internet Explorer: Tools -> Internet Options
    Firefox: Tools -> Clear Private Data
    Opera: Tools -> Delete Private Data
    I completed this – No help
    Empty your temporary files folder.
    Use this command to empty your temporary files folder:
    Start -> Run -> RMDIR /S /Q "%TEMP%"
    I completed this – No help
    Install the latest version of the Flash plugin. You can download it HERE. If you have problems upgrading the plugin, then uninstall your existing version first with this tool. Close your browser(s) before you run the uninstall tool.
    I completed this – No help
    Run the K-Lite Codec Tweak Tool. Near the top you should see an option to fix the sound (Midi, WaveOut). Select that and press Next. If the option is grayed out, then that particular registry fix is not needed. This fix will restore a missing "wavemapper" registry key.
    I completed this – No help
    Go to the Flash Player Settings Manager website. Click HERE.
    Check the box called "Allow third-party Flash content to store data on your computer."
    I completed this – No help
    Go to the Flash Player Settings Manager website. Click HERE.
    Click on the button to remove the data that the Flash plugins has stored for websites that you have visited.
    I completed this – No help
    Check if your sound device settings are correct:
    Start -> Settings -> Control Panel -> Sound and Audio Devices -> Audio
    This is not correct instructions for Windows 7. 
    Obviously I have checked sound settings in RealTek Audio manger several times. As well as in the mixer, and in the Internet Option Settings (Advanced Multimedia).  I checked setting under “Hardware and Sound” there is nothing there that has any effect.
    If you have QuickTime installed, then go to the QuickTime control panel. On the Audio tab, set "Default Music Synthesizer" to "General MIDI".
    On the Advanced tab, disable "Enable playback of Adobe Flash tracks".
    On the browser tab, click on "MIME Settings". Under "Miscellaneous", make sure "Flash media" is unchecked.
    These are not accurate options on my computer (Quicktime 7.6.9).
    Under Default Music Synthesizer.  There is no “general MIDI” only option is “Quicktime Music Synthesizer”
    Advanced Tab: “Enable playback of Adobe Flash tracks".is not an option
    Browser Tab: "Flash media" is not listed under MIME Settings (There is no Miscellaneous)
    Check if the file msacm32.drv is present in the C:\Windows\system32 folder. If not, copy it from another PC (that has the same version of Windows) and place the file in the system32 folder. If you are using a 64-bit version of Windows, then the file should be present in the C:\Windows\SysWOW64 folder.
    Verified these files are here.
    If you are also having sound problems with other applications, then re-installing your audio drivers might solve the problem.
    I am not having problems with other audio applications, but I still completed this – No help

  • I am not getting any sound on my iPad while using key board or in any games

    I am not getting any sound while using key board , in games have tried all the option as suggested by other members like rotation / mute switch setting , resetting the iPad etc . Any other way to solve this issue

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • I am creating  input   tax code in FTXP,BUT i am not getting tax code  whil

    Dear EXpert,
    I am creating  input   tax code in FTXP,BUT i am not getting tax code  while doing PO? what is the reason?
    thanks& Regards,
    saran.

    Hi Saravana
    Please make sure you have done all the following settings in SPRO.
    SPRO>Basic Settings->Taxes->
    1)Define Tax determination rule
    2)define regional codes
    3)Assign Delivering Plants For Tax Determination
    4)Define Tax Relevancy Of Master Records
    5)Maintain Sales Tax Identification Number Determination
    regards
    Yogesh

  • 'Document does not contain any items' error while posting GR from BAPI

    Hello Friends,
    I am trying to post GR from BAPI 'BAPI_GOODSMVT_CREATE' but some time it post successful and some time it does not post..gives error 'Document does not contain any items'....i have search all option but did not get any solution why this error is coming....kindly help me if you have any information regarding that.
    The strange thing is i have alrady posted GR with some test data and later on again am trying to post GR with same test data but it is giving error as above.
    For your information...i am using enhancement spot in standard program for GR posting...could it give any problem.
    Regards,
    Rajkishor.

    Solved by my self...problem was i were using enhancement spot in standard program because of this it was creating problem have search new enhancement spot and put my code out there now it is working fine.
    Thanku very much all of you for your reply.

  • ITEM IS NOT RELEVANT FOR BILLING WHILE DOING STO (VF01)

    HI
    I am getting an error while doing STO in CIN
    Item is not relevant for billing while doing VF01 STO proforma invoice JEX with delivery document type NL and item category NLN
    I searched the forum but not able to get an appropriate solution for this.
    Kindly revert me on the same
    Regards
    MANOJ

    Hi Manoj,
    The only reason for the error you are encountering are,
    A. The item category missing at the item level in the copying controls from delivery to JEX (billing type)
    Kindly check throughly and confirm,
    If it is there , then delete the configuration , i.e. item category from the copying controls and do it again.. Even if this do not resolve your issue, ask your technical team to debugg the billing document during creation and check.

  • My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

    My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

    Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.

  • I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

    # Question
    I can no longer get to Facebook Via firefox It comes up loading in the tab but does not get any further one minute it was working the next it was,nt should I try uninstalling firefox then reinstall or does anyone know what could of happened thanks

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Audigy 4 Pro - I/O Hub does not get any po

    Hello all,
    I purchased an Audigy 4 Pro a few days ago and I cannot get the external hub to power on.
    This somewhat sumarizes what I tried so far:
    . Uninstalled all drivers and software of my old Soundblaster Li've 5. Platinum
    2. Also removed all entries of the old soundcard from Device Manager
    3. Powered down the PC fully, took out the Li've 5. and powered it back on and logged on to my Windows XP (SP2).
    4. Just to be sure before installing the drivers for the Audigy 4 Pro I cleaned out the cookies, temporary internet files, all other Temp folders, the Prefetch folder and also ran a program to clean the registry.
    5. De-activated my Norton AntiVirus Corporate Edition's Real-time protection, it's services and also my ZoneAlarm Pro from starting up the next time I reboot Windows.
    6. Powered down the PC again, took the power cable out, made sure there was no power whatsoever left and carefull inserted the Audigy 4 Pro card in an empty PCI slot.
    7. Connected the larger AD_Link to the card, then to the hub
    8. Connected the smaller AD_Link to the card, then to the hub
    9. Finally connected the power convertor cable to a free systems power unit
    0. Double-checked the entire hardware setup a few times and power the PC back on
    . Windows XP detected and installed the OHCI Compliant IEEE 394 Host Controller and the 394 Net Adapter
    2. Canceled to proceed looking for a driver when it found the Audigy 4 Pro card
    3. Installed the drivers and applications that came with the Audigy 4 Pro. Everything went smooth - no error messages during the installation.
    4. Rebooted PC after prompting to do so.
    5. With ZoneAlarm and my Norton Antivirus de-activated, all drivers and programs installed properly the external I/O hub does NOT get any power. I also made sure to check this with the remote control.
    I have ofcourse no sound coming out that hub when plugging in my headphone and also cannot use my microphone.
    6. I ran the Diagnostics program that was installed automatically with the other Creative applications: It claims there aren't any problems.
    7. Powered down the PC again, checked all connectors, powered the PC up again: Same problem... no power.
    8. Installed the latest 4-in- drivers found on viaarena.com: Same problem
    9. Uninstalled and reinstalled the drivers and applications: Same problem
    20. Uninstalled and reinstalled the drivers and applications after taking out all other PCI cards and placing the Audigy 4 Pro card into an other PCI slot: Same problem
    2. Set my BIOS to factory defaults: Same problem
    22. Formatted the PC and reinstalled Windows XP (SP) with every update thinkable... Same problem
    23. Formatted the PC AGAIN ( ! ) and reinstalled Windows (SP2) with updates .... Same problem
    Another problem: Sent a detailed e-mail to Creative Support Europe.... Still NO respons after 48+ hours.
    Anyone else should have a solution I would appreciate trying out, or if all fails I'll go for a Terratec model.
    Thanks in advance!
    PC Stats: Asus A7V266 - VIA KT266 Chipset (VT8366 North Bridge with VT8233 South Bridge) / BIOS version: 0 / AMD Athlon .4GHz / 52Mb
    Message Edited by HilTek on 07-05-2005 :04 PM

    Amazing, I got mine about 3 days ago and have been pulling my hair out trying to resolve the same problem. I have checked power connections, reinstalled drivers. I think something is wrong with the box. I tried to call support yesterday, which was a Saturday, but they aren't available til Monday. I guess I will call them Monday. Let me know if you find anything out in the mean time.
    Thanks
    John
    AMD Athlon(tm) 64 FX-57 Processor
    A8N-SLI Premium
    NVIDIA GeForce 7800 GTX
    GB RAM
    WIN Pro x64

  • I can not get NETFLIX to work, does anyone have any suggestions.

    can not get NETFLIX to work, does anyone have any suggestions...
    I have downloaded and installed Silverlight..
    and uninstalled it and reinstalled it...
    I have called Microsoft and also called Netflix support..
    who advised me to call Microsoft.
    Microsoft advised to to call apple
    seriously?
    HELP!

    Have you tried a different web browser like Mozilla FireFox?
    Have you tried just restating your Mac?

  • Does iOS 6 beta 4 is the final official iOS 6?? i am not getting any update for my mobile (which is running iOS 6 beta 4 ) to update to official iOS 6

    Does iOS 6 beta 4 is the final official iOS 6?? i am not getting any update for my mobile (which is running iOS 6 beta 4 ) to update to official iOS 6

    Take your backups and copy your photos off, then put your device in DFU mode to do a restore.

  • Site Window does not show any item

    Hi,
    My site window does not show any items/folders to modify after I open my site.  I was wondering if there is anyone who can point out what I did wrong.  Usually the site window shows all the contents as soon as the site is opened.  Please help.  Thank you.
    coskinas

    If you look inside the webcontent folder, in Finder view (or Explorer???? if you're using Windows) - anyway, are there in fact files in there?
    Try Site > Update > Refresh all.
    If that doesn't work, try making a new site from existing content, which should give you a new site file (call it something slightly different) sitting beside your old one. I'm guessing here, but it can't hurt.

  • HT4539 My Ipad does not have the software update option so i do not get any updates.  How can I get all updates?

    My Ipad does not have a software option so I do not get any updates - what can I do?

    Check out the Apple link below.
    http://support.apple.com/kb/HT4972

Maybe you are looking for