Not getting backend systems

Hi I'm new to VC and I'm trying to configure the backend systems to be used. I'm using a user that has been assinged the VCRole and has been properly mapped to the backend system (a R3 type system). However I don't get any system in my list of backend systems.
I have to use the administrator user, because it is the only one that sees the list of systems properly.
Do I have to configure anything else? Any idea?
Thanks in advance.

Eduardo Cabezas López wrote:
> Hi I'm new to VC and I'm trying to configure the backend systems to be used. I'm using a user that has been assinged the VCRole and has been properly mapped to the backend system (a R3 type system). However I don't get any system in my list of backend systems.
>
> I have to use the administrator user, because it is the only one that sees the list of systems properly.
>
> Do I have to configure anything else? Any idea?
>
> Thanks in advance.
Hi,
the user which u r using must have content administartor role
regards
srinivas

Similar Messages

I am not getting any system in User Mapping..............

Hi,
I have created one user... But in my user
Personalize > User Mapping > System drop down list i am not getting any systems....
How can i solve this problem..
please help me...
Best Regards
Ravi Shankar B

Hai ravi,
After navigating from User Admin to User Mapping,
In the Search , enter your userId and search it in Users.
Your User Id will be displayed in the Table With Edit Link.
Now check the drop down List box at the right.
Your System will be displayed.
Before doing user mapping , Make sure that you have created system properly and gave all Connector and User Management Property Entries and Created System Aliases.
Hope This Helps. Award Points if u find this use ful.
Regards,
Eben

I am not getting Business System into my Integration Directory.

Hi All!
This is satish, I created Business system in SLD. How to get them in Integration Directory.Please help me.
Thanks in advance!

Hi Satish,
Go to Service without Party->Right Click->Assign Business System->it will show you list of Business Systems created in SLD -> then go ahead
Then
2 options to refresh the cache-
Integration Directory->Environment->Clear SLD Data Cache
Another way is -go to SXI_CACHE / Goto - Business System -> delete the content
Still , if you are not able to see the Business sytem in the Directory, the just go and check in the SLD. If it exists just change and save it.
Then synchronise the same by SLD cache refresh as mentiond.
changing BS
Also refer for more-
Problem in Assigning the Business System
Hope this helps,
Regards,
Moorthy

I purchase this macbook at a yard sale. did not come is os disc. i can not get the system preference to open up an operate to change desktop and remove old accounts. any suggestions will be very helpful

hello community, im new to macbook; i purchase this macbook at a yard sale everything seems to be working ok but i am unable to access the system preference in order to change the desktop or remove old accounts. the owner did not have the os disc. does anyone have any suggestions on how to fix this problem.
thank you

If you don't have your install disks you can get the gray install disks by calling Apple StoreCustomer Service at 1-800-676-2775 They can send them to you for about $16 per disk plus S & H. Just give them your serial number and they'll know which ones you need. Which would be $32 for the two disks. With the original disks you also get the iLife that was current when your MacBook was bought included on the #2 disk.
You can order a Snow Leopard 10.6 install disk for $29 as long as you have at least 1gb of RAM and 5gb of free space on your hard drive. http://store.apple.com/us/product/MC573Z/A?mco=MTY3ODQ5OTY

To jschell How to get data System properties by JNI and Runtime.exec()

Thank you very much for answer. ummm....but I'm can not gets data system properties by JNI or Runtime.exec(). Please help me. I'm want create Java-Applet for data System properties ( memory quantity?, Harddisk capacity?, CPU speed ?, Printer Name? and all hardwares ) in my computer. It very important for me. Help me please. thank you..

Java applets are restricted to accessing only some system properties - and it is good so. I would not be happy if any applet could inquire about, say, my user name or the amount of memory in my box.

I want to reset (clean out) my old 4S. I have just bought a 6 and have the 4S as a stand alone unit (No connection to network. I can not get the sitcom to do the erase all command. It wants to access the Cloud which is impossible.

I want to reset (clean out) my old 4S. I have just bought a 6+ and have the 4S as a stand alone unit (No connection to network). I can not get the system to do the erase all command, it wants to access the Cloud which is impossible. Is there anyway to 'Erase All Content and Settings".

Something here might help a detailed list of actions
What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
refer to If you no longer have iPhone section

AE 5.2: Roles get provisioned to backend system but profiles randomly not

Hi,
we are currently switching from profiles to roles and therefore created user request containing the roles to be assigned and the profiles to be removed. The roles are assigned successfully to the user but the some profiles are not removed randomly. The backend user used by AE has the correct authorizations.
Had anybody such a problem before?
Thank you for your answers
Marco

Hi Hersh,
we did a user role comparison several times before and users had the profiles already for a period of time. Also the request get submitted radomly meaning we can't monitor all the requests because the last approvers approve the request sometime and the the request gets provisioned. Further, AE should provide any message in such a case.
Could it be if the user to be changed is logged on to the system that such a scenario could happen.But when changing user authorization in the backend system itself this doesn't have any impact and this also applies for the GRC backend user.
Regards.
Marco

SRM PR is not getting created in ECC backend

Hello Experts,
We are running SRM 7.0 with SRM-MDM Catalog, we are using SRM for shopping. We do have PI 7.11 running in the Environment as well.
We are on ECC 6.0 with Ehp 4.0
Purchase Order:
However we can see the PO creating successfully using PI.
Question, in the SRM table (BBP_FUNCTION_MAP), we see the object type: BUS2012 for ERP 4.0 has adapter name: /SAPSRM/CL_SOA_ADPT_PO_CRT_ERP for when creating PO. Please see teh screen shot.
is this the reason that we need PI?
Purchase Requisition:
PR Creation is not working:
PR is not getting created in the ERP, PR uses Object type: BUS2105, Adpater CL_BBP_BS_ADAPTER_RQ_CRT_470 for ERP 4.0 System type, can you please tell me if the adapter is correct for ERP 4.0 system type?
I also have a question to ask:
1) Where did you see that PR/PO was send to PI System (PI1)? My understanding is that since ERP amd SRM are 2 ABAP Systems, why we cannot send the PR/PO directly to ERP system from SRM? Why do we need a middleware(PI) in between for this process? We should be able to USE BAPI function to do it correct?
Please advice.
Thanks
Kumar

yes, i could see a PR number with all this additional details as below.
Table   BBP_PDBEI
CLIENT                       453                                                              Client
GUID                         4CAEFA58EB9D005CE1008000AC1C2031                                 Globally Unique identifier
BE_LOG_SYSTEM                QA1400                                                           Logical System of Logistics Backend
BE_OBJ_ITEM                                                                                Follow-On Object Item in Back-End System
BE_OBJECT_TYPE               BUS2105                                                          Follow-On Document Object Type in Back-End System
BE_OBJECT_ID                 2000000167                                                       Follow-On Document Object ID in Back-End System
BE_REFOBJ_TYPE                                                                                Reference Object Type in Back-End System
BE_REFOBJ                                                                                Reference Object in Back-End System
BE_REFOBJ_ITEM                                                                                Reference Object Item in Back-End System
BE_REFOBJ_SBITM                                                                               Reference Object Sub-Position in Backend System
BE_REFOBJ_TYPE2                                                                               Reference Object Type in Back-End System
BE_REFOBJ2                                                                                Reference Object in Back-End System
BE_REFOBJ_ITEM2                                                                               Reference Object Item in Back-End System
BE_REFOBJ_FYEAR2             0000                                                             Reference Document Object - Fiscal Year in Back-End System
BE_STGE_LOC                                                                                Storage location
BE_PLANT                     2016                                                             Plant
BE_BATCH                                                                                Batch Number
BE_VAL_TYPE                                                                                Valuation type
BE_MOVE_REAS                 0000                                                             Reason for Movement
BE_EXPERYDATE                00000000                                                         Shelf Life Expiration Date
BE_PUR_GROUP                 206                                                              Purchasing group
BE_PUR_ORG                   2000                                                             Purchasing organization
BE_CO_CODE                   2000                                                             Company Code
BE_DOC_TYPE                  CLRQ                                                             Purchase Requisition Document Type
BE_ACCREQUIRED                                                                                Account Assignment for Logical Backend Required
BE_SP_STK_IND                                                                                Key for Special Stock Section
BE_INFO_REC                                                                                Number of purchasing info record
BE_MOVE_TYPE                 201                                                              Movement type (inventory management)
BE_PACKNO                    0000000000                                                       Package number
BE_INTROW                    0000000000                                                       Internal line number for limits
BE_ITEM_TEXT                                                                                Short Text of a Service Purchase Order Item
BE_PO_PRICE                  1                                                                Price from Backend
BE_UNLOAD_PT                 200                                                              Unloading Point in Backend
BE_DEL_IND                                                                                Deletion Indicator in Backend Documents
BE_TRACKING_NO                                                                                Requirement Tracking Number
BE_COND_TYPE                                                                                Condition Key
BE_COND_STEP                 000                                                              Level Number
BE_COND_COUNTER              00                                                               Condition counter

WBS Elements not getting created in ECC Project System from CRM 7.0

Dear all,
We are trying to integrate SAP CRM 7.0 with SAP ECC-PS module. The objective is to bring in the marketing plan and elements data from the CRM system, and to create the corresponding WBS in project system. We have done most of the configuration as recommended by SAP in both the systems, and we see that the BDOCS are getting generated and sent to the ECC system. The following steps have been successfully completed:
1.       Set up the RFC connections between the two systems
2.       Selected the connection type as Middleware in CRM system.
3.       Installed the cProject Add on in CRM box.
4.       Created a project scenario (with project and network profiles) in the PS system and assigned the same in the CRM system.
5.       The Project Scenario in PS config has the same name as the Project Type in CRM config.
6.       Created and released the campaign ids being created in the CRM system.
As already mentioned, we can see that the BDOCS are coming to the ECC system and are getting stored in BDOC_TRACK table. However the issue is that the corresponding WBS elements are not getting generated in the ECC system. Is there anything that that we are missing in the ECC box which would trigger the WBS element creation?
Request you all to share your inputs which would be immensely beneficial for us in achieving this integration.
Thanks and Kind Regards,
Aditya Shrivastava

Hello Aditya,
We too are facing this issue.. if you have resolved the issue could you please let us know the solution ?
Some inputs related to our system,
We have upgrade from CRM 4.0 to CRM 7.0 SP07 and R/3 backend system is on 4.7 SP27, earlier we have completed the upgrade on sandbox without any issues which was upgrade to CRM 7.0 SP04 but with SP07 we are facing the problem of WBS Element not getting created in R/3.
Your help is highly appreciated.
Thanks & Regards,
Sumukh Kapoor.

How to get Backend (R/3) system type

Hi team,
Currently backend (R/3) system details are maintained in SPRO ->Supplier Relationship Management ->SRM Server -> Technical Basic Settings -> Define Backend Systems. Here we maintain entry of logical system, its description, RFC Destination, system type and other fields. Values of backend systems are used at lots of place by referring table BBP_BACKEND_DEST quoting system type in where clause of select query. Currently values of system type are hardcoded as R3470 but now our backend (R/3) system is upgraded to ECC6.0 and this can happen later as well whenever SAP plans for new release.
So now we are looking how we can remove this hardcoding from select query so that whenever system is upgraded, this detail need not to be changed. Please suggest the place either table or function module from where we can get details for system type.
Thanks
Siddarth

Hello Siddarth,
When you have only one backend system, better way is to use BBP_GET_BACKEND_SYSTEMS function module instead of reading directly BBP_BACKEND_DEST table using SYS_TYPE as select criteria.
If more than one backend is linked to SRM, you have to use LOGSYS given by ET_LOGICAL_SYSTEMS table from function module above.
In this way, your logsys will be used as select criteria, depending on which backend must receive RFC call. It will be also hard coded in your select, but normally you never change a log system, contrary to system type (due to upgrade).
Regards.
Laurent.

JDBC Adapter - DELETE operation not working in receiver backend system

Hi All,
In my scenario ,I want to delete entire records of the table from one backend system.
I have created the inbound message and after mapping it is as below:
<?xml version="1.0" encoding="UTF-8" ?>
<ns0:abc_delete xmlns:ns0="http://abc/xi/BACKEND/IB_IF_18/100">
<STATEMENTNAME>
<F12345 action="DELETE" />
</STATEMENTNAME>
</ns0:abc_delete>
here F12345 is the table name.
When I execute this scenario I get black and white flag in XI SXMB_MONI but in backend system (SQL Server) no records get deleted the table is as it is.

Please have a look on this (same mentioned by Bhavesh)...
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/frameset.htm
 <StatementName3>
<dbTableName action=DELETE>
<key1>
<col2>val2old</col2>
<col4>val4</col4>
</key1>
<key2>
<col2>val2old2</col2>
</key2>
</dbTableName>
</StatementName3>
● action=DELETE
Statements with this action cause existing table values to be deleted. One or more <key> elements formulate the condition for which table values are deleted. The names of <key> elements are arbitrary. Column values within a <key> element are combined with a logical AND; different <key> elements are combined with a logical OR.
The corresponding SQL statement for StatementName3 in the example above is as follows:
DELETE FROM dbTableName WHERE ((col2=val2old AND col4=val4) OR (col2=val2old2))
The response document contains the following element:
<delete_count>count</delete_count>
If there is no <key> element, or if there is a <key> element but it is empty, then no condition is specified and the entire table is to be deleted. This may not be permitted by the configuration of the JDBC adapter for security reasons and will therefore result in an error during message processing and an appropriate error message.
Thanks
Farooq.

Backend System with Release 701 are not supported

SRM 5.0
Extended Classic Scenario
CCM 2.0
When updating the vendors in SRM system using TC - BBPUPDVD getting the below error message :-
Backend System with Release 701 are not supported
Have checked in table - BBP_BACKEND_DEST, the backend entry is properly maintained.
Can any one advice.
Regards,
Jayoti
Edited by: SAP jayoti on Dec 7, 2010 1:11 PM

The problem is resolved for vendor relication after applying the below notes 1313972 and 1372175.
ECC sandbox seems to be in 701 release. When the backend system ECC is in release 701, vendor replication fails with the error message that 'Backend system release 701 not supported'. We need to apply notes 1313972 and 1372175 to fix this issue. I have applied them in Sandbox and the issue is resolved now.

Not able to do user Mapping with the backend System

Hello all,
I am trying to Map a user to a windows based KM System but getting an error like
"There is a configuration issue which leads to problems when accessing user mapping data for the selected backend system 'KM_Test_System'. Usually, the reason is user mapping being configured for strong encryption, but the necessary additional files being missing. Check the security log file for further information and hints on how to solve the problem."
Can somebody tell me what could be the possible reason for this and how to handle this. I dont have access to the Portal server right now , so not able to see the security log.
Thanks to all,
Regards,
Sarabjeet Singh.

Hi Sarbjeet,
I believe this links will help you understand and solve your problem:
user mapping is not saved
and
http://help.sap.com/saphelp_nw04/helpdata/en/04/d246215f1d4f588d1d9c49391acb01/frameset.htm
Hope this helps,
Robert

Some POs are not generated in the backend system

Hi,
we've implemented SAP SRM 5.5. in a Classic Extended Scenario with SAP R/3 as the backend system.
Recently we are facing a problem related to some Purchase Orders. If they have some wrong information for the backend system, they do not get the "Error in process" status but the are put in the "Ordered" status even though they are not replicated in SAP R/3.
This problems occurs only with some POs and only (for as much as we could see) if the PO has been generated from an Offer (S.C.->Bid Invitation->Offer->PO).
Could you please help me out with this issue? I can't understand why this is happening...
Thanks a lot for your precious advices!
Giovanni

Hi Sanjeev,
thanks for your quick reply. I've checked the RZ20 and there's an error message related to the Header Data. I've checked also the PO from BBP_PD and I could see that in table BBP_PDIGP the EP subtype is missing. If I force it and then I transfer the PO again, everything is fine.
I can't understand why this is happening. I've never had any problems like that with other POs created straight out of a S.C.. The issue is related only with POs created out of a Bid.
Please, let me know if you have an idea.
Have a nice day!
Giovanni

Could not connect to backend system through portal via Web Dispatcher

Web dispatcher redirecting problem
Dear Experts,
I have implemented a scenario which comprised of customizing that is developed in Portal EP7. What customizing does is getting report from backend system (ERP 6.0)
According to the needs for reaching the portal from internet I configured the SAP Web Dispatcher in the environment as you may see its contents below.
The problem is when I run the customizing in portal system then it requires connecting to backend system (ECC 6.0) to get the data (report). But from this point on web browser comes to a blank page, could not view the data that is from backend system via portal. Because in the time when it tries to retrieve data in backend system, on the left bottom of the explorer the indicator shows internet address that system uses connecting to the backend system as local network address of the backend system which is not known in internet therefore I get blank page.
The question is how to configure the web dispatcher in a way that both portal and backend systems could be reachable from internet?
Contents of profile file of Web Dispatcher as;
SAPSYSTEMNAME = WDP
SAPGLOBALHOST = portald
SAPSYSTEM = 02
INSTANCE_NAME = W02
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_CT_RUN)
Accesssability of Message Server
rdisp/mshost = portald
ms/http_port = 8101
Configuration for medium scenario
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
SAP Web Dispatcher Ports
#icm/server_port_0 = PROT=HTTP,PORT=81$$
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTP,PORT=60000
icm/HTTP/redirect_0 = PREFIX=/, TO=/irj/index.html
icm/HTTP/redirect_0 = PORT=50000
#maximum number of concurrent connections to one server
wdisp/HTTP/max_pooled_con = 500
wdisp/HTTPS/max_pooled_con = 500
Configuration for medium scenario
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
Regards,
Ali Taner

Hi,
To resovle this you must have registered FQDN for your backend system as well. When you call the report from Portal using internet it should call that FQDN of your backend system then DNS will resolve this & you will get the expected page. This way only you can resolve this issue.
Thanks,
Sachin Sable

Not getting backend systems

Similar Messages

Maybe you are looking for