Not getting battery to last as long as it did on first day of use

After hearing about all the battery problems people are having I have been concerned about the life of my battery. Ive been comparing how long my battery lasts now, to when I used it the first day. On the first battery cycle I used the phone heavely for 9 - 10 hours.
Now Ive been only getting about 6 hours of heavy use (and yes i have been charging the phone correctly seeing the "glow" and the plug in the battery at the top of the screem.)As of right now my battery is about 80% full with 2 hours, 5 min use and standby 10 hours, 16 min. Are those numbers resonable? I was wondering if there are any ways of getting my battery to last as long as it did on my first use.

From my experience I have noticed the battery life getting better over time. I did a restore and that did not seem to change the battery life much. I was getting about 4-5 hours with heavy web and e-mail usage. I noticed the most noticeable change when I switched from using edge to wi-fi when possible, and turning wi-fi off when I did not need it. Now I am getting 5-6 hours of heavy usage with about 30-40% battery left over, and that is with the same amount of web and e-mail usage. And one more thing, I was using a soft case on the iPhone, and seemed to generate more heat, which I believe was shortening the battery life. I removed the case and it seems to be cooler during heavy usage. I know this was not a scientific experiment, but it may have been causing some of my battery issues.
The Edge network seems to be the major culprit when it come to battery life.

Similar Messages

  • Vendor list - not get transaction from last three years

    Dear Sir,
    Can we have a list of vendor which are not get transaction from last three years ?
    Vijay Vadgaonkar
    SAP MM

    either you write a z-report
    or you download all vendor numbers from LFA1 table
    then run MC$4  transaction for analyzing period of last 3 year.
    download the vendor numbers from this report as well.
    Finally compare the both download (easiest with VLOOKUP formula) to find the delta, which are the inactive vendors.
    However, these are the inactive vendors from purchasing point of view only.
    vendors like restaurants and customs and tax authorities may only have financial postings and never purchasing activities.

  • For two days I have been getting intermitant interference sounding like a radio program with the first day in Spanish.

    I have 7.0.1 and Lion installed on a Mac book pro. The first day Spanish programing just started playing with no one at the computer. The second day the interference was in English having to quit Firefox to get it to stop.
    I rebooted and cleaned the system but it has reoccurred. I have used iGoogle as my default homepage flawlessly for 2 years with this only occurring after I sign into iGoogle from the Google search page.
    This machine is used for business only and not exposed elsewhere. Any thoughts before I remove and reinstall?

    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the files sessionstore.js [2] and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    See also:
    * [1] http://kb.mozillazine.org/Session_Restore
    * [2] http://kb.mozillazine.org/sessionstore.js

  • Material Codes - not get transaction from last 5 years

    Hi
    Can we have a list of Material codes which are not in use/transacted from last 5 years?  I mean, want to find out all dormant Material codes.
    How can we find one time used Material codes?
    Thanks
    Ajit

    it depends:
    1. if your company's data was not archived within 5 years.
    2. there are already archived data of MM.
    normally i will use MB51 and get the the list of all material movements within 5 years.
    then you can know what materials have movements within 5 years. (sorting and subtotal in excel)
    then compare with full material list to get the result, with vlookup in excel.
    by the way, MC46,MC50 can also work from certain degrees.
    Edited by: JiQing Zhao on Apr 14, 2011 2:08 PM

  • 5.1 is out today for T-mobile - why did I just get 5.0 last night? and why did I get Verizon Cloud - draining battery

    5.0 messed up email, added Verizon Cloud and that appears to be what was using battery - can't find it to uninstall it - where is it?

        Oh boy! What seems to be going on with the email since your update? Was the Verizon Cloud launched? If not, what happens as you go in to clear the app cache? http://vz.to/13JmFX8
    TamaraH_VZW
    Follow us on Twitter @VZWSupport

  • I can not get Adobe after effects cs6 to open. It says you can't use this version of the application adobe after effects cs6 with this version of os x

    Can someone please help me open adobe after effects?

    AE version 11.0 does not work with my new MacBook Pro
    Mylenium

  • When i try to download the newest version of adobe it will not down load and i do not get a dropdown screen telling me that firefox did not ask me to download adobe and there is no allow tab either

    it does this after i get a message that firefox is downloading a upgrade after that happens firefox tells me i need to download the newest version of adobe

    If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • Can not get Itunes match to work. It stops on the first step and on my status bar it just says "sending information to apple" this goes on for hours. Help please.

    Help please. I cannt get itunes match to work. It just stops on the first step and the status bar continues to say "sending information to apple" for hours. Any ideas?

    I am having a similar issue with iTunes Match. It keeps hanging up on the same number of files (11035 of 15455) during STEP 2. I've tried signing out, re-opening iTunes, re-booting, etc. Still comesup stuck for hours. What I also don't understand is why the "iCloud Status" option in "View/View Options" disappears intermittently. It was there when I first booted up this morning and I reviewed all my music files to see if there were any "errors" and there werne't any. But after Match gets stuck on the same file niumber (11035) I 've signed out and re-booted and now the "iCloud Status" check box is missing from "View Options" (only the "iCloud Download" option remains present all the time. Please help. (I've also checked to make sure all the music files are within the suggested bit rate parameters and file type - This is also a brand new iMac out of the box). Running out of troubleshooting ideas and beginning to think this service just doesn't work well.

  • After purchasing an Adobe PDF Pack, I do not get the Content Editing option in the Tools bar of my PDF I use a MacBook Pro- please advise

    I use a MacBook Pro
    After purchasing an Adobe PDF Pack, I still don't get the Content Editing option on my Tools bar
    please advise

    Thanks Sara, however my understanding is what I purchased enabled me to
    convert pdf into word for editing, please see screen shot attached.  I
    believe this shows that in the PDF Pack which i have purchased I am able to
    do this.
    Please further advise
    Cheers
    Therese
    Therese S
    [private information removed by moderator]
    On Thu, Mar 12, 2015 at 5:48 AM, Sara.Forsberg <[email protected]>

  • I bought a song but did not get it! it said i downloaded but did not get it

    i bought a song but it did not download on my account!

    Howdy Julie,
    Try clicking iTunes, Store, Check for Available Downloads.
    If its not there don't worry, iCloud will let you redownload the song. Just click the Purchased link on the right side of the iTunes Store, Music, click All Songs, then the iCloud download icon to redownload the song.
    And, if its not showing up in Available Downloads or Purchases, the purchase didn't go through (at least not with that iTunes account).
    WTH.

  • I upgraded my storage plan, I do not need it and I am trying to downgrade but when I get to the last part where I am to click on "done", "done" is not illuminated and I can not complete the transaction...in other words, downgrade my storage

    I am not able to downgrade my storage.  The process does not complete on the last page.

    LONG STORY---It took 78min16sec but I did get my storage downgraded. I called 1-800-MY APPLE (1-800-692-7533). After 5 min I explained my issue (same as yours - couldn't get DONE to click) and they said they needed to transfer me to Apple Care. 15 minutes later Apple Care said they needed to transfer me to iTunes ETA 15 more minutes. W-A-Y more than 15 min later, the Apple Care person, who did check back with me throughout the wait time, handed me off to iTunes. Apple Care and iTunes had talked and iTunes had my problem in the process of being taken care of as we began talking. The people were all very nice, knowledgeable and helpful. It took a LONG time, but the problem is now solved. Actually iTunes said that my storage had already been downgraded. iTunes also processed a storage upgrade refund for me.
    SHORT STORY - Phone 1-800-MY APPLE (1-800-692-7533) and ask to speak to an iTunes Store Support Advisor to downgrade your iCloud storage plan.

  • Hi,my iphone 5 is not getting charged,but i can connect to itunes in usb.but when i put for charging it is is saying this accessory may not be supported,please help

    my iphone5 is not getting charged,but if i connect to my computer via usb i can use itunes and other all functions.normally if i connect it is charging battery also,but now it is not charging .it is saying this accessory may not be supported and the cable iam using orginal apple cable, alsoiam loosing my battery percentage.please help me

    Hello beenafromgbr,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Troubleshooting iPhone, iPad, and iPod touch accessories.
    http://support.apple.com/kb/ts2634
    Best of luck,
    Mario

  • P Tax is not getting displayed in the payslip

    Hi All,
    The P Tax is not getting displayed in payslip. I have checked the customization again but no use. In PA30 (IT0588) i have 'checked' the box for P Tax eligibility and have also assigned /3P3 in the form IN01 in window 2 (for deductions).
    Please help.
    warm Regards,
    Shruti B.

    Hi,
    Thank you All.
    Regards,
    Shruti B.

  • Iam not getting the data on screen after using the user exit zxpadu01

    Dear Freinds
                As per my requirement when the user enters value Ansal  it should get defaulted to Amount field (bet01 ) based on the wage type
    i have written calculation ( q0008-bet01 = ansal/100) before it getting defaulted to bet01, i found that value is not getting default  on the screen for bet01 once i enter value for Ansal , please any body correct my code
    in   ZXPADU02 i have written the code as  below :
    data : wa_p0008 like p0008,
            i0008 like p0008,
           l_v_ANSAL type ANSAL_15,
           l_v_amount type PAD_AMT7S.
    CASE innnn-infty.
    when '0008'.
    CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
    EXPORTING
    prelp = innnn
    IMPORTING
    pnnnn = wa_p0008.   -- HERE I GOT ALL THE DATA EXCEPT BET01
    if wa_p0008-lga01 = 'MFPY'.
    l_v_ansal =  wa_p0008-ansal.
    l_v_amount = l_v_ansal / 100.
    move l_v_amount to wa_p0008-bet01.
    CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
    EXPORTING
    pnnnn = wa_p0008  --- HERE I CAN SEE EVEN THE BET01 IS FILLED
    IMPORTING
    prelp = innnn.         --- HERE I CAN SEE LGART BUT NOT AMOUNT VALUE
    endif.
    when others.
    endcase.
    IN ZXPADU01 I HAVE WRITTEN AS BELOW:
    data : wa_p0008 like p0008,
            i0008 like p0008,
           l_v_ANSAL type ANSAL_15,
           l_v_amount type PAD_AMT7S.
    CASE innnn-infty.
    when '0008'.
    MOVE-CORRESPONDING  innnn to wa_p0008.
    CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
    EXPORTING
    prelp = innnn
    IMPORTING
    pnnnn = wa_p0008.
    if wa_p0008-lga01 = 'MFPY'.
    l_v_ansal =  wa_p0008-ansal.
    l_v_amount = l_v_ansal / 100.
    move l_v_amount to wa_p0008-bet01.
    CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
    EXPORTING
    pnnnn = wa_p0008   --- I CAN SEE ONLY WHEN I COME AGAIN
    IMPORTING
    prelp = innnn.
    endif.
    when others.
    endcase.
    Now my problem is as follows :
                   i have entered the value for Ansal (ex: p0008-Ansal = 1000) ..........and i say enter then i should found the calculated value for the ansal through my coding
    and it should  display in bet01 as 10 ( q0008-bet01 =  p0008-ansal /100)
    but i dont find the value 10 being displayed for the field bet01 on the screen  when
    user enters Ansal  as 1000 .........even then i have saved it to test the scenario......
    now i came in displayed mode (pa20 ) for the infotype 008 for the same personnel no for the same  dates .....where i created the record........i found that the value
    bet01 is there i.e i can see  the value bet01 as 10 ( my requiremnt here matching)
    but when the user say enter during the time of creation of the record the value
    bet01 is not getting defaulted with 10 .........why iam not able to understand
    PLEASE ANY BODY HELP ME IN THIS REGARD 
    regards
    shanti.

    Hi Pranesh,
                   i have used the logic which you hav given as below
    in ZXPADU02
      FIELD-SYMBOLS <fs>  TYPE ANY.
    ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
    if <fs> is assigned.
    <fs> = l_v_amount .  ---  amount as (ansal /100 i.e 1000/100 = 10) 10
    endif.
    still iam not getting the data for the field bet01
    this is the coding i am using
    data : wa_p0008 like p0008,
            i0008 like p0008,
           l_v_ANSAL type ANSAL_15,
           l_v_amount type PAD_AMT7S.
      FIELD-SYMBOLS <fs>  TYPE ANY.
    CASE innnn-infty.
    when '0008'.
    MOVE-CORRESPONDING  innnn to wa_p0008.
    CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
    EXPORTING
    prelp = innnn
    IMPORTING
    pnnnn = wa_p0008.
    if wa_p0008-lga01 = 'MFPY'.
    l_v_ansal =  wa_p0008-ansal.
    l_v_amount = l_v_ansal / 100.
    move l_v_amount to wa_p0008-bet01.
    ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
    if <fs> is assigned.
    <fs> = l_v_amount .
    endif.
    CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
    EXPORTING
    pnnnn = wa_p0008
    IMPORTING
    prelp = innnn.
    endif.
    when others.
    endcase.
    please help me as iam still not getting (value in bet 01) when i press enter once i enter value in ansal feild.
    regards
    shanti.

  • Asset Deperciation amount is not getting updated in cost acccount?

    Dear all,
    Created an asset and assigned that to a cost center and maintained dep. key for both book of accounts and cost account, then I run the dep. its getting posted to FI but at the same time when i check S_ALR_87010175  i am not getting the cost center report.
    please help
    Regards
    Raziq

    Hi Raziq,
    first let me mark a conclusion to be sure that i have understood you question.
    You run the  S_ALR_87010175 and don't see the particular asset X?
    Please run the S_ALR_87010175 only with company code.
    Can you see it now?
    Could you check this with oter reports, for example RAGITT*, AW01N?
    regards Bernhard

Maybe you are looking for