Not getting data in cube from PSA.

Hi Xperts,
we r loading the data to our cube for some material code.but when i am checking for that material code with PSA as i am not getting the material codes in PSA.(the material code of PSA and Cube r totally different,some of the material code is matching which should not be happen.)
But as per my knowledge what ever the data in PSA we will get only that data in our cube.
now my question is why i am not getting all the records in my cube and How can i get this?

Hi,
Check in ECC - RSA3 data and then load to BW and chcek in PSA and Cube do like this.
1.Check in RSA3.
2. Load upto PSA only.
3.Check the data PSA Vs ECC.
4. Then load data from PSA to Cube
5. Then check PSA vs CUbe.
In this way find where the error. Take only wrong/few records then check it is easy.
Thanks
Reddy

Similar Messages

Not getting data in cube from lookup DSO

Hi guys,
I have a transformation with source DSO and the target Cube. In which I have a look-up from another DSO to the cube in this transformation, end routine. But I am not getting the records I needed in the cube, which are supposed to flow from another DSO. Any ideas would be appreciated.
regards...

Hi,
When we do look-ups in end routine, we don't have active rules for the transformation.
By default transformation's "Update behaviour of end routine change" is set to
Only target fields with active rules
all target rules(independent of active rules)
So, we have to change to
All target rules (independent of active rules) in order to get the look-up data independent of active rules.
In old software, we used to make an infoobject constant,.
"Update behavior of end routine change " was not available.
check it once because it happened to me before.
Hope it works....

Not Getting Data to PSA

Hi Experts,
i am facing the below critical issue.
i have enhanced 2 fields, item start date and end date to crm data source 0CRM_SRV_PROCESS _I Data Source.
while checking data from RSA3 i have got data for those 2 fields(item start date and end date) in CRM System, but while running Infopackage i am not getting data of those 2 fields to BI PSA table.
i got data from RSA3 in CRM Quality and Production Systems and not getting data in Quality and Production BI Systems at PSA level.
But i am getting data in RSA3 in CRM development system and BI Development system at PSA level.
Means i am facing issue only at Quality and Production BI Systems at PSA level.
Please find below screen shots for reference:
RSA3 Screen shot from CRM Quality System:
PSA Screen shot from BI Quality System:
Thanks & Regards,
Nagaraju K

Hi Anshu,
i have enhanced almost 20 fields for same data source, among these 20 fields other date fields also there which all are getting fine in dev, qty and production systems.
but only these 2 fields are not getting data to BI PSA level in Quality and productions systems.
Please find below code for reference:
   if lt_service_assign is NOT INITIAL.
READ TABLE lt_service_assign into ls_service_assign with key ITEM_GUID = ls_data-item_guid.
if sy-subrc = 0.
CALL FUNCTION 'CONVERT_TIMESTAMP_TO_BP_TIME'
EXPORTING
    BP_GUID_32         = ls_data-item_guid
    IM_TIMESTAMP       = ls_service_assign-BEG_TSTMP
IMPORTING
   EX_DATE            = lv_start_date.
*   EX_TIME            =
if sy-subrc = 0.
ls_data-ZZITM_STARTDT = lv_start_date.
endif.
CALL FUNCTION 'CONVERT_TIMESTAMP_TO_BP_TIME'
EXPORTING
    BP_GUID_32         = ls_data-item_guid
    IM_TIMESTAMP       = ls_service_assign-END_TSTMP
IMPORTING
   EX_DATE            = lv_end_date.
*   EX_TIME            =
if sy-subrc = 0.
ls_data-ZZITM_ENDDT = lv_end_date.
endif.
endif.
endif.

Can not get data from database

hi all,
    there is a problem , when i write like below :
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
          WHERE bukrs = p_bukrs
            AND hkont = p_hkont.
p_bukrs , p_hkont are all on the selection screen , and p_bukrs = 1200 another is eq blank. i can not find any data , but with the same condition i can find some data in database , when i debeg i found that p_hkont is initial.
    when i write like this :
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
          WHERE bukrs = p_bukrs .
this time i can find the data like the database.
    so , does someone know where the problem is , why i can not get data ?
kind regards
kevin

hi,
if u r using bukrs and hkont as parameters in selection screen then
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs = p_bukrs
AND hkont = p_hkont.
this will work.
if u r using then as select-option then the above does n't work.
bcoz select-options work as internal table bcoz of that u have use the query like this
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs IN p_bukrs
AND hkont IN p_hkont.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Edited by: Alvaro Tejada Galindo on Aug 15, 2008 5:25 PM

RFC not getting data from XI

hi,
in my scenario, XI is passing the data back to RFC, but in my program where i call the RFC, the data is not received. what could be the issue.
CALL FUNCTION 'ZFFF' DESTINATION 'XI'
TABLES
       INP   = aaa
       OUT1 = bbb
       OUT2 = ccc.
COMMIT WORK.
it was working fine before when i had only OUT1. Later I added OUT2 and then onwards I am not getting data for any of the tables. I have checked in XI, data is being passed out of XI to RFC. No issues in that.
something seems to have gone wrong in the RFC modfication or the RFC call. can anyone please help.
thks

Hi,
Check the export import parameter declarations & data types in both RFC & XI.
Put a break point in RFC & check whether it is getting triggered.
Best regards,
Prashant

How to update info cube from PSA

Hi,
how to update Info cube from PSA.
Coz we have changed the update rule for one characteristic.What is the implication of updating it from the PSA.
Regards,
Viren.

Hi,
Now there is one more problem in update rule.
We are using " 2LIS_03_BF " as datasource.which doesn't contain Sales organization,Division or Distribution channel.
So in transfer rule for the infosource "2AF_MM_INV_1" we can not update the salesorg,division and Distribution channel.In communication structure all these objects are assigned to respective info objects.
Now in Update rule we have kept Division and Sales organization as initial.Still we are getting correct data for the Division and not a single record contains Sales organisation and for distribution channel we are using update routine..
SELECT SINGLE DISTR_CHAN INTO DISTR_CHAN
FROM /BI0/MCUST_SALES WHERE DIVISION = COMM_STRUCTURE-DIVISION
AND SALESORG = COMM_STRUCTURE-SALESORG
AND CUST_SALES = COMM_STRUCTURE-CUST_SALES.
Now my problem is this update rule fatches record on the basis of cust_sales only as comm_structure doesn't contain any thing for division and sales org.So how to get value for sales org and Division in Communication structure.
Summary, I want to get data for Distribution channel and sales org in my cube.
Pls help me out...
This is very urgent..
Regards,
Viren.

Not getting data for 1 field in ODS

Hi BW Experts,
I am loading the data from R/3 to BW.I have loaded the data through PSA.The data is available in New data field. After activating the ODS, for 1 field the data is not uploaded and in the report, the values are not displaying.
I have checked the Transformations also. it is mapped correctly.But still i am not getting data for that field.
Thanks,
Siva.

Thanks for the Update
1. What is your Service Pack Level?
Service Pack is 0016
2. Are you able to see the data in PSA?
   Yes I can see the data in PSA
3. After load, are you able to see the value in New table?
   Yes i can able to see the data in New data table
4. Anywhere, are you doing the SORTING of Data Package?
   No I have not sorted the data Package.I have not written any coding on this
I have not written any coding in transformation also.
Thanks,
Siva.

Not getting data in Dimension

Hi all,
i am craeating a dimension and i did the mapping also.i get the data in that dimension table.But i am not able to get the data in the Dimesion (i.e When i right click on the dimesion which i have created,there one option is called Data Viewer,from that i am not getting data)
Can any help me about this.

Hi,
Just try with the code given below... hope that helps you out....
also write a break-point statement just before the if statement and check in the debugging mode if it i_mseg table has some values or not...
if i_mseg[] is not initial.
select zzlcno zzlcdt
into i_ekpo from ekpo
for all entries in i_mseg
where ebeln = i_mseg-ebeln.
    append i_ekpo.
endselect.
endif.
      OR
if i_mseg[] is not initial.
select zzlcno zzlcdt
into corresponding fields of i_ekpo from ekpo
for all entries in i_mseg
where ebeln = i_mseg-ebeln.
    append i_ekpo.
endselect.
endif.
Regards,
Siddarth

Not getting data for Null Records.

Hi all,
I am trying to fetch the records where sczuo values are NULL .
DATA : BEGIN OF itab OCCURS 0.
INCLUDE STRUCTURE makz.
DATA : END OF itab.
SELECT * FROM makz INTO TABLE itab WHERE sczuo IS NULL.
IF sy-subrc EQ 0.
LOOP AT itab.
WRITE : /3 itab-matnr , 20 itab-sczuo.
ENDLOOP.
ENDIF.
I did not getting data any data .But if i write select statement like this
SELECT * FROM makz INTO TABLE itab WHERE sczuo = ' '.
This select statement returns the correct data.
why my first select statement is not working ? how can i use IS NULL?
Thanks in Advance,
Madhu

Hi,
When we insert a new field to an existing table, NULL values are automatically inserted into the new field by the system for all existing records. However NULL and SPACE are not the same.
The logical expression SQL condition is either "true, false, or unknown". The expression is UNKNOWN if one of the columns involved in the database contains a NULL value and such records could be retrieved by using u201CIS NULLu201D instead of SPACE.
Please note that the NULL value is inserted only for the existing records, by the time the new field is being inserted. For all new records, SPACE or the initial (default) value is inserted.
If the new field is inserted by checking the checkbox u201Cinitial valuesu201D, then the initial values (SPACE in case of characters) are automatically inserted and not the NULL values.
ihope u get the solution...
Thanks
Ashu

About not getting value in wa_vbap from it_vbap.

REPORT ZSIMPLEALV.
TABLES: VBAK, VBAP, SSCRFIELDS.
TYPE-POOLS: SLIS.
TYPES: BEGIN OF TY_VBAK,
       VBELN TYPE VBAK-VBELN,
       BSTDK TYPE VBAK-BSTDK,
       KUNNR TYPE VBAK-KUNNR,
       END OF TY_VBAK.
TYPES: BEGIN OF TY_VBAP,
       VBELN TYPE VBAP-VBELN,
       POSNR TYPE VBAP-POSNR,
       MATNR TYPE VBAP-MATNR,
       KWMENG TYPE VBAP-KWMENG,
       VRKME TYPE VBAP-VRKME,
       ARKTX TYPE VBAP-ARKTX,
       WERKS TYPE VBAP-WERKS,
       NETPR TYPE VBAP-NETPR,
       END OF TY_VBAP.
TYPES: BEGIN OF TY_FINAL,
       VBELN TYPE VBAK-VBELN,
       BSTDK TYPE VBAK-BSTDK,
       KUNNR TYPE VBAK-KUNNR,
       POSNR TYPE VBAP-POSNR,
       MATNR TYPE VBAP-MATNR,
       KWMENG TYPE VBAP-KWMENG,
       VRKME TYPE VBAP-VRKME,
       ARKTX TYPE VBAP-ARKTX,
       WERKS TYPE VBAP-WERKS,
       NETPR TYPE VBAP-NETPR,
       END OF TY_FINAL.
DATA: IT_VBAK TYPE TABLE OF TY_VBAK,
      WA_VBAK TYPE TY_VBAK.
DATA: IT_VBAP TYPE TABLE OF TY_VBAP,
      WA_VBAP TYPE TY_VBAP.
DATA: IT_FINAL TYPE TABLE OF TY_FINAL,
      WA_FINAL TYPE TY_FINAL.
DATA: IT_CATLOG TYPE SLIS_T_FIELDCAT_ALV,
      GT_SORT   TYPE SLIS_T_SORTINFO_ALV,
      WA_CATLOG TYPE SLIS_FIELDCAT_ALV,
      GS_LAYOUT TYPE SLIS_LAYOUT_ALV.
SELECTION-SCREEN BEGIN OF BLOCK B1 .
SELECT-OPTIONS: PO_DAT FOR vbak-bstdk.
SELECTION-SCREEN END OF BLOCK B1 .
START-OF-SELECTION.
PERFORM GET_DATA_FROM_VBAK.
PERFORM GET_DATA_FROM_VBAP.
PERFORM WRITE_DATA_TO_FINAL.
END-OF-SELECTION.
PERFORM SHOW_DATA.
*&      Form GET_DATA_FROM_VBAK
      text
--> p1        text
<-- p2        text
FORM GET_DATA_FROM_VBAK .
SELECT VBELN BSTDK KUNNR
    FROM VBAK
    INTO TABLE IT_VBAK
    WHERE BSTDK IN PO_DAT.
ENDFORM.                    " GET_DATA_FROM_VBAK
*&      Form GET_DATA_FROM_VBAP
      text
--> p1        text
<-- p2        text
FORM GET_DATA_FROM_VBAP .
SELECT VBELN POSNR MATNR KWMENG VRKME ARKTX WERKS NETPR
FROM VBAP
INTO TABLE IT_VBAP
FOR ALL ENTRIES IN IT_VBAK
WHERE VBELN = IT_VBAK-VBELN.
ENDFORM.                    " GET_DATA_FROM_VBAP
*&      Form WRITE_DATA_TO_FINAL
      text
--> p1        text
<-- p2        text
FORM WRITE_DATA_TO_FINAL .
REFRESH IT_FINAL.
LOOP AT IT_VBAP INTO WA_VBAP WHERE VBELN = VBAK-VBELN.
       WA_FINAL-VBELN = WA_VBAP-VBELN.
       WA_FINAL-POSNR = WA_VBAP-POSNR.
       WA_FINAL-MATNR = WA_VBAP-MATNR.
       WA_FINAL-KWMENG = WA_VBAP-KWMENG.
       WA_FINAL-VRKME = WA_VBAP-VRKME.
       WA_FINAL-ARKTX = WA_VBAP-ARKTX.
       WA_FINAL-WERKS = WA_VBAP-WERKS.
       WA_FINAL-NETPR = WA_VBAP-NETPR.
IF SY-SUBRC IS INITIAL.
READ TABLE IT_VBAK INTO WA_VBAK WITH KEY VBELN = WA_VBAP-VBELN.
       WA_FINAL-VBELN = WA_VBAK-VBELN.
       WA_FINAL-KUNNR = WA_VBAK-KUNNR.
ENDIF.
   APPEND WA_FINAL TO IT_FINAL.
    CLEAR: WA_FINAL, WA_VBAP, WA_VBAK.
ENDLOOP.
ENDFORM.                    " WRITE_DATA_TO_FINAL
"tell me anybody 'why am i not getting value in wa_vbap from it_vbap?.

Hello Mr:Sardar,
There are a lot thinks we need to notice while writing a report.
First of all VBAP is an item table and VBAK is a header table. For each header data there can be multiple item data. So your report should loop over header data first
Let it be
loop at it_vbak into wa_vbak.
endloop.
Now wa_vbak will contain one header data, for this header there can be more than one item data in vbap.
now the code will become
loop at it_vbak into wa_vbak.clear wa_vbap.
loop at it_vbap into wa_vbap where vbeln = wa_vbak-vbeln.
wa_final-vbeln = wa_vbak-vbeln.
append wa_final to it_final.
endloop.
endloop.
Another thing u must take care of is that while u are using FOR ALL ENTRIES in your select statement, check whether this itab is initial or not.If itab is initial program will fetch all the data irrespective of conditions. Please read F1 help for for all entries.
Hope this will help you.
Regards,
Antony Thomas

Not getting data into 3rd int table

Hi all,
         here i ve data in 2 internal tables. this data i want store into 3rd internal table, here am adding with inner join but am not getting data into 3rd one.
plz check my logic.
REPORT ZEXCHANGE_RETES                         .
TABLES : tcurr,           " Exchange Rates
         /msg/rabr.       " Account (Posting Headers)
DATA : l_date type datum.
TYPES : begin of t_tcurr,
        kurst like tcurr-kurst, " Exchange Rate type
        fcurr like tcurr-fcurr,   " From Currrency
        gdatu like tcurr-gdatu,   " Date as of which
    end of t_tcurr.
TYPES : begin of t_rabr,
        OW_WHGNR like /msg/rabr-OW_WHGNR,
        bil_dat like /msg/rabr-bil_dat,
        abrnr like /msg/rabr-abrnr,
       end of t_rabr.
TYPES : begin of t_output,
        kurst like tcurr-kurst,
        fcurr like tcurr-fcurr,
        gdatu like tcurr-gdatu,
        OW_WHGNR like /msg/rabr-OW_WHGNR,
        bil_dat like /msg/rabr-bil_dat,
        abrnr like /msg/rabr-abrnr,
       end of t_output.
DATA : it_output TYPE STANDARD TABLE OF t_output WITH HEADER LINE,
        wa_output TYPE t_output.
DATA : it_rabr TYPE STANDARD TABLE OF t_rabr WITH HEADER LINE,
        wa_rabr TYPE t_rabr.
DATA : it_tcurr TYPE STANDARD TABLE OF t_tcurr WITH HEADER LINE,
        wa_tcurr TYPE t_tcurr.
getting data into 1st itab
SELECT kurst fcurr gdatu
          from tcurr into table it_tcurr
          where kurst EQ 'M'.
          SORT it_tcurr by fcurr GDATU DESCENDING.
          delete adjacent duplicates from it_tcurr comparing fcurr.
getting data into 2nd itab
   SELECT * FROM /msg/rabr into CORRESPONDING FIELDS OF TABLE it_rabr.
    SORT it_rabr BY OW_WHGNR bil_dat abrnr.
getting data into 3rd itab
SELECT t~kurst
        t~fcurr
        t~gdatu
        r~OW_WHGNR
        r~bil_dat
        r~abrnr
        FROM tcurr as t INNER JOIN
        /msg/rabr as r on tfcurr EQ rOW_WHGNR into table it_output
        WHERE rabrnr BETWEEN '00000000000000800251' AND '00000000000000800300' AND rbil_dat < wa_tcurr-gdatu.
printing output
LOOP at it_output into wa_output.
WRITE: /10 wa_output-kurst,
         15 wa_output-fcurr,
         25 wa_output-gdatu,
         50 wa_output-OW_WHGNR,
         60 wa_output-bil_dat,
         80 wa_output-abrnr.
ENDLOOP.
here am not getting data into 3rd i tab.
Thanks & Regards,
sudharsan.

Hi,
The select command is the most fundamental function of writing ABAP programs allowing the retrieval of data from SAP database tables.
Try filling the 3rd internal table with Loop ... Endloop.
Loop at t_tcurr.
Read table t_rabr with key field1 = t_tcurr-field1.
If sy-subrc = 0.
Move t_tcurr-field1 = itab_final-field1.
Move t_tcurr-field2 = itab_final-field2.
Move t_rabr -field3 = itab_final-field3.
Move t_rabr -field4 = itab_final-field4.
Append itab_final.
Endloop.
Hope this helps you.
Regards,
Ruthra

No Mail. I can not get or send mail from my iPhone,iCloud, or mail on the desktop. Password is correct i can get into iCloud but not able to get mail.

I can not get or send mail from my iPhone, iCloud, and desktop mail. All are the same account, password is right and working. When the problem first happened I updated to a new password.
The Mail and the phone are telling me ( "The iCloud IMAP server “p99-imap.mail.me.com” rejected the password for user “k****n******2”}
From the iCloud account i get a message saying mail could not be loaded and the details. Which i have copyed below.
Any thoughts or anyone I can ring ? This was a paid for mobile me account.
Thanks
Running 10.72
ORIGIN
server
TYPE
error
BUILDNUMBER
1FCS29.34215
TIME
Sun Dec 11 2011 10:49:50 GMT+0000 (GMT)        (1323600590380)
HOST
www.icloud.com
USERAGENT
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_2) AppleWebKit/534.52.7 (KHTML, like Gecko) Version/5.1.2 Safari/534.52.7
PRSID
217870346
RECENTLOGMESSAGES
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: MAIL in main()
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: --> Request 1:   POST to https://p99-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: Request out: /wm/preference-list-->1323600562085/1
          params: {"locale":"en-us","timeZone":"Europe/Dublin"}
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Object:sc1074:dispatch('load content')
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Module: Attempting to load 'addresses'
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Module: Module 'addresses' is not loaded, loading now.
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Module: Loading JavaScript file in 'addresses' -> '/applications/mail/frameworks/addresses/en-us/1FCS29/javascript.js'
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Object:sc3099:initStatechart()
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: -> entering "9 Address List Not Visible"
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: --> Request 2:   GET to https://p03-contactsws.icloud.com:443/co/addressbook/?order=first,last&locale=en _US, headers: Content-Type=text/plain, body: (omitted)
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Module: Module 'addresses' finished loading.
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Module: Evaluating and invoking callbacks for 'addresses'.
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Module: Module 'addresses' has completed loading, invoking callbacks.
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: APPLICATION: Received applicationWillBecomeActive
Sun, 11 Dec 2011 10:49:23 GMT: WARN: APPLICATION: Received applicationDidBecomeActive
Sun, 11 Dec 2011 10:49:23 GMT: DEBUG: <-- Response 2: 200 (1257ms), headers: Cache-Control=no-cache, no-store, private, Content-Type=application/json; charset=UTF-8 body: (omitted)
Sun, 11 Dec 2011 10:49:25 GMT: DEBUG: willReceive: Status:500, Request:/wm/preference
Sun, 11 Dec 2011 10:49:25 GMT: DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:1
Sun, 11 Dec 2011 10:49:25 GMT: DEBUG: --> Request 3:   POST to https://p99-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Sun, 11 Dec 2011 10:49:25 GMT: DEBUG: Request out: /wm/preference-list-->1323600562085/1
          params: {"locale":"en-us","timeZone":"Europe/Dublin"}
Sun, 11 Dec 2011 10:49:29 GMT: DEBUG: willReceive: Status:500, Request:/wm/preference
Sun, 11 Dec 2011 10:49:29 GMT: DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:2
Sun, 11 Dec 2011 10:49:29 GMT: DEBUG: --> Request 4:   POST to https://p99-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Sun, 11 Dec 2011 10:49:29 GMT: DEBUG: Request out: /wm/preference-list-->1323600562085/1
          params: {"locale":"en-us","timeZone":"Europe/Dublin"}
Sun, 11 Dec 2011 10:49:33 GMT: DEBUG: willReceive: Status:500, Request:/wm/preference
Sun, 11 Dec 2011 10:49:33 GMT: DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:3
Sun, 11 Dec 2011 10:49:33 GMT: DEBUG: --> Request 5:   POST to https://p99-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Sun, 11 Dec 2011 10:49:33 GMT: DEBUG: Request out: /wm/preference-list-->1323600562085/1
          params: {"locale":"en-us","timeZone":"Europe/Dublin"}
Sun, 11 Dec 2011 10:49:37 GMT: DEBUG: willReceive: Status:500, Request:/wm/preference
Sun, 11 Dec 2011 10:49:37 GMT: DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:4
Sun, 11 Dec 2011 10:49:37 GMT: DEBUG: --> Request 6:   POST to https://p99-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Sun, 11 Dec 2011 10:49:37 GMT: DEBUG: Request out: /wm/preference-list-->1323600562085/1
          params: {"locale":"en-us","timeZone":"Europe/Dublin"}
Sun, 11 Dec 2011 10:49:40 GMT: DEBUG: willReceive: Status:500, Request:/wm/preference
Sun, 11 Dec 2011 10:49:40 GMT: DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:5
Sun, 11 Dec 2011 10:49:40 GMT: DEBUG: --> Request 7:   POST to https://p99-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Sun, 11 Dec 2011 10:49:40 GMT: DEBUG: Request out: /wm/preference-list-->1323600562085/1
          params: {"locale":"en-us","timeZone":"Europe/Dublin"}
Sun, 11 Dec 2011 10:49:44 GMT: DEBUG: willReceive: Status:500, Request:/wm/preference
Sun, 11 Dec 2011 10:49:44 GMT: DEBUG: <-- Response 7: 500 (4248ms), headers: Content-Type=text/html body: (empty)
Sun, 11 Dec 2011 10:49:44 GMT: DEBUG: Request in: /wm/preference-list-->1323600562085/1,500,4249ms
Sun, 11 Dec 2011 10:49:44 GMT: DEBUG: ServerPreferencesDataSource.retrieveResponse error = -1/500/guid=serverPrefsGuid
Sun, 11 Dec 2011 10:49:44 GMT: ERROR: CoreMail handled error 13002 before exiting Mail

Spent at least 40 min talking to apple support, to sort it out. luckly not at my cost. After trying lots of things and speaking to a higher grade support person I was given a temp password which did the trick. I then was able to reset that with my own password.
The impression i got was no one knowns what the problem is and resetting the password at the apple end works. Not sure if you would be able to self fix.

SMC not getting suggested patch info from Update Manager in Solaris 10

Hi All,
why SMC not getting suggested patch info from Update Manager in Solaris 10??
Thank you in advance.

Hi All,
why SMC not getting suggested patch info from Update Manager in Solaris 10??
Thank you in advance.

Still can not get songs to delete from library.....

I have read through the forums..made sure to try every option available..still I can not get songs to delete from library. Help!!

I am assuming you have tried all the obvious ones, delete key, right-click -> delete, Edit -> Delete, etc. Are you getting an error message when you try to delete? Are you just trying to delete from the library or delete the file as well?

About a year ago we purchased a used macbook pro and can not get music to transfer from iPhones to mac

about a year ago we purchased a used macbook pro and can not get music to transfer from iPhones to mac

how can i get All music transferred? even non purchased

Not getting data in cube from PSA.

Similar Messages

Maybe you are looking for