Not getting delta master data after refresh

Hello,
We have just refreshed our QA (BW and R/3) environments from our production environments. It was a synchronized restore. We have done this multiple times in the past and have not run into this problem before.
Everything checks out fine - full master data loads fine, and delta transaction data loads fine, but our master data loads that are deltas retreive no data and produce the following message:
Selection conditions replaced by last init. selection conditions
Message no. RSM1036
Diagnosis
Selection conditions replaced by init. selection conditions.
No new selections can be made when requesting delta data from a 2.0 extractor.
Delta selections are composed of the total quantity of all the selections of all the sucessful init. requests for this DataSource.
I have looked this up here and in OSS. What I have found would indicate that we have multiple inits. However, when I look at the Initialization Options for Source System from within the infopkg, there is only one. Also, RSA7 appears to be fine on R/3.
Is there table or setting that may have been missed or some other place I need to check?
Any ideas or suggestions would be appreciated.
Thanks,
Kelley

Thanks, but I do not understand what exactly to look for in that table. What fields in that table should I check and for what?
I have compared rssdlinit on BW with roosprmsc on R/3 and they match. I have checked other tables too and they look fine.
There was a mistake made when the system was refreshed that may have caused this problem. That would at least explain why we are having this problem now and did not before.
I tested one of our delta master data objects (0material_text). I deleted the init from within the infopkg. Then I ran the infopkg to init with no data transfer. That appeared to work - resulting in 1 record which is normal for an init delta with no data. Then changed material text on R/3 and ran the infopkg with delta update. It still gave the same message that I listed in my first post, and it retrieved 0 records.
Any ideas?
Thanks,
Kelley

Similar Messages

How to not getting record in table after refreshing my page?

Hi,
I am using jdev 11.1.1.2.3
My problem is,.. i am performing deleting operation my table for deleting record in that time it is deleted,
But in my problem is after refreshing the page record is coming back.
I am performing delete operation using bindings
can any one help me..
Thank You..

Hi,
Actually i create global components insert delete,commit,first,next these all are icons in my template page
when i am using any master table click on those icons i perform operations
for bindings
insert:#{backingBeanScope.AdminCountryBean.addNewCountry}
savecall:#{AdminMainActionBean.pofAdminAction}
cancelcall:#{bindings.Delete.execute}
For inserting and saving i write bean class deleting i am not following any programmatic approach....

Payroll period does not correspond to master data error in INLK run & soln

Dear All,
Just wanted to share this Issue and solution which i found after debugging.
I am not sure it is 100% correct.
I am working on indian payroll and was doing lagacy data transfer with INLK schema
i was used to get error '2 payroll period does not correspond to master data'
and this was for only new joinees in that period .what i found out after debugging is
for e.g. employee is hired in 03.06.2011 .and record in t558b is
90300035 1 2011 1 2011 3 01.06.2011 31.06.2011
where 01.06.2011 is a for period begin date ,
now in payroll program this is being checked with joining date in following subroutine check_aper_versus_t558b
so it ends up with above error.now if i go and change 01.06.2011 to 03.06.2011 in T558B then payroll will be successful.
I dont no whether this is right approach but this removed that error.Just wanted to share so
It might help the members.

la diferencia es la fecha del campo FPBEG que debe ser la fecha para los empleados que no esten con el año o periodo completo
the difference is the date field FPBEG Table T558B to be the date for employees who are not full with the year or period

How can i get back my data after i restored my iphone and accidentally created a new iphone ac.

how can i get back my data after i restored my iphone and accidentally created a new iphone ac.
it did a back up when i started my restored iphone and i cant retrieve my previous backup while i didnt back up on icloud....
the new ac is actually the same apple id as the one i used. I lost all my contact, photos and data of whatsapp...
what can i do...help!

I don't know if this is a similar problem but I wrote 2 notes yesterday on my iphone. I opened my mail to print them and they appeared as notes but wouldn't load. Then I looked at them on my iphone and I could see the notes but they quickly updated to blank with a time of the last edit the same time I tried opening them on my computer.
Yesterday I updated to 4.3.4 I don't know if somehow that affected them. Are they stored somewhere else. Can I get them back?

RFC does not get the updated data

Hi Experts,
I am not getting the updated data via RFCs.
The scenario is like this.
Step 1: I open the Application running on System "B".
Step 2: I add a record in second Application which is on system "A".
Now I want the same data to be reflected on Application running on System "B" on some event.
I observed the data is never reflected in Application running on System "B", but when I refresh the page of this Application, I get the updatred data. Do you have any clues why this is happening.
Best Regards,
Arti.

Hi,
Can you be bit more clear about the requirement. It is logical that without refresh updated data wont be shown.
Thanks,
Vinod.

Iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro

iphone 4s not getting detected in macbook after connecting via usb cable, also photos taken in iPhone not showing in macbook pro

Thanks. I realises that i will hv to go to iphoto to see the photo. Its now working !!!!!

"Could not get the audio data from the file" error

Hi
I get a lot of "Could not get the audio data from the file" errors when opening a project. Sometimes they crash Premiere Pro CC 7.01 (Mac). But if not Premiere works as usual, with the audio.
I tried to convert the audio files (coming from Audition) from 32 to 16 bit. It worked while opening a project once, but not the following times.
Where can it come from ?
Edit: I also get this error when importing audio: "Error: Premiere Pro version 7.0 is not compatible with the Premiere Pro Plug-in version 5.7.4". Maybe it is connected.

Got it! It was the Smartsound plugin making trouble. Got rid of it and no more errors.

I bought a movie on iTunes and it plays half the movie and stops. I can not get it to play after it stops. What can I do to get it to play the rest of the movie?

I bought a movie on iTunes and it plays half the movie and stops. I can not get it to play after it stops. What can I do to get it to play the rest of the movie?

Hi, Jjenjen30.
Thanks for the question and I believe we have a solution. The best option would be to delete the movie that is giving you an issue and redownload it via the iTunes store past purchase option. I have included a couple articles that will show you how to process these steps.
Deleting files from the iTunes library and your computer
http://support.apple.com/kb/ht3842
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
If this does not resolve the issue, then iTunes might need to be notified to let them know there is a problem with the content. I have included the steps on how to let them know.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
Cheers,
Jason H.

MRM1- transportation is not define for master data

Hi Expert!
i try to set up condition records for consignment order type -KONS. But system has given me this message "transportation is not define for master data". Can anyone tell me is it normal? Or is there anything else i have to set up? Please guide me from here. I have to set up MRM1 in order to allow me to do MRKO.
Thanks.

MRM1 is a customizing transaction, however conditions are master data.
This message just tells you that you cannot transport your records from developement system to a production system, as it is usual for other customizing entries.

Anyone not get the camera shortcut after updating to ios 5?

anyone not get the camera shortcut after updating to ios 5?

Tried double pressing the home button when on lock screen?

Table not showing data after refresh

Hi gurus ,
A unique problem We have added a field in the custom table . once moved to quality system it is not showing up the data whwn when we do a select query on that table in se16 . say total entries are ten thousand four of them are checked and when display not checked i.e eq space we get just 100 entries on number of entries ..i asked to regenerate the table in quality system but it did not help .The Quality system was refresh 1 month ago and we see it not working after it ..please suggest the correct steps we need to perform to recover the data . Adjust database with keep data has already been done ...

Hi Anjaneya Bhardwaj,
If I understand well, your issue is that you have a SELECT in your program, saying newfield is your newfield, something like:
SELECT ... FROM ztable INTO ... WHERE newfield = space.
and it doesn't return the records that existed in quality before newfield was added.
It it because, by default, when you add a field to an existing database table, with records already present, they are assigned the NULL value, which is different from space.
They can be retrieved using WHERE newfield IS NULL.
Usually, to avoid this issue, when we add a new field, we tick the "no null value" checkbox for this new field, in SE11 transaction. That will initialize the field of existing records, to the initial value (space for characters, 0 for numeric fields, etc.) Note: maybe it can be counter performant for big tables...
Solution for your issue, run this code once:
UPDATE ztable SET newfield = space WHERE newfield IS NULL.
BR
Sandra

I get email already in use and I do not get confirmation emails even after master reset when trying to sync

I have tried all of the options in your support pages . I am not getting emails in order to reset my email. I did a master reset and it still tells me that my "new" email is in use. I do not get emails regarding recovery key change because the email stays the same . I can log in to your normal support page and I have just changed that password - that worked . . I assume that this password is not my master one . . When I did a master reset, where do I go or what do I do after that??
Struggling now for several hours . . .

This page does not help . . When I try to get a new key, it asks for me to log in - email address ok, but incorrect password. Request new password . . no email back to enable me to re-set.
I have tried a master reset . . that does not help either . .

Deleting master data after loading transactional data using flat file

Dear All,
I have loaded transaction data into an infocube using a flat file . While loading DTP i have checked the option "load transactional data with out master data exists" . So transactional data is loaded even if no master data is there in BW.
While loading the flat file, I made a mistake for DIVISION Characteristic where original master data value is '04000' , but i loaded the transactional data with value '4000' .Then i later realized after seeing the data from the infocube and deleted the request. then i reloaded data with value '04000'. Till now every thing is fine.
But when I see the master data for DIVISION , i can see a new entry with value '4000'.
My question is how to delete the entry value '4000' from DIVISION. I tried deleting manually this entry from 'maintaining masterdata' , but it is not allowing me to do so .
I have also checked if any transactional data exists for that value '4000' , as i said earlier I have deleted the transactional data with that values. even tried to delete the entries from the master data table, but i donot see a option to delete entries there.
Please suggest me on this.
Regards,
Veera

Hi,
Goto RSA1 right click on the Info object and select Delete Master data. This will delete the master data unused existing in the table.
If this master data is not used any where else just delete the master data completely with SID option.
If even this doesnt work you can delete the complete table entire in SE14. But this will wipe out the entire table. Be sure if you wanna do this.
Hope this helps
Akhan.

Tax classification fields are not appeared in master data

Dear Experts,
I searched the forum about my issue but i did not get any solution.
I am not able to see the tax classification fields in customer master and material master.Even i assigned Country IN to JLST and JCST condition types by T-code OVK1.
FYI
I have copied the org elements from standard (which are already given by default).Initially i was able to see 2 different countries with tax MWST in both customer master and material master.
EX:
AT MWST
DE MWST
But i do not wanted these. so i deleted these assignment from OVK1 and assigned country IN to JLST and JCST,and i went to customer master and material master but those fields are not appeared.
Note:Country of plant,company code and sales organizations is IN
Help me to view tax classification fields in Master data.
Thanks&Regards
Ravikumar.R

Then how system knows this customer is liable for JLST.
In customer master, under the Taxes tab, it would be like
Country::::Name:::::Tax Cat.::::Description::::Tax Classification
While creating customer master, if your configuration is in line with standard, then under the tab Tax category, you can see MWST flowing automatically. You just have to input tax classification as 1, 2 etc.,
Also since as you said above, you are maintaining the combination of country/plant region/customer region/customer tax classification/material tax classification, you can very well differentiate VAT & CST.
Wherever customer region comes as your plant region, assign VAT tax code and wherever, customer region differs from plant region, assign CST tax code in VK11.
G. Lakshmipathi
ps: please spell the name correctly

Updating customer master data after invocing

Hello Gurus,
Is there any procedure that after the customer is INVOICED or after the completion of billing the customer master data field needs to be updated.
Thanks in advance
sameer

hai gurus,
For the above question, is it possible to create a extra feild in customer sales tab.
sothat whenever the invoice is saved for bill to party,(the extra feild is for either sold tp party or bill tp party) that feild to going to update automatically.
Is it possible to get trasaction data to be displayed in customer master data, like the one in material master data, where stock valuation is going to update in accounting 1 veiw.
thanx in advance
sukumar

Not getting delta master data after refresh

Similar Messages

Maybe you are looking for