Not getting entries in SMQ1 and SMQ2
Hi,
I have implemented the concepts said in the below said blog.
/people/community.user/blog/2006/11/04/how-to-serialize-idoc-xml-messages-fed-into-xi
Still I'm not getting the entries in SMQ1 (R/3) and SMQ1(XI) systems.
Can any one tell me the problem in my case?
Regards,
Thiyagu
Hi,
>>>How to bring entries in SMQ1(ERP)? Currently I could see Queue name
as SAP_ALE_MYNAME in WE05(in help dialog box).
what can I suggest...
you wouldn't happen to have one of those:
www.sap-press.com/product.cfm?account=&product=H1935
queued IDOCs described in both ways XI - ERP and ERP - XI
with screenshots in my book
but basicalls you just need to specify queue name in WE20
and in receiver adapter case additionally queue processing in IDOC channel
that's all there is
>>>And I am using qRFC for this scenario.So, how can i see entries in SM58?
this was just to check if you actually configured if correctly and we're
talking about the same thing
Regards,
Michal Krawczyk
Similar Messages
-
Generation of Alerts for errors in SMQ1 and SMQ2
Dear Experts,
When messages get stuck in queue (SMQ1 / SMQ2) due to some error, we donu2019t get any alert notification (E Mail) from system. Normally we get below mentioned errors in SMQ1 or SMQ2.
1. Permanent error in BPE processing.
2. Error while accessing table.
Can you please suggest how do we generate alert notifications for the above errors in SMQ1 and SMQ2.
Thanks
Dhwani KamdarIf u have CCMS configured for your landscape, then it could be possible. Else its not possible in my opinion.
http://help.sap.com/saphelp_nw04/helpdata/en/8b/ceea3b31aac554e10000000a114084/frameset.htm
Regards,
Prateek -
I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.
Go to Settings > Privacy > Location Services.
Turn off SnapChat.
Go to Settings > Notification Center
Turn off SnapChat.
Restart the device.
Go to Settings > Privacy > Location Services.
Turn on SnapChat.
Go to Settings > Notification Center
Turn on SnapChat.
Test the issue. -
Schedule lines not getting confirmed on staurdays and sundays
Hi all,
At sales order level, the schedule lines are not getting confimred on staurdays and sundays. So,in the factory which has been assigned to that plant, we have checked all holidays . Even then it's not confirming on saturdaus and sundays.
In the factory calendar, it was maintained like this.
Valid from Year 1996
To Year 2010
Holiday calendar ID IN
Specific rule none exist
Work days
Moday to sunday have been ticked. Only public holidays have not been ticked.
even then staurday and sundays schedule lines are not getting confirmed. pLEASE ADVISE.Hi,
Go to T.CODE SCAL, select your calender id & click on definition.
Check the working days.Also check the "Holiday Calendar ID" assigned to the "Factory Calendar ID".
Check if it helps.
Regds........
Sumit -
I am not getting the upload poin and recipient feilds in the PO.
Hi Friends,
When i am converting a Purchase Order with reference to Purchase Requisition with account assignment cat = network and uploading point field data and recipient data and the item type D ,we are not getting uploading point data and recipient data.
for this i used BADI ME_PROCESS_PO
and the INTERFACE IF_EX_ME_PROCESS_REQ
I REALLY DONT NO HOW TO USE METHODS AND HOW TO WRITE A CODE IN THAT PLEASE HELP ME TO GET THE VALUES OF UPLOADING POINT AND RECIPIENT FIELDS DATA SHOULD POPULATE IN PURCHASE ORDER WITH RESPECT TO THA PURCHASE REQUISITION.
HELP ME WITH SUITABLE CODE FOR THE METHOD...
THANKS IN ADVANCE ........
UPENDAR GI would just like to add to Billy's remarks: PL/SQL exception management is not just a language function, it also affects the database itself.
If you "swallow" exceptions, you have defeated the language and you have probably also corrupted data.
Why do I say this? Because PL/SQL exceptions cause changes in the data to roll back. If you "swallow" the exception, whatever changes you made before the error happened will not be rolled back. This is a huge threat to transactional integrity.
Here is a demonstration:SQL> create table t(k number);
table T created.
SQL> begin
insert into t values(1);
insert into t values('a');
end;
Error starting at line 6 in command:
begin
insert into t values(1);
insert into t values('a');
end;
Error report:
ORA-01722: invalid number
ORA-06512: at line 3
01722. 00000 - "invalid number"
*Cause:
*Action:
SQL> select * from t;
NO ROWS SELECTEDYou see, the "correct" insert into table t was rolled back automatically. This ensures the "all or nothing" property of transactions called "atomicity".
Now look what happens if you "swallow" the exception:SQL> begin
insert into t values(1);
insert into t values('a');
EXCEPTION WHEN OTHERS THEN NULL;
end;
anonymous block completed
SQL> select * from t;
K
1The first insert is not rolled back, so if the calling program commits you will have changed data without respecting transaction boundaries. -
I have a ipod 5th gen and i changed my password because everyone knew it. I had forgotten it and now it is fully disabled. I can not get it online anymore and i have tried everything to get it restored. Please help as I am really worried
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
hi help unlock the phone happened after we installed a new programa we can not get the activation password and ID, I know and still does not stop the phone bought in Israel and what documents should be sent to confirm that my phone Please read through the help
What I am saying is ..........
The iPhone HAS to be active making calls on the UK carrier network for the carrier to identify as "theirs" and therefore eligible for the Carrier to unlock
The way to achieve this is to use a PAYG sim making and receiving calls to establish a customer relationship with the Carrier and then follow the Carrier's process to unlock
With a PAYG it usually means adding a specified (by the carrier ) amount usually £15 /£20 depending on the carrier
This is how O2 function and according to Gemma this is how Vodafone work -
i have an iphone 4 with 4.3.2 version, i want to upgrade the software. but my phone is not getting synchronised on itunes and not getting detected. also there is no update software tab under settings.please help me
If your phone isn't being recognized by your computer, you need to follow the steps in this article to resolve that
Also, some basic isolation needs to be done. Does it show up in itunes on any other computers? do you have other cords you can test with to see if it might be the cord? if the phone doesn't show up on any computers, it's likely your phone has a hardware issue
http://support.apple.com/kb/TS1538?viewlocale=en_US is the article to use if you want to concentrate on trying to get a particular computer to recognize your phone -
i can not get itunes to install and open on my new laptop i am so frustrated i uninstalled and reinstalled at least a dozen times in the last month
i got a error 7 this time but have had diff ones befpre please helpWill iTunes open in safe mode? Hold down CTRL+SHIFT as, or immediately after, you click the icon that starts iTunes and keep holding until you see this prompt.
Click Continue.
Assuming iTunes has opened, enable the menu bar, if necessary, with CTRL+B. Then go to Edit > Preferences > Store and untick Show iTunes in the Cloud purchases. Press OK, close iTunes, wait until it has had a chance to fully close then reopen.
Will iTunes open normally now?
If not, see Troubleshooting issues with iTunes for Windows updates for genral advice.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2
tt2
Message was edited by: turingtest2 -
Hi,
What is the use of SMQ1 and SMQ2 in the LO.
can some one please elaborate.Hi,
SMQ1 u2013 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 u2013 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
Check it
http://help.sap.com/saphelp_nw04/helpdata/en/76/e12041c877f623e10000000a155106/content.htm
Thanks
Reddy -
Hi Guru's,
is there any standard way to monitor SMQ1 and SMQ2, like i would like to know any std way to trigger email alert if the queue goes beyond 500 in number.
VinayHi there,
This should be possible through Business Process Monitoring in solution manager
http://service.sap.com/bpm > Media Library > Technical Information here you can find the setup guides.
Mark -
New to iPhone and iTunes. How do I sync and not get my kids songs and apps on my phone
Can someone tell me how to sync my iPhone 4 and not get my kids apps and songs on my phone
Don't select them to sync. It will only sync what you tell it to.
Open itunes, plug in iphone, go to each tab and select whatever you like, sync.
iPhone User Guide (For iOS 4.2 and 4.3 Software) -
I cannot install my ipod to my computer. Says something about the device driver. I did not get it new either and so have no info about it. And I have never used one before and have no friends who have either. Can someone help me?
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem -
Hi All,
We are using ISU and CRM system for Retail business, Always work flows and lot of business transactions will perform in those systems and replications will happen in both systems.
Due to this reason lot of entries are present in SMQ1, SMQ2 and SM58 will present. We are continuously monitoring though some times some entries are are found in sysfail status. due to this lot of entries are piled up and queues becomes very high amount.
As a work around, If we unlock the queue ( sysfail entry ) two to three times the entry will go and the remaining entries will start move.
Currently our requirement is can we do this kind of this as automated ? I mean as per conditions it will unlock the queues automatically ?
Please suggest me in this case.
Thanks in advance.
Pavan.Hi Dustin,
Thanks for your reply. I had gone through the mentioned notes and say about it is not recommended to use regular basis. Here our requirement is need to check the sysfail entries in the queue. Need to unlock the queue twice or thrice to re-process the entry. If any data issue our CRM middle ware team can handle.
The major purpose is to unlock the queue entries which can re-process automatically without manual correction.
I like to proceed with Deepanshu suggestion to check with ABAPer. before that I need to check with our CRM middle ware team to get the list of error which can process through unlocking the queue.
Will keep you posted the updates. Thanks a lot for your time and response.
Thanks,
Pavan. -
hi,
I have few delta queues running very fine in system.But I am bit
confused about tcodes smq1 and rsa7.If i am not wrong after running all jobs
( i.e. fetching data into BW ) entries in quesue must show 0.But it is not happening.
When will they become 0 or they never show as zero.
Thanks,
Prasanna N.HI,
If it is production system before upgrade get an outage of about 20 to 30 min and run Collective run jobs and move the delta queues from LBWQ to RSA7 and then to BI. As you are pulling the deltas during outage no posting will be there and you can leave the system for basis for outage.
It is mandatory to clean up the queues before giving the system for upgrade as during upgarde there may be possibility of queues being corrupted saying change in structures and it may raise issues during upgrade open queues are available.
Hence clean up the queue during outage ie lock all users for posting and do the activities.
Thanks,
Arun
Maybe you are looking for
-
Hi Can we find out the PO line items which have been deleted by user ? We can find out the deleted POs by using EKPO-LOEKZ, but how to track which user have been deleted. Thanks in Advance MBKM
-
Problem with printing logo in smartforms
Hi guys, we have a logo in a window, its working fine in print preview, however when printing the document its all black. The logo does not display, instead the window is blackened. Please advise.
-
HELP!!
-
03/28/2009 18:45:33 | root: Upgrade 6.1.3.3000-1 Start 03/28/2009 19:15:14 | root: Upgrade 6.1.3.3000-1 Failure 03/28/2009 19:15:14 CCMInstall|(CAPTURE) installFull rc[1]|<LVL::Debug> 03/28/2009 19:15:14 CCMInstall|(CAPTURE) installdb Failure [-i] 1|
-
AutoCompleteBox Popup sometimes opens automatically (when it shouldn't) and sometimes doesn't?
I have a bunch of AutoCompleteBoxes on a page that is in a Silverlight Frame. The boxes are in pairs. The first box select a Category and the second box's itemssource is bound to SubCategories for that selected Category. That all works fine. Selecte