Not getting generate option in Prd environment

Hi experts,
We are having an prod issue. THere were some changes move to prod for 1 object that lead to inconsistency in the data model .
When trying UCWB then we are getting data inconsistency problem. Usaully in dev when we have that issue we get the option of regenerate but in prod not getting that. Only check option is there.
How can we regenerate the Data Model to remove the inconsistency.
Thanks,
Murtuza.

This auth object access was missing :- FB_SRV_DMS .
Issue resolved.
Thank you,
Murtuza.

Similar Messages

Reports not getting generated

Dear All,
I know this is a repeat query but im unable to find information from the blogpost http://scn.sap.com/docs/DOC-41109.
I have earlier configured the WWI setup in a linux server. Now I am testing it on a windows server. I have made all the configurations in word and for generation server. The issue is, the report is not getting generated in report management screen and is in status Generation possible always.
When i check the wwi monitor, the doc type SBR is getting released but not getting completed. Please see the screenshot. CGSADM is working fine, RFC is working fine. I tried creating documents in CV01N and they are getting created. The DCOM settings are also good and activated the permissions there too. The DMS settings are set as per the SAP notes. However The job i scheduled is in status Finished for document generation. But when I try to generate the report, the report is created using a variant and the status of the report is in generation possible always. I checked the variant of the report and the validity is in REG_WORLD. I understand that there is some issue in the scheduled job.
I have scheduled only one job for Document Generation as follows.
a)Enter the job name - DOC GENERATION and choose a job class - A.
d) Choose Start condition and in the dialog box, choose After event.
e) Enter SAP_SYSTEM_START in the event field.
f) Activate Periodic job - HOURLY
g) Choose Check and save your entries.
h) Choose Step and choose ABAP program in the dialog box that appears.
i) Enter RC1WWIDS as the ABAP program name.
j) Choose Check and save your entries.
k) Before you leave the Define Background Job screen, you must save your entries once more.
Result: The job is started whenever the SAP system is started.
aFTER REPEATED ATTEMPTS, THE RESULT IS THE SAME AND NO CHANGE IN STATUS OF THE REPORT.
Kindly suggest what step am i missing . I have been through all the blogs in SCN. My old blogs are however missing and hence I am not able to access them.
I am using SAP GUI 7.30, ECC6 and EHP 5.
Regards
Dhinesh

Dear Dhinesh
Please help me to understand your system landscape.
a.) Did you have had a SAP EHS up and running together with a "linux server" based WWI version
and
b.) now you are switching the same SAP system to a "windows server" based version?
I am not sure about your screenshots. But you seem to have more than one gen server attached to the same system; did you updated as well WWI?
So no adaption of general SAP set up (like DMS etc.)?
Therefore any job scheduled (before afterwards) is done using a SAP account having the necessary access rights?
Can you please check this:
1.) create several sessions; one with WWi monitor and one with CG02; try to generate a different report for the same spec id (e.g. not MSDSUS in EN, but MSDS/FR) and check progress in WWI monitor as well as CG50
2.) select in CG50 the report in status "generation possible"; mark it and try to "go" on ; check access rights afterwards (su53)
I hate this status "generation possible". I believe you need to use "debug replace" to remove that entry; I can not remember any more but that was the only option to get "rid" of this entry
Please read WWI cookbook, There is a set up possible in such a way that any action on WWI server is "logged"; may be try to analyze the log file to get idea why there is no progress regarding the generation
PS: the problem you have detected is not related to the "validity area". It is a matter of communication issue between SAP and WWI server and the WWI process can not be finalized.
But you are not alone with your problem (e.g. check:
http://www.benxbrain.com/en/sap/program/RC1WWIDS-Generation-possible-status-not-changing-thread-1-1547841.htm)
http://scn.sap.com/thread/3311944
http://www.consolut.com/en/s/sap-ides-access/d/s/doc/H-ESEWSRSTAT
https://scn.sap.com/thread/1575223
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/ehs-wwi-processing-272462
Check as well your own thread: http://scn.sap.com/thread/3304285
C.B.
PS: may be check: http://www.stechno.net/sap-notes.html?view=sapnote&id=1094307
as well as:
http://www.stechno.net/sap-notes.html?view=sapnote&id=580586
PPS I: logging feature of WWI is described here: Note 778684
PPS II: may be check: http://www.stechno.net/sap-notes.html?view=sapnote&id=1094307
PPS II: may be check as well: http://scn.sap.com/thread/3344033
and http://scn.sap.com/thread/1381004

EAS Console - Not getting the option "Refresh security from Shared Services"

Hi,
In EAS Console 11.1.2.2, I am not getting the option "Refresh security from Shared Services" when I right click on Security (under Essbase Servers).
However, I can see this option via EAS Console 11.1.1.3 (current existing version).
Could you please let me know how can I get this option in EAS Console 11.1.2.2? Is this by any chance related to the option "Externalize Users"?
Thanks in advance.

Thanks a lot join for this information and your kind support .
One more question:
The owner of the Planning application is user 'hypadmin'.
I can see the SIDs of user 5001 a little different in both the versions. Is this ok?
Hyperion Planning 11.1.1.3 (Existing Environment)
USER_ID     SID ROLE SYNC_PSWD OFFLINE_ENABLED HUB_ROLES
50001          native://DN=cn=0fa19f8241602600:3b78a0e0:130926693d2:-78ba,ou=People,dc=css,dc=hyperion,dc=com?USER 3 2 0 5019
Hyperion Planning 11.1.2.2 (New Environment)
USER_ID     SID ROLE SYNC_PSWD OFFLINE_ENABLED HUB_ROLES
50001           native://nvid=54aec0428a3ba591:-44b7ca9b:13f03c114d2:-5d99?USER 3 2 4507
I have not yet performed "Externalize Users" yet in the new environment (11.1.2.2) throgh EAS Console. Is it required in the newer version 11.1.2.2?

IPC 5.0 API doc is not getting generated -: Note 809820

Hello friends,
I have setup development environment for IPC 5.0 on my machine.I used the information provided in PricingUserexitManualV102.pdf which is attached with SAP Note 809820. Everything looks set except for the fact that when i try to generate API documenation (*** <b>Activate the context menu (right mouse click) on
build_api_doc.xml and select Run As -> Ant Build</b> ***), then its not getting generated and i get the IOException. Please can some one guide me how to generate API docs?
Many Thanks,
Dipender Singh (Dips)

I have been able to resolve it. I just configured by path and java_home. ( it was done to setup installation of J2EE server slim edition). While doing this when i again tried to generate the docs it happened like .. as if using winzip.
Regards,
Dipender

Weblogic Access Logs not getting generated / updated only for Admin server

Hi All,
I have a query ,
We recently noticed that the weblogic access logs for our admin server are not getting generated.
However we checked that the access logs are getting generated for the managed servers that we have.
There is not much difference between the logging settings between the admin and the managed servers.
We thought that there might be some problem with the buffering and that the data might not be written to the files immediately.
So after researching we found the parameter "-Dweblogic.logging.bufferSizeKB=0" and added that to the java options however it did not make any difference.
Also we tried modifying the config script as ,
<server>
<web-server>
<web-server-log>
<buffer-size-kb>0</buffer-size-kb>
</web-server-log>
</web-server>
</server>
However no luck .....
We are using weblogic 9.2 MP3 and think there might be some bug with this version , however its hard to believe that the logs are generated and updated for managed servers and not for the admin servers.
The only thing we notice in the access logs of the admin server is 404 errors.
Any suggestions ?
Regards,
Stacey.

This has come up recently here:
access log not writing to disk in a timely fashion
I didn't find that buffer-size-kb capability in the docs in 9.2. I recommend checking with support.

Spool not getting generated in OO ALV report

Hi,
I developed a report in which we are giving output in same selection screen through OO ALV.
But,when we are scheduling that report in background,spool is not getting generated.
Waiting for your reply.
BR,
Praveen

Hi Aparna,
I tried NEW-PAGE PRINT ON.
I am pasting source code extract below:
   IMPORT DATA = ME->IT_FINAL2 FROM MEMORY ID SY-CPROG.
    FREE MEMORY ID SY-CPROG.
    CHECK ME->IT_FINAL2 IS NOT INITIAL.
    CHECK LO_DOCK IS INITIAL.
    CREATE OBJECT LO_DOCK
      EXPORTING
        REPID = SY-REPID
        DYNNR = SY-DYNNR
        RATIO = 70
        SIDE = CL_GUI_DOCKING_CONTAINER=>DOCK_AT_BOTTOM
        NAME = 'DOCK_CONT'.
    IF SY-SUBRC NE 0.
      MESSAGE 'Error in Docking Control' TYPE 'S'.
    ENDIF.
    IF LO_ALV IS INITIAL.
      TRY.
          LO_CONT ?= LO_DOCK.
          CALL METHOD CL_SALV_TABLE=>FACTORY
            EXPORTING
              LIST_DISPLAY   = IF_SALV_C_BOOL_SAP=>FALSE
              R_CONTAINER    = LO_CONT
              CONTAINER_NAME = 'DOCK_CONT'
            IMPORTING
              R_SALV_TABLE   = LO_ALV
            CHANGING
              T_TABLE        = ME->IT_FINAL2.
        CATCH CX_SALV_MSG.
      ENDTRY.
CLEAR LR_COLUMN.
      TRY.
          LR_COLUMNS = LO_ALV->GET_COLUMNS( ).
          LR_COLUMN = LR_COLUMNS->GET_COLUMN( 'KSCHL' ).
          LR_COLUMN->SET_LONG_TEXT( 'Cond.Type' ).
CATCH CX_SALV_NOT_FOUND.
      ENDTRY.
NEW-PAGE PRINT ON.
        LO_ALV->DISPLAY( ).
        NEW-PAGE PRINT OFF.
I am not getting spool list while executing it in background.
BR,
Praveen

MC.9 - spool is not getting generated

Hi Experts,
When i execute MC.9 transaction in foreground i am able to view the report output. but when i execute it in background spool is not getting generated.
Please provide me any solution for this issue.
Thanks
Pallavi

Hi
I have checked list of versions in the 'select version' button. But my question is when i select 'execute in background', it is not generated spool. Is there any relation between spool and version. If there is, please explain me what it mean and how it relates.
As i am new to this module i wanted to know it, in brief detailed.
Thanks
Pallavi

Transportation lane KEY not getting generated in the table

Transportation lane KEY not getting generated in the table
Hi folks,
The issue is like this :
We have a weekly workorders upload program from legacy systems to SAP-APO. The legacy planners send a .CSV file containing material-wise workroders. A customised zee program picks these quantities & writes them in Prod.planned keyfigures in SNP planning book. This process is done for the manufacturing locations only.
Lately workorders for two particular material M1 & M2 had failed to get upload. It gives the error 'NO VALID SOURCE OF SUPPLY COULD BE FOUND' in its Job log. We did some debugging & found that for successful materials the TRPID is getting generated in the table /SAPAPO/V_TRPROD whereas this TRPID is missing for M1 & M2. Why this is happening is our main concern. We tried deleting the PPM & creating this again, assuming that the PPMID is the precursor for generating this TRPID, but this yielded no results.
____ for successful upload______________
se16 --> /SAPAPO/V_TRPROD
Version = 000
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY of successfully loaded workorder
Enter
This gives the following results
TRPID = TRPID KEY
LOCFR = LOCID KEY for manufacturing location
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY for successfully loaded workorder
( This seems a self-lane, i.e both TO & FROM location are same)
____ for unsuccessful upload________
se16 --> /SAPAPO/V_TRPROD
Version = 000
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY for unsuccessfully loaded workorder
Enter
This gives the following results
Error = No Table entries found for specified KEYS
We are perplexed why this TRPID is not getting generated for these two particular material M1 & M2?
We have deleted their PPM & re-created them to cross-check if the PPMID KEY is the trigger for generating the TRPID key. This didn't work!
Please let us know in case someone faced a similar issue.
Many Thanks.
Kumar
Edited by: Blue Lotus on Jun 9, 2011 2:44 PM

Yes Anand.
We deleted the PPM & created it again, which didn't work.
Later on we deleted the product itself from APO & re-CIFed it from R3 & then re-created the PPM.
The PPMID which was missing earlier is now getting created! However no luck with the TRPID.
Why this TRPID is not getting generated in our only concern
Regards
Kumar

Schedule lines are not getting generated during MRP Run

Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
Can any one help me and suggest me what to be done in this case .
Thanks & Regards ,
Nirmalya

Dear,
Welcome to SDN,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
Regards,
R.Brahmankar

Proposals are not getting generated for BOM items in MD50

Hi Gurus,
I have maintained strategy 50 in MRP for header material , Item category gp as LUMF & maintained consumption parameters in material master .
For dependent requirements i have maintained BOM for production & sales usage, Strategy is blank as it is customer specific component , Item category gp is NORM , individual requirements i.e 1 in MRP 4 view.
MRP type is PD in both materials.
When i run a MRP thru' MD50 after getting customer order.
it is not planning my dependent requirements i.e. proposals are not getting generated for dependent requirements (BOM materials).
Please let me know the solution.
Thanx in advance
Regards,
Nagraj Vasmate

try to use strategy 20

TDS reversal entry is not getting generated at time of F-54

Dear All,
I have made down payment request through F-47 transaction code and down payment made by Transaction code u2013F110 (instead of F-48) and TDS is deducted at this point. There after I made invoice through MIRO / F-43 in which TDS is again deducted for whole invoice amount. I have cleared down payment through T.code F-54. But at this time TDS reversal entry is not getting generated and only customer account is credited and debited.
So in short TDS is getting deducted at time down payment and at time of Invoice for their respective full value.
Note: For TDS type on payment I have selected u201CCentral Invoice PROPu201D and we are not using business place and section code. Please help me.
Appreciate all expertsu2019 help ASAP.
Thanks ,
Manas kumar

Hai Manas,
If ur not using business place how can u get remitance chalana thats why first u can configure the business plance. I think ur already posted some entries its correct? In this case u will run this t.code business place update the previous entries i.e., J1INPP this is very useful to u
Regards
Madhu I

Task activities not getting generated properly in BPEL

I am using the Jdev 11g TP3 (from OTN). Installation went through fine. However I observed a interesting issue with HumanTask/BPEL and I was wondering if someone faced similar such problems before, if so, how to rectify the issue. Here is the description of the issue:
1. Created a Empty SOA composite project
2. Dragged and dropped BPEL Process in the component palette. Designed a Asynchronous process.
3. Dragged and dropped a HumanTask. Did not expose as an composite. Designed a single approver workflow. In the project schema, choose the schema from BPEL input.
4. Wired BPEL to HumanTAsk
5. In the BPEL flow, I dragged the HumanTask to the flow. Everything appears to be correct. I clicked on "Ok" after associating with BPEL variable.
Now when I examine the BPEL flow, a scope before the BPEL switch is empty. There are no BPEL activities generated. This is a very simple case of BPEL and HumanTask and I am not sure as to why the tasks not getting generated properly in BPEL flow.
Has anyone experienced this issue or any ideas as to why this could happen?

After going through the exercise several times, I finally found out the reason as to why the BPEL activities are not getting generated. In the Human task form for the title, since it is a fixed string in my case I put something like the one given below:
Title : "APPROVE ORDER"
When you have fixed string within double quotes it does not generate BPEL activities correctly. You can try and u will see the problem.
My real question is should not throw proper error message when you try to drag and drop the HumanTask to BPEL flow.

SQLloder scripts not getting generated for CLOBs

I am trying to migrate MYSQL 3.23 database into Oracle 8.1.7 and after creating the Oracle model and after converting the MYSQL text datatype into CLOB of the Oracle model the SQLloader scripts is not getting generated for CLOB datatypes. I mean the scripts are getting created but there is no change in the script for CLOB datatype.
The script generates the following for the table containing CLOB datatypes:
mysqldump -h <HOST> -u <USERNAME> -p<PASSWORD> -T <DESTINATION_PATH> fields-terminated-by="<ec>" lines-terminated-by="<er>" test av_wbt_course
Please let me know how to load data when the datatype is of CLOB ?

I was able to resolve this issue by using OWM Oracle Migration instead of using offline method by sqlloader scripts.

Display name not getting generated When creating user thorugh GTC

We are using GTC flat file as a trusted source. We see that display name not getting generated. And same thing happening when creating a new GTC mapping.
previously when we ran with few test user got created with display name through GTC flat file , Suddenly we see this issue display name not getting generated through flat file recon.
Manually user creation has no issues.
Please let me know if you have any idea about this issue.

Don't use GTC... GTC is inflexible and buggy technology... Nothing guaranteed... Rather create your own custom trusted recon code...
For more details
26 Known Issues of Generic Technology Connectors
http://docs.oracle.com/cd/E10391_01/doc.910/e10360/issues.htm

Wlproxy.log not getting generated

Hi
I am trying to proxy the weblogic requests through IIS 7.5, it is working. but wlproxy logs are not getting generated. Please fnd below my iisproxy.init file contents.
Could any one tell me if I am missing any thing.
Steps followed.
1. created website in IIS
2. added isapi filter by giving the iisforward.dll path, name given is wlforward
3. added handler mappings by giving *.wlforward as the path and giving iisproxy.dll path
4. added the file iisproxy.ini file
iisproxy.ini contents
WebLogicHost=xx.xx.xx.xx
WebLogicPort=7002
WLForwardPath=/
DefaultFileName=/TEST/index.jsp
WLproxySSL=ON
SecureProxy=OFF
RequireSSLHostMatch=false
Debug=ALL
DebugConfigInfo=ON
WLTempDir=D:/Temp
Regards
PPK

It is working. It is something to do with admin rights on that file clreation. I got full admin access. now it works.

Not getting generate option in Prd environment

Similar Messages

Maybe you are looking for