Not getting N status for E3000

I just reconfigured my router after some problems and I'm not able to get N status on it.
My wireless adapter only reads G right now, so I only get speeds of 54 max Mbps rate. How can I go about letting it get N status? I know it's not my wireless adapter because I live in a crowded area and I can pick up N on other wireless routers around me. But I don't see any options in the router settings to force N status.
Thanks for your help.

You can try to set the router’s network mode to wireless-N only and to manually set the card to wireless-N. In the event that this will not work, then perform a firmware upgrade and reset the router afterwards.

Similar Messages

  • "Could not get needed resources for application to be launched (id=-669)"

    I keep getting this message
    Setup Resourses Status
    Could not get needed resources for application [App name. edir path] to
    be launched (id=-669).
    Problem: Unable to connect to server [server name]
    I am able to browse to the server no problem as well as map a drive
    directly to it?
    I am not sure why I am getting this ?

    This is under the "Environment" portion of the "Run Tab"
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Support Forums Volunteer Sysop
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared either Novell or any rational human.
    <[email protected]> wrote in message
    news:[email protected]...
    > Craig where do I to determine that? I know it has to run as admin but I
    > am not sure if it is set like that...
    >
    >> Is the application configured to run "Normal", "Secure System User", or
    >> "Unsecure System User".
    >>
    >> Methods #2 and #3 require the workstation not the user to have rights
    > and
    >> require the use of UNC instead of a mapped drive.
    >>
    >> --
    >> Craig Wilson - MCNE, MCSE, CCNA
    >> Novell Support Forums Volunteer Sysop
    >>
    >> Novell does not officially monitor these forums.
    >>
    >> Suggestions/Opinions/Statements made by me are solely my own.
    >> These thoughts may not be shared either Novell or any rational human.
    >>
    >> <[email protected]> wrote in message
    >> news:[email protected]...
    >> > It is associated with the user and I can get access to the exe via
    > their
    >> > PC using their login
    >> >
    >> >> ,
    >> >> > Could not get needed resources for application [App name. edir
    > path]
    >> > to
    >> >> > be launched (id=-669).
    >> >> >
    >> >> > Problem: Unable to connect to server [server name]
    >> >> >
    >> >> > I am able to browse to the server no problem as well as map a drive
    >> >> > directly to it?
    >> >> >
    >> >> -669 is "wrong password" IIRC. Is this app associated to user or WS,
    > ie
    >> > is
    >> >> t trying to access that path wth the User's or Workstation's
    >> > credentials?
    >> >>
    >> >> - Anders Gustafsson, Engineer, CNE6, ASE
    >> >> NSC Volunteer Sysop
    >> >> Pedago, The Aaland Islands (N60 E20)
    >> >>
    >> >> Novell does not monitor these forums officially.
    >> >> Enhancement requests for all Novell products may be made at
    >> >> http://support.novell.com/enhancement
    >> >>
    >> >> Using VA 5.51 build 315 on Windows 2000 build 2600
    >> >>
    >> >
    >>
    >>
    >

  • In QA16 i given material doc no ,i am not getting inspection lots for UD

    iam using QA16 for quality inspection .
    Iam given material doc no in QA16,but iam not getting inspection lots for UD(usage decession).its comming empty screen in QA16.
    iam using multiple UD at a time.

    Dear check this below points.
    1. Check if Material Master Auto usage decision has been checked.
    2.All characteristics should be optional if not make all the char as "Optional " through control indicator This can be done for next lots only.
    3.All chracteristics must be calculated and status should be 5 completed and no defect recording done.
    4. Check mic indicator activated in material master and you have to do RR for this inspection lot or u can force fully complete all MICs and male IL status INSP and check again in QA16
    5.Did you selected releavant UD selected set for inspection lot in QA16.
    Cheers
    KK

  • I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen.  How can I make the sound alert work?

    I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen.  How can I make the sound alert work?

    I have had this same problem for weeks now with my 4S.  I just got a new 5S after being extremely frustrated and the same thing - no sounds.  After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?"  I didn't even know such a function existed.  Upon looking that was exactly the issue.
    To resolve, go to Settings> Do Not Disturb> Manual.  If it is green, turn it off.  You will now get phone calls and text alerts.
    This functionality is also on your quick access utility menu (slide up menu).  I assume this is how it was enabled on my phone.
    I will post on other sites since I searched for weeks for this solution and didn't see it anywhere.  Good luck!

  • GLPCA table not getting updated correctly for VBUND

    Hi All,
    I have come across one issue that the value of trading partner field (VBUND) in table GLPCA are not getting updated correctly for document type KP.
    In vendor master this field has different value versus it is showing in GLPCA-VBUND.
    Does any one knows about ?
    Thanks for your help on it.
    Regards,
    Manoj

    Hi Sridhar,
    Thanks for your response on it.
    This note is not applicable for our system as we are working on 4.0B with support pack 52.
    Also we are getting this worng update of this field (GLPCA-VBUND) while doing MR11 creating document with doc. type KP. This value is not picking from vendor master (LAF1-VBUND) and randamly picking any value. Not sure from where ?
    Please advise your thought.
    Thanks,
    Manoj

  • CLASSPATH not getting picked up for MWA

    Hi All,
    Oracle Database 11g R 11.1.0.7.0
    Oracle Applications R 12.1.1
    O/S:Linux
    CLASSPATH not getting picked up for MWA.My classes are lying under $JAVA_TOP/xyz. However my suspicion is that the jvm that deals with MWA is not looking at the classpath above.
    I checked the CLASSPATH from forms using the block $ENVIRONMENT$ and it is looking at:
    /<instance_name>/<instance_name>/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.2/jlib/repository.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.2/jlib/ldapjclnt10.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.2/jlib/debugger.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.2/jlib/ewt3.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.2/jlib/share.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.2/jlib/utj.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.2/jlib/zrclient.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.2/reports/jlib/rwrun.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.2/forms/java/frmwebutil.jar
    This clearly does not have $JAVA_TOP/xyz under it.
    Could anyone please let us know what needs to be done and where the classes need to be placed?
    Thanks for your time!
    Regards,

    Hi,
    Did the above steps but still CLASPATH is somehow not getting picked up for MWA.
    $ env|grep CLASSPATH
    REPORTS_CLASSPATH=/<instance_name>/<instance_name>/apps/tech_st/10.1.2/reports/jlib/rwbuilder.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.2/reports/jlib/rwrun.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.2/jlib/zrclient.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.2/j2ee/home/oc4j.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.2/j2ee/home/lib/ojsp.jar
    AF_CLASSPATH=/<instance_name>/<instance_name>/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/<instance_name>/<instance_name>/apps/apps_st/comn/java/lib/appsborg2.zip:/<instance_name>/<instance_name>/apps/apps_st/comn/java/classes
    CLASSPATH=/<instance_name>/<instance_name>/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/<instance_name>/<instance_name>/apps/apps_st/comn/java/lib/appsborg.zip:/<instance_name>/<instance_name>/apps/tech_st/10.1.2/forms/java:/<instance_name>/<instance_name>/apps/tech_st/10.1.2/forms/java/frmall.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.2/jlib/ewt3.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/<instance_name>/<instance_name>/apps/apps_st/comn/java/classes:/<instance_name>/<instance_name>/apps/apps_st/comn/java/classes/xxx
    $ echo $CLASSPATH
    /<instance_name>/<instance_name>/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/<instance_name>/<instance_name>/apps/apps_st/comn/java/lib/appsborg.zip:/<instance_name>/<instance_name>/apps/tech_st/10.1.2/forms/java:/<instance_name>/<instance_name>/apps/tech_st/10.1.2/forms/java/frmall.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.2/jlib/ewt3.jar:/<instance_name>/<instance_name>/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/<instance_name>/<instance_name>/apps/apps_st/comn/java/classes:/<instance_name>/<instance_name>/apps/apps_st/comn/java/classes/xxx
    System is expecting file at default $JAVA_TOP/oracle/apps/wms/td/server location
    /<instance_name>/<instance_name>/apps/apps_st/comn/java/classes/oracle/apps/wms/td/server
    $ ls -l XxgilTaskSignonFunction*
    ls: XxgilTaskSignonFunction*: No such file or directory
    where user's have file at $JAVA_TOP/xxx/oracle/apps/wms/td/server location.
    /<instance_name>/<instance_name>/apps/apps_st/comn/java/classes/xxx/oracle/apps/wms/td/server
    $ ls
    XxgilMainPickFListener.class XxgilMainPickPage.class XxgilManifestPickFListener.class XxgilManifestPickPage.class XxgilTaskSignonFunction.class
    Not sure what changes to make to fix this.
    Any suggestions please.
    Thanks,

  • Can not get application bc4j for adding context root file

    Hi all,
    Can someone help me on this,
    i got this this error while trying to run my web based reporting:
    06/08/21 18:01:04 [SEVERE]: Error instantiating application at file:/C:/Documents and Settings/Bryan1/Desktop/Pattern Maching JSP 2006Feb/jdevstudio1013/jdev/system/oracle.j2ee.10.1.3.34.12/embedded-oc4j/applications/bc4j.ear: Unable to get ApplicationConfig for bc4j : Error creating deployment directory: IO Error: The system cannot find the path specified.
    06/08/21 18:01:04 [SEVERE]: Error instantiating application at file:/C:/Documents and Settings/Bryan1/Desktop/Pattern Maching JSP May2006/jdevstudio1013/jdev/system/oracle.j2ee.10.1.3.34.12/embedded-oc4j/applications/ITS.ear: Unable to get ApplicationConfig for ITS : Error creating deployment directory: IO Error: The system cannot find the path specified.
    2006-08-21 18:01:07.265 WARNING J2EE_OJR0007 Can not get application bc4j for adding context root file:/C:/Pattern Maching JSP May2006/jdevstudio1013/jdev/system/oracle.j2ee.10.1.3.34.12/embedded-oc4j/config/default-web-site.xml
    Ready message received from Oc4jNotifier.
    Embedded OC4J startup time: 5282 ms.
    Target URL -- http://192.168.2.55:8988/Trans-Reporting-context-root/login.jsp
    06/08/21 18:01:07 Oracle Containers for J2EE 10g (10.1.3.0.0) - Developer Preview initializedIF i run http://192.168.2.55:8080/Reporting/login.jsp from web browser then is ok, but cannot straight run from JDeveloper? How to set the path?
    rgds,
    bryan

    Dear Frank,
    Thanks for ur reply but i still failed to access to my login.jsp
    I already select RUN from menu then clean <XXXX.jpr>, then rebuild the project and Run the project but still have the same problem.
    rgds,
    bryan

  • Hello, I am running a Mac book pro soft. 10.5.8 version. Since june the current year I did not get any updates for the software or any kinds of other application, in my opinion that's weird for such a company.

    Hello, I am running a Mac book pro soft. 10.5.8 version. Since June the current year I did not get any updates for the software or any kinds of the other application, in my opinion that's weird for such a company.
    The problem that I have now is with the Iphone 5 which is not supported for the current Itunes and I can not download the Itunes 10.7 version. What I supposed to do in this case because I can not syncronize at all.
    Please give me a hand as soon as possible.
    Many thanks

    Mac OS X 10.5.8 is years old, 3 major versions out-of-date and unsupported at this point. You will never get any further updates for 10.5.8, and more and more applications will stop supporting 10.5.8 as time goes on. As mende1 points out, you can buy Snow Leopard (Mac OS X 10.6), which will let you use your new iPhone with your computer, but you need to make sure your computer's hardware is supported. See the system requirements for Snow Leopard:
    http://support.apple.com/kb/SP575
    If your computer cannot run Snow Leopard, you will need to either buy a new computer or abandon any thoughts of syncing the iPhone with that computer.
    Also, note that you'll get far better integration of your iPhone and your Mac if you're using Lion (Mac OS X 10.7) or Mountain Lion (Mac OS X 10.8), which are required to use iCloud. Of course, the requirements of those systems are even steeper than those of Snow Leopard:
    http://support.apple.com/kb/HT4949
    http://support.apple.com/kb/HT5444

  • I can not get the download for indesign to work

    I can not get the download for indesign to work.

    Perhaps this Adobe Help document may help you:
    http://helpx.adobe.com/creative-suite/kb/download-install-trials.html?t2

  • Error in getting process status for oracle instance: instance12- component: coreapplication_obisch1

    Hi,
    while uploading new rpd getting error message in enterpriise manger
    Error in getting process status for oracle instance: instance12- component: coreapplication_obisch1,chekced in the dignostic log found above mentioned error
    what can be cause of the probelm
    thanks

    Hi,
    1.Try using the sample rpd of it works, then the problem with the new rpd.
    2. Restart the service once then upload the new rpd.
    Regards,
    VG

  • HT203167 I have purchased Forbes magazine thru zinio app. My money was deducted but I am not getting the magazine for download inside zinio app. How can I get this fixed?

    I have purchased Forbes magazine annual subscription
    thru zinio app. My money was deducted but I am not getting the magazine for download inside zinio app. How can I get this fixed?

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
    Regards.

  • Not getting transfer rules for 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL

    Hello Bi experts,
    Actually i am implementing standard Purchasing module in BI system.
    While implementing , i have installed cube 0PUR_C04 with data flow before options.
    After installation , i am not getting transfer rule for 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL .
    I am getting transfer rule for 2LIS_02_S011 only.
    0PUR_c04 contains these 4 dataspurces - 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL , 2LIS_02_S011 .
    So how can i get these transfer rule. and if we want to implement std Purchasing module in BI , which Cubes are required or necessary.
    In metadata repository also , for Cube 0PUR_c04 , it does not showing transfer rule HDR/ITM/SCL. there also it is now showing transfer rules.
    I will be also very thankful if anybody just give me overview of purchasing.
    Thanks,
    Sada.

    Hello Mani,
    Thanks a lot.you are the first one who has answered my que. which i expect .
    Look at following floe in infoprovider in my system. and please tell me what exactly i should do?
    Cube->Purchasing Groups                                                                                0PUR_C04
               Update Rule->0PUR_C04 2LIS_02_HDR                                                                       AY0XVMCJPXXXXXXXXXXXXXXXX
                                    Infosource->Purchasing Data (Document Header Level) as of 2.0B      2LIS_02_HDR
               Update Rule->0PUR_C04 2LIS_02_ITM                                                                         4YSO2PF9XXXXXXXXXXXXXXXXX
                                     INfosource->Purchasing Data (Document Item Level) as of 2.0B          2LIS_02_ITM
               Update Rule->0PUR_C04 2LIS_02_S011                                                                      CSB3FHGQXXXXXXXXXXXXXXXXX
                                     Infosurce->Purchasing groups                                                               2LIS_02_S011
                                                      Transfer Rule->from 2LIS_02_S011 for SC4 Client 600        2LIS_02_S011                  SCXCLNTXXX
                                                                             Datasource->Purchasing groups                    2LIS_02_S011
               Update Rule->0PUR_C04 2LIS_02_SCL                                                                        4ZZ0DMZXXXXXXXXXXXXXXXXXX
                                     Infosource->Pur.Data (Document Schedule Line Level)                         2LIS_02_SCL
    Mani i am expecting answer from you.
    Thanks,
    Sada

  • Does iOS 6 beta 4 is the final official iOS 6?? i am not getting any update for my mobile (which is running iOS 6 beta 4 ) to update to official iOS 6

    Does iOS 6 beta 4 is the final official iOS 6?? i am not getting any update for my mobile (which is running iOS 6 beta 4 ) to update to official iOS 6

    Take your backups and copy your photos off, then put your device in DFU mode to do a restore.

  • Not Getting Verification Code for OpenWap, Liquoi and Connect A2 App

    I Have purchased the Firefox OS phone but i am Not Getting Verification Code for OpenWap, Liquoi and Connect A2 App

    Unfortunately, we do not provide support for apps. You should contact the developer of the app for more information. From what I can see, you are not getting anything from all apps. A simple thing you can to do is to reboot the phone.
    To reboot your phone:
    #Take the back cover of the phone off.
    #Take the battery out.
    #Take the SIM card and microSD card out (if applicable).
    #Wait 10 seconds.
    #Put the SIM card and microSD card back in (if applicable).
    #Put the battery back in.
    #Put the back cover back on.
    #Turn the device on.
    #Check if the issue you were having is still present.
    Please report back to us if this solved your problem!
    Thank you

  • In BDCP table I am not getting any entries for EKKO,EKPO,EKBE,EKET,EBAN

    In BDCP table I am not getting any entries for EKKO,EKPO,EKBE,EKET,EBAN tables.
    But there are entries for many other tables.
    I have got objects for EKKO,EKPO,EKBE,EKET,EBAN tables from TCDOB tables.

    Hi Avishek,
       Let me explain the meaning of Change pointers.
    If you have entry in BDCP table for MARA, that means everytime a material is created in MARA table in one system, a corresponding Material is created in another system which is connected to the current system VIA ALE. and whenever you change that material in your source system, then the change is propagated to the target system also(If you have done the change pointer set up).
    The you do not have entries for other tables becuase the configuration for change pointers is not done for those Objects(In your case the change pointers are not defined for Purchase Orders and hence no entries in BDCP table).
    Regards,
    Ravi kanth Talagana

Maybe you are looking for

  • Problem with Mac OS X Unexpectedly Quitting on MacBook

    Sometime yesterday my MacBook started requiring that I restart it every few minutes. The screen turns grayish and displays the message that the computer must be restarted in English and a few other languages. Once the computer restarts it tells me th

  • Versions supported by Weblogic 8.1

    Hi, I am very new to java and weblogic. I am about to install weblogic 8.1 Service Pack 5. I wants to know which are best version of jdk, servlet/jsp, ejb and tomcat supported by weblogic 8.1. Please help me .............. Thanks & Regards -Sandeep

  • How to copy a table from one system to another system

    Hi all,         can any one say how to copy table from one system(sys1) to another system(sys2). regards, nagaraj

  • Checkbox ,at selection screen output

    i hav 2 checkboxes.at selectionscreen if i click on one of them, the other should get deactive and viceversa..pls let me know the code...points will be awarded..

  • Adobe PScs5Extended OpenGL Problem

    SYSTEM: Dell Precision M4700 ips RGB-Panel IntelCore I5 3320M@2600MHz Nvidia Quadro K1000M Crucial M4 256GB SSD CorsairVengeance 16GB(2x8) DDR3 1600MHZ Win7 64Bit Professional Opengl version, Adobe photoshop version, Graphic Card driver version, Phot