Not getting notifications in the taskbar anymore

Hey,
i just tried a lot of stuff and it still doesn't work so i'll ask here.
Status:
my Skype showed Notifications in the taskbar and played a sound when i got a new message till 3 or 4 days ago.
I didn't change anything in Skype and i'm not aware that i changed anything on my pc since then.
EDIT: Additionally i just found out, i dont have Notification or message counter for new messages besides the contact name/picture in the skype window. I don't hear the sound when skype is the active window and i am in a different conversation and someone messages me. (NO MESSAGE NO SOUND NOTIFICATION ???). Only when im in the conversation already i hear the sound, and thats because i ticked that option in the skype sound menu to test.
My sound settings are on, my skype settings for incoming messages are on. If someone calls me i get the ring sound. In the taskbar theres no orange indicator anymore for new messages.
What I already did:
- installed over my current installation
- did a clean install (deleted appdata folder)
- restarted pc
- unpined and pined the program to the taskbar, tried without pinning it
- ran as administrator and without it
running Windows 7 on newest updates, drivers are updated, rest of the pc runs fine, skype version 6.21.0.104, if you need additional infos tell me
ATM I'm rather clueless where the problem is, it kinda just appeared. It's really annoying if i don't hear nor see when i have new messages.
any help is appreciated
[Removed for privacy]
Solved!
Go to Solution.

Given the number of users with notification problems, and always the same remedy "click on user, go to Conversation menu, edit Notification Settings" I was rather thinking of a small Skype gui design flaw here. Why isn't the Notification Settings entry listed in the -context- menu? (right click on user)
Until now I've always been thinking that the top menu bar Notification Settings entry was some -global- setting, for all users at once.
Thx,
Andre

Similar Messages

How to not get notifications when the iOS app is closed

I don't know if this is for everyone or just me. When I double click the home button and close skype I still get's messages. This is so annoying, I'm in a big group chat so I almost always get's messages. And turning on bussy doesn't work either or turning on sleep mode (sometimes sleep mode works). The only thing that has been working is turning on offline. I think this is really bad, just turning off the app should work. So does this this tace celuar network even when the app is closed? That truly SUCKS! I love the app othewise. Please fix this. I've a iPhone 5s

Hi Krrrishna,
>>How do I show all the toast messages received when the application was closed and when user clicks any on one of the toast message ? If that is not possible what is the workaround I can use so that I wont miss any of those messages ?
In my experience, there is no direct way to handle multiple messages in the same time.
If I'm not misunderstanding, I think you want to make a Message app, as a workaround, I think you can pull message data from your Mobile Service can display them in your Messages page, this is more like build-in message app.
About using offline data sync in Mobile Services, see
http://azure.microsoft.com/en-us/documentation/articles/mobile-services-windows-phone-get-started-offline-data/
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HT3576 im not getting notifications from the likes of facebook and twitter from wi-fi or 3g i dont know what to do can anyone pleaseeeee help me

i hope someone can help me it started i think when i got the new updat IOS 5 and ever since i havent been able to get any notifications to tell me anything has happened for example if i got a message on facebook or a tweet on twitter then it wont let me know i have to keep going on the app it self to find anything just hope someone can help me

Have you checked the notification settings inside of the apps themselves?

How do I get notifications in the lock screen?

I am not getting notifications in the lock screen even if my iPad 2 is on sleep mode, what has happened? How can I fix it?

settings- notifications. Edit. Choose application, then click it and choose how you want to be notice

I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. Help

I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.

Go to Settings > Privacy > Location Services.
Turn off SnapChat.
Go to Settings > Notification Center
Turn off SnapChat.
Restart the device.
Go to Settings > Privacy > Location Services.
Turn on SnapChat.
Go to Settings > Notification Center
Turn on SnapChat.
Test the issue.

HT4972 i am not getting notification on most of my apps, e.g twitter and facebook...except i go to the app and refreshed manually. its an iphone 4 and running on ios5...i have gone through everything and its still the same..help please........I seem to be

i am not getting notification on most of my apps, e.g twitter and facebook...except i go to the app and refreshed manually. its an iphone 4 and running on ios5...i have gone through everything and its still the same..help please........
I seem to be having the same problem on my brand new iPhone 4S. Everything was working fine on the phone until I updated to iOS 5.1.1, but now I no longer receive push notifications for the native Mail app, Instagram, or the Facebook app. I still seem to be receiving SMS texts and iMessages via push, but the aforementioned apps need to be opened before I can receive missed notifications (having them open in the background seems to make no difference).
Thanks for any help that you may provide!

did you try notifications under settings? You can customize it as per your requirement, for each application.
check this out: http://www.gottabemobile.com/2011/10/12/ios-5-how-to-use-notification-center/ or http://reviews.cnet.com/8301-19512_7-20120625-233/ios-5-notifications-a-deeper-l ook/

Not getting notification e-mail in case of time based publication

Hi,
We are working with subscription service.
We have one document subscribed by some users.
Users are getting notification mail whenever there is any modification in that particular document.
But when I am setting the lifetime property of the document.
Users are not getting notification e-mail when that document get published or get expired.
We checked in the Subscription Service.In the Allowed Admin Notification field we have to mention the proper event.
But we don't know which event name to mention.
It will be very helpful if any one let me know about it.
We are using EP 7.0.
Regards,
Biswarup

Hi Biswarup,
From the official documentation http://help.sap.com/saphelp_nw04s/helpdata/en/e8/a9a76828b8dc469969ff450ec81ced/content.htm this definitely should work out of the box.
Anyhow, what kind of subscription do you have chosen, immediate subscription or regular (daily, weekly, ...)?! If you are talking about an immediate subscription, try to alter this to a regular subscription. <i>Maybe</i> the change event which triggeres immediate subscriptions isn't thrown correctly by the TBP.
But even in this case, please open an OSS message, as this should be considered as a bug (or at least as a lack of documentation on help.sap.com).
Hope it helps
Detlev

Why can't I choose the application version via "get info" in the finder anymore

Upgraded to Maverick and installed Indesign CC 2014 only to find Suitcase has not kept up with an upgrade so fonts are not opening. I would like to use Indesign CC (9.2.2) until the font issues are resolved but cannot choose the application version via "get info" in the finder anymore (it just reverts back to CC 2014 when I select CC). I prefer not to uninstall CC 2014 but will if that is the only option.

We don't overwrite your apps so you can keep previous workflows. . Delete apps you don't want when you are ready.
https://helpx.adobe.com/creative-cloud/faq.html#deskApps
BLOG POST : http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
Creative Cloud Help | Install, update, or uninstall apps
Hope it helps you.
Regards
Rajshree

Not getting notifications for push emails

I have an iPhone 5s with IOS 7.1.2 installed. I have a mail account set up pointing to my company's Exchange server. I will frequently not get notifications of new email until I open the email app on my phone. I won't get them when the email actually arrives in my mailbox (which is the purpose of push technology). Any ideas why I'm not getting these notifications? I have alerts turned on (banner, badge app icon, show in notification center, show preview), so ideally, I believe I have everything I need turned on. The account is also configured as 'Push' in the 'Fetch New Data' section of the menu.
Thanks in advance for any help with this.

Hi fletchi18,
Welcome to Apple Support Communities.
It sounds like there is an issue with your iPhone receiving push notifications from your companies Exchange server. The article linked below has a lot of great information and suggestions which will resolve most issues like the one you described.
iOS: Troubleshooting Exchange ActiveSync 'Push' issues
http://support.apple.com/kb/TS1868
I hope this helps.
-Jason

ICloud messages using rules do not get notifications

I use severall rules to redirect my iCloud mail messages to different folders and doing so i do not get notifications when I receive a message corresponding to a rule. Does anyone have the same problem and does anyone have an solution to this issue?

do you have call forwarding turned on in settings/phone?

Set "always show all icons and notifications on the taskbar" via Group policy

Any ideas on how to set "always show all icons and notifications on the taskbar" on a set of users?
I thought it would be under User Configuration\Administrative Templates\Start Menu and Taskbar, but I cannot find it.
Anyone know if this can be enforced via policy?

Hello,
Thank you for your post here.
Unfortunately, there is not any group policy settings which can set "always show all icons and notifications on the
taskbar".
To distribute the setting, you can create a default domain user profile and copy it to the following network share.
When the domain user account is first logged onto the domain, the default profile will be applied.
\\<Server_name>\NETLOGON\Default User.v2
How to customize default user profiles in Windows 7 and in Windows Server 2008 R2
http://support.microsoft.com/kb/973289
This would only apply if a new profile is created, not for existing ones.

Total is not getting displayed in the ALV output.

Hi,
Total is not getting displayed in the ALV output.
I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
Are there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
source code:
DATA: layout TYPE slis_layout_alv,
      IT_eventS TYPE slis_t_event,
      fcat   TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
TYPES: BEGIN OF ty_tab,
      belnr TYPE dberchz-belnr,
      belzart TYPE dberchz-belzart,
      net TYPE dberchz-nettobtr,
      END OF ty_tab.
DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
SELECT belnr belzart nettobtr
FROM dberchz
INTO TABLE lt_tab[]
WHERE belnr eq '000000000001'.
if sy-subrc ne 0.
ENDIF.
* defining layout
layout-colwidth_optimize = 'X'.
layout-def_status = 'X'.
*defning event
*event
*defining field catalog
fcat-col_pos = 1.
fcat-fieldname = 'BELNR'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 2.
fcat-fieldname = 'BELZART'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 3.
fcat-fieldname = 'NET'.
fcat-tabname = 'LT_TAB'.
fcat-do_sum = 'X'.
APPEND fcat.
*calling alv
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
    i_callback_program             = 'YZ_PLR'
*   I_CALLBACK_PF_STATUS_SET       = ' '
*   I_CALLBACK_USER_COMMAND        = ' '
*   IT_EXCLUDING                   =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    is_layout                        = layout
    it_fieldcat                      = fcat[]
    i_tabname                        = 'LT_TAB'
    it_events                        = IT_EVENTS[]
*   IT_SORT                          =
*   I_TEXT                           = ' '
tables
    t_outtab                         = lt_tab[]
* EXCEPTIONS
*   PROGRAM_ERROR                    = 1
*   MAXIMUM_OF_APPENDS_REACHED       = 2
*   OTHERS                           = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks,
Gaurav

Hi
No I don't think, this is my code (based on your code) and it works fine:
TYPE-POOLS SLIS.
DATA: BEGIN OF LT_TAB OCCURS 0,
       BELNR LIKE BSEG-BELNR,
       GJAHR LIKE BSEG-GJAHR,
       WRBTR LIKE BSEG-WRBTR,
       WAERS LIKE BKPF-WAERS,
      END OF LT_TAB.
DATA: LAYOUT     TYPE SLIS_LAYOUT_ALV,
      IT_EVENTS TYPE SLIS_T_EVENT,
      FCAT       TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      REC_FCAT   TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS       = 1.
FCAT-FIELDNAME     = 'BELNR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 2.
FCAT-FIELDNAME     = 'GJAHR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 3.
FCAT-FIELDNAME     = 'WRBTR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-CFIELDNAME    = 'WAERS'.
FCAT-REF_FIELDNAME = 'WRBTR'.
FCAT-REF_TABNAME   = 'BSEG'.
FCAT-DO_SUM        = 'X'.
APPEND FCAT.
FCAT-COL_POS       = 4.
FCAT-FIELDNAME     = 'WAERS'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'WAERS'.
FCAT-REF_TABNAME   = 'BKPF'.
FCAT-DO_SUM        = SPACE.
APPEND FCAT.
SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
    WHERE BUKRS = 'MAAB'
      AND BELNR = '0000000001'.
LT_TAB-WAERS = 'EUR'.
MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
*CALLING ALV
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      IS_LAYOUT   = LAYOUT
      IT_FIELDCAT = FCAT[]
      I_TABNAME   = 'LT_TAB'
      IT_EVENTS   = IT_EVENTS[]
    TABLES
      T_OUTTAB    = LT_TAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
I've also inserted a currency field
Max

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Work item not getting displayed in the portal

Hi experts,
We are creating a protoype for one of the standard HCM form for change in working time. When we initiate the process, the workflow is supposed to identify the agent(which is the manager in this case) and push the work item in the inbox of the manager.
In our issue, we are able to see the workitem in SAP inbox, but the same work item is not getting displayed in the portal.
If we try to approve from the SAP inbox, the hard coded message u201CWork item can only be executed using the Portal and the UWLu201D comes. [this comes through the method of one of the tasks 17900101 which we are using for approving the form]
We commented the message by using a Z class. Now we donu2019t get the hardcoded message, but still the workflow does not complete from here.
Can this be aan integration issue of the workflow tasks with the portal??Can someone elaborate on this??

<ItemType name="uwl.task.webflow.TS17900101.SAP_ECC" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria systemId="SAP_ECC" externalType="TS17900101" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="WebDynproApplication" value="ApproveFormApp"/>
            <Property name="WebDynproDeployableObject" value="sap.com/pa~asr~formstep"/>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="openInNewWindow" value="yes"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
You have to say to your portal team to modify their XML file as above. In simple you hvae to configure the task in the portal and in the SWFVISU txn as follows with the following vizualization parameters
Task TS17900101 and visualization type is JavaWebDynpro
APPLICATION     ApproveFormApp
PACKAGE     sap.com/pa~asr~formstep

Links not getting displayed in the contextual panel

Hi,
I have created a contextual panel inside a transparent container. And created a method in the same view supply_values of type supply function to supply the values to the panel.Inside the method I have coded like:
DATA TAB TYPE WD_THIS->ELEMENTS_N_VIEW_SWITCH.
DATA LINE TYPE WD_THIS->ELEMENT_N_VIEW_SWITCH.
LINE-TEXT = 'User Manual'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
LINE-TEXT = 'Logout'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
NODE->BIND_TABLE( TAB ).
Also in the context of the view I have created a node and supplied the method 'supply_values' in the supply function.Under the node I have 2 attributes named text and enabled. Text is of string type and enabled is of boolean type. In the properties of the contextual panel I have bound the visible property with the enabled attribute.
Now when I am running this application , links are not getting displayed in the contextual panel. Though when I debug TAB contains the values. Please suggest if I have missed out something or I need to look into the properties of the contextual panel. Any pointers will be really helpful.
Regards,
Ashutosh

Hi,
Can you elaborate ' ItemEnable property of ViewSwitch'.
I have already bound the enable property of the panel with a context attribute of type wdy_boolean but it is still not working.
Regards,
Ashutosh

Not getting notifications in the taskbar anymore

Similar Messages

Maybe you are looking for