Not getting Page from Prod server
Hi All,
I have set two pager email Id in my prod server
I have a job when this job succeed then it will send a page to both email ID
Job ran successfully and both Email ID did not get any single page about this
when I checked in operator history in Most recent notification it shows that page has been sent on expected time.
Same I have try with Dev server it's working fine Only difference in Pro and Dev job is: In prod job taking 4 hour and in Dev job taking 5 min.
Yes Job history shows success (Operator Paged
SQLDBAONCALL)
Email profiles are also fine (I am getting mail for other job )
there is no log for in sql server as well as sql server agent error log
Dev and prod are using same mail ID
Hi ImranKazi,
According to your description, the operator does not receive an e-mail in Production environment. I recommend you configure database mail in Production environment, then send a test e-mail to the operator’s e-mail address. We need to verify if your profile
and account are configured correctly. For more information, see:
http://www.codeproject.com/Articles/29060/SQL-SERVER-Configure-Database-Mail-Send-Email
After setting up database mail successfully, if you want to set up an alert to an e-mail operator with a message, you need to define an operator and alert , restart SQL Agent to activate settings. When you execute the job successfully,
it will send an alert to the operator. I have done a test in SQL Server 2012, it can run well. There is an similar issue about
how to setup SQL Server alerts and email operator notifications, you can review it.
http://www.mssqltips.com/sqlservertip/1523/how-to-setup-sql-server-alerts-and-email-operator-notifications/
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support
Similar Messages
-
Could not get IOR from Domino Server while provisioning Lotus Notes
Hi all,
There are two servers that have OIM installed, development server and test server. From development server, we can
provision to Lotus Notes just fine. But for test server everytime when
provision to Lotus Notes. There will be an exception
NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
From test server
I can access the URL http://10.3.100.61:63148/diiop_ior.txt using Internet Explorer
I can telnet to 10.3.100.61 63148
I can use connector testing program and it work fine
All configuration and jar files are the same as development server
There is no firewall or antivirus running in both systems.
Both server is virtual server using VMWare.
OS: Windows2003R2 Enterprise
DB: Oracle 10gR2 10.2.0.2
AS: Oracle AS 10g 10.1.3.3.0
OIM 9.1.0
Lotus Notes Connector 9.0.4.2
Thank you.
Satit
The error is as below
=================================================
INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init
INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init
DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Host 10.3.100.61
DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Port 63148
DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Admin Pongtape Ungkawanish/Telecom./Central Support/Fin./KK_Bangkok/TH
DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Certifier OU
DEBUG,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LotusNotesProvision::init : Before session
08/11/11 11:24:26 Running setTimeoutParameters
08/11/11 11:24:26 Running Connect
INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession
INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Non-Secure Mode
ERROR,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Connection refused to Lotus Notes......
NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
at lotus.domino.NotesFactory.requestIORPlain(Unknown Source)
at lotus.domino.NotesFactory.requestIORUsingArgs(Unknown Source)
at lotus.domino.NotesFactory.getIOR(Unknown Source)
at lotus.domino.NotesFactory.createSessionUP(Unknown Source)
at lotus.domino.NotesFactory.createSession(Unknown Source)
at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
at com.thortech.xl.Integration.HostAccess.LotusNotesProvision.connect(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.CONNECT(adpLNCREATEUSER.java:449)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.implementation(adpLNCREATEUSER.java:160)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.retryTasks(Unknown Source)
at com.thortech.xl.ejb.beans.tcProvisioningOperationsSession.retryTasks(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.SecurityRoleInterceptor.invoke(SecurityRoleInterceptor.java:47)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at tcProvisioningOperations_RemoteProxy_6ocop18.retryTasks(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NullPointerException
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:781)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:669)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:913)
... 45 more
INFO,11 Nov 2008 11:24:26,109,[ADAPTER.LOTUSNOTES],Unable to connect to the target. Attempting to reconnect after delay of 2000ms.......
INFO,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession
INFO,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Non-Secure Mode
ERROR,11 Nov 2008 11:24:28,110,[ADAPTER.LOTUSNOTES],LNotesConnectionUtil::getSession : ***Connection refused to Lotus Notes......
NotesException: Could not get IOR from Domino Server: http://10.3.100.61:63148/diiop_ior.txt
at lotus.domino.NotesFactory.requestIORPlain(Unknown Source)
at lotus.domino.NotesFactory.requestIORUsingArgs(Unknown Source)
at lotus.domino.NotesFactory.getIOR(Unknown Source)
at lotus.domino.NotesFactory.createSessionUP(Unknown Source)
at lotus.domino.NotesFactory.createSession(Unknown Source)
at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
at com.thortech.xl.Integration.HostAccess.LNotesConnectionUtil.getSession(Unknown Source)
at com.thortech.xl.Integration.HostAccess.LotusNotesProvision.connect(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.CONNECT(adpLNCREATEUSER.java:449)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpLNCREATEUSER.implementation(adpLNCREATEUSER.java:160)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcProvisioningOperationsBean.retryTasks(Unknown Source)
at com.thortech.xl.ejb.beans.tcProvisioningOperationsSession.retryTasks(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.SecurityRoleInterceptor.invoke(SecurityRoleInterceptor.java:47)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at tcProvisioningOperations_RemoteProxy_6ocop18.retryTasks(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NullPointerException
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:781)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:669)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:913)
... 46 morecheck if DIIOP service is turned on at the Lotus Domino side...
Oleg. -
I have written 2 web services 1) Subscribing to Exchange Server 2) Notification client
I am able to create subscription to Exchange Server. But from Exchange server my notification client webservice is nt getting called. I am not sure how i am missing out any setting. below is my subscribe code and notification client code.
Subscribe code :
ExchangeService service = new ExchangeService(ExchangeVersion.Exchange2010_SP1);
service.UseDefaultCredentials = true;
service.Url = new Uri(exchangeServerurl);
FolderId parentId= FindFolderIdByDisplayName(service, "Order", WellKnownFolderName.PublicFoldersRoot);
pushSubscription = service.SubscribeToPushNotifications(
new FolderId[] {FindFolderIdfromRoot(service, "EmpCreatealert", parentId)},
new Uri(notificationService) /* The endpoint of the listener. */,
1 /* Get a status event every 5 minutes if no new events
are available. */,
null /* watermark: null to start a new subscription. */,
EventType.NewMail);
Notification client :
public class Notification : NotificationServicePortType, INotification
public SendNotificationResponse SendNotification(SendNotificationRequest request)
log("Enter SendNotification");
SendNotificationResponse snr = new SendNotificationResponse();
snr.SendNotificationResult = new SendNotificationResultType();
snr.SendNotificationResult.SubscriptionStatus = SubscriptionStatusType.OK;
return snr;
Can anyone suggest me what els i should do to get notification client to get called.How are you testing this ? Are you just creating posts in the Public Folder or is the folder mail enabled and your sending email to it ?
Are you getting the heartbeat notifications ?
Have you tested your endpoint is accessible from the Exchange Server ? are you getting any error logged see
http://www.infinitec.de/post/2009/06/21/Troubleshooting-Push-notifications-failures.aspx
Your only subscribing to the NewMail event on public folder I would suggest at least for testing you subscribe to the CreateItem, MoveItem, DeleteItem events as well to see if other event fires when you create and delete Items in the folder. You might also
want to test something like
http://blogs.msdn.com/b/emeamsgdev/archive/2012/12/20/ews-push-notification-sample.aspx which is a basic sample
Cheers
Glen -
Clients not getting DHCP from external server
Hi,
I have a 4402 (version 7.0.235) working with 10 units of 1121 APs connected to it. The WLC is not configured to work in LAG mode. Physical portt #1 is connected to the Main Switch (trunk). I have 3 WLAN mapped to 3 Different VLAN and Everything (security and internal, external DHCP) is working swell...
Now- I have connected Physical port #2 directly to an ADSL Router (giga port), Configured Port 2 as untaggedwith the proper IP details.
I have configured this interface to receive DHCP from the ADSL Router and for some reason, Clients are not getting addresses.
When I assign a Static address to my laptop I get internet access and all is nice. I tried configuring The WLC internal DHCP server (instead of the ADSL router) and that didn't help. It seems like a DHCP problem but I dont understand the source of the problem of think of the solution.
When turning off the proxy settings I noticed that it helped. Is there anything to do with that? The problem was that after a while the other WLANs starting causing DHCP issues as well.
What is supposed to be configured? Any Expert is the House?
I attached a crappy drawing..Hi Scott,
Thanks for your answer.
So what you are basicly saying is that I have 2 choices: 1 - disable the Proxy option on the WLC and work with external DHCP servers (internal will not work when this is enabled). 2 - Enable the Proxy option and only work with the WLC internal DHCP.
I have installed many WLCs this way, having Different DHCP Servers (external and internal) for multiple WLANs.
What do you think may be different this time? The router that I am using isn't the most expencive but it is providing DHCP to other clients (wired client) with no problems.
Thanks!!! -
Users not getting IP from QIP server
Dear Friends,
Need your advice on this issue.
Users of our new site complained of not getting IP dynamically from DHCP server. Static IPs works fine.
The LAN interface of the router is configured with helper IP address of QIP servers.
On the router there exists a DHCP pool configuration, later we removed this config understanding the helper address will
assign the ip address dynamically.
QIP which serves as DHCP is confgured to assign the IPs, but the users complined of not getting IPs including IP phones.
Kindly advice what could be possible chances of this issue.
Thanks in advance
rYsYou cant have both the ip helper-address and a DHCP pool configured on the router. Basically what happens is the client DHCPDISCOVER will pick the first DHCP server that answers it and in this case its the the router. If you want to pass traffic all the way to the DHCP server, you need to disable the DHCP server on the router and leave only the ip helper-address configured so it can relay the broadcast to the defined DHCP server.
It sounds like you have this current topology for your DHCP server that is working:
Client ------------>DHCPDISCOVER ---> Router(DHCP Server)
<------------DHCPOFFER
------------>DHCPREQUEST
<------------DHCPACK
You want to configure your QIP DHCP Server to respond to DHCPDISCOVER, you will need to remove the DHCP pool from the router and add "ip helper-address x.x.x.x" where x.x.x.x is your DHCP server ip.
If that still does not work, you will need to check the configuration on your DHCP server to ensure its not mis-configured. QIP is not a cisco product but you should be able to view debugs on that application to identify if the DHCP server is sending an offer or dropping the request. Most likely your scopes are mis-configured on the server. -
LAN was down ie Users are not getting ip from DHCP server after enabling DHCP snooping
Hi All ,
Enclosed file has network connectivity diagram.
1. L3 vlan's ie 2,3,4,5 and 6 are configured on ACC-CR1 and ACC-CR2.
2.Trunk is configured between Core switches ( CR1 and CR2) and access switches .VTP mode is transparent on all switches.L2 vlans are configured on all access switches.
3.DHCP is server is located at different location and is reachable over MPLS.
Without enabling dhcp snooping , users connected to access switches (Sw1,sw2,sw3 and Sw4 ) are getting ip address from DHCP server without any problem and everything is working fine.
But users connected to Sw3 and Sw4 are getting ip address from rouge DHCP server which is not pingable from any one of the switch.
So we have configured DHCP snooping for all vlan's on CR1 , CR2 , SW3 and SW4 and "trusted uplink ports" which are connected to WAN routers from CR1 and CR2 and also "trusted uplink ports " of Sw3 and Sw4 which are connected to CR1 and CR2.
As soon we have enabled DHCP snooping and trusted respective uplink ports , users are not getting ip address from remote DHCP server and even users connected to Sw1 and SW2 are facing same issue.
Note : DHCP snooping is not configured on SW1 and SW2.
Why users are not getting ip address from remote DHCP server as soon as we enabled dhcp snooping on Core switches and two access switches ie sw3 and sw4 ? what could have caused DHCP packets to be dropped ? Any idea would be appreciated .Hi,
as you say: " HSRP is configured between CR1 and CR2 and Vlans are active on CR1" does it mean there are L3 intrefaces configured in each VLAN on your CR switches and ip hepler-address pointing to the remote DHCP server is configured on each of them?
I know it's difficult in a productive environment but IMHO you need to find out where are the DHCP offers dropped.
Either by enabling DHCP debugging or by capturing packets via Wireshark, e.g.
Best regards,
Milan -
One socket and two ports, not getting response from the server
Hi everyone,
I am working on device which communicate through Tcp sockets, It has an IP address and one port for listening and another for sending the response.
Problem is that I am able to create a connection to Device ip+port, and i am trying to listen on the same port while the device is sending the response on other port. My problem is that i can't create another socket using this port and therefore not getting the response from the device.
Can you people tell me how to handle such socket communication in java ?
Thanks in advance.I am working on device which communicate through Tcp sockets, It has an IP address and one port for listening and another for sending the response.Are you sure? That's not usual. It would be usual for it to use the same port for listening, reading, and writing.
Problem is that I am able to create a connection to Device ip+port, and i am trying to listen on the same port while the device is sending the response on other port.I would try just reading from the same socket you are sending on. I suggest you have misunderstood how the device works. -
NOT GETTING IP FROM DHCP SERVER
hello,
i setup a dhcp pool in my distribution switch which is directly connected to my access.
distribution ip to access is :int gi1/0/1 :192.168.250.1
accesss ip to distribution is int gi 1/0/1 : 192.168.250.2
they can ping each other. but the pc cannot get ip from the distribution switch. what might be the problem of this?
my distribution switch configuration for dhcp pool is:
ip dhcp pool vlan 247
network 10.60.247.0 255.255.255.0
default router 10.60.247.2
my access switch config is
int vlan 247
ip add 10.60.247.4 255.255.255.0
ip helper address 192.168.250.1
thank you and best regards...hello,i setup a dhcp pool in my distribution switch which is directly connected to my access.distribution ip to access is :int gi1/0/1 :192.168.250.1accesss ip to distribution is int gi 1/0/1 : 192.168.250.2they can ping each other. but the pc cannot get ip from the distribution switch. what might be the problem of this?my distribution switch configuration for dhcp pool is:.ip dhcp pool vlan 247 network 10.60.247.0 255.255.255.0default router 10.60.247.2my access switch config isint vlan 247ip add 10.60.247.4 255.255.255.0ip helper address 192.168.250.1thank you and best regards..
Hi,
What is the model of the switch and vlan247 host are able to ping the 192.168.250.1 and check out the below link for configuring DHCP in routers and switches.
http://articles.techrepublic.com.com/5100-10878_11-5690240.html
Hope to Help !!
Ganesh.H
If helpful do rate the post -
Not getting mail from pop server
If I click on "get account info" for the account the mail appears in the all messages on pop server, but when I click get mail it doesn't download them to the inbox.
If I delete the account and add it back in it seems to download the latest 100 messages, but won't get any new ones unless I delete and re add the account.
Any Ideas?
Mail
v 4.3 (1081) on 10.6.4JohnPaull,
I am having this same issue as I need to re-create an account to get mail to work again.
Did you ever resolve this issue? Anything you can help me with?
thanks.
mail
Version 4.3 -
Mails are not getting deleted from server
Hi
I am reading a mail from using java mail from my mail server.
When i am setting the message.setFlag(Flag.DETELED,true);
the mail is not getting deleted from the server.
I am not able to trace the problem, please help me solving this problem. It's a bit urgent.
store = session.getStore("pop3");
store.connect(hName, portNo, uName, pWord);
folder = store.getFolder("INBOX");
folder.open(Folder.READ_WRITE);
Message message[] = folder.getMessages();
System.out.println("Unread Msg Count : " + folder.getUnreadMessageCount());
int n = message.length;
for (int i = 0; i < n; i++) {
fromMsg = (message.getFrom()[0]).toString();
subMsg = (message[i].getSubject()).toString();
if (folder instanceof POP3Folder) {
POP3Folder pf = (POP3Folder) folder;
Part messagePart = message[i];
content = messagePart.getContent();
if (content instanceof Multipart)
messagePart = ((Multipart) content).getBodyPart(0);
String contentType = messagePart.getContentType();
Part messagePart = message[i];
content = messagePart.getContent();
if (content instanceof Multipart){
messagePart = ((Multipart) content).getBodyPart(0);
String contentType = messagePart.getContentType();
message[i].setFlag(Flag.DELETED, true);
store.close();
Thanks and Regards,
Luv Amieee...
xxyeah true...
i did not close the folder.
i got to know from sun faq only later on yesterday.
but still.. thanks a lot...
luv amieee..
xx -
L2L issue, the tunnel does not getting up from one direction
Hello,
We have configure a L2L vpn between Asa and 1841 router. We are facing this issue.
The tunnel is not getting up from the 1841 site never. When we are trying to generate traffic from the ASA site the tunnel is up and we can see decryps and encryps packets.
Router 1841 Config:
crypto isakmp policy 100
encr 3des
hash md5
authentication pre-share
group 2
crypto isakmp key * address 213.249.XX.XX
crypto ipsec transform-set XXXXX esp-3des esp-md5-hmac
crypto map EKO_BG 100 ipsec-isakmp
set peer 213.249.x.x
set security-association lifetime seconds 28800
set transform-set XXXXX
set pfs group2
match address 111
interface FastEthernet0/0.2
encapsulation dot1Q 3338
ip address 212.200.30.130 255.255.255.252
ip nat outside
ip virtual-reassembly
crypto map XXXXX
ip nat pool nat_pool 93.87.XX.XX 93.87.XX.XX prefix-length 29
ip nat inside source list 101 pool nat_pool overload
ip nat inside source static 10.70.2.10 93.87.18.161
ip nat inside source static 10.70.25.10 93.87.18.162
ip nat inside source static 10.70.36.5 93.87.18.163
ip nat inside source static 10.70.39.10 93.87.18.164
ip nat inside source static 10.70.5.10 93.87.18.165
access-list 101 deny ip 10.70.200.0 0.0.0.255 any
access-list 101 permit ip 10.70.0.0 0.0.255.255 any
access-list 111 permit ip 10.70.200.0 0.0.0.255 172.40.10.100 0.0.0.3
Asa Config:
access-list inside_nat0_outbound extended permit ip 172.40.10.100 255.255.255.252 10.70.200.0 255.255.255.0
access-list outside_cryptomap_320 remark xxxxxxx
access-list outside_cryptomap_320 extended permit ip 172.40.10.100 255.255.255.252 10.70.200.0 255.255.255.0
access-list inside_pnat_outbound_V5 extended permit ip host 10.8.x.x 10.70.200.0 255.255.255.0
pager lines 24
nat (inside) 9 access-list inside_pnat_outbound_V5
crypto ipsec transform-set xxxxx esp-3des esp-md5-hmac
crypto map mymap 150 match address
crypto map mymap 150 set pfs
crypto map mymap 150 set peer XXXXXX
crypto map mymap 150 set transform-set XXX
crypto map mymap 150 set security-association lifetime seconds 28800
crypto map mymap 150 set security-association lifetime kilobytes 10000
crypto map mymap 320 match address outside_cryptomap_320
crypto map mymap 320 set pfs
crypto map mymap 320 set peer XXXXX
crypto map mymap 320 set transform-set XXXXX
crypto map mymap 320 set security-association lifetime seconds 28800
crypto map mymap 320 set security-association lifetime kilobytes 4608000
crypto map mymap 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map mymap interface outside
isakmp policy 150 authentication pre-share
isakmp policy 150 encryption 3des
isakmp policy 150 hash md5
isakmp policy 150 group 2
tunnel-group 212.200.x.x type ipsec-l2l
tunnel-group 212.200.x.x ipsec-attributes
pre-shared-key *
Please advise.
Thank you.hello Ashley,
thank you for this info. Now from the router site the tunneling is getting up and I can see packets but althought the tunnel is up it can not make telnet to our server (172.40.10.100) on a specific port.
We from ASA site can ping router Site and make telnet.
Any ideas???
Thank you all from your answers! -
Mail notifications are not getting sent from a Calendar client
Mail notifications are not getting sent from a Calendar client
<p>
On the client, after creating an event and electing to send a mail notification,
the following error appears in a pop up box:
"module:mailmsg.ctp,label 190, service error"
Also, in the /users/unison/log/cws.log file on the Calendar Server, there is an
error from the corresponding time that the client receives one:
DEXOTEK ERRCODE Ox132B0 -> CWTCP_RemoteSecurityModified: RNC_SecurityModified
-> Request 0x443 for NodeId 10002,
status set to CANTSERVICE
Solution:
If this is only happening for one user, then check for the presence of a dbv.log
file in the /users/unison/log directory. If present this implies db corruption
and the /users/unison/bin/unidbfix tool should be run.
Note: For details on "unidbfix", please read the man page and also the online
Calendar Administrators Guide.I am having the exact same problem sending through a comcast smtp server to a mac.com email address:
Reporting-MTA: dns; qmta11.emeryville.ca.mail.comcast.net
so some problem they are having in emeryville today? I too am waiting for it to clear up. -
Safari could not open page because the server stopped responding
"Could Not Open Page.... Safari could not open page because the server stopped responding"
....but it could worked just fine for the first 2 weeks of iPhone4 ownership.
WiFi network at home, working fine with MacBook, visiting friends' phones, my new iPhone4 - no problems. Had to power down the modem & router very briefly last night. Rebooted, MacBook connected fine, iPhone doesn't - it goes through the motions - shows all signs of full connection, full signal, password accepted etc etc - but web pages will not open, displaying after 30 secs the warning message above.
Tried at work on another wireless network - same response.
Have gone through all the FAQs, reset network settings, forgotten network etc - still nothing.
Anyone experienced the same and fixed it?
cheersI'm having a very similar problem, but it's with my 3G connection, not with wifi. The display tells me there is 3G connectivity, and I get the loading symbol, but pages stop loading a few seconds after I try to open them, and some time later I get the "server stopped responding" message. That happens with addresses I know are working, such as Google. Some times, restarting the iPhone or the internet connection (by switching plane mode on and off) solves the issue, but it has been happening often these days.
-
"This message has not been downloaded from the server"
Hello, Ever since ive had an iPhone and have used Edge to open a resaonably sized email i usually get "This message has not been downloaded from the server". Im sure this has to do with the slow Edge network timing out. How do you correct this if there is no "Download Now" button. The only solution I have found was to force quit the Mail App (Hold Home button for 6 seconds) and go back in and pray that it downloads without timing out.
There was a thread on this yesterday that stated that if there is more message it may take four to five minutes to download the entire message and/or attachments.
One poster even said that it has taken him over 30 minutes in some cases.
I have this same problem on some email and on others the entire email is downloaded, including any attachments. Since there is no communication put out by Apple regarding this anomaly, it is hard to say whether this a an Apple or provider, i.e., Google or Yahoo. -
SPED inbound delivery creation, serial num not getting copied from out delv
We enabled SPED to create inbound delivery against outbound delivery
We observed Serial numbers are not getting copied from outbound delivery to inbound deliver
can some one help
Moderator message:
Locked. Reason: duplicate.
The new post: STO GR against outbound delivery/inbound delivery
Edited by: Csaba Szommer on Jan 9, 2012 4:16 PMHello Mohammed,
Go through these SAP Help Pages for Delivery Creation from SAP TM. It will help you to check where have you gone wrong is the setup.
Creation of ERP Deliveries from SAP TM:
ERP Logistics Integration - SAP Library
Creation of Delivery Proposals:
Creation of Delivery Proposals - ERP Logistics Integration - SAP Library
Monitoring of Delivery Creation:
Monitoring of Delivery Creation - ERP Logistics Integration - SAP Library
Kindly let me know if it works, or else give me some more detail regarding your steps you are doing and your scenario. It might be helpful to understand and then I can provide you a solution.
Thanks and best regards,
Navin
Maybe you are looking for
-
hi-i need help- when i try to print a cd jewel case insert(i did this many times)the songs side will print out on top of each other like one big glob-and the other half the photo of album comes out correct-i thought it was my old printer so of course
-
Buttons inside moveiclip not accessible
Hi, I am making this website, which contains a load file, which contains a movieclip holder, which holds all the different parts of the website. Now within the portfolio.swf, which is within mcholdr, inside load.swf, there are several images, which a
-
As2 Inbound message processing
Hi Am trying process custom xml using AS2 protocol but facing error while document Identifaction.It is throwing error as B2B-50547 Agreement not found for trading partners: FromTP null, ToTP MyCompany Here is what I have done. Created Custom document
-
I'm learning now how to add text to a Quicktime movie. In fact I can add text, and change some parameters in the text descriptor. What I don't yet understand is how to use textbox: it seems to me that it doesn't behave as described in the QT Tutorial
-
Custom Report in PDF output, blurred after printing in concurrent
Hi, We have a customized report which is the output is in PDF. We tried to print it in concurrent, but the output is blurred and not clear enough. The following are the setup made. 1. Server OS -> Linux 5(OEL5) 2. Printer -> EPSON, Dot Matrix 3. Driv