Not getting prompt for 2nd layer when writing DLT

I am using DVDSP3. Trying to write a dual layer DVD-9. When I attempt to format it goes through the motions and writes both layers onto 1 tape. IFrom what I have read I am supposed to be prompted for the second tape. I have double checked my settings and they are all correct. I have marked for dual layer, one side, I let DVDSP set my breakpoint, 12 cm, OTP.
I have searched the forum and found that the question was posed before and a couple of people alluded to the fact that there was a fix for this but they couldn't remember. Does anyone know anything about this?
Thanks in advance

Resolution- Either I just need a couple of days off or the drive was just being cranky but it is working now. I don't know if I turned things on in the wrong order before or what exactly made it work correctly but as we speak I am writing tape #2. So if anyone has this problem in the future make sure your tape is in securely and try powering everything back down and up. That's all I did.

Similar Messages

Since upgrading to iOS 6 I am not getting prompted for my password when I update apps. Why is this?

When I updated apps on my ipad2 and iphone4S I used to get prompted for my password within a certain time. So I could update a couple and then 10 minutes later if I wanted to download or update something else I would need to put in my password again. Since I upgraded to iOS6, I don't believe I am prompted for my password the same amount of times. I updated an app this am after not using iPad through the night and it just updated, no password required. This has me concerned now because sometimes I bump buttons by accident and now I will be charged for these accidents. What has happened to Apple's brilliant security?

They've changed it in iOS and updates (and updates ONLY) do not require a password since it is really unnecessary as they have it on record that you were the one who bought the app. Why is more security needed, you aren't going to be charged for anything?
Next time you update and app go to the App Store and try to buy something. You will be asked for your password.

SAP R/3 -- Not getting prompted for password on Heterogeneous Sys. Copy

Thank you in advance. I am part of a project team that is testing the potential of moving from UNIX (AIX 5.3) to Linux (RHEL 4 or 5). We are running SAP R/3 on IBM P570 with DB2 v9.1 and when we run this program: Installation master sapinst
We are not getting prompted for the user password but when we run the same cd on a different system we get prompted for the user's password. Can anyone point me in the right direction on what is wrong? If you need more info let me know.
Thanks,
Erik

@ Sven & Markus
Well I have checked all the logs and there are no errors. What I have found out is that it successfully runs but there is 0 ouput, in essence it isn't exporting any data.
Here it shows that it completed successfully but in the export directory there isn't data when there should be.
INFO 2009-10-08 17:34:19.270 [sixxcstepexecute.cpp:544]
The installation of component Execution of Service SAP ERP 6.0 Support Release 3 > Software Life-Cycle Options > System Copy
> IBM DB2 for Linux, UNIX, and Windows > Source System Export > Central System > Based on AS ABAP > Database Instance Export has been completed successfully has been completed successfully.
See here:
/dev/exportlv 119.25 119.23 1% 16 1% /export
Thanks,
Erik

Why do i get prompted for a password when sending texts

I just updated my phone to the iOS 6 and now whenever I try to send a text message to a non iphone user i get promted to enter my apple password. How do I fix this??

http://kb.mozillazine.org/Password_not_remembered_%28Thunderbird%29

I get asked for a password when i did not yet set one (after a system reset for the same problem)

I am getting asked for a password when i have yet to set one. I have already done a reset and am still getting prompted for a password, which I do not know.

If you can't remember the Restrictions passcode you have to either:
- Restore the iPod from a backup that does not have the passcode, or
- Restore the iPod to factory settings/new iPod.
iTunes: Backing up, updating, and restoring iOS software

Installing microsoft office for mac and getting prompt for installer password. i have put in apple id password and admin password and not working, i have also reset my admin password 3 times and it is still not working? how do i get past this?

installing microsoft office for mac and getting prompt for installer password. i have put in apple id password and admin password and not working, i have also reset my admin password 3 times and it is still not working? how do i get past this?

You don't use your Apple ID or its password to install anything on your Mac. You use the admin account's name and password.
Use the name and password you last entered when resetting them. The "name" you use is not the short name of the admin account folder.
For example. If you create an admin account of John Smith, the short name given to that account's folder will be johnsmith. So when an app requests an admin name and password to install something, the admin name you enter is John Smith, not johnsmith.

[svn:bz-trunk] 21394: bug fix for watson 2887837 Not getting duplicate session detected error when same flex client id is used from two different HTTP sessions in CRX .

Revision: 21394
Revision: 21394
Author:   [email protected]
Date:     2011-06-16 12:34:13 -0700 (Thu, 16 Jun 2011)
Log Message:
bug fix for watson 2887837 Not getting duplicate session detected error when same flex client id is used from two different HTTP sessions in CRX.
get the sessions id before we invalidate the duplicate session.
Checkintests pass
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseHTTPEndpoint.java

For our profect I think this issue was caused as follows:
Believing that remoting was full asynchronous we fired a 2 or 3 remote calls to the server at the same time ( within the same function ) - usually when the users goes to a new section of the app.
This seemed to trigger the duplicate http session error since according to http://blogs.adobe.com/lin/2011/05/duplication-session-error.html two remote calls arriving before a session is created will cause 2 sessions to be created.
Our current solution ( too early to say it works ) is to daisy chain the multiple calls together .
Also there seemed to be an issue where mobile apps that never quit ( thanks Apple! ) caused the error when activated after a few hours.
I guess the session expires on the server and the error above occurs on activation.
So the mobile apps now ping the server with a remote call when activated after sleeping for more than one hour.
All duplicate http errors are silently caught and reported.
Fingers crossed we won't get any more!

I keep getting prompted for my exchange password for my work email when I try to update

I keep getting prompted for my exchange password for my work email when I try to check/update for new emails. Any resolution other than "contact IT"?
Thanks

Enter the correct password in the account under Settings > Mail, Contacts, and Calendars.

RBA GATP check is not getting invoked for Sales Order

Hi Everyone,
RBA GATP check is not getting invoked for Sales order.
I maintained the configuration settings for 'Rules-Based Availability Check', APO general settings (check mode, check instruction), carried out integrated rule maintenance, Rule determination for the combination of order type & product, associated the check mode to product master. Also maintained all the settings in ECC towards Req class, Req type, checking control etc.
However, sales order is not invoking RBA Check though it is showing up the 'Rule' icon in the screen. Also, in the APO Availability check in Sales order when I click onto 'check instruction', I get the checking mode that pertains to RBA for business event 'A' (Sales order). Though I have not maintained any stock for the main material for which I have the sales order, yet system is confirming any quantity that I put in.
I would expect that system would propose the same material in an alternate location where we have stock through RBA.
Request you to share ideas on this.
Regards,
Avijit Dutta

Hi Avijit,
You should used No Checking Horizon in Checking instructions and also Check your rule control settings.
What you have defined in 1st and 2nd steps. Check whether product substitution is carried out or Location Substitution.
Thanks,
Bala.

'Releasestepcreated' not getting triggered for PR generated through MRP run

Hi,
I have PR Release strategy workflow configured, working well when i try to create PR manually, triggers workflow.
PR's created thorugh MRP run, triggers release strategy but not workflow.
I checked the event trace 'releasestepcreated' event not triggered through MRP run.
Please respond ASAP.
Your inputs will be highly appreciated.

Short Text
Workflow with multiple workitems
Long Text
Refering SAP notes that i came to know that workflow is not supported
through MRP run (md03/md04).we are not using Planned orders.
To trigger workflow for Purchase requisitions created by MRP run, we
have developed a custom report to trigger workflow explicitly.
1.MRP batch job runs every night. After MRP job,planned to schedule
another job to trigger workflow for PR's created MRP run.
2. Used FM 'SAP_WAPI_CREATE_EVENT' to trigger workflow.
3. PR requires 5 levels of approvals based on release strategy
configuration.
4. The issue is PR 'XXX' created and waiting for approval in agent's
inbox.When 2nd day MPR runs same PR 'XXX' effected, another
workitem for the same PR in agent's inbox.
We have multiple workitems for the same PR in agent's Inbox.
If i execute one of the workitem,releases PR, multiple workitems are
getting generated for 2nd level approval for the same PR.
Please give your inputs to resolve this issue.

Office prompts for windows login, when i'm trying to save edited document

Hello, i'm trying to disable webdav in office 2010.
My setup is: Apache 2.2.4 with Kerberos "mod_auth_kerb" enabled, works fine.
So fare i have this config:
.htaccess:
RewriteCond %{REQUEST_METHOD} ^(OPTIONS|PROPFIND|HEAD)$ [NC]
RewriteCond %{HTTP_USER_AGENT} ^Microsoft\ Office\ Core\ Storage\ Infrastructure.*$ [OR]
RewriteCond %{HTTP_USER_AGENT} ^Microsoft\ Office\ Protocol\ Discovery [OR]
RewriteCond %{HTTP_USER_AGENT} ^Microsoft\ Office\ Existence\ Discovery [OR]
RewriteCond %{HTTP_USER_AGENT} ^Microsoft\-WebDAV\-MiniRedir.*$
RewriteRule .* - [R=501,L]
This config, disables the login, which came everytime i opened the document in Internet Explorer.
But when document is opened and i want to save the document, i get a windows login prompt.
This is my access log, which shows office tries to access the webserver, but anonymously.
10.0.0.123 - - [22/Jan/2014:15:21:18 +0100] "OPTIONS /files/tool/ HTTP/1.1" 401 762 "-" "Microsoft Office Protocol Discovery"
10.0.0.123 - [email protected] [22/Jan/2014:15:21:18 +0100] "OPTIONS /files/tool/ HTTP/1.1" 501 776 "-" "Microsoft Office Protocol Discovery"
10.0.0.123 - [email protected] [22/Jan/2014:15:21:18 +0100] "OPTIONS /files/tool/ HTTP/1.1" 501 776 "-" "Microsoft Office Protocol Discovery"
10.0.0.123 - [email protected] [22/Jan/2014:15:21:18 +0100] "OPTIONS /files/tool/ HTTP/1.1" 501 776 "-" "Microsoft Office Protocol Discovery"
10.0.0.123 - - [22/Jan/2014:15:21:18 +0100] "HEAD /files/file.doc HTTP/1.1" 401 272 "-" "Microsoft Office Existence Discovery"
10.0.0.123 - [email protected] [22/Jan/2014:15:21:18 +0100] "HEAD /files/file.doc HTTP/1.1" 501 447 "-" "Microsoft Office Existence Discovery"
10.0.0.123 - [email protected] [22/Jan/2014:15:21:18 +0100] "GET /files/file.doc HTTP/1.1" 304 456 "-" "Microsoft Office Core Storage Infrastructure/1.0"
10.0.0.123 - [email protected] [22/Jan/2014:15:21:18 +0100] "PROPFIND /files/file.doc HTTP/1.1" 501 807 "-" "Microsoft Office Core Storage Infrastructure/1.0"
10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS /files/ HTTP/1.1" 401 762 "-" "Microsoft Office Protocol Discovery"
10.0.0.123 - [email protected] [22/Jan/2014:15:21:24 +0100] "OPTIONS /files/ HTTP/1.1" 501 771 "-" "Microsoft Office Protocol Discovery"
10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 762 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
10.0.0.123 - - [22/Jan/2014:15:21:24 +0100] "OPTIONS / HTTP/1.1" 401 761 "-" "Microsoft-WebDAV-MiniRedir/6.1.7601"
I have tried this "fix it tool": http://support.microsoft.com/kb/2123563
What am i missing?
And why is office talking to the server anonymously ?
Jakob Olsen

Hello,
in addition to my question here: http://social.technet.microsoft.com/Forums/office/en-US/eb068660-5ded-411e-bfc1-6f18ba7bc585/office-prompts-for-windows-login-when-im-trying-to-save-edited-document?forum=officeitproprevious
Can someone tell my, how does the Microsoft Office Single Sign on work ?
From what i understand, ms office opens the document (when through IE) and tries to create a webdav connection.
I have tried to disable the webdav on apache.
But the entire webserver is mod_auth_kerb "protected".
And in the access-log, i can see this:
IP, DATETIME, [email protected] document....
But also: IP, DATETIME - document <--- None authenticated user... Why does microsoft not use the current user?
I have tried to ssl enable the website, which i read in this thread: http://support.microsoft.com/kb/2123563
But Microsoft Office stills act as anonymous user.
Jakob Olsen

Proposals are not getting generated for BOM items in MD50

Hi Gurus,
I have maintained strategy 50 in MRP for header material , Item category gp as LUMF & maintained consumption parameters in material master .
For dependent requirements i have maintained BOM for production & sales usage, Strategy is blank as it is customer specific component , Item category gp is NORM , individual requirements i.e 1 in MRP 4 view.
MRP type is PD in both materials.
When i run a MRP thru' MD50 after getting customer order.
it is not planning my dependent requirements i.e. proposals are not getting generated for dependent requirements (BOM materials).
Please let me know the solution.
Thanx in advance
Regards,
Nagraj Vasmate

try to use strategy 20

SQLloder scripts not getting generated for CLOBs

I am trying to migrate MYSQL 3.23 database into Oracle 8.1.7 and after creating the Oracle model and after converting the MYSQL text datatype into CLOB of the Oracle model the SQLloader scripts is not getting generated for CLOB datatypes. I mean the scripts are getting created but there is no change in the script for CLOB datatype.
The script generates the following for the table containing CLOB datatypes:
mysqldump -h <HOST> -u <USERNAME> -p<PASSWORD> -T <DESTINATION_PATH> fields-terminated-by="<ec>" lines-terminated-by="<er>" test av_wbt_course
Please let me know how to load data when the datatype is of CLOB ?

I was able to resolve this issue by using OWM Oracle Migration instead of using offline method by sqlloader scripts.

VA00 condition type not getting determined for the returns order

Hi All,
I have a case where VA00 condition type not getting determined for the returns order that has been created with respect to the billing document.
When the pricing conditions are being copied from invoice it is getting copied but later it is getting deleted in the include LV61AA42.
Note:VA00 condition type is getting deleted from the internal table tkomv[].
If any one came across this scenario can you please help me.
Request your valuable inputs

Hi,
Please check the copy control setting in VTAA.
Maintain the pricing type as "D" at item category level for the respective document type .
Hope this will resolve your issue.
Regards,
Krishna O

Java.lang.Exception: Could not get name for DC project

Hello Experts,
We have a code which is downloaded from SVN repository.
I have imported the code from my desktop into NWDS and when I try to deploy it throws,
java.lang.Exception: Could not get name for DC project
I have referred few threads in SCN and solution suggested is to change the workspace and create a new DC & copy the _comp from old DC.
I tried the above solution but there are lot of build errors as we have few RFC models and it is throwing build errors for missing model reference.
Kindly help me on how to fix the error.
Thanks, Swarnaprakash

Dear Swarnaprakash,
The Web Dynpro DCs Import C:\----\user\.dtc\LocalDevelopment\DCs\sap.com\test and
the related package for DC is missing once check it after try to import.
Depending on which Java compiler preferences are set, you may see some
warnings in the "Task" view after importing the project. If the severity level for problems of type "Unused imports" (set in Preferences – Java – Compiler) has the value "Warning", the compiler will issue a warning for unused import references. Ignore these warnings!
Still You getting means delete your .metadata before take the backup.after open the NWDS again it will set new configurations in your system.
Thanks & Regards,
Durga Rao.

Not getting prompt for 2nd layer when writing DLT

Similar Messages

Maybe you are looking for